Teyleten Robot - Buying Guide
Last Updated: 05/17/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load：The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 pounds
Warranty: no
See On Amazon #2
Teyleten Robot DHT22 / AM2302 Digital Temperature Humidity Sensor Module for Arduino Replace SHT11 SHT15 (3pcs)
Asin: B0CPHQC9SF | Model: H57- | PartNumber: H57-
Humidity Measurement Accuracy: ± 2%Rh.
Single Bus Digital Signal Output, Serial Data Bidirectional Port.
Temperature Measurement Range: -40---80℃.
Humidity Measurement Range: 0 --- 100% Rh.
Features
- Working voltage: DC 3.3-5.5V
- humidity measurement range: 0 --- 100% RH
- humidity measurement accuracy: 2%RH
- Temperature measurement range: -40---80
- Single bus digital signal output, serial data bidirectional port
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #3
Teyleten Robot ADS1115 16 Bits 4 Channel Analog-to-Digital Converter Precised Develop Board Module Amplifier Board ADC I2C IIC for Arduino Raspberry Pi (Pack of 3pcs)
Asin: B0CNV9G4K1 | Model: B38- | PartNumber: B38-
Single-Shot Mode: Auto Shut Down; Programmable Data Rate: 8Sps-860Sps.
Internal Pga Up To 860 Samples Per Second (Sps). An Onboard Pga Is Available On The Ads1114 And Ads1115 That.
Features
- WIDE SUPPLY RANGE: 2.0V to 5.5V bits of resolution offered in an ultra-small, leadless
- INTERNAL PGA up to 860 samples per second (SPS). An onboard PGA is available on the ADS1114 and ADS1115 that
- Single-Shot Mode: Auto Shut Down; Programmable data rate: 8sps-860sps
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.08 x 1.08 x 0.67 inches
See On Amazon #4
Teyleten Robot TMC2209 V2.0 Stepper Motor Driver StepStick 2.5A UART Ultra Silent for Nano SKR V1.3/1.4 Ender 3 Control Board 3D Printer Parts Replace A4988 5pcs
Asin: B09BK57KNY | Model: G78-1 | PartNumber: G78-1 | Ean: 0755454774471 | UPC: 755454774471
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.51 x 0.81 x 0.61 inches
See On Amazon #5
Teyleten Robot PCM5102 PCM5102A AUX Stereo Digital Audio DAC Decoder Board Module Voice Module Player Module Digital-to-Analog Converter IIS I2S for Arduino Raspberry Pi (3PCS)
Asin: B09C5QX228 | Model: 3 | PartNumber: 3 | Ean: 0755454865971 | UPC: 755454865971
Line Out Stereo Jack;Phat Format Board;Uses The Pcm5102a Dac To Work With The Raspberry Pi I2s Interface.
Features
- The DAC Module provides a super affordable high-quality DAC for the Raspberry Pi.Since it's digital audio, it sounds really good, much better than the onboard analog audio. The stereo jack comes soldered onto the board already.
- Line out stereo jack;pHAT format board;Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 3.94 x 12.60 x 6.69 inches
See On Amazon #6
Teyleten Robot 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)
Asin: B0CP92T4QR
Can Interface Directly With 3.3V And 5V Systems.
4 Layer 2 Ounces Of Copper Pcb, In Order To Improve Heat Dissipation.
Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection.
Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step.
Features
- Simple Steps And Direction Control Interface
- Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step
- CAN Interface Directly With 3.3V And 5V Systems
- Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection
- 4 Layer 2 Ounces Of Copper PCB, In Order To Improve Heat Dissipation
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #7
Teyleten Robot KY-040 Rotary Encoder Brick Sensor Module Switch Development 360 Degrees with Knobs Cap for Arduino AVR PIC 5pcs
Asin: B087ZQLLWQ | Model: K10 | PartNumber: K10 | Ean: 8424511443750
Number Of Pulses In One Cycle: 20.
Working Voltage: 5V.
Features
- The rotary encoder can count the number of output pulses in the positive and negative directions by rotation. Unlike potentiometers, the rotation count is unlimited. With the key on the rotary encoder, it can be reset to the initial state, that is, counting from 0.
- Working voltage: 5V
- Number of pulses in one cycle: 20
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot S o n g e h
Dimensions: 11.42 x 12.20 x 7.48 inches
See On Amazon #8
Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 5pcs
Asin: B095SBYB95 | Ean: 6438112394283
Chip Built-In 16Bit Ad Converter, 16-Bit Data Output.
Acceleration Range: ±2 ±4 ±8 ±16G,Pin Pitch 2.54Mm.
Gyroscopes Range: +/- 250 500 1000 2000 Degree/Sec.
Communication Modes: Standard Iic Communications Protocol.
Features
- Power supply :3-5v (internal low dropout regulator)
- Communication modes: standard IIC communications protocol
- Chip built-in 16bit AD converter, 16-bit data output
- Gyroscopes range: +/- 250 500 1000 2000 degree/sec
- Acceleration range: 2 4 8 16g,Pin pitch 2.54mm
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.12 x 0.79 x 0.59 inches
See On Amazon #9
Teyleten Robot DC 5V-36V 15A Max 30A 400W Dual High-Power MOSFET Trigger Switch Drive Module 0-20KHz PWM Adjustment Electronic Switch Control Board DC Motor Speed Controller for Arduino 10pcs
Asin: B0893MKNB2 | Model: D97 | PartNumber: D97 | Ean: 8424514770037
Easily Realize The Control Of High-Power Equipment.
Wide Voltage, Support Pwm.
Features
- 1. Using dual MOS parallel active output, lower internal resistance, larger current, strong power, 15A, 400W at room temperature, which meets the use of most equipment
- Wide voltage, support PWM
- Easily realize the control of high-power equipment
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.47 x 1.34 x 0.67 inches
See On Amazon #10
Teyleten Robot BTS7960 43A High Power H-Bridge DC Motor Driver Module DC Motor Controller Module for Arduino Smart Car 2pcs
Asin: B099N8XS5P | Model: C9- | PartNumber: C9- | Ean: 9339272399118
Double Bts7960 H-Bridge Driver Circuit, With A Strong Drive And Braking, Effectively Isolating The Microcontroller And Motor Driver.
5V Power Indicator On Board; Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink; Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2).
High-Current 43A Features: Double Bts7960 Large Current (43 A) H Bridge Driver; 5V Isolate With Mcu, And Effectively Protect Mcu.
This Driver Uses Infineon Chips Bts7960 Composed Of High-Power Drive Full H-Bridge Driver Module With Thermal Over-Current Protection.
Features
- Since the pin header is easily broken, we have added foam to the pin header
- This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection
- Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver
- High-current 43A Features: Double BTS7960 large current (43 A) H bridge driver; 5V isolate with MCU, and effectively protect MCU
- 5V power indicator on board; voltage indication of motor driver output end; can solder heat sink; Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2)
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #11
Teyleten Robot GY-906 MLX90614 MLX90614ESF Non Contact IR Infrared Temperature Sensor Module IIC I2C for Arduino
Asin: B0CLDGFQYS
Temperature Measurement Error: ±0.5℃ (At Room Temperature) Resolution 0.02℃.
Operating Environment Temperature -40～125℃.
Working Voltage: 3.3V～5V.
Temperature Measurement Range: -70℃～382.2℃.
Features
- Digital interface type: IIC (slave mode) or PWM
- Temperature measurement range: -70 382.2
- Temperature measurement error: 0.5 (at room temperature) resolution 0.02
- Working voltage: 3.3V 5V
- Operating environment temperature -40 125
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #12
Teyleten Robot 5pcs ULN2003 28BYJ 48 5V 4-Phase Stepper Motor with 5V Stepper Drive Board for Arduino PI PIC Raspberry Pi
Asin: B08HCS369F | Model: ULN2003+28BYJ-48 | PartNumber: ULN2003+28BYJ-48 | Ean: 8425520537799
It Also Can Be Connected As 2 Phase To Use.
Diameter: 27Mm;Voltage: 5V; 12V;Step Angle: 5.625 X 1/64;Reduction Ratio: 1/64.
Features
- Gear Stepper Motor DC 5V/12V 4 Phase Step Motor Reduction Step Motor
- Diameter: 27mm;Voltage: 5V; 12V;Step angle: 5.625 x 1/64;Reduction ratio: 1/64
- It also can be connected as 2 phase to use
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.38 x 1.36 x 1.26 inches
See On Amazon #13
Teyleten Robot AC 110V 120V 220V 230V 10000W High Power SCR Motor Speed Controller Board Dimming/Attemperation/Voltage/Regulator/Thermoregulation/SCR Controller Board
Asin: B0894LG58M | Ean: 8424515611766
Voltage Regulation: Ac 10V To 220Vac.
Rated Current:25A Max 45A.
Dimensions: 130X60x45mm(Lxwxh).
Maximum Power: 10000W (Connected Resistive Load,220Vac).
Features
- Voltage: AC 110- 220V
- Maximum Power: 10000W (connected resistive load,220VAC)
- Voltage Regulation: AC 10V to 220VAC
- Dimensions: 130x60x45mm(LxWxH)
- Rated current:25A MAX 45A
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: A71
Dimensions: 1.85 x 5.12 x 2.36 inches
See On Amazon #14
Teyleten Robot GY- BNO085 AR VR IMU High Accuracy Nine-Axis 9DOF AHRS Sensor Module Better Than BNO080 BNO055
Asin: B0CL26J81F
Uart: 3Mbps.
Uart-Rvc: 115200Kbps.
Spi: Up To 3Mhz.
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #15
Teyleten Robot TB6612FNG Dual DC Stepper Motor Driver Module 1.2A Peak 3.2A Better Than L298N(Pack of 3)
Asin: B08J3S6G2N | Ean: 8425553720601
Input Voltage: 2.7 V – 10.8 V Output Current Of Single H-Bridge: 1.5A.
Can Drive Two Dc Deceleration Motors,Built In Over-Current Protection, Short-Circuit Protection, Under Voltage Locking And Over Temperature Protection,With Low Power Sleep Mode..
Size: 18 * 21Mm.
Features
- pin is black
- Size: 18 * 21mm
- Input voltage: 2.7 V 10.8 V Output current of single H-bridge: 1.5A
- can drive two DC deceleration motors,built in over-current protection, short-circuit protection, under voltage locking and over temperature protection,with low power sleep mode.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.12 x 0.83 x 0.71 inches
See On Amazon #16
Teyleten Robot ADUM3160 Module USB to USB Isolator Board Protection Isolation 1500V with USB 2.0
Asin: B08HHW4DXY | Model: PEKZ-01 | PartNumber: PEKZ-01 | Ean: 8425529928994
Power Module: Isolation Voltage 1500V.
Using The Environment: - 40 ° To 85 °.
Adum3160 Isolation Voltage: 2500V.
Features
- USB Compatible with USB2.0
- ADUM3160 isolation voltage: 2500V
- Power module: isolation voltage 1500V
- Using the environment: - 40 to 85
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #17
Teyleten Robot SCD41 Gas Sensor Module CO2 Carbon Dioxide Temperature and Humidity Gas Sensor Module I2C
Asin: B0C622SS34
Digital I2c Interface.
Low Power Operation To <0.4 Ma Average @ 5 V, 1 Meas./5 Min.
Integrated Temperature And Humidity Sensors.
High Accuracy: ± (40 Ppm+5%).
Features
- Supply voltage range: 2.4-5.5 V
- High accuracy: (40 ppm+5%)
- Digital I2C interface
- Integrated temperature and humidity sensors
- Low power operation to <0.4 mA average @ 5 V, 1 meas./5 min
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #18
Teyleten Robot AS5600 Magnetic Encoder 12bit high Precision Magnetic Induction Angle Measurement Sensor Module 3.3V (5PCS)
Asin: B09LMB3PTZ | Model: A45 | PartNumber: A45 | Ean: 9339036068373
Dir ： Rotational Direction (Ground=Value Increases Clockwise; Thenvcc =Clockwise Values Are Decreased).
Gpo ： Mode Selection (Internal Pull Ground=Programming Modeb).
Scl ： Iicthe Communication Clock Line;Sda ： Iicdata Communication Line.
Vcc ： 3.3V;Gnd ：Power Ground;Out ： Pwm /Analog Voltage Output.
Features
- With Diametric Magnets and pin header
- VCC 3.3V;GND Power Ground;Out PWM /Analog voltage output
- DIR Rotational direction (ground=Value increases clockwise; thenVCC =Clockwise values are decreased)
- SCL IICThe communication clock line;SDA IICData communication line
- GPO Mode selection (internal pull ground=Programming modeB)
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 1.18 x 9.06 x 9.06 inches
See On Amazon #19
Teyleten Robot 5MM LDR Photosensitive Sensor Module Light Dependent Resistor Sensor Module Digital Light Detection LM393 3 pins for Arduino (10PCS)
Asin: B099N5W9F7 | Model: C40- | PartNumber: C40- | Ean: 9339272399347
The Do Output Can Be Directly Connected To Microcontroller, Through Single Chip Microcomputer To Detect The High And Low Level, Thus To Detect The Environment Light Intensity Change;.
The Do Output Can Be Directly Driven Our Relay Module, Which Can Form A Light-Operated Switch..
Module In The Environment Light Intensity Than Set Threshold, Output High Level Do End, When The Environment Light Intensity More Than Set Threshold, The Do Output Low Level;.
Features
- photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc.;
- module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level;
- the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
- the DO output can be directly driven our relay module, which can form a light-operated switch.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 1.26 x 0.55 inches
See On Amazon #20
Teyleten Robot IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino 10pcs
Asin: B08977QFK5 | Ean: 8424515612220
For Other Main Control Boards Or Higher-Level Main Control Boards (Such As Arm), If You Need To Set The I/O Port To Input/Output Mode, You Must Set It To Input Mode/Receive Mode, Otherwise It Cannot Be Used. 51 Series Mcu Can Be Used Directly, No Need To Set Input And Output Mode.
Note: For Arduino Players Should Set The Mcu's I/O Port To Input Mode/Receive Mode, Otherwise It Cannot Be Used..
2. Gnd Gnd Is The Negative Input Port Of The Power Supply. Out Out Is The Signal Output Port, Which Is Connected To The I/O Port Of The Single-Chip Microcomputer. Generally, It Is Connected To An External Interrupt..
Features
- use: 1. +5 +5 is the positive input port of the power supply, which can be connected to a voltage of 3.3V~5V
- 2. GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip microcomputer. Generally, it is connected to an external interrupt.
- For other main control boards or higher-level main control boards (such as Arm), if you need to set the I/O port to input/output mode, you must set it to input mode/receive mode, otherwise it cannot be used. 51 series MCU can be used directly, no need to set input and output mode
- Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #21
Teyleten Robot MCU-219 INA219 I2C interfaces Zero-Drift bi-Directional Current/Power Monitoring Sensor Module for Arduino Raspberry Pi 5pcs
Asin: B0C7L2PC22
Sampling Can Be Averaged Up To 128, In Order To Achieve Filtering In Noisy Environments..
Programmable Calibration Register Can Be Directly Read Current In Amperes, And The Reading Power In Watts..
I2c Interface Has A Timeout Settings, Not Only To Prevent Bus Lock, But May Also Provide High-Speed Mode, To Meet The Communication Requirements Of Up To 3.4 Mhz..
Features
- A single power supply, the operating voltage is between +3.0 to + 5.5V.
- I2C interface has a timeout settings, not only to prevent bus lock, but may also provide high-speed mode, to meet the communication requirements of up to 3.4 MHz.
- Sampling can be averaged up to 128, in order to achieve filtering in noisy environments.
- Programmable calibration register can be directly read current in amperes, and the reading power in watts.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #22
Teyleten Robot MAX9814 Electret Microphone AGC Amplifier Module Auto Gain Control Release Ratio Low THD for Arduino 3pcs
Asin: B0B7SP6GYX | Model: B0B7SP6GYX_CA NARF | PartNumber: B0B7SP6GYX_CA NARF | Ean: 9331632590418
The Device Features A Low-Noise Front-End Amplifier, Variable Gain Amplifier (Vga), Output Amplifier, Microphone Bias Voltage Generator, And Agc Control Circuit.
Features
- The MAX9814 is a low-cost, high-performance microphone amplifier with automatic gain control (AGC) and low-noise microphone bias.
- The device features a low-noise front-end amplifier, variable gain amplifier (VGA), output amplifier, microphone bias voltage generator, and AGC control circuit
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 0.98 x 0.59 inches
See On Amazon #23
Teyleten Robot Si5351A Si5351 5351 8KHz -160MHz High Frequency Signal Generator Breakout Board DC3.3-5V Square Wave Frequency Generator Board Module I2C for Arduino (3pcs)
Asin: B09DM96KGS | Ean: 0768432961893 | UPC: 768432961893
The Si5351 Is An I2c Configurable Clock Generator Ideal For Replacing Crystals, Crystal Oscillators, Vcxos, Phase-Locked Loops (Pll) And Fan-Out Buffers In Cost-Sensitive Applications..
It Uses An Onboard Precision Clock To Drive Multiple Pll And Clock Dividers Through I2c Instructions. The Output Is 3Vpp, Via A Breadboard-Fit Connector Or, For Rf Work, Via The Optional Sma Connector..
It Can Generate Almost Any Frequency, From <8Khz To 150+ Mhz..
Features
- The chip has a precise 25MHz crystal reference and an internal PLL and divider.
- It can generate almost any frequency, from <8KHz to 150+ MHz.
- The Si5351 is an I2C configurable clock generator ideal for replacing crystals, crystal oscillators, VCXOs, phase-locked loops (PLL) and fan-out buffers in cost-sensitive applications.
- It uses an onboard precision clock to drive multiple PLL and clock dividers through I2C instructions. The output is 3Vpp, via a breadboard-fit connector or, for RF work, via the optional SMA connector.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.08 x 1.21 x 0.85 inches
See On Amazon #24
Teyleten Robot GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino 5pcs
Asin: B08HLP1MPY | Model: D21 | PartNumber: D21 | Ean: 8425529930317
Adxl345 Is Very Suitable For Mobile Device Applications. It Can Be Used For Tilt Sensing Applications While Measuring Static Acceleration Of Gravity, And It Can Also Measure The Speed Of Vibration Caused By Dynamic Added Motion Or Caused. With Its High Resolution (4Mg/Lsb), It Can Measure Changes In The Inclination Angle Of About 0.25°. Use Adxl345 Digital Output Timing Acceleration, Etc., No Timing.
Communication Method: Iic / Spi Communication Protocol.
Up To ±16 G Accelerometer With High Resolution (13) Measurement. Digital Output.
With High Resolution (13 Bits) Measurement Up To ±16G. The Digital Output Data Is In 16-Bit Two-Valued Complement Format, Which Can Be Passed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
According To The 16-Bit Two's Complement Format, It Can Be Accessed Through The Digital Interface Spi (3-Wire Or 4-Wire) Or I2c.
Features
- Brand new original ADXL345 chip, quality assurance
- According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25 . Use ADXL345 digital output timing acceleration, etc., no timing
- With high resolution (13 bits) measurement up to 16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
- Communication method: IIC / SPI communication protocol
- Up to 16 g accelerometer with high resolution (13) measurement. Digital output
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 0.00 x 0.00 inches
See On Amazon #25
Teyleten Robot AMG8833 8 * 8 IR Infrared Temperature Thermal Imager Array Camera Imaging Sensors Module I2C 3-5V for Raspberry Pi Arduino
Asin: B0C7KXHXTP
Small.
Power Supply: 3~5V.
Temperature Measurement Range: 0°C To 80°C (32°F To 176°F).
Maximum Frame Rate: 10Hz.
Features
- Accuracy: + - 2.5 C (4.5 F).
- Maximum frame rate: 10Hz
- Small
- Temperature Measurement Range: 0 C to 80 C (32 F to 176 F)
- Power supply: 3~5V
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #26
Teyleten Robot XL6009 XL6009E1 Boost Converter Module DC - DC 3-30V to 5-35V Output Voltage Adjustable Step-up Converter Board Module Better Than LM2577 (10pcs)
Asin: B0CPHZRDBN | Model: K14- | PartNumber: K14-
Built-In 4A High-Efficiency Mosfet Switching Tube, So That The Efficiency Of Up To 94% (Lm2577 Current Is Only 3A).
Voltage Adjustment Rate:±0.5%;Load Adjustment Rate:±0.5%.
Operating Temperature:-40℃~ +85℃.
Output Voltage 5V~45V.
Features
- Input voltage 3V~32V, the best working voltage range is 5~32V
- Output voltage 5V~45V
- Built-in 4A high-efficiency MOSFET switching tube, so that the efficiency of up to 94% (LM2577 current is only 3A)
- Operating Temperature:-40 ~ +85
- Voltage Adjustment Rate: 0.5%;Load Adjustment Rate: 0.5%
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #27
Teyleten Robot Mini 360 Mini360 DC-DC Voltage Power Converter Step Down Module 3A Buck Module RC Airplane Power Step-Down Module 10pcs
Asin: B0CPFDBJ6G | Model: H54- | PartNumber: H54-
Rectification Mode: Synchronous Rectification.
Operating Temperature:-40°C To +85°C.
Conversion Efficiency: 96% (Maximum).
Module Nature: Non-Isolated Buck.
Features
- IC:MP2307DN
- Module nature: non-isolated buck
- Rectification mode: synchronous rectification
- Conversion efficiency: 96% (maximum)
- Operating Temperature:-40 C to +85 C
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #28
Teyleten Robot BME280 5V Digital Temperature Humidity Sensor Atmospheric Barometric Pressure Sensor Board IIC I2C for Arduino 3pcs
Asin: B0B7X4KGCX | Model: BME280 | PartNumber: BME280
It Uses Both I2c And Spi (Supports 3-, 4-Wire Spi) Interface.
Features
- Not only the pressure and the temperature, this sensor can measure humidity
- It uses both I2C and SPI (supports 3-, 4-wire SPI) interface
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 0.53 x 0.42 inches
See On Amazon