Peachtree Woodworking Supply 1" x 20 Foot for Boxed Abrasive Roll Pack, Wood Turners, Furniture Repair, Woodworkers, Metal Workers and Automotive Body Work (150 Grit)
Asin: B07L364VXM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.They Also Work On Most Any Type Of Material And Can Be Cut To Any Length Needed..
Each Roll Is Made From Hard To Find J-Weight Cloth Backed Sandpaper. Available In: 150X, 240X, 320X, 400X, & 600X..
Stepping Your Abrasives From Low Grit To High Grit Is An Essential Process For Finishing Your Pens, Pencils, Bottle Stoppers Or Any Wood Project In The Proper Manner..
Or You Can Reach For The Correct Grit Inside The Box Dispenser And Tear Off Just The Right Amount For Your Project. Each Grit Roll Is 1" Wide And Is Flexible Enough To Be Used On Most Any Shape. These Abrasive Strips Work Exceptionally Well On Rounded Objects Such As Turned Pens, Bottle Stoppers Or Any Other Smaller Type Of Turning..
Features
- Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
- Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1 wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
- They also work on most any type of material and can be cut to any length needed.
- Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner.
- Each roll is made from hard to find J-weight cloth backed sandpaper. Available in: 150x, 240x, 320x, 400x, & 600x.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.10 x 240.00 x 1.00 Inches
See On Amazon Similar To Peachtree Woodworking Supply 1 x
#1
KEYSTONE 25 Pack of Sanding Mouse Mini Abrasive Sheets 80 grit
Asin: B0C3J5Q94X | Model: 6535 | PartNumber: 6535 | Ean: 0817918023423 | UPC: 817918023423
Each Sheet Is Slightly Larger Than The Actual Sanding Mouse Mini Pad To Help Get Into Tight, Small, 90 Degree Corners Like Bead Work On Kitchen Cabinets. Using These Strips Along With A Sanding Mouse Mini You’Ll Be Able To Work Those Tight Hard To Reach Spots With Ease.
Each Pack Of Sanding Mouse Mini Sheets Come With A Total Of 25 Sheets Of One Grit. The Available Grits Are 80, 120, 150, 220 And 400 Grits..
The Strips Are A Little Over 3-1/2” Long And A Little Over 1” Wide And Can Also Be Used Without The Sanding Mouse Mini To Get Into Extra Tight Spots. They Can Also Be Used On Other Sanding Devices That Accept Hook And Loop Sandpaper And Fall Into The Same Size Parameter..
These Abrasive Sheets Are Made For Use With The Sanding Mouse Mini (Sold Separately) And Have A Hook And Loop Backing For Quick And Easy Swap Outs. When Its Time To Move On To The Next Grit, Simple Peel Off The Sheet And Replace With A New Sheet In Seconds!.
Features
- Start sanding with the 80 grit sandpaper sheet and work your way up to the extra fine 400 grit sheet for great looking workpiece! Wether you re sanding wood, composites or even metal, this high quality, durable sandpaper will help you create a wonderful looking project.
- These abrasive sheets are made for use with the Sanding Mouse Mini (sold separately) and have a hook and loop backing for quick and easy swap outs. When its time to move on to the next grit, simple peel off the sheet and replace with a new sheet in seconds!
- Each sheet is slightly larger than the actual Sanding Mouse Mini pad to help get into tight, small, 90 degree corners like bead work on kitchen cabinets. Using these strips along with a Sanding Mouse Mini you ll be able to work those tight hard to reach spots with ease
- The strips are a little over 3-1/2 long and a little over 1 wide and can also be used without the Sanding Mouse Mini to get into extra tight spots. They can also be used on other sanding devices that accept hook and loop sandpaper and fall into the same size parameter.
- Each pack of Sanding Mouse Mini sheets come with a total of 25 sheets of one grit. The available grits are 80, 120, 150, 220 and 400 grits.
- See more on Amazon...
Brand: KEYSTONE | Manufacturer: Peachtree Woodworking Supply
See On Amazon #2
Peachtree Woodworking Supply 10 Foot Long Dust Collection Power Tool Hose Kit with 5 Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums
Asin: B0C7CWB3S6 | Model: 11212 | PartNumber: 11212 | Ean: 0817918023911 | UPC: 817918023911
The Large Thread-On Rubber Fitting Has A 1-1/2 Inch I.D. With A 1-13/16 Inch O.D. Which Works On Many Other Power Tools. The Rigid Plastic Vacuum Plug-In Adaptor Has A 2-1/4 Inch Taper Up To 2-5/16 Inch O.D. The Adaptor Is Designed To Plug Into Most Standard Workshop Vacuum Ports. The Plug-In Adaptor Conveniently Threads Onto The Power Tool Hose So It Will Never Slip Off!.
Included Inside The Box: 1 Each Ten Foot Long 1-3/16 Inch O.D. Small Diameter Flexible Hose, 2 Each Small Flexible Rubber Thread-On Fitting, 2 Each Rubber Adaptors With Ribbed Ends And 1 Each Plug-In Adaptor For Shop Vacuums That Will Allow You To Connect The Hose To Most Commercial Or Residential Workshop Vacuum Ports. Important! Check Your Power Tool Port Dimensions Before Placing An Order..
A Tapered Rubber Adaptor With A Ribbed End Is Included And Had A ¾” I.D. The Outer Diameter Tapers From 1-9/32” Down To 1-1/4”. The Ribbed End Ensures A Snug Fit. The Other Rubber Adapter With A Ribbed End Has A 1-1/4” I.D. And A 1-5/8” O.D. Both Fittings Are Threaded On The Opposite For A Perfect Fit On To The Included Hose.
The Small Rubber Fitting Threads On To The End Of The Hose And Is Ideal For Connecting Random Orbital Sanders, Palm Sanders, Biscuit Joiners Or Any Other Power Tool With Smaller Dust Collection Ports. The Small Thread-On Rubber Fitting Has A 1 Inch I.D. With A 1-3/16 Inch Taper Up To 1-1/4 Inch O.D. This Kit Will Also Work With Popular Tools Like The K4 And The K5 Pocket Hole Jig. Using This Hose With Your Tools Will Keep Your Shop Cleaner And Can Be Quickly Coiled Up For Easy Storage.
Features
- The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
- The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage
- The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!
- A tapered rubber adaptor with a ribbed end is included and had a I.D. The outer diameter tapers from 1-9/32 down to 1-1/4 . The ribbed end ensures a snug fit. The other rubber adapter with a ribbed end has a 1-1/4 I.D. and a 1-5/8 O.D. Both fittings are threaded on the opposite for a perfect fit on to the included hose
- Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each rubber adaptors with ribbed ends and 1 each Plug-in Adaptor for shop vacuums that will allow you to connect the hose to most commercial or residential workshop vacuum ports. IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS before placing an order.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 1.25 x 120.00 x 1.25 inches | Weight: 1.50 Pounds
See On Amazon #3
Peachtree Woodworking Supply 4 inch to 2-1/2 inch Reducer with 4 inch Flexible Cuff Rubber Coupler Fitting and Stainless Steel Hose Clamps with Turn Key Thumb Screw to Tighten & Loosen
Asin: B0C598B129 | Ean: 0817918023942 | UPC: 817918023942
Two Stainless Steel Hose Clamps Help Provide A Tight Seal On The 4 Inch End And Keep The Reducer From Falling Out. These Clamps Fit Neatly Into The Slots Around The Coupler So There Is No Slipping When Tightened. No More Busting Your Knuckles. Each Clamp Is Equipped With A Blue Turn Key Mechanism To Make Tightening And Loosening The Clamp Super Easy..
Made From High Quality Abs Plastic For Extended Periods Of Use, The Reducer Fitting Will Withstand The Constant Friction And Debris Flow Of Woodworking Dust Collectors. The Reducer Measures: Nominal 4” End Is 3-61/64” Od And 3-41/64” Id; 2-1/2” Nominal Od End Measures 2-15/32” Od And 2-9/32” Id. Dimensions May Slightly Vary Due To Slight Variations In The Manufacturing Process..
The Rigid Rubber Coupler Seals Tightly Around The Reducer For Excellent Airflow. Easy To Install And Easy To Remove. As With Most All Other Dust Collection Fittings, It’S Always A Good Idea To Have Extra On Hand For When You Need It. It’S Always Better To Have It And Not Need It Than It Is To Need It And Not Have It..
Most Wet/Dry Vacuum Hoses Will Plug Directly Into The Smaller End Of This Fitting Making It A Super Value For Most Professional And Us Weekend Warrior Type Woodworkers. There Are Some Vacuum Units That Use Different Size Hoses And Hose Adaptors So Please Be Sure To Measure Your Hose And Machine Ports Before Making A Purchasing Decision..
Features
- Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4 port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y s, T s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.
- Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most professional and us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
- Two stainless steel hose clamps help provide a tight seal on the 4 inch end and keep the reducer from falling out. These clamps fit neatly into the slots around the coupler so there is no slipping when tightened. No more busting your knuckles. Each clamp is equipped with a blue turn key mechanism to make tightening and loosening the clamp super easy.
- The rigid rubber coupler seals tightly around the reducer for excellent airflow. Easy to install and easy to remove. As with most all other dust collection fittings, it s always a good idea to have extra on hand for when you need it. It s always better to have it and not need it than it is to need it and not have it.
- Made from high quality ABS plastic for extended periods of use, the reducer fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. Dimensions may slightly vary due to slight variations in the manufacturing process.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 pounds
See On Amazon #4
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
Asin: B01L0FZOQ8 | Model: 368 | PartNumber: 368 | Ean: 0810948014027 | UPC: 810948014027
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 6.00 x 14.00 x 14.00 inches | Weight: 5.00 Pounds
See On Amazon #5
Micro-Mesh 2 inch by 2 inch Double Sided Soft Touch Sanding Pads Ideal for Pen and Bottle Stopper Polishing. Perfect for Cycle Sanding Acrylic Materials with CA Glue Finish
Asin: B000H6EC4C | Model: STP-01 | PartNumber: STP-01 | Ean: 5915903721486, 4049933039516, 0810948010517 | UPC: 810948010517
The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 2.00 x 2.00 x 2.00 inches | Weight: 0.02 Pounds
See On Amazon #6
Peachtree Woodworking Supply Cleaning Eraser Stick Small 1-1/2" x 1-1/2" x 7-7/8" Made from Natural Rubber for Removing Dust and Build up from Abrasive Belts Sanding Discs Drum Sanders Grip Tape
Asin: B000H69U7G | Model: 187 | PartNumber: 187 | Ean: 0810948010838 | UPC: 810948010838
It Works Almost Like An Old Fashioned Pencil Eraser. As You Rub Or Slide The Stick Across An Abrasive Surface The Stick Quickly Loosens And Removes Foreign Materials. Your Abrasives Will Be Brought Back To Life To Continue Sanding. If You Have Power Sanders Like Belt Sanders You Can Simply Hold The Stick Up Against The Sanding Belt While The Power Is On And Watch The Belt Be Cleaned Right Before Your Eyes!.
The Natural Rubber Cleaning Eraser Stick Also Works Exceptionally Well On Skateboard Grip Surfaces Which Tend To Get Dirty Rather Quickly. Once Clean, The Skateboard Surface Is Almost As Good As New And Keeps Its Grip A Whole Lot Longer. Similar To Skateboard Grip Surfaces, Abrasive Or Grip Tape That’S Used On Floor Areas That Can Get Slippery Can Be Easily Cleaned Using The Eraser Stick..
Clean Various Items Around The House, Workshop Or In The Garage. The Rubber Construction Of The Stick Works Best On Belt Sanders To Allow Your Belts To Cut Faster And Last Longer All The While It Can Also Be Used On Disc Sanders, Drum Sanders, Rubber Bottom Shoes (Not Plastic), Skateboard Grip Tape, Grip Tape And A Whole Lot More!.
The Natural Rubber Cleaning Eraser Stick Removes Most All Of The Residue. Use Stick After Your Sander Has Been Clogged With Wood Dust And/Or Wood Resin To Return The Sanding Surface To A Like-New Condition; Pulls Dust, Wood Particles, Sap, Metal Shavings, Paint, And Other Residue Out Of Sanders And Other Abrasive Materials..
Features
- Sanding most anything is a chore that we all don t typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear!
- The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition; Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials.
- It works almost like an old fashioned pencil eraser. As you rub or slide the stick across an abrasive surface the stick quickly loosens and removes foreign materials. Your abrasives will be brought back to life to continue sanding. If you have power sanders like belt sanders you can simply hold the stick up against the sanding belt while the power is on and watch the belt be cleaned right before your eyes!
- Clean various items around the house, workshop or in the garage. The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer all the while it can also be used on disc sanders, drum sanders, rubber bottom shoes (not plastic), skateboard grip tape, grip tape and a whole lot more!
- The natural rubber cleaning eraser stick also works exceptionally well on skateboard grip surfaces which tend to get dirty rather quickly. Once clean, the skateboard surface is almost as good as new and keeps its grip a whole lot longer. Similar to skateboard grip surfaces, abrasive or grip tape that s used on floor areas that can get slippery can be easily cleaned using the eraser stick.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 0.57 Pounds
See On Amazon #7
2-1/2 inch Diameter by 10 foot Long PVC Dust/Debris Collection Hose MADE IN THE USA with 2 each 2.5 inch Turnkey Stainless Steel Hose Clamps
Asin: B09BNVHJ21 | Model: 6173 | PartNumber: 6173 | Ean: 0817918023119 | UPC: 817918023119
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
304 Stainless Steel Hose Clamp- The 2 ½” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
No More Tools! – Set Your Tools Aside When Installing Your Ductwork Or Hose With These Handy, Easy To Tighten Hose/Duct Clamps. Place The Clamp Where Its Needed Then Simply Turn The Key To Loosen Or Tighten Them..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.10 x 120.00 x 2.50 Inches
See On Amazon #8
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #9
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B01M3Y1WTT | Model: 6168 | PartNumber: 6168 | Ean: 0817918020460 | UPC: 817918020460
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 4.00 x 120.00 x 4.00 inches
See On Amazon #10
6" x 10' (6 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07WWXYYXW | Model: 0311-0600-0100 | PartNumber: 0311-0600-0100 | Ean: 0817918022358 | UPC: 817918022358
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 6.00 Inches
See On Amazon #11
Peachtree Woodworking Supply Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4" x 3/8" Miter Slots Also Works with Many Router Tables and Band Saws
Asin: B0048J720U | Model: 3096 | PartNumber: 3096 | Ean: 0814310011034 | UPC: 814310011034
Making Your Thin Rip Cuts In This Fashion Allows You To Cut Wider Boards Down Without Getting Your Fingers In Harms Way By Keep Them Away From The Blade Or Cutter.The Thin Rip Works Much Like A Feather Except That It Doesn’T Exert Spring Like Pressure Against The Board. This Means It Can Be Used To Make Accurate, Repetitive Cuts Since It’S Essentially Just Holding Its Spot Once It Is Secured..
The Jig Can Be Used On Other Workshop Machinery Like Router Tables With Fences And Band Saws For Re-Saw Applications. In Certain Cases, When Working With Larger Or Longer Stock On Table Saws Or Router Tables, We Recommend Using Two Thin Rip Jigs Behind The Blade Or Cutter For Extra Stability When Feeding Your Stock Through..
The Thin Rip Jig Has A Roller Guide Bearing On The Tip To Make Feeding Your Stock Through An Easy And Smooth Moving Process. The Free Rotating Bearing Is Made From High Quality Materials For Extended Workshop Use. The Jig Fits Directly Into Most Any Standard 3/8” X 3/4” Miter Slot. The Body Is Made From A Solid Piece Of Aluminum And Is Adjustable Inward And Outward From Your Fence Depending On The Width Of Your Stock..
The Thin Rip Jig Acts Kind Of Like A Third Hand Behind The Blade Or Cutter. With The Saw Unplugged Simply Measure From The Outside Of Of The Blade Toward The Tip Of The (Guide Roller) Thin Rip Jig For The Width Cut You Want To Make. Once Set, Secure The Thin Rip Jig Simply By Rotating The Large, Easy To Grip Star Shaped Knob. After Your First Cut, Reset Your Stock Behind The Blade And Slide The Fence Over So Your Stock Piece Is Touching The Guide Roller On The Thin Rip Jig. Lock The Fence..
Features
- Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
- The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
- Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it s essentially just holding its spot once it is secured.
- The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8 x 3/4 miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
- The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 3.00 x 4.00 x 3.00 Inches | Weight: 1.25 Pounds
See On Amazon #12
Micro-Mesh Pen Sanding Kit
Asin: B0037MEIT2 | Ean: 0725123001139 | UPC: 725123001139
The Results Are Truly Wonderful And Will Most Definitely Please The Most Discriminate Of Eyes. The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Works Great On Stabilized Woods, Acrylics & Solid Surface Materials. Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process. 9 Micro-Mesh Pads Included..
Ideal For Use With Plastics, Resin Or Impregnated Blanks When Turning. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! When Using The Pads It Is Recommended That Start At The Lower Grit Of 1500 And Step Or Cycle Your Way Up To The High Grit Of 12000..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000.
- The results are truly wonderful and will most definitely please the most discriminate of eyes. The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with plastics, resin or impregnated blanks when turning. The pads can also be used around the home for fine repair work.
- Works great on stabilized woods, acrylics & solid surface materials. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. 9 Micro-Mesh Pads included.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod
Dimensions: 1.25 x 4.40 x 3.40 Inches | Weight: 0.02 pounds
See On Amazon #13
Fulton Woodworking Tools 4" x 50' Ultra Flex Clear Vue Heavy Duty PVC Dust Collection Hose
Asin: B0013EI04A | Model: 377 | PartNumber: 377 | Ean: 0810948014065, 0798167706759 | UPC: 810948014065, 798167706759
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 10.00 x 24.00 x 20.00 inches
See On Amazon #14
Peachtree Woodworking Supply Clear Plastic Dust Collector Replacement Bag 5 Pack 20" Diameter by 43" Long For Machines with 20" Filter Drums 5 mil Thick
Asin: B07DX8678P | Model: 11501 | PartNumber: 11501 | Ean: 0817918021313 | UPC: 817918021313
Not Only That, Thinner Bags Tend To “Dry Out” A Lot Quicker Than Thicker Bags. Our Plastic Dust Collector Bags Are A Thicker Plastic Material That Hold Up And Won’T Tear Like Thinner, Standard Household Bags. Designed To Be Used On The Bottom Of Single Stage Dust Collector Units, These Plastic Dust Collection Bags Are Ideal For Capturing Larger Dust Particles And Debris That Is Created When Working With Dust Collectors..
Each Of These Plastic Bags Measures Approximately 43” Long By 31" Wide (20" In Diameter). Please Check The Diameter Of Your Dust Collector Drum Before Deciding If These Bags Will Work For You. The 5 Mil Thick Bags Are Designed For Use With Dust Collectors That Are Use For Collecting Wood Dust And Debris..
Another Key Reason These Bags Work So Well For Dust Collection Is Because They Are Clear. This Means You Can See When The Bag Is Full Or Getting Close To Full. When You See The Transparent Bag Has Been Filled Up, Simply Remove It From The Dust Collector And Throw It Away. Replace The Bag With A New Plastic Dust Collection Bag And You’Re Ready To Go..
A Question We Get Asked A Lot Is, Why Not Just Use A Store Bought Trash Or Heavy Duty Bags For My Dust Collector? The Simple Answer Is That Standard Bags You Find At A Big Box Store Are Generally Very Thin And Flimsy In Comparison And Not Made For Dry Dust. This Makes Them Vulnerable To Tearing And Ripping Which Makes For A Complete Mess For Us To Clean Up..
Features
- Replace your factory cloth dust collection bags with these convenient and disposable heavy duty plastic bags. Typically when using dust collectors we want to keep the dust inside the bottom bags where it belongs. The problem is, with cloth bags, they tend to kick up a lot of dust and essentially create a dust storm when we need to remove them to clean them out. Plastic bags solve this issue.
- A question we get asked a lot is, why not just use a store bought trash or heavy duty bags for my dust collector? The simple answer is that standard bags you find at a big box store are generally very thin and flimsy in comparison and not made for dry dust. This makes them vulnerable to tearing and ripping which makes for a complete mess for us to clean up.
- Not only that, thinner bags tend to dry out a lot quicker than thicker bags. Our plastic dust collector bags are a thicker plastic material that hold up and won t tear like thinner, standard household bags. Designed to be used on the bottom of single stage dust collector units, these plastic dust collection bags are ideal for capturing larger dust particles and debris that is created when working with dust collectors.
- Another key reason these bags work so well for dust collection is because they are clear. This means you can see when the bag is full or getting close to full. When you see the transparent bag has been filled up, simply remove it from the dust collector and throw it away. Replace the bag with a new plastic dust collection bag and you re ready to go.
- Each of these plastic bags measures approximately 43 long by 31 wide (20 in diameter). Please check the diameter of your dust collector drum before deciding if these bags will work for you. The 5 mil thick bags are designed for use with dust collectors that are use for collecting wood dust and debris.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 1.73 x 15.71 x 13.23 inches | Weight: 2.29 pounds
See On Amazon #15
Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery
Asin: B08HR6MDWT | Model: 441 | PartNumber: 441 | Ean: 0817918022839 | UPC: 817918022839
This Cone Shaped Reducer Can Be Also Be Used On Machinery With A Little Help From Some Other Accessories. Typically The Reducer Works With Hose Since It Is Basically The Same Size As Your 4 Inch And 2 1/2 Inch Machinery Or Shop Wet/Dry Vac Ports. With A 4 Inch Diameter Rubber Coupler (Sold Separately) Or A Short Section Of 4 Inch Hose You Can Connect The Reducer Directly To A 4 Inch Port On Machines Like Band Saws, Table Saws, Large Planers And More..
Made From High Quality Abs Plastic For Extended Periods Of Use, This Fitting Will Withstand The Constant Friction And Debris Flow Of Woodworking Dust Collectors. The Reducer Measures: Nominal 4 Inch End Is 3-61/64” Od And 3-41/64” Id; 2-1/2” Nominal Od End Measures 2-15/32” Od And 2-9/32” Id. All Of The Dimensions May Slightly Vary Due To Slight Variations In The Manufacturing Process..
Most Wet/Dry Vacuum Hoses Will Plug Directly Into The Smaller End Of This Fitting Making It A Super Value For Most Of Us Weekend Warrior Type Woodworkers. There Are Some Vacuum Units That Use Different Size Hoses And Hose Adaptors So Please Be Sure To Measure Your Hose And Machine Ports Before Making A Purchasing Decision..
One Of The Reasons That This Fitting Is Used So Often Within The Woodworking Industry, Is That Many Of Us Don’T Want Or Need A Large Dust Collection System In Our Garage Or Workshop. With This Fitting, You’Ll Be Able To Reduce Your Hose Size Down To The 2 1/2 Inch Size Which The Most Commonly Used Size For Most Big Box Store Wet/Dry Vacuums And Shop Vacuums..
Features
- The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!
- One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don t want or need a large dust collection system in our garage or workshop. With this fitting, you ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.
- This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more.
- Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
- Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #16
Peachtree Woodworking Supply Boxed Multi-Roll Assorted Abrasive Rolls for Wood Turners, Wood, Metal Workers, Automotive Body Work in Assorted Grits, Includes 150, 240, 320, 400 and 600 Grit Rolls
Asin: B0045WIZHO | Model: 7036 | PartNumber: 7036 | Ean: 0814310011959 | UPC: 814310011959
They Also Work On Most Any Type Of Material And Can Be Cut To Any Length Needed..
Each Roll Is Made From Hard To Find J-Weight Cloth Backed Sandpaper. Available In 150X, 240X, 320X, 400X, & 600X. The Center Opening Of Each Roll Is Approximately 1-1/2"..
Stepping Your Abrasives From Low Grit To High Grit Is An Essential Process For Finishing Your Pens, Pencils, Bottle Stoppers Or Any Wood Project In The Proper Manner..
Or You Can Reach For The Correct Grit Inside The Box Dispenser And Tear Off Just The Right Amount For Your Project. Each Grit Roll Is 1" Wide And Is Flexible Enough To Be Used On Most Any Shape. These Abrasive Strips Work Exceptionally Well On Rounded Objects Such As Turned Pens, Bottle Stoppers Or Any Other Smaller Type Of Turning..
Features
- Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
- Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1 wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
- They also work on most any type of material and can be cut to any length needed.
- Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner.
- Each roll is made from hard to find J-weight cloth backed sandpaper. Available in 150x, 240x, 320x, 400x, & 600x. The center opening of each roll is approximately 1-1/2.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree
Dimensions: 0.01 x 11.00 x 9.00 inches
See On Amazon #17
Sili The Complete Silicone Glue Kit - Wood Glue Up 4-Piece Kit 2 Pack of Silicone Brushes, 1 Tray, 1 Comb Woodworking, Arts, Crafts and White School Glue Spreader Applicator Set, Model: 4020
Asin: B0748B9MZJ | Model: 4020 | PartNumber: 4020 | Ean: 0814310017005 | UPC: 814310017005
What If You Need To Apply Glue To Larger Areas? We’Ve Thought Of That And Included The Super Handy Sili Comb/Squeegee! The Comb Side Is Approx. 3½ Inches Wide Making It Perfect For Larger Surfaces Areas Like When You Need To Laminate Two Pieces Of Wood Together. The Comb Leaves Perfect Glue Grooves For Better Coverage And Adhesion. The Squeegee Side Is About 2 Inches Wide And It Leaves A Smooth Flat Glue Surface Which Is Great For Many Arts And Crafts..
Each Of The Items In This Super Convenient Set Are Made From Silicone Rubber Which Makes Them Very Easy To Clean. Clean The Brushes, Comb/Squeegee Or Even The Tray Using Warm Water. You Can Also Let Your Wood Glue Or White School Glue Dry Over Night And The Glue Will Peel Right Off Revealing A Fresh Glue Brush, Comb/Squeegee Or Tray! Pack Includes 1Ea. 1 Inch Brush, 1Ea. ½ Inch Brush, 1 Ea. Comb/Squeegee And 1 Ea. Tray..
The Sili Glue Tray Is The Perfect Holder/Dispenser For You Glue While Your Working. Simply Pour Or Squeeze More Glue Than You’Ll Need Into The Tray And Dip The Sili Comb/Squeegee Or One Of The Brushes Into The Glue. When Your Done Applying Glue To Your Project, You Can Pour The Remaining Glue Back Into Your Glue Bottles Using The Funnel End Tip On The Glue Tray..
The Two Sili Glue Brushes Have Two Different Size Brush Heads. One Head Is ½” And The Other Is 1” Wide. The Smaller Brush Head Of The ½” Brush Makes It Ideal For Applying Glue To Narrow Strips And Makes It Easier To Work Small Pieces. The Larger 1” Brush Is Perfect For Applying Wood Glue To Thicker Stock Pieces. Each Brush Tip Is Made From Silicone And Is Easy To Clean With Warm Water..
Features
- The Complete Sili Glue Kit includes 2 different size Sili brushes, the Sili Glue Tray and the versatile Sili Glue Comb/Squeegee. All 4 of these items together provide you with all the glue up tools you need to get you going on your next projects. Ideal for woodworkers, arts and crafts, hobbyists and more!
- The two Sili Glue Brushes have two different size brush heads. One head is and the other is 1 wide. The smaller brush head of the brush makes it ideal for applying glue to narrow strips and makes it easier to work small pieces. The larger 1 brush is perfect for applying wood glue to thicker stock pieces. Each brush tip is made from silicone and is easy to clean with warm water.
- What if you need to apply glue to larger areas? We ve thought of that and included the super handy Sili Comb/Squeegee! The comb side is approx. 3 inches wide making it perfect for larger surfaces areas like when you need to laminate two pieces of wood together. The comb leaves perfect glue grooves for better coverage and adhesion. The squeegee side is about 2 inches wide and it leaves a smooth flat glue surface which is great for many arts and crafts.
- The Sili Glue Tray is the perfect holder/dispenser for you glue while your working. Simply pour or squeeze more glue than you ll need into the tray and dip the Sili Comb/Squeegee or one of the brushes into the glue. When your done applying glue to your project, you can pour the remaining glue back into your glue bottles using the funnel end tip on the glue tray.
- Each of the items in this super convenient set are made from silicone rubber which makes them very easy to clean. Clean the brushes, comb/squeegee or even the tray using warm water. You can also let your wood glue or white school glue dry over night and the glue will peel right off revealing a fresh glue brush, comb/squeegee or tray! Pack includes 1ea. 1 inch brush, 1ea. inch brush, 1 ea. Comb/squeegee and 1 ea. Tray.
- See more on Amazon...
Brand: Sili | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 10.00 x 6.30 x 0.10 inches
See On Amazon #18
Peachtree Woodworking Supply Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges Includes Setup Blocks and Quad Jig for 8 inch Grinders
Asin: B01HDEJGLE | Model: 7575 | PartNumber: 7575 | Ean: 0814310018552 | UPC: 814310018552
The Pro Grind Tool Rest Bar Attachment Offers You The Best Possible Way To Achieve A Precise Edge To Your Bevels Without Taking Of Too Much Material Off Of Your Tool. After All, We Need Our Tools To Last A Long Time, So Why Would You Want To Take Off To Much At A Time? The Tool Rest Bar Is Ideal For Sharpening Curved, Even Bevel Edges That Are Typically Used On Spindle And Roughing Gouges..
The Pro Grind Sharpening System Also Comes With A Number Of Setup Jigs And Accessories To Help In The Setup Process To Sharpen Your Tools To The Proper And Repeatable Angles. From The Built-In Projection Gauge On The Multi-Grind Arm To The Magnetic Micro Bevel Setup Block You’Ll Be Able To Achieve Consistent Repeatable Angles And Produce Excellent Results Each And Every Time You Use The Pro Grind Sharpening Jig System..
The Large, 3” X 5” Slotted Platform Is The Ideal Way To Sharpen Flat Edged Tools Like Wood Turning Skews, Chisels And Hand Plane Irons. The Platform Has A Slot Milled Horizontally Through It So It Can Accept The Included Tool Holder. The Tool Holder Is Designed To Keep Your Tools At The Correct Angle While Being Able To Slide Side To Side During The Sharpening Process..
The Included And Versatile Multi-Grind Jig Will Correctly Shape The Edge On Bowl Gouges, Side Grinds (Aka Ellsworth Grind, Liam O’Neil Grind/Irish Grind) Or Fingernail Grinds For Spindle Work And Detailing. Not Only Will It Correctly Shape Your Tools, You Will Also Be Able To Repeat The Process To Produce Consistent Results Every Time. The Multi-Grind Jig Is Designed To Be Used With The Included Multi-Grind Arm On The Pro Grind Sharpening System And Will Accept Tools Up To 1.125” In Diameter..
Features
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply
Dimensions: 30.00 x 9.00 x 4.00 Inches
See On Amazon #19
5" x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07VYNDXTV | Model: 6171 | PartNumber: 6171 | Ean: 0817918022310 | UPC: 817918022310
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 5.00 inches
See On Amazon #20
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Weight: 9.15 Pounds
See On Amazon
Looking For Something Else?
Search