BIGTREETECH - Buying Guide
Last Updated: 05/05/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B09LC34SCK | Model: KINGPRINTER-ZZB000590 | PartNumber: KINGPRINTER-ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
【Heating Output】Support Heating Hot End And Hot Bed Output. The Heating Indicator Light Will Light Up When The Heating Hot End Or Hot Bed Is Correctly Connected And Powered On. Please Connect The Wires In A Power-Off State, Otherwise It May Cause Static Breakdown Of The Mosfet And Damage To The Control Board..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Heat Sink Upgrade】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance; There Are 4 Tmc2209 Silent Drivers Onboard The Motherboard..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working; The Fan Port Needs To Ensure That The Fan Voltage Specifications Are Consistent With The Motherboard Power Supply, Otherwise The Fan Will Have No Voltage..
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
- Heating Output Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
- Heat Sink Upgrade Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH S2DW V1.0 Acceleration Sensor Module Compatible Klipper/BIGTREETECH Pi/Raspberry-Pi, High Resolution Tilt-Sensing Accelerometer
Asin: B0CHFMBFCJ | Model: BIGTREETECH S2DW | PartNumber: BIGTREETECH S2DW
【Remarkable Accuracy And Stability】The S2dw V1.0 Features The Lis2dw12tr, Offering The Same Acceleration Measurement Capabilities As The Adxl345. With Higher Sensitivity, Lower Noise, And Improved Temperature Stability, The Lis2dw12tr Achieves Excellent Precision And Consistency. *Data From Stmicroelectronics..
【Product Features】Bigtreetech S2dw Expansion Board Reserves A Boot Button For Users To Update Firmware (This Product Currently Only Supports Klipper Firmware); Reserve Interface Solder Pads For Convenient Diy Soldering By Users..
【Flexible Mounting Options】Method 1: Stealthburner Direct Mount (Effortlessly Install S2dw In The Designated Location, Streamlining The Setup Process And Saving Valuable Time.) Method 2: Nozzle Mount (Attach Near The Nozzle For Precise Measurements. Accessories Included For Easy Installation.).
【Meets The Needs Of Klipper Input Shaping】Embrace The Ease Of Usb-C Plug-And-Play, Designed To Accurately Measure Resonance Frequencies And Minimize Print Rippling, Delivering Exceptional Detail And Precisionin Your 3D Printing..
Features
- Plug-and-Play Effortlessly connect S2DW to your Klippered printer with a simple setup, taking advantage of high-performance MCU hardware SPI for data sampling and communication, and enjoy compatibility with various host systems, easily connect to Raspberry Pi or Manta boards + CB1 with USB ports using a standard USB-A to USB-C cable.
- Meets the Needs of Klipper Input Shaping Embrace the ease of USB-C plug-and-play, designed to accurately measure resonance frequencies and minimize print rippling, delivering exceptional detail and precisionin your 3D printing.
- Remarkable Accuracy and Stability The S2DW V1.0 features the LIS2DW12TR, offering the same acceleration measurement capabilities as the adxl345. With higher sensitivity, lower noise, and improved temperature stability, the LIS2DW12TR achieves excellent precision and consistency. *Data from STMicroelectronics.
- Flexible Mounting Options Method 1: StealthBurner Direct Mount (Effortlessly install S2DW in the designated location, streamlining the setup process and saving valuable time.) Method 2: Nozzle Mount (Attach near the nozzle for precise measurements. Accessories included for easy installation.)
- Product Features BIGTREETECH S2DW expansion board reserves a BOOT button for users to update firmware (this product currently only supports Klipper firmware); Reserve interface solder pads for convenient DIY soldering by users.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #3
BIGTREETECH Direct 6PCS TMC2209 V1.3 Stepper Motor Driver 2.8A UART Ultra Silent Stepsticks Supports Step/DIR Mode for Octopus V1.1/Octopus pro/SKR V1.4 Turbo SKR 3 Manta M4P/M5P/M8P Control Board
Asin: B08WZFK9KT | Model: UUU001793 | PartNumber: UUU001793 | Ean: 0779605800109 | UPC: 779605800109
More Cost-Effective: Bigtreetech Tmc2209 V1.3 Stepper Motor Driver Is Compatible With Existing 3D Printer Electronics On The Market, Eliminating The Expensive Cost Of Redesigning. It Can Perfectly Replace The Original Tmc2100 A4988 Drv8825 Lv8729, With Lower Calorific Value..
After-Sales Service: 1-Year Warranty Is 100% Guaranteed. If You Have Any Questions About This 6Pcs Tmc2209 V1.3 Driver, You Can Contact Us At Any Time Through Amazon, And We Will Give You A Satisfactory Answer..
Terrific Performances:Featured With Rdson Value Of 0.2A, Btt Tmc2209 Uart Stepper Drivers Have Lower Resistance Conducting Output Drivers, Which Provides Them With Less Power Dissipation And Higher Current. The Spreadcycle Provides High-Precision Cycle-By-Cycle Current Control For Highest Dynamic Movements..
Ultra-Silent: The Stealthchop2 Allows For No-Noise, High-Precision Chopper Algorithm For Inaudible Motion And Inaudible Standstill Of The Motor, Making It Super Quiet During Printing. And The Flexible Microplyer Interpolation Unit Provides Up To 256 Subdivisions, Which Can Achieve Perfect Sinusoidal Control Even In Systems With Limited Pulse Frequency..
Features
- Pack of 6 : Comes in 6PCS BTT TMC2209 stepper motor drivers and heatsink. Thanks to the StealthChop2, TMC2209 drirver serves as ultra-quiet stepper motor driver with with a continuous current of up to 2.0A (with peaks of 2.8A). Voltage ranges from 5.5V to the maximun output of 28V.
- Ultra-Silent: The StealthChop2 allows for no-noise, high-precision chopper algorithm for inaudible motion and inaudible standstill of the motor, making it super quiet during printing. And the flexible microPlyer interpolation unit provides up to 256 subdivisions, which can achieve perfect sinusoidal control even in systems with limited pulse frequency.
- More Cost-effective: BIGTREETECH TMC2209 V1.3 stepper motor driver is compatible with existing 3D printer electronics on the market, eliminating the expensive cost of redesigning. It can perfectly replace the original TMC2100 A4988 DRV8825 LV8729, with lower calorific value.
- Terrific Performances:Featured with RDSon value of 0.2A, BTT TMC2209 uart stepper drivers have lower resistance conducting output drivers, which provides them with less power dissipation and higher current. The Spreadcycle provides high-precision cycle-by-cycle current control for highest dynamic movements.
- After-sales Service: 1-Year warranty is 100% guaranteed. If you have any questions about this 6PCS TMC2209 V1.3 driver, you can contact us at any time through Amazon, and we will give you a satisfactory answer.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH DIRECT
See On Amazon #4
BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black
Asin: B09LH727MT | Model: ZZB000590 | PartNumber: ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
⭐【Heat Sink Design Upgrade】Bigtreetech Skr Mini E3 V3.0 Motherboard New Upgraded To Integrated Large Stepping Motor Driver Aluminum Heat Sink,Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Motherboardc Heat Dissipation Performance..
⭐【Fan Upgraded】Bigtreetech Skr Mini E3 V3.0 Motherboard Increase Three Cnc Heat Dissipation Controllable Fan Interface To Reduce The Printer Temperature When The Device Is Working..
⭐【100% Satisfying Customer Services 】Due To Amazon's Return Policy, There May Be Some Problems With The Packaging Of The Products You Receive, We Are Sorry For This Situation, Please Don't Worry, Feel Free To Contact Us, We Will Solve This Problem For You Properly!.
⭐【Multiple Functions】Btt Skr Mini E3 V3.0 Silent Board Supports Bltouch,Microprobe, Rgb Lights,Filament Detection, Automatic Shutdown,Power-Off Reesume, Display Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28/Tft43/Tft50/Tft70 V3.0 Touch Screen As Well As Original 12864 Lcd Of Ender 3 Printer.When Running Klipper Touch Mode，Please Choose Btt Hdmi5 V1.1 Touchscreen.
⭐【Multiple Compatibile】Bigtreetech Skr Mini E3 V3.0 Control Board Integrated Ultra Silent Tmc2209 Uart Stepper Driver,Designed For Ender 3,Plug And Playing,Compatible With Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, The Firmware Is Pre-Install Well Before We Ship Out, You Can Select The Firmware Base On Your Needs..
Features
- Main Control Chip BIGTREETECH SKR Mini E3 V3.0 32 bit control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.
- Multiple Compatibile BIGTREETECH SKR MINI E3 V3.0 control board integrated ultra silent TMC2209 uart stepper driver,designed for Ender 3,Plug and Playing,Compatible with Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
- Heat Sink Design Upgrade BIGTREETECH SKR MINI E3 V3.0 motherboard new upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.
- Multiple Functions BTT SKR MINI E3 V3.0 silent board Supports BLTouch,MicroProbe, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.when running Klipper touch mode Please choose BTT HDMI5 V1.1 touchscreen
- Fan Upgraded BIGTREETECH SKR Mini E3 V3.0 motherboard Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working.
- 100% Satisfying Customer Services Due to Amazon's return policy, there may be some problems with the packaging of the products you receive, we are sorry for this situation, please don't worry, feel free to contact us, we will solve this problem for you properly!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.08 x 2.76 inches
See On Amazon #5
BIQU MicroProbe V2.0 Auto Bed Leveling Sensor kit,3D Printer Bed Leveling Sensor for Ender 3/Ender 3 V2/Ender 3 pro/Ender 3 Max/Voron /H2 Extruder Compatible SKR Mini E3 V3.0,Octopus,Manta,SKR 3
Asin: B0C89G7YH2 | Model: BIQU Microprobe V2.0 | PartNumber: BIQU Microprobe V2.0
✅【Durable And Long Lifespan】Microprobe V2.0 Bed Leveling Sensor Probe Uses Metal Probe, Makes Itself Wear-Resistant And Durable,Removable And Replaceable Probing Pin.With A Long Service Life Of Up To 10,000,000+ Probing Tests, Will Be A Perfect Upgrade For Your Printer.Compatible With Pei/Sticker/Glass/Metal Bed...
✅【Easy Installation】Btt Microprobe V2.0 Auto Bed Leveling Suitable For Ender 3/Ender 3 V2/,Ender 3 Max,Voron Afterburer/Steathlburner,Ratrig Vc3,Biqu B1/ Bx 3D Printer/H2 Series Extruder （The Bracket Stl Can Be Downloaded From Github) And All Fdm Corexy,I3 3D Printer..
❤️【Attentive Service】(Notes:Microprobe Works Differently From Bltouch/Cr Touch, The Firmware Must Be Re-Configured For Microprobe,For Firmware Update And Wiring Installation Tutorials, If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
✅【Wide Application】Biqu Micro Probe Compatible With All Motherboards That Support Bltouch/Cr Touch,Such As Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Skr V1.4 Turbo/ Manta M4p/M5p/M8p/Skr 3/Ez,Manta E3 Ez,Kraken..32 Bit V4.2.7,Mks Gen L Series,.(Skr Mini E3 V3.0 With Microprobe V2 For Ender 3 Firmware And Microprobe And Btt Motherboard Wiring Diagram And Klipper, Marlin, Rrf Firmware Configuration Instructions Have Been Uploaded To Github).
✅[Ultra Light And Small] Bigtreetech Microprobe V2.0 Is 25.3Mm Long And Weighs 6G, Which Is 37% Shorter And 40% Lighter Than 3D Touch, Bl Touch/Cr Touch Automatic Leveling Bed Sensors. It Adds Almost No Weight To The Extruder And Upgrade High-Precision Auto Leveling Capability..
Features
- High Precision BIQU MicroProbe V2.0 auto bed leveling sensor adopts electromagnetic components+photoelectric sensors chip,accuracy is 0.001mm Standard Deviation @24 C,0.003mm Standard Deviation @60 C,Compared to other auto bed leveling sensors, the accuracy is improved by 10 times.
- [Ultra Light and Small] BIGTREETECH Microprobe V2.0 is 25.3mm long and weighs 6g, which is 37% shorter and 40% lighter than 3D touch, BL touch/CR touch automatic leveling bed sensors. it adds almost no weight to the extruder and upgrade high-precision auto leveling capability.
- Durable and Long Lifespan Microprobe V2.0 bed leveling sensor probe uses metal probe, makes itself wear-resistant and durable,Removable and replaceable probing pin.with a long service life of up to 10,000,000+ Probing Tests, will be a perfect upgrade for your printer.compatible with PEI/Sticker/Glass/Metal bed..
- Wide Application biqu Micro probe compatible with all motherboards that support Bltouch/CR touch,such as SKR MINI E3 V3.0/Octopus V1.1/Octopus pro/SKR V1.4 turbo/ Manta M4P/M5P/M8P/SKR 3/EZ,Manta E3 EZ,Kraken..32 Bit V4.2.7,MKS Gen L Series,.(skr mini e3 v3.0 with Microprobe v2 for ender 3 firmware and Microprobe and BTT motherboard wiring diagram and Klipper, Marlin, RRF firmware configuration instructions have been uploaded to Github)
- Easy Installation BTT Microprobe V2.0 auto bed leveling suitable for Ender 3/Ender 3 V2/,Ender 3 Max,Voron Afterburer/SteathlBurner,RatRig VC3,BIQU B1/ BX 3D Printer/H2 series Extruder The bracket STL can be downloaded from Github) and all FDM CoreXY,I3 3D Printer.
- Attentive service (Notes:Microprobe works differently from BLtouch/CR touch, the firmware MUST be re-configured for Microprobe,For firmware update and wiring installation tutorials, If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.09 x 1.14 x 0.39 inches | Weight: 0.01 ounces
See On Amazon #6
BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor Kit+Mount+1M Extension Cable for Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5s CR10 3D Printer with SKR Mini E3 V3.0,Octopus/Manta Board
Asin: B087CQ3RLG | Model: 1 | PartNumber: 1 | Ean: 0779288068124 | UPC: 779288068124
🎅【Simple To Use】Thanks To Its Small And Simple Structure, Bl Touch Auto Leveling Kit Can Be Easily Applied. As Bltouch Works As Usual Auto Bed Leveling Sensor, Gathering Information & Setting Up Your Firmware Will Be An Easy Task. Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials..
🎅【Wide Compatiblity】Bl Touch Auto Bed Leveling Sensor With The Bracket Is Suitable For Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5S, Cr10 3D Printer,Compatible With Skr Mini E3 V3.0,Octopus V1.1/Octopus Pro/Max Ez/Skr V1.4 Turbo,Skr 3/Ez,Manta M8p/M4p/M5p,Manta E3ez,Kraken,Skr Pico,V4.2.7,Mks Gen L...3D Printer Motherboard..
🎅【What You Get】This Kit Consists Of Bltouch V3.1 Auto Leveling Sensor, Mount And 1 Meter Extension Cable, Which May Not Fit Ender 3 Pro Machine. If You Wanna Buy Extra Extension Cable,Please Check The Asin: B08g8b23l7(Copy And Paste On Search Bar)..
🎅【Smart To Use】Bl Touch Auto Bed Leveling Kit Featured With Self-Test, The Push Pin Is Operated Three Times To Test When The Power Is On. Bltouch V3.1 Also Added Other Smart Functions, Like Alarm, Alarm Release, Test Mode For M119, Which Enables User Convenience And Enjoyable Printing..
Features
- High precision ANTCLABS BLTouch V3.1 auto bed leveling sensor s standard deviation in repeatability is around 0.005mm, at that precise.
- Smart to Use bl touch auto bed leveling kit featured with self-test, The push pin is operated three times to test when the power is on. Bltouch V3.1 also added other smart functions, like alarm, alarm release, test mode for M119, which enables user convenience and enjoyable printing.
- Simple to Use Thanks to its small and simple structure, bl touch auto leveling kit can be easily applied. As BLTouch works as usual auto bed leveling sensor, gathering information & setting up your firmware will be an easy task. can be used on heating beds made of glass, wood, metal and other materials.
- What You Get This kit consists of BLTouch V3.1 auto leveling sensor, mount and 1 meter Extension cable, which may not fit ender 3 pro machine. if you wanna buy extra extension cable,please check the Asin: B08G8B23L7(copy and paste on search bar).
- Wide Compatiblity BL touch auto bed leveling sensor with the bracket is suitable for Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5S, CR10 3D Printer,compatible with SKR MINI E3 V3.0,Octopus v1.1/Octopus pro/Max EZ/SKR V1.4 turbo,SKR 3/EZ,Manta M8p/M4p/M5P,Manta e3EZ,Kraken,SKR Pico,V4.2.7,MKS Gen L...3d printer motherboard.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: ANTCLABS
See On Amazon #7
BIGTREETECH Eddy V1.0 High Speed Auto Bed Leveling Sensor for Voron 2.4/Trident,VZbot,CoreXY,I3 Series Running Klipper 3D Printer Compatible with Octopus V1.1,Octopus Pro,SKR Mini E3 V3.0,Manta M8p
Asin: B0D14M62W3 | Model: BIGTREETECH Eddy V1.0 | PartNumber: BIGTREETECH Eddy V1.0
✅Perfect For Voron Stealthburner: Bigtreetech Eddy Current Bed Levelling Sensor Can Be Effortlessly Attached To The Voron 2.4&Trident Pl-08N/Tl-Q5mc2 Location For Quick And Convenient Integration, Suitable For Ender, Corexy, Voron, Vzbot, I3 Series 3D Printers..
💓After-Sales Service: Notes:The Spring Steel Sheet With A Magnetic Sticker Heatbed Solution Works Well With Eddy Series, Such As The Hot Bed Solution Of Pei Steel Plate+Soft Magnet.But It Is Essential To Avoid Interference From Standalone Magnets, Such As Used In Round Magnet Hotbed (Prusa),Regardless Of The Various Problems You Encounter During The Installation And Use Of Eddy, Please Contact Us In Time,Will Provide You With Detailed Solutions..
✅Error-Proof Installation: Bigtreetech Eddy Auto Bed Leveling Sensor With Custom Shell Effectively Shields External Metal Interference While Reserving Space For The Coil. It Is Easy To Install And Does Not Require Measurement, Which Improves The User Experience And Ensures Detection Accuracy..
✅Easier Installation: Btt Eddy High Speed Auto Leveling Sensor Comes With A 2.5M Usb Cable, Offering Plug-And-Play Convenience, Compatilbe With Btt Pi+ Octopus Pro/Octopus V1.1/Octopus Max Ez/Kraken/Skr Mini E3 V3.0/Skr V1.4 Turbo/Skr 3/Ez, Skr Pico Or Cb1/Cb2+ Manta M8p/M5p/M4p, Manta E3 Ez Running Klipper Control Board..
✅Temperature Compensation: Affected By Temperature Drift, Eddy V1.0 Auto Bed Leveling With The Temperature Compensation Function And Z-Axis Homing, Unaffected By Temperature Fluctuations. Integrates With Klipper's Temperature Compensation Feature To Boost Leveling Precision And Avoid Temperature Drift..
✅20 Sec High Speed Leveling: Btt Eddy V1.0 High Speed Leveling Sensor Adopts Rp2040 Main Control Chip, For 250*250Mm Hotbed Only 20 Sec, Weight Only 6G, Super Light&Small, Reduce The Impact Of Exercise, Precision Of 0.0005Mm, For Large Sizes Printer Friendly, Easily Achieve High-Precision Leveling..
Features
- Designed for Klipper: BIGTREETECH Eddy V1.0 high speed auto bed leveling sensor is designed for Klipper. adopts inductive leveling technology. uses a high-frequency magnetic field to induce eddy currents in a conductor, and completes precise leveling by measuring the intensity of the eddy currents.
- 20 sec High Speed Leveling: BTT Eddy V1.0 high speed leveling sensor adopts RP2040 main control chip, for 250*250MM hotbed only 20 sec, weight only 6g, Super light&Small, reduce the impact of exercise, precision of 0.0005mm, for large sizes printer friendly, easily achieve high-precision leveling.
- Perfect for Voron StealthBurner: BIGTREETECH Eddy current bed levelling sensor can be effortlessly attached to the Voron 2.4&Trident PL-08N/TL-Q5MC2 location for quick and convenient integration, suitable for Ender, CoreXY, Voron, Vzbot, I3 series 3D printers.
- Temperature Compensation: Affected by temperature drift, Eddy V1.0 auto bed leveling with the temperature compensation function and Z-Axis homing, unaffected by temperature fluctuations. Integrates with Klipper's temperature compensation feature to boost leveling precision and avoid temperature drift.
- Error-Proof Installation: BIGTREETECH Eddy auto bed leveling sensor with custom shell effectively shields external metal interference while reserving space for the coil. It is easy to install and does not require measurement, which improves the user experience and ensures detection accuracy.
- Easier installation: BTT Eddy high speed auto leveling sensor comes with a 2.5M USB cable, offering plug-and-play convenience, compatilbe with btt pi+ Octopus Pro/Octopus V1.1/Octopus Max EZ/Kraken/SKR Mini E3 V3.0/SKR V1.4 Turbo/SKR 3/EZ, SKR Pico or CB1/CB2+ Manta M8P/M5P/M4P, Manta E3 EZ running Klipper control board.
- After-sales Service: Notes:The spring steel sheet with a magnetic sticker heatbed solution works well with Eddy series, such as the hot bed solution of PEI steel plate+soft magnet.but it is essential to avoid interference from standalone magnets, such as used in round magnet hotbed (Prusa),regardless of the various problems you encounter during the installation and use of Eddy, please contact us in time,will provide you with detailed solutions.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #8
BIGTREETECH Direct TMC2209 V1.3 Stepper Motor Driver 2.8A UART Silent Drivers Stepsticks VS TMC2130 for Octopus V1.1/Octopus Pro,SKR V1.4 Turbo Manta M4P/M5P/M8P SKR 3 3D Printer Motherboard (4Pcs)
Asin: B07ZPYKL46 | Model: 2019 | PartNumber: 2019 | Ean: 0787794452221 | UPC: 787794452221
✅【Dynamic Current Control】The Coolstep Technology Allows The Tmc2209 Stepper Driver To Control The Current Dynamically, Reducing The Heat Generation Of The Stepper, Which In Turn Diminishes The Need For Cooling..
✅【Satisfying Customer Services】If You Have Any Problems Regarding Our Btt Tmc 2209 Stepper Driverstepsticks, Please Feel Free To Contact Us Via Amazon Message, Or Search Bigtreetech At Github..
✅【Supports Uart, Step/Dir Modes】Tmc2209 Stepper Motor Driver Support Uart, Step/ Dir Mode, Except That You Need To Modify The Firmware For The Mode You Use..
✅【Sensorless Homing】The Btt Tmc2209 V1.3 Stepper Motor Driver Incorporated Stallguard Technology To Detect Alterations In The Motor Current And Use This Measurement To Detect The End Of An Axis' Stroke And Produce 3D Printers Without Limit Switches..
Features
- Silent Stepper Motor driver The Bigtreetech TMC2209 v1.3 stepper motor driver is an ultra-silent motor driver IC for two-phase stepper motors.Voltage output capacity ranges from 5V to 28 V. It can operate bipolar stepper motors from 1 to 1/256 step modes. TMC2209 uses StealthChop2 technology for silent motor operation.
- Sensorless Homing The BTT TMC2209 v1.3 stepper motor driver incorporated StallGuard technology to detect alterations in the motor current and use this measurement to detect the end of an axis' stroke and produce 3D printers without limit switches.
- Dynamic Current Control The CoolStep technology allows the TMC2209 stepper driver to control the current dynamically, reducing the heat generation of the stepper, which in turn diminishes the need for cooling.
- Supports UART, STEP/DIR Modes TMC2209 stepper motor driver support UART, STEP/ DIR Mode, except that you need to modify the firmware for the mode you use.
- Satisfying Customer Services If you have any problems regarding our btt tmc 2209 stepper driverstepsticks, please feel free to contact us via Amazon message, or search BIGTREETECH at GitHub.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #9
BIGTREETECH TMC2209 V1.3 Stepper Motor Driver UART,Step/DIR Mode Ultra Silent Stepsticks with Heatsink for SKR V1.4 Turbo/SKR 3,Octopus/Manta M4P/M5P/M8P MKS Gen L 3D Printer Motherboard 5Pcs
Asin: B07ZQ3C1XW | Model: 2019 | PartNumber: 2019 | Ean: 0787794452238 | UPC: 787794452238
✅【Sensorless Homing】The Btt Tmc2209 V1.3 Stepper Motor Driver Incorporated Stallguard Technology To Detect Alterations In The Motor Current And Use This Measurement To Detect The End Of An Axis' Stroke And Produce 3D Printers Without Limit Switches..
✅【Wide Compatible】 Tmc2209 Stepper Driver It Can Be Widely Used In Various Fdm 3D Printers Board,Such As Btt Skr V1.4 Turbo,Skr 3/Octopus V1.1/Octopus Pro/Manta M4p/M5p/M8p,Manta E3 Ez,Skr Pro V1.2 ,Mks Gen L Series Motherboard ..
【 ❤️After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Github,If You Have Any Problems During Use,We Offer All Our Customers 1 Year Warranty Of Tmc2209. Please Feel Free To Contact Us For Help..
✅ 【 More Cost-Effective 】 The Tmc 2209 Stepper Driver Is Compatible With All Fdm 3D Printer On The Market, Eliminating The Expensive Cost Of Redesign. It Can Perfectly Replace The Original Non Silent Tmc2100 A4988 Drv8825 Lv8729 Stepper Driver As The Most Cost-Effective Choice.
✅【Supports Uart, Step/Dir Modes】Btt Tmc2209 Stepper Motor Driver Support Uart, Step/ Dir Mode, Except That You Need To Modify The Firmware For The Mode You Use. For Detailed Tutorials, Please Refer To The Bigtreetech Github Instructions..
Features
- Ultra-silent Stepper Motor driver BIGTREETECH TMC2209 V1.3 stepper motor driver adopts StealthChop2 silent motor operation technology is an ultra-silent motor driver IC for two-phase stepper motors. Continuous current up to 2.0A (peak 2.8A),voltage ranges from 5.5V to the maximun output of 28V.It can operate bipolar stepper motors from 1 to 1/256 step modes.
- Supports UART, STEP/DIR Modes BTT TMC2209 stepper motor driver support UART, STEP/ DIR Mode, except that you need to modify the firmware for the mode you use. for detailed tutorials, please refer to the BIGTREETECH GITHUB instructions.
- Sensorless Homing The BTT TMC2209 v1.3 stepper motor driver incorporated StallGuard technology to detect alterations in the motor current and use this measurement to detect the end of an axis' stroke and produce 3D printers without limit switches.
- More cost-effective The TMC 2209 stepper driver is compatible with all FDM 3D printer on the market, eliminating the expensive cost of redesign. It can perfectly replace the original non silent TMC2100 A4988 DRV8825 LV8729 stepper driver as the most cost-effective choice
- Wide Compatible TMC2209 Stepper driver it can be widely used in various FDM 3D printers board,such as BTT SKR V1.4 Turbo,SKR 3/Octopus v1.1/Octopus pro/Manta M4P/M5P/M8P,Manta E3 EZ,SKR Pro v1.2 ,MKS Gen L series motherboard .
- After-sales Service The manual and installation instructions have been uploaded to Github,If you have any problems during use,We offer all our customers 1 year warranty of tmc2209. Please feel free to contact us for help.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH DIRECT
Weight: 0.00 pounds
See On Amazon #10
BIQU Resin Build Plate+Magnetic Sheet,202X128mm Resin Flexible Steel Plate Flex Bed for Anycubic Mono X,Anycubic Photon X,Smart kumitsu KL9 3D Printer(8x5inch),Sliver
Asin: B08QCR4K86 | Model: WZC000385 | PartNumber: WZC000385 | Ean: 0779303890815 | UPC: 779303890815
🌷【Strong Adhesion】The Resin Steel Plate Surface Is Treated With Special Wire Drawing, And The Adsorption Force Is Stronger, So That The Model Can Be Better Adsorbed;.
🌷【24 Months Longer Warranty】Strict Testing For All Components Before Delivery.We Will Provide A Long-Term Warranty Service Of Up To 24 Months(The Normal Warranty Period Is 12 Months). We Will Respond Promptly Within 12 Hours In One Business Day. Any Problem Please Feel Free To Write To Us..
🌷【High Durability】The Resin Steel Plate Adopts Spring Steel Imported From Usa, Which Has Good Flatness And Durability; The Soft Magnetic Stickers Have Strong Magnetic Force..
🌷【Easy To Use】The Traditional Dlp Light Curing Printer Platform Must Be Removed With Tools Such As A Scraper, While This Resin Flexible Plate Can Be Removed By Bending.It's Easier To Remove The Print Model From The Resin Build Surface..
Features
- Applicable 3d printer model The size of resin spring steel plate is 202X128mm. Suitable for any resin 3D printer with a printing platform size of 202X128mm, such as: Anycubic-mono X, Anycubic-photon X, Smart kumitsu KL9 resin 3D Printer
- Easy to use The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface.
- Strong Adhesion The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed;
- High durability The resin steel plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force.
- 24 Months Longer Warranty Strict testing for all components before delivery.We will provide a long-term warranty service of up to 24 months(The normal warranty period is 12 months). We will respond promptly within 12 hours in one business day. Any problem please feel free to write to us.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #11
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 Inches | Weight: 0.11 pounds
See On Amazon #12
BIGTREETECH Direct Octopus V1.1 Control Board 32Bit Silent Motherboard Support 8 Axis TMC2209 Stepper Motor Driver Compatible btt pi v1.2/PI 2 to Running Klipper/Marlin for Voron 2.4 CoreXY 3D Printer
Asin: B094Y77FQN | Model: ZZB000540 | PartNumber: ZZB000540 | Ean: 0779605800352 | UPC: 779605800352
🐙【6 Pwm Fans Plus 2 】:The Octopus V1.1 Mainboard Offers Up To 6 Controllable Pwm Fans And Additional 2 Without Control With The Possibility Of Voltage Selection From 5V, 12V Or 24V. The Btt Octopus Also Has 8 Sockets For Drivers, Making It An Ideal Electronics For Demanding Machines..
🐙【Online/ Offline Printing】:Supports “Print From Sd Card” And “Print Via Usb Otg” Using The Integrated Usb-A Port. Usb-C Interface Supports An Emulated Serial Port That Allows Printing Via Usb. If You Need Any Help Regarding Btt Octopus V1.1 Control Board, Please Feel Free To Contact Us Via Amazon Message. We Have Professional Tech Supports Online To Take Care Of Your Problems..
🐙【Multifunctional Interface】:Octopus V1.1 Control Board Support Bltouch,Microprobe Auto Bed Leveling Senso, Sfs V2.0 Smart Filament Runout, Power Loss Detection, Automatic Power Down, Display Support Tft35 E3 V3.0.1 Tft35 V3.0/Tft50/70, When Running Klipper Touch Mode, Choose Hdmi5 V1.1Or Tft35 Spi Touchscreen..
🐙【Supports Klipper/Marlin】:Bigtreetech Octopus V1.1 Control Board For Voron 2.4 Compatible With Btt Pi V1.2/Pi 2 Supports Running Klipper And Marlin, Supports Firmware Update By Usb (Recommended) And Dfu Mode(Advanced Users). Updating Via Dfu Mode Is To Send Firmware To The Board Directly From Pc With No Need For Bootloader, Which Is Not Recommended For Novice Users..
🐙【Can Bus】:Btt Octopus V1.1 Motherboard Supports Can Bus Connectivity Using An Ethernet Connector. This Can Bus Connection Allows To Expand Control Board With Other Expansion Boards Very Easily..
Features
- Main Control Chip :BIGTREETECH Octopus V1.1 control board adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash ROM. Notice: Input voltage only supports 24V, 12V is not allowed.
- CAN BUS :btt octopus v1.1 motherboard supports CAN Bus connectivity using an ethernet connector. This CAN Bus connection allows to expand control board with other expansion boards very easily.
- 6 PWM Fans Plus 2 :The Octopus v1.1 Mainboard offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V. The BTT Octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.
- Supports Klipper/Marlin :bigtreetech octopus v1.1 control board for voron 2.4 compatible with btt pi v1.2/Pi 2 supports running Klipper and Marlin, Supports firmware update by USB (recommended) and DFU mode(advanced users). Updating via DFU mode is to send firmware to the board directly from PC with no need for bootloader, which is not recommended for novice users.
- Online/ Offline printing :Supports print from SD card and print via USB OTG using the integrated USB-A port. USB-C interface supports an emulated serial port that allows printing via USB. If you need any help regarding BTT Octopus V1.1 control board, please feel free to contact us via Amazon message. We have professional tech supports online to take care of your problems.
- Multifunctional interface :Octopus V1.1 control board support BLTOUCH,Microprobe auto bed leveling senso, SFS V2.0 Smart Filament runout, power loss detection, automatic power down, display support TFT35 E3 V3.0.1 TFT35 V3.0/TFT50/70, When running Klipper touch mode, choose HDMI5 V1.1or TFT35 SPI Touchscreen.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #13
BIGTREETECH TMC2209 V1.3 UART Stepper Motor Driver 2.8A Peak Stepstick Silent Driver for Manta M8P, Octopus V1.1, Octopus Pro, SKR 3, SKR V1.4 Turbo, SKR Pro V1.2 3D Printer Control Board (4 PCS)
Asin: B08C2DJQ6B | Ean: 0778601687820 | UPC: 778601687820
Prevent Motor Shake;.
Support Step / Dir And Uart Mode..
Support Stall Detection;.
A Large Area Of Thermal Pad, Reduce The Temperature Of The Driving Work;.
Features
- The motor is not easy to lose step; ultra-quiet mode;
- A large area of thermal pad, reduce the temperature of the driving work;
- Prevent motor shake;
- Support stall detection;
- Support STEP / DIR and UART mode.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #14
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH DIRECT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH DIRECT SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #15
BIGTREETECH 2 Types BLTouch Extension Cables + Mount Compatible with Ender 3, Ender-3 Pro, Ender3 V2, CR-10, Ender 5 Proand and Normal Controller Board
Asin: B08G8B23L7 | Model: VVV001876 | PartNumber: VVV001876 | Ean: 0779605889906 | UPC: 779605889906
🎅[Premium Quality]: Made Of High Quality Metal Material, It Is Durable, Wear Resistant And High Strength..
🎅[Warm Notice ]: The Bltouch Extension Cable Can Not Fit For Cr10 3D Printer, Because The Terminal And Position Of Cable Are Different. You Can Change The Terminal And Rearrange The Position Of Cables By Flathead Screwdriver, Tweezers Or A Cutter..
🎅[Packing Includes]: 1 X Bracket, 1X Bl Touch Cable(1M), 2 X M3x8mm Screw, 2 X M3x6mm Screw..
🎅[Wide Application]:Suitable For Ender 3 V2 Ender-3 Ender 3 Pro /Cr-10/Ender-5..
Features
- [Easy to Install]: Simple operation and very easy to install.
- [Wide Application]:Suitable for Ender 3 v2 Ender-3 Ender 3 pro /CR-10/Ender-5.
- [Premium Quality]: Made of high quality metal material, it is durable, wear resistant and high strength.
- [Packing Includes]: 1 x Bracket, 1x BL Touch Cable(1m), 2 x M3x8mm Screw, 2 x M3x6mm Screw.
- [Warm Notice ]: The bltouch extension cable can not fit for CR10 3D Printer, because the terminal and position of cable are different. You can change the terminal and rearrange the position of cables by flathead screwdriver, tweezers or a cutter.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
Weight: 0.06 ounces
See On Amazon #16
BIGTREETECH HDMI5 V1.1 Touchscreen Monitor 5 inch IPS LCD Display 800 480 for Raspberry-Pi 4B/3B,BTT PI V1.2/PI2 Compatible with SKR Mini E3 V3.0/Octopus/Manta M4P/M5P SKR 3 to Running Klipper
Asin: B0CMZYBPDF | Model: USA6-1040000039 | PartNumber: USA6-1040000039
✅Btt 5 Inch Monitor Hdmi Built-In Audio Decoding Circuit, Support 3.5Mm Headphone Jack Audio Output And Brightness And Display Direction Adjustment..
【 ❤️After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Github,If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
✅ Widely Compatible B: Bigtreetech Hdmi5 Display Working With Cb1,Compatible With Manta M4p/M5p/M8p,Matan Ez E3 Board,Can Running Klipper Touch Screen Mode..
✅4Pin Xh2.54 Breakout Port. The 4-Pins Xh2.54 Breakout Port Allows Custom Connection Via Usb Protocol, As Well As Screen Independent Power (Dc 5V), Giving Users More Diy Options..
✅ Widely Compatible A:Btt Hdmi5 Ips Lcd Display Compatible With Btt Pi V1.2/Pi2 Or Cb1/Cb2+Pi4b,Can Working With Skr Mini E3 V3.0/Skr Pico/Skr V1.4 Turbo/Skr 3/Octopus Series/Kraken Skr Pro V1.2 3D Printer Board,Running Klipper Touch Screen Mode. For Voron,Corexy,Vzbot,I3 3D Printer.
✅Btt Hdmi5 V1.1 Adopts 5 Inch Ips Capacitive Touch Screen With A Resolution Of 800X480,160°Viewing Angle,Support Up To 5-Point Touch..
Features
- BIGTREETECH HDMI5 Touchscreen desinged for users of 3d printers using the Klipper system.HDMI input,suitablec for Raspberry Pi4, PI4B+CB1/CB2, BTT PI V1.2/BTT PI2,Banana Pi,Windows 10 8 7 ,and other mini PC.
- BTT HDMI5 V1.1 adopts 5 inch IPS capacitive touch screen with a resolution of 800x480,160 Viewing Angle,support up to 5-point touch.
- BTT 5 inch monitor hdmi built-in audio decoding circuit, support 3.5mm headphone jack audio output and brightness and display direction adjustment.
- Widely Compatible A:BTT HDMI5 IPS LCD display compatible with BTT PI V1.2/PI2 or CB1/CB2+PI4B,can working with SKR MINI E3 V3.0/SKR Pico/SKR V1.4 Turbo/SKR 3/Octopus series/Kraken SKR Pro v1.2 3d printer board,running Klipper touch screen mode. for Voron,CoreXY,VZbot,I3 3D Printer
- Widely Compatible B: bigtreetech HDMI5 Display working with CB1,compatible with Manta M4P/M5P/M8P,Matan EZ E3 Board,can running Klipper touch screen mode.
- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.
- After-sales Service The manual and installation instructions have been uploaded to Github,If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.76 x 2.99 inches
See On Amazon #17
BIQU SSS Ultra-Flexible Removable Spring Steel Build Plate Surface Heated Bed for Ender 3/Ender3 Pro/Ender3 V2/Ender3 S1/Ender3 S1 Pro/Ender3 V2 Neo/Ender3 Neo/Ender 5 Pro/K1 3D Printer 235x235MM
Asin: B088841XH9 | Model: KINGPRINT-WZC000350 | PartNumber: KINGPRINT-WZC000350 | Ean: 0778416923380 | UPC: 778416923380
【Strong Adhesion】After The Hot Bed Is Heated, The Model Is Stable On The Hot Bed,And Not Easy To Loose And Fall Off..
【Good Compatibility】Can Print A Variety Of Consumables, Such As Pla, Petg, Tpu, Abs, Etc..
【Easy To Use And Flexible】Has Certain Flexibility And Can Be Bent. After Cooling, The Model Is Loose And Easy To Take..
【Recommended Hot Bed Temperature When Using Petg】Petg: 60 ℃ Celsius To 80 ℃ Celsius (The Larger The Printed Model, The Higher The Hot Bed Temperature).
Features
- Recommended hot bed temperature when using PLA PLA: 45 Celsius to 55 Celsius (the larger the printing model, the higher the temperature of the hot bed)
- Recommended hot bed temperature when using PETG PETG: 60 Celsius to 80 Celsius (the larger the printed model, the higher the hot bed temperature)
- Strong Adhesion After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.
- Easy to Use and Flexible Has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Good compatibility Can print a variety of consumables, such as PLA, PETG, TPU, ABS, etc.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.12 x 9.25 x 9.25 Inches
See On Amazon #18
BIGTREETECH SFS V2.0 Smart Filament Sensor,Filament Runout Sensor Support Klipper/Marlin/RRF 1.75mm SKR MINI E3/Octopus for Ender 3 FDM 3D Printer
Asin: B0C77J36T3 | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
✅【Upgrade Of Bi-Directional Feeding】Btt Smart Filament Sensor V2.0 Unlimited By The Installation Direction Of Filament, Eliminates Concerns Over Orientation, Enabling Quick, Easy Installation And Flexible Positioning To Maximze Space..
✅【Easy Install And User】Bigtreetech Btt Sfs V2.0 Smart Filament Sensor Designed With 3 Mounting Holes On The Back, For Easy To Installation Mounting To Printer Using Bracket, Support For Direct-Drive Extruders And Bowden Extruders.(For Specific Wiring And Firmware Changes, Please Refer To Bigtreetech Github For Instructions)..
❤️【100% Satisfying Customer Services】 Regarding Ender 3/ Ender 3 V2/ Ender 3 V1/Voron 2.4 The Bracket, Please Go To Github To Download Stl,You Can Print And Install It Yourself According To Your Printer Model ,If Have Any Problems, Please Contact Us At The First Time, We Will Give You A Satisfactory Solution..
✅【Wide Compatible】Bigtreetech Smart Silament Runout Sensor V2.0 Support Klipper/Marlin/Rrf Firmware, Different Firmware, Different Screen Reminder Interfaces, Supports Any Motherboard With Available I/O Ports, (Endstop Filament Detection,Bltouch,Induction Sensor). Such As Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Skr V1.4 Turbo/Skr 3/Ez,Skr Pico/Manta M4p/M5p/M8p, Manta E3 Ez, Kraken Board. (Notes: Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port)..
✅【Real Time Status Light Indication】Btt Sfs V2.0 Smart Filament Sensor Upon Detecting Nozzle Clogging,Filament Runout, Filament Tying, And Extruder Malfunctions, Filament Runs Out Or Is Broken, Sfs V2.0 Will Provide Corresponding Lights For Different Issues And Issue Error Alarms On The Screen In A Timely Manner And Automatically Pauses Printing, Save Resources..
Features
- High Precise BIGTREETECH SFS V2.0 smart filament sensor adopts high precise photoelectric induction technology, More accurate detection, detection length 2.88mm, and upgrade add filament feedling lever, for easy flexible filament loading.
- Real Time Status Light indication btt sfs v2.0 smart filament sensor upon detecting nozzle clogging,filament runout, filament tying, and extruder malfunctions, Filament Runs out or is broken, SFS V2.0 will provide corresponding lights for different issues and issue error alarms on the screen in a timely manner and automatically pauses printing, save resources.
- Upgrade of Bi-Directional Feeding BTT smart filament sensor V2.0 unlimited by the installation direction of filament, eliminates concerns over orientation, enabling quick, easy installation and flexible positioning to maximze space.
- Wide Compatible BIGTREETECH smart silament runout sensor v2.0 support Klipper/Marlin/RRF firmware, different firmware, different screen reminder interfaces, supports any motherboard with available I/O ports, (Endstop filament detection,BLtouch,induction sensor). such as SKR MINI E3 V3.0/Octopus V1.1/Octopus Pro/SKR V1.4 turbo/SKR 3/EZ,SKR Pico/Manta M4P/M5P/M8P, Manta E3 EZ, Kraken board. (Notes: please consult our technical support before using the motherboard without filament runout port).
- Easy install and user bigtreetech btt sfs v2.0 smart filament sensor designed with 3 mounting holes on the back, for easy to installation mounting to printer using bracket, support for direct-drive extruders and Bowden extruders.(For specific wiring and firmware changes, please refer to BIGTREETECH Github for instructions).
- 100% Satisfying Customer Services Regarding Ender 3/ Ender 3 V2/ Ender 3 v1/voron 2.4 the bracket, please go to Github to download STL,you can print and install it yourself according to your printer model ,If have any problems, please contact us at the first time, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.07 x 2.09 x 1.19 inches
See On Amazon #19
BIGTREETEHCH TFT35 E3 V3.0.1 Touch Screen Display with Two Working Modes Compatible 12864 LCD Display WiFi for Ender 3 CR-10 SKR MINI E3 V3.0/SKR V1.4 Turbo Octopus V1.1 SKR 3 3D Printer Control Board
Asin: B081DTNVPF | Model: tft35 e3 v3.0.1 | PartNumber: tft35 e3 v3.0.1 | Ean: 0787794452504 | UPC: 787794452504
💝【Multi Function Expansion Interface 】Bigtreetech Tft35 E3 V3.0.1 Is A 3D Printer Upgrade That Offers Both Sd Card And Usb Functionality, Reserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing，Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
💝【100% Satisfying After-Sales Services】If You Have Any Questions Regarding Bigtreetech Tft35-E3 V3.0.1 Touch Screeen, Please Contact Us On Amazon. Our Technical Supports Team Will Get Back To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed..
💝【Wide Compatiblity】Not Only Is This Btt Tft35 E3 V3.0.1 Smart Display Compatible With Ender Series Printers,But Can Also Be Used On A Host Of Other 3D Printers Too, As Long As You Are Willing To Print Your Own Enclosure For Other Display Panel Styles,Compatible With Skr Mini E3 V3.0/Octopus/Skr V1.4 Turbo/Skr 3/Skr 3 Ez/Skr Pro V1.2..Etc Motherboard.
💝【Dual Modes】Btt Tft35-E3 V3.0 Display Touch Screen Two Working Modes, Support Uart Serial Port Screen Mode And 12864 Screen Mode Support Two Printing Modes：Sd Card And U Disk With One Catering The Marlin-Style Interface, And The Other Offering A Full Colour Touch Interface With The Option To Switch Between Them Within Seconds While The Machine Is Running..
Features
- Main Control Chip BIGTREETECH TFT35 E3 V3.0.1 touch screen adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer.
- Dual Modes btt tft35-e3 v3.0 display touch screen two working modes, support UART serial port screen mode and 12864 screen mode support two printing Modes SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.
- Multi function expansion interface BIGTREETECH TFT35 E3 V3.0.1 is a 3D Printer Upgrade that offers both SD Card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing WIFI function can be realized by external WIFI module through WIFI port.
- Wide Compatiblity Not only is this BTT TFT35 E3 V3.0.1 smart display compatible with Ender series printers,but can also be used on a host of other 3D Printers too, as long as you are willing to print your own enclosure for other display panel styles,compatible with SKR MINI E3 V3.0/Octopus/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/SKR Pro V1.2..etc motherboard
- 100% Satisfying After-sales Services If you have any questions regarding Bigtreetech TFT35-E3 V3.0.1 touch screeen, please contact us on Amazon. Our technical supports team will get back to you within 24 hours. 1-Year warranty is 100% guaranteed.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
Dimensions: 0.31 x 3.66 x 3.42 inches
See On Amazon #20
BIGTREETECH Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)
Asin: B0CHFJYM5N | Model: KINGPRINTER-1020000442 | PartNumber: KINGPRINTER-1020000442
⭐The Control Board And The Core Board Use Btb Connection Method, So That Other Core Board Solutions Other Than Cm4 Can Be Selected, Such As Bigtreetech Cb1. The Mainboard Reserves The Spi Expansion Interface For Using The Klipper Firmware To Connect An External Acceleration Sensor For Acceleration Compensation..
⭐The Mcu Firmware Can Be Upgraded Through Sd Card, Or Through Dfu Through Klipper's Make Flash Command; The Main Board Reserves The Proximity Switch Interface, Supports Npn And Pnp Type Selection, (24V, 12V, 5V) Voltage Optional, Shared With Vfan6 Voltage Selection..
⭐The Thermistor Can Select The Pull-Up Resistance Value Through The Jumper, Which Supports Pt1000 Without External Modules, Which Is Convenient For Diy Use; The Control Board Reserves A Three-Way Four-Wire Fan Interface, Which Can Be Used To Connect A Water Cooling Device..
⭐The Power Chip Of Manta M8p Integrated Main Control Board Adopts Tps5450-5A, Which Supports Dc12/24V Power Input; The Output Current Of This Chip Is Up To 5A, And The Peak Value Can Reach 6A, Which Perfectly Supports The Power Supply Of Raspberry Pi..
Features
- BIGTREETECH Manta M8P V2.0 Control Board uses 32-bit ARM Cortex-M7 series STM32H723ZET6 main control chip with a core frequency of 550MHz. High efficiency MOSFET for less heat generation;
- The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
- The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation.
- The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device.
- The MCU firmware can be upgraded through SD card, or through DFU through Klipper's make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #21
BIGTREETECH KNOMI V2.0 Touch Screen Display 1.28 inch UI Multi-Color LCD Perfect for Voron StealthBurner Support EBB SB2209/SB2240 CAN Klipper OTA firmware Upgrade 3D Printer Parts
Asin: B0CL69CTKL | Model: US6-1040000055 | PartNumber: US6-1040000055
✅ Multi Functional Upgrade: More Refined Knomi 2 State Emoticons, Support For Multi-Color Ui Adjustment, Select Model And Begin Printing,Extruding And Retracting Filament,Heated Bed/Nozzle Warming Up Management,Abl/Qgl/Homing,Klipper System Abnormalities,Pop-Up Reminders..
【 ❤️After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Github,If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
✅Bigtreetech Knomi V2.0 Touch Screen Display Onboard Lis2dw12 Accelerometer And Capable Of Real-Time Measurement Of Acceleration, Convenient Customer Diy With More Features..
✅Btt Knomi V2.0 Touch Screen Display Adopts Esp32-S3r8 Dual Core Processor With A Main Frequency Of Up To 240Mhz Xtensa 32-Bit Lx7 Main Control Chip,Gc9a01 Driver Chip,1.28Inch,180C°All View,240Rgb*240 Dots,Flash:16Mb,Psram:8Mb..
Features
- BIGTREETECH KNOMI V2.0 display designed for Voron StealthBurner kit,upgrade to 5-point touch screen and facilitate machine control operations for customers and quick real time status display of printer.running Klipper.
- BTT KNOMI V2.0 touch screen display adopts ESP32-S3R8 dual core processor with a main frequency of up to 240MHz Xtensa 32-bit LX7 main control chip,GC9A01 driver chip,1.28inch,180C All View,240RGB*240 DOTS,Flash:16MB,PSRAM:8MB.
- Multi functional Upgrade: More refined KNOMI 2 state emoticons, support for Multi-color UI adjustment, select Model and Begin Printing,Extruding and Retracting Filament,Heated bed/Nozzle Warming Up management,ABL/QGL/Homing,Klipper system abnormalities,pop-up reminders.
- BIGTREETECH KNOMI V2.0 touch screen display onboard LIS2DW12 accelerometer and capable of real-time measurement of acceleration, Convenient customer DIY with more features.
- After-sales Service The manual and installation instructions have been uploaded to Github,If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.36 x 1.55 x 0.03 inches
See On Amazon #22
BIGTREETECH TFT35 SPI V2.1 Graphic Smart Display Compatible BTT Manta M8P/M4P/M5P, Manta E3EZ Control Board + CB1 Support Running Klipper Firmware DIY Upgrade 3D Printer
Asin: B0BSCQNF28 | Model: KINGPRINTER-1040000035 | PartNumber: KINGPRINTER-1040000035
3. It Is Connected With The Main Board Through Fpc Cable, Which Is Simple And Convenient To Operate;.
5. Currently, It Only Supports Bigtreetech Cb1. If You Use Cb1 V2.2, You Only Need To Use With Tft35 Spi V2.1; If You Use Cb1 V2.1, You Need To Use With Tft35 Spi V2.1+Io2can V1.0. If You Have Any Questions, You Can Contact Us At Any Time, And We Will Answer Your Questions..
4. Designed With Xh2.54 Terminal, Which Can Communicate With The Board Through The Terminal..
2. Each Motor Drive Shall Select Power Supply, Motor Power Supply Or Main Power Supply (Heating Rod Power Supply) Separately;.
Features
- 1. LCD display adopts SPI, touch adopts I2C communication mode, and shares the main control chip with the motherboard, which greatly reduces the cost of touch screen;
- 2. Each motor drive shall select power supply, motor power supply or main power supply (heating rod power supply) separately;
- 3. It is connected with the main board through FPC cable, which is simple and convenient to operate;
- 4. Designed with XH2.54 terminal, which can communicate with the board through the terminal.
- 5. Currently, it only supports BIGTREETECH CB1. If you use CB1 V2.2, you only need to use with TFT35 SPI V2.1; If you use CB1 V2.1, you need to use with TFT35 SPI V2.1+IO2CAN V1.0. If you have any questions, you can contact us at any time, and we will answer your questions.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #23
BIGTREETECH DIRECT 1PCS TMC2209 V1.3 UART Stepper Motor Driver Module VS TMC2100 TMC2130 for Octopus V1.1/Octopus Pro/SKR V1.4 Turbo/SKR 3/Manta M4p/M5P/M8P 3D Printer Controller Board
Asin: B07ZPV4HFP | Model: TMC2209 V1.3 | PartNumber: TMC2209 V1.3 | Ean: 0787794452214 | UPC: 787794452214
【Dynamic Current Control】The Coolstep Technology Allows The Tmc2209 To Control The Current Dynamically, Allowing Higher Current Intensities And Better Thermal Performance, Which Saves Up To 75% Of Electrical Energy..
【Satisfying Customer Services】If You Have Any Problems Regarding Our Btt Tmc2209 V1.3 Drivers Stepsticks, Please Feel Free To Contact Us Via Amazon Message, Or Search Bigtreetech At Github..
【Supports Uart, Step/Dir Modes】Bigtreetech 4Pcs Tmc2209 V1.3 Uart Stepper Motors Support Uart, Step/ Dir Mode, Except That You Need To Modify The Firmware For The Mode You Use..
【Sensorless Homing】The Btt Tmc2209 Stepper Motor Driver Incorporated Stallguard Technology To Detect Alterations In The Motor Current And Use This Measurement To Detect The End Of An Axis' Stroke And Produce 3D Printers Without Limit Switches..
Features
- Silent Motor Movement Thanks to StealthChop2 technology, BIGTREETECH TMC2209 V1.3 stepper motor driver allows for silent motor operation. The TMC2209 drivers work with a continuous current up to 2.0A, peaks of 2.8A.
- Sensorless Homing The BTT TMC2209 stepper motor driver incorporated StallGuard technology to detect alterations in the motor current and use this measurement to detect the end of an axis' stroke and produce 3D printers without limit switches.
- Dynamic Current Control The CoolStep technology allows the TMC2209 to control the current dynamically, allowing higher current intensities and better thermal performance, which saves up to 75% of electrical energy.
- Supports UART, STEP/DIR Modes BIGTREETECH 4PCS TMC2209 V1.3 UART stepper motors support UART, STEP/ DIR Mode, except that you need to modify the firmware for the mode you use.
- Satisfying Customer Services If you have any problems regarding our BTT TMC2209 V1.3 Drivers stepsticks, please feel free to contact us via Amazon message, or search BIGTREETECH at GitHub.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #24
BIGTREETECH SFS V2.0 Smart Filament Runout Sensor Upgrade Bi-Directional Photoelectric Filament Break Sensor for 1.75mm Filament for SKR Mini E3 V3.0 Manta M8P Octopus Pro BTT Pi Control Board
Asin: B0C77QS4TS | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
【Wide Compatibility, Easy Installation】Supports Bowden And Direct-Drive Extruders, With 3 Mounting Holes For Easy Mounting To Printer Using Bracket. Support Motherboards With Available Endstop Ports Or Dedicated Filament Runout Ports, Such As Bigtreetech Skr Mini E3 V3.0, Manta E3ez, Manta M8p, Octopus Pro, Etc. Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port..
【Instructions For Use】Insert Filament From The Direct Quick Connector In Any Direction Of Smart Filament Sensor; The Red Light Will Illuminate When There Is No Filament In The Module. The Blue Light Will Flash When The Extrusion Is Normal. The Blue Light Will Stay On Or Off When There Is No Extrusion..
【Photoelectric Sensor Technology】Sfs V2.0 Adopts Photoelectric Sensor Technology, With Theoretical Detection Length Of 2.88Mm, Which Is More Accurate Than The 7Mm Of Sfs V1.0. Please Note: 2.88 Mm Is The Minimum Detection Length Required For The Sensor To Function Properly. If You Encounter Problem Of False Triggers, Try Increasing The Detection Length By 1Mm Increments Until The Problem Is Resolved..
【Multifunctional Detection】Sfs V2.0 Detects Extrusion Errors Caused By Filament Runout, Nozzle Clogging, Filament Tying, And Extruder Trouble. It Has Two Signal Outputs And Indicator Lights To Distinguish Between Clogging Or Filament Runout. Small And Lightweight, It Will Not Add Too Much Pressure To The Printer's Extrusion Head..
Features
- Bi-directional Feeding BIGTREETECH SFS V2.0 is bi-directional, there is no restriction on filament direction, giving you guys more flexibility during installation. It suitable for Marlin, Klipper, and RRF firmware.
- Multifunctional Detection SFS V2.0 detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout. Small and lightweight, it will not add too much pressure to the printer's extrusion head.
- Wide Compatibility, Easy Installation Supports Bowden and Direct-Drive extruders, with 3 mounting holes for easy mounting to printer using bracket. Support motherboards with available endstop ports or dedicated filament runout ports, such as BIGTREETECH SKR Mini E3 V3.0, Manta E3EZ, Manta M8P, Octopus Pro, etc. Please consult our technical support before using the motherboard without filament runout port.
- Photoelectric Sensor Technology SFS V2.0 adopts photoelectric sensor technology, with theoretical detection length of 2.88mm, which is more accurate than the 7mm of SFS V1.0. Please Note: 2.88 mm is the minimum detection length required for the sensor to function properly. If you encounter problem of false triggers, try increasing the detection length by 1mm increments until the problem is resolved.
- Instructions for use Insert filament from the direct quick connector in any direction of smart filament sensor; The red light will illuminate when there is no filament in the module. The blue light will flash when the extrusion is normal. The blue light will stay on or off when there is no extrusion.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Warranty: 1年保修
See On Amazon #25
BIGTREETECH CB1 V2.2 Core Control Board 100M 1GB DDR3 RAM Motherboard Support HDMI Klipper/Debian for PI4B Adapter V1.0,Raspberry-pi 4 Manta E3 EZ,Manta M4P/Manta M5P/M8P 3D Printer Motherboard
Asin: B0BLBV9FNY | Model: US66-1020000405 | PartNumber: US66-1020000405
☃️. Btt Cb1 V2.2 Quad-Core Architecture Is 62Bit ,Arm Cortex-A53 @ 1.5Ghz Processor ,1Gb Ddr3 Ram.
☃️.Bigtreetech Cb1 V2.2 Core Board Can Run Linux / Support Debian / Progammable,High Speed And High Stability, And Is Convenient For Users To Diy.Compatible With Manta M4p/Manta M5p/Manta M8p/Manta E3 Ez 3D Printer Moterboard To Running Klipper Firmware.
☃️. Bigtreetech Cb1 Network Support 100M Ethernet +100M Wifi.
☃️. Display Adopts Malig32 Mp2 Gpu,Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output,Onboard Usb2.0 Port.Powerful High Performance Details And Clarity.(Such As Btt Hdmi5 V1.1).
Features
- .BIGTREETECH CB1 V2.2 Size is the same BTB header as the For Raspberry -Pi CM4 It can be directly installed with Pi4b adapter or Raspberry-Pi,Highly cost effective way to run your Klipper.
- . Display Adopts MaliG32 MP2 GPU,Support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output,onboard USB2.0 port.Powerful High Performance details and clarity.(such as BTT HDMI5 V1.1)
- . BTT CB1 V2.2 quad-core architecture is 62bit ,ARM Cortex-A53 @ 1.5GHz processor ,1GB DDR3 RAM
- . BIGTREETECH CB1 Network Support 100M Ethernet +100M WIFI
- .BIGTREETECH CB1 V2.2 Core board can run Linux / Support Debian / progammable,High Speed and high stability, and is convenient for users to DIY.compatible with Manta M4P/Manta M5P/Manta M8p/Manta E3 EZ 3D Printer moterboard to running Klipper firmware
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.65 x 2.48 x 3.30 inches
See On Amazon #26
BIGTREETECH Kraken Control Board Onboard 8 TMC2160 Drivers Up to 60V High-Performance Perfect Fit Voron Phoenix CoreXY 3D Printer DIY Support Klipper/Marlin/RRF For HDMI5/HDMI7, EBB SB2209 CAN, BTT Pi
Asin: B0CQX9XJ4W | Model: KINGPRINTER-1020000456 | PartNumber: KINGPRINTER-1020000456
Reserve 2 Canbus Ports (Jst Socket, Which Can Directly Connect To Btt Ebb Sb2209/Sb2240 Can Wiring); Reserve Two Four Wire Fan Interfaces, With Optional 24V/12V/5V Voltage, And Can Be Used To Connect To Water Cooling Devices;.
If You Plan To Diy Assemble A Voron24 Core Xy 3D Printer With Large-Sized Dual Idex High-Performance Properties, You Can Choose: Btt Kraken* 1Pc, Ebb Sb2209 Or Ebb36 Or Ebb42 Can* 2Pcs, Btt Pi* 1Pc, Hdmi5 Or Hdmi7* 1Pc; This Set Combination Will Satisfy You..
Reserve Proximity Switch Interface, Supporting Npn And Pnp Type Selection (24V/12V/5V) Voltage Options; Reserve Spi Extension Interface For Users Using Klipper Firmware To Connect External Acceleration Sensors For Acceleration Compensation..
Onboard 8 Tmc2160 Drivers In Spi Mode With Diag Function Pins; Simply Plug And Unplug Jumpers For Easy Use; Onboard Two Max31865 Modules, Supporting Dual Pt Thermocouples And Compatible With Two Or Four-Wire Pt100/Pt1000, Facilitating Diy Usage For Customers..
Features
- BIGTREETECH Kraken Control Board Utilizes 32-bit ARM Cortex-M7 series STM32H723ZGT6 MCU with a main frequency of 550MHz; High-performance MOSFETs to reduce heat generation.
- Onboard 8 TMC2160 drivers in SPI mode with DIAG function pins; simply plug and unplug jumpers for easy use; Onboard two MAX31865 modules, supporting dual PT thermocouples and compatible with two or four-wire PT100/PT1000, facilitating DIY usage for customers.
- Reserve 2 CANbus ports (JST socket, which can directly connect to BTT EBB SB2209/SB2240 CAN wiring); Reserve two four wire fan interfaces, with optional 24V/12V/5V voltage, and can be used to connect to water cooling devices;
- Reserve proximity switch interface, supporting NPN and PNP type selection (24V/12V/5V) voltage options; Reserve SPI extension interface for users using Klipper firmware to connect external acceleration sensors for acceleration compensation.
- If you plan to DIY assemble a Voron24 Core XY 3D printer with large-sized dual IDEX high-performance properties, you can choose: BTT Kraken* 1PC, EBB SB2209 or EBB36 or EBB42 CAN* 2PCS, BTT Pi* 1PC, HDMI5 or HDMI7* 1PC; This set combination will satisfy you.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #27
BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display DSI 800x480 for Raspberry Pi 4 3 2 Model B RPi 1 B B+ A A+ 3D Printer Controller (5in Capacitive Touch Screen)
Asin: B08FD2YZ23 | Model: ZZB000417 | PartNumber: ZZB000417 | Ean: 0779303890068 | UPC: 779303890068
❤ 【5-Point Touch】 It Supports Raspberry Pi Dsi Display Interface, Comes With A Capacitive Touch Panel, And Supports 5-Point Touch.Capacitive Touch Control ,Better Touch Response,Faster Response Time..
❤【12 Months Warranty】Thank You Very Much For Your Choice And Trust. If You Have Any Questions About The Product, Can You Contact Us First? Give Us The Opportunity To Understand Your Needs, And We Will Do Our Best To Answer Questions And Solve Problems For You..
❤ 【Easy To Install】The Unique Hole Design On The Back Allows You To Install The Raspberry Pi Directly.The Display Adopts Raspberry Pi Power Supply Design, Without External Power Supply..
❤【High Resolution】This 5 Inch Lcd Touch Screen With A Resolution Of 800*480 And A Display Area Of 108X64.8Mm..
Features
- Wide range of applications 5 inch capacitive Touch Screen designed for for pi 4 model B /pi 3 model A+ B+ B/pi 2 model B/pi 1 model B+ A+.
- High resolution This 5 inch LCD touch screen with a resolution of 800*480 and a display area of 108x64.8mm.
- 5-point touch It Supports Raspberry Pi DSI display interface, comes with a capacitive touch panel, and supports 5-point touch.Capacitive Touch Control ,better touch response,faster response time.
- Easy to install The unique hole design on the back allows you to install the Raspberry Pi directly.The display adopts Raspberry Pi power supply design, without external power supply.
- 12 MONTHS WARRANTY Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #28
BIGTREETECH Direct ESP8266EX ESP01S Serial Wireless Module WiFi Sensor (ESP01 Updated) WiFi Module DIY for SKR PRO V1.1 SKR Mini E3 TFT24 TFT35 V3.0 Screen
Asin: B081DRXXN2 | Ean: 0787794452481 | UPC: 787794452481
Data Interface: Uart / Hspi / I2c / I2s / Ir Remote Contorl / Gpio / Pwm.
Working Current: Average 80Ma.
Operating Voltage: 3.0 ~ 3.6V (Suggest 3.3V).
Frequency Range: 2.4Ghz~2.5Ghz(2400M ~ 2483.5M).
Features
- Wireless standard: 802.11 b / g / n
- Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
- Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
- Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
- Working current: average 80mA
- See more on Amazon...
Brand: BIGTREETECH DIRECT | Manufacturer: BIGTREETECH DIRECT
Weight: 0.00 pounds
See On Amazon