HAPPYMODEL 2-4G ELRS EP1 EP2 EP1DUAL TCXO Receiver Tiny ExpressLRS RX for Racing Quadcopters Drone (EP1 Dual TCXO)
Asin: B0BQW919BS
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ep2 Tcxo Ism2-4G Receiver: Esp8285 Mcu; Sx1280(Sx1281)Imltrt Rf Module Smd Ceramic Antenna; Frequency Range: 2400 M To 2500 M; Receive Refresh Rate: 25~500; Working Voltage: 5V; Peak Gain: 3.7Db; Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version..
Ep1 Ep2 Elrs Receiver Is The Hottest Tiny Expresslrs Receiver, Suitable For Racing Quadcopters Drone..
Ep1 Dual Tcxo Ism2-4G Receiver: Esp32 Pico D4, Dual Sx1280(Sx1281); Antenna Connector: Ipex Mhf 1/U.Fl; Rf Frequency: 2-4G (2400~2480M); Telemetry Power: >19Dbm; Receiver Protocol: Crsf; Input Voltage: +5V Dc @ "+" Pad; Default Firmware Out Of Factory: Unified_Esp32_2400_Rx Could Upgrade To Happymodel Ep1 Dual 2400 Rx 3.0Fw..
Ep1 Tcxo Ism2-4G Receiver: Esp8285 Mcu; Sx1280(Sx1281)Imltrt Rf Module; Omni Directional Antenna; Frequency Range: 2400 M To 2500 M; Receive Refresh Rate: 25~500; Working Voltage: 5V; Peak Gain: 2.23Db; Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version..
Features
- EP1 EP2 ELRS receiver the new TCXO version EP series receiver apply "temperature compensated crystal oscillator", accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable.
- EP1 TCXO ISM2-4G Receiver: ESP8285 MCU; SX1280(SX1281)IMLTRT RF Module; Omni directional antenna; Frequency Range: 2400 M to 2500 M; Receive refresh rate: 25~500; Working voltage: 5v; Peak gain: 2.23dB; Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version.
- EP2 TCXO ISM2-4G Receiver: ESP8285 MCU; SX1280(SX1281)IMLTRT RF Module SMD Ceramic antenna; Frequency Range: 2400 M to 2500 M; Receive refresh rate: 25~500; Working voltage: 5v; Peak gain: 3.7dB; Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version.
- EP1 Dual TCXO ISM2-4G Receiver: ESP32 PICO D4, dual SX1280(SX1281); Antenna connector: IPEX MHF 1/U.FL; RF Frequency: 2-4G (2400~2480M); Telemetry power: >19dbm; Receiver protocol: CRSF; Input voltage: +5V DC @ + pad; Default Firmware out of factory: Unified_ESP32_2400_RX Could upgrade to HappyModel EP1 Dual 2400 RX 3.0FW.
- EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver, suitable for racing quadcopters drone.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon Similar To HAPPYMODEL 24G ELRS EP1 EP2
#1
HappyModel ELRS Module ES24TX Pro 1000mW 2.4G ExpressLRS Micro TX Module RGB LED Module for TX16S, QX7, TX12, X9D Transmitter Remote Control Drone Remote Accessories
Asin: B09MQHJSBB | Model: ES24TX Pro | PartNumber: ES24TX Pro | Ean: 0755454783022 | UPC: 755454783022
Note: This Micro Tx Module Support Most Of The Opentx Radio Transmitter Remote Controller That With Micro Jr Bay, Such As Tx16s, Tx12, Taranis X9d.
Please Make Sure The Applicability Before Purchasing, We Are Always Here To Assist..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- Note: This Micro TX module support most of the OpenTX radio transmitter remote controller that with Micro JR bay, such as TX16S, TX12, Taranis X9D
- Please make sure the Applicability before purchasing, we are always here to assist.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HappyModel
See On Amazon #2
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX)
Asin: B092J2QJ8S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165326 | UPC: 700512165326
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #3
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP2 RX)
Asin: B095JQXCZ3 | Model: ELRS | PartNumber: ELRS | Ean: 0700512167832 | UPC: 700512167832
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #4
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP1 RX)
Asin: B095JQ8F9J | Model: ELRS | PartNumber: ELRS | Ean: 0700512167825 | UPC: 700512167825
Peak-Gain Difference: Ep2 _Rx Is 3.7Db, While Ep1_Rx Is 2.23Db..
Elrs Receiver Comfortable With Racing, Long Range Dorne And Tinywhoop, As They Are Lightweight , Nano Size, And With Low-Latency And High-Refresh-Rate Rf Module..
Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6Mm, Sx1280imltrt Rf Module, Receive Refresh Rate: 25- 500, Type: Ism..
Mcu: Ep1 / Ep2_Rx With Esp8285 Mcu. Frequency Range: 2400 To 2500..
Features
- The Happymodel 2-4G ELRS nano series receiver is an open source program based on ExpressLRS, pre-loaded firmware are all beta versions.
- MCU: EP1 / EP2_RX with ESP8285 MCU. Frequency Range: 2400 to 2500.
- Peak-Gain Difference: EP2 _RX is 3.7dB, while EP1_RX is 2.23dB.
- Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6mm, SX1280IMLTRT RF Module, Receive Refresh Rate: 25- 500, Type: ISM.
- ELRS Receiver Comfortable with racing, long range dorne and tinywhoop, as they are lightweight , Nano size, and with Low-latency and high-refresh-rate RF module.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #5
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP1 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5Z9FZGZ | Ean: 0755621760252 | UPC: 755621760252
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #6
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP2RX)
Asin: B092J1VP6S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165333 | UPC: 700512165333
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
The Pp Rx Is Designed By @Jye Smith From Expresslrs Development Team. Its Main Hardware Architecture Is Stm32l432kbu6 Mcu And Sx1280 Rf Chip. It Has A Built-In Ceramic Antenna, Which Is Super Light And Small In Size..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #7
Happymodel ExpressLRS FPV Long Range Module ELRS ES900TX 915MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (ES900TX+ES900RX Combo Kit)
Asin: B0CKZ2F29V | Ean: 0755621759959 | UPC: 755621759959
The Elrs Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Happymodel Transmitter Module To Operate Stably Under High Power Conditions..
Features
- This ELRS module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the happymodel transmitter module to operate stably under high power conditions.
- The ELRS ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: HAPPYMODEL
Dimensions: 1.00 x 5.00 x 4.00 inches
See On Amazon #8
Happymodel 2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver Tiny ExpressLRS for Long Rang FPV Racing Drone (EP1DUAL TCXO)
Asin: B0BMFVZ6D9 | Model: EP1DUAL TCXO | PartNumber: EP1DUAL TCXO | Ean: 0755621857150 | UPC: 755621857150
Ep2 Tcxo Receiver :Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version.
Ep1 Dual Tcxo Receiver :Default Firmware Out Of Factory: Unified_Esp32_2400_Rx Could Upgrade To Happymodel Ep1 Dual 2400 Rx 3.0Fw.
Ep1 Tcxo Receiver :Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version.
Features
- EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply temperature compensated crystal oscillator , accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable.
- EP1 TCXO Receiver :Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version
- EP2 TCXO Receiver :Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version
- EP1 Dual TCXO Receiver :Default Firmware out of factory: Unified_ESP32_2400_RX Could upgrade to HappyModel EP1 Dual 2400 RX 3.0FW
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.00 x 6.00 x 5.00 inches
See On Amazon #9
HAPPYMODEL ES24TX Pro ELRS Micro TX Module 2.4G 1000mW with Cooling Fan RGB LED for FPV Drones
Asin: B09M71SSTS | Model: ZZ45639 | PartNumber: ZZ45639 | Ean: 0768432292140 | UPC: 768432292140
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V..
Customized Antenna: Happymodel 2.4Ghz Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version?This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000mw, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2.4GHz Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
Dimensions: 1.20 x 5.51 x 5.11 Inches
See On Amazon #10
HappyModel Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX+EP2RX)
Asin: B0B689YL5F | Ean: 0755621760191 | UPC: 755621760191
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Features
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #11
HAPPYMODEL 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output (ExpressLRS)
Asin: B0CB555NDT | Ean: 0647625053716 | UPC: 647625053716
Compact And Lightweight Design: The Mini Micro Epw6 Pwm Output Receiver Is Designed With A Compact And Lightweight Form Factor, Making It Suitable For Various Drone And Rc Model Configurations. Its Small Size Does Not Compromise Its Performance, Providing A Convenient Solution Without Adding Unnecessary Weight To Your Aircraft..
Package Contents: 2 X 2.4Ghz Antenna 1X 6Pin 2.54Mm.
Expresslrs Compatibility: This Receiver Module Is Fully Compatible With Expresslrs, An Open-Source Long-Range Radio System. By Utilizing The Power Of Expresslrs, You Gain Access To Features Such As Low Latency, Fast Data Transmission, And Extensive Configurability, Enhancing The Overall Control And Responsiveness Of Your Flying Experience..
Reliable And Extended Range: Experience A Reliable And Extended Control Range With The Happymodel Elrs Receiver. It Provides A Strong And Stable Signal Connection, Minimizing The Risk Of Signal Loss And Ensuring Consistent Control Over Your Drone Or Rc Model Even At Longer Distances..
Features
- Versatile Compatibility: The Happymodel 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output is compatible with a wide range of flight controllers and devices that support PWM signal input. This compatibility ensures seamless integration into your existing setup, allowing for easy and convenient installation.
- Reliable and Extended Range: Experience a reliable and extended control range with the Happymodel ELRS Receiver. It provides a strong and stable signal connection, minimizing the risk of signal loss and ensuring consistent control over your drone or RC model even at longer distances.
- Compact and Lightweight Design: The Mini Micro EPW6 PWM Output Receiver is designed with a compact and lightweight form factor, making it suitable for various drone and RC model configurations. Its small size does not compromise its performance, providing a convenient solution without adding unnecessary weight to your aircraft.
- ExpressLRS Compatibility: This receiver module is fully compatible with ExpressLRS, an open-source long-range radio system. By utilizing the power of ExpressLRS, you gain access to features such as low latency, fast data transmission, and extensive configurability, enhancing the overall control and responsiveness of your flying experience.
- Package Contents: 2 x 2.4GHz antenna 1x 6pin 2.54mm
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
Weight: 0.03 Pounds
See On Amazon #12
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP2 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5ZXDQZN | Ean: 0755621760221 | UPC: 755621760221
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #13
Happymodel ES900 Dual RX ELRS ExpressLRS Diversity Receiver Iong Range Receiver for Micro Carbon Fiber FPV Racing Quadcopter Quad Frame kit RC Drone Frame Tiny Whoop (915MHz)
Asin: B0CKYGX7Q7 | Ean: 0735980953519 | UPC: 735980953519
Built-In A Tcxo (Temperature Compensated Crystal Oscillator) , Improved Frequency Stability Over Temperature: The Most Significant Benefit Is The Improvement In Frequency Stability Over A Wide Range Of Temperatures. While Standard Crystal Oscillators Can Drift In Frequency As The Temperature Changes, A Tcxo Is Designed To Compensate For This Drift..
Package Includes: 1 X Happymodel Es900 Dual Rx Elrs Diversity 915Mhz Long Range Receiver, 2 X Antennas.
Ultra-Compact & Lightweight: Designed With A Pcb Size Of Just 21.5Mm X 16Mm And A Feather-Light Weight Of 1.5 Grams (Excluding Antenna)..
Low Latency And High Refresh Rate, They Are Very Suitable For Fpv Racing And Long Range Fpv Cruising While Being Ultra-Light And Ultra-Small, Making Them Very Suitable For Tinywhoop..
Features
- True Diversity System: Features a genuine dual RX ELRS system for unmatched signal integrity and reception reliability. Perfect addition to any quadcopter or drone. With its advanced 915MHz radio frequency technology, it provides superior signal quality and lower latency. Enjoy a reliable, crystal-clear connection with the ES900 dual receiver.
- Low latency and high refresh rate, they are very suitable for FPV racing and long range FPV cruising while being ultra-light and ultra-small, making them very suitable for Tinywhoop.
- Built-in a TCXO (temperature compensated crystal oscillator) , Improved Frequency Stability Over Temperature: The most significant benefit is the improvement in frequency stability over a wide range of temperatures. While standard crystal oscillators can drift in frequency as the temperature changes, a TCXO is designed to compensate for this drift.
- Ultra-Compact & Lightweight: Designed with a PCB size of just 21.5mm x 16mm and a feather-light weight of 1.5 grams (excluding antenna).
- Package includes: 1 x Happymodel ES900 DUAL RX ELRS Diversity 915MHz Long Range Receiver, 2 x antennas
- See more on Amazon...
Brand: Usmile | Manufacturer: Happymodel
Dimensions: 0.20 x 0.85 x 0.63 inches
See On Amazon #14
HAPPYMODEL 2.4G ExpressLRS ELR ES24TX Slim Pro TX Module Compatible with X-lite Tango2
Asin: B09FXXTHK6 | Model: Z44889 | PartNumber: Z44889
This Slim Pro Module Comes With An Aluminum Alloy Shell And Is Equipped With A Cooling Fan That Automatically Works When The Module Is Working At 250M-W. Antenna Gain: 1.87Dbi..
Can Updated By Expresslrs Configurator Or Update The Firmware Via Connecting The Wifi Hot Spot Of The ?Expresslrs Tx Module?, Visit "10.0.0.1" By Browser (Password:Expresslrs)..
Open Source Expresslrs; Long Range, Low Latency And High Re-Flashed Rates; Telemetry Data Transmission Supported..
Supports Up To 1000M-W Rf Power (T-Lite Radio And Tango2 Radio Need External Power Supply) , Very Useful For Long Range Fpv..
Features
- The ES24TX Slim Pro Module Pre-load the ExpressLRS firmware and it?s plug and play, compatible with Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
- Supports up to 1000m-W RF power (T-lite radio and Tango2 radio need external power supply) , very useful for Long Range FPV.
- This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250m-W. Antenna gain: 1.87dBi.
- Open source ExpressLRS; Long range, Low latency and High re-flashed Rates; Telemetry data transmission supported.
- Can updated by ExpressLRS configurator or update the firmware via connecting the Wifi hot spot of the ?ExpressLRS TX Module?, visit 10.0.0.1 by browser (password:expresslrs).
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #15
HAPPYMODEL ES24TX Pro 2-4G ExpressLRS ELRS Micro TX Module with Cooling Fan RGB LED Module for DIY RC Drone
Asin: B092ZPSG53 | Ean: 0030391997153 | UPC: 030391997153
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25 - 500, Power Supply Voltage: 5V~10V..
Customized Antenna: Happymodel 2-4G Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version: This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2-4G Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25 - 500, Power Supply Voltage: 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #16
Happymodel ExpressLRS EP1 RX 2.4GHz Omnidirectional U.FL Antenna - Linear
Asin: B0C69QVY5J | Ean: 0736952008725 | UPC: 736952008725
Features
- This Happymodel ExpressLRS (ELRS) Omnidirectional U.FL Antenna is for the EP1 RX 2.4GHz Nano series receiver. The EP1 RX has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size!Note: This is the antenna only. The EP1_RX is sold separately.FeaturesDesigned by Jye Smith on the ExpressLRS development team.Cerami
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.03 Pounds
See On Amazon #17
HAPPYMODEL ExpressLRS ES915RX Long Range Module Compatible with Radiomaster Jumper
Asin: B0C7H5MS6F | Model: Z43209 | PartNumber: Z43209
Operation Current: ~100Ma..
Telemetry Output Power: <17Dbm..
Rx To Fc Protocol: Crsf. Antenna Connector: Ipex4..
Vcc Input: 3.7~24V Recommend 5V~12V..
Features
- MCU:STM32F103RBH6.
- VCC input: 3.7~24v Recommend 5v~12v.
- Operation current: ~100Ma.
- Rx To FC protocol: CRSF. Antenna connector: IPEX4.
- Telemetry output Power: <17dBm.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #18
HAPPYMODEL ExpressLRS ELRS EPW6 TCXO Receiver 2-4G 6CH PWM for Fixed-Wing RC Drone Quadcopter Parts
Asin: B0BVR1N2W3 | Model: Z49482 | PartNumber: Z49482
Receiver Protocol: Pwm Or Crsf; Input Voltage: +5V~8.4V..
Pcb Size: 19Mm X 17.5Mm..
1.49G Lightweight Receiver; Firmware Update Via Wi-Fi..
Rf Frequency: 2-4G (2400~2480M); Telemetry Power: 12Dbm..
Features
- Antenna connector: IPEX MHF 1/U.FL 6x PWM outputs.
- RF Frequency: 2-4G (2400~2480M); Telemetry power: 12dbm.
- Receiver protocol: PWM or CRSF; Input voltage: +5V~8.4V.
- 1.49g lightweight receiver; Firmware update via Wi-Fi.
- PCB size: 19mm x 17.5mm.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #19
HAPPYMODEL EP2 RX /EP1 RX/ELRS 2.4GH RX Receiver SX1280 EXPRESSLRS Nano Long Range Receiver for TBS Tracer (EP1 RX 40mm Antenna)
Asin: B09YM7NJYM | Ean: 0086972526434 | UPC: 086972526434
Bind Procedure: 1. Supply Power To The Pp/Ep1/Ep2 Rx, Wait Until The Led On The Rx Is Off, Immediately Turn Off The Power, And Then Repeat Again The Above Steps. When The Rx Is Powered On For The Third Time, The Led Light Will Start To Double-Flash, Which Means That The Rx Enters The Binding Mode.
Pp Rx: Led Solid Means Bind Successful Or Connection Established; Led Double-Flash Means In Bind Mode; Led Flash Slowly Means No Signal Connection From The Tx Module Ep1/Ep2 Rx: Led Solid Means Bind Successful Or Connection Established; Led Double-Flash Means In Bind Mode; Led Flash Slowly Means No Signal Connection From The Tx Module; Led Flash Fast Means In Wifi Hotspot Mode, You Can Connect The Wifi Of The Rx And Upgrade Firmware Of The Rx Via Visit 10.0.0.1(Password:Expresslrs).
2. Insert The Es24tx Module Or Other Diy 2.4G Elrs Tx To Radio Transmitter, And Choose External Rf Mode To Crsf Protocol, Then You Can Find Elrs Menu From The Radio Systems(Need To Copy The Elrs.Lua File To The Sd-Card Tools First), Enter Into Elrs And Press [Bind], The Led On The Rx Module Will Getting To Be Solid If Bind Successfully. 3. Receiver Led Status Meanings:.
Notes: Since The Official Perfect Version Of Elrs Firmware Has Not Been Released Yet, Currently Our Pp_Rx, Ep1/Ep2 Rx And Es24tx Pre-Loaded Firmware Are All Beta Versions, You Can Upgrade The Official Firmware When Official Perfect Target Available..
Features
- Happymodel 2.4g ExpressLRS ELRS nano series receiver module
- Notes: Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available.
- Bind procedure: 1. Supply power to the PP/EP1/EP2 rx, wait until the LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the LED light will start to double-flash, which means that the RX enters the binding mode
- 2. Insert the ES24TX module or other DIY 2.4G ELRS TX to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems(Need to copy the ELRS.LUA file to the SD-Card tools first), Enter into ELRS and press [Bind], the LED on the RX module will getting to be solid if bind successfully. 3. Receiver LED status meanings:
- PP RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module EP1/EP2 RX: LED solid means bind successful or Connection established; LED double-flash means in bind mode; LED flash slowly means no signal connection from the TX module; LED flash fast means in WIFI hotspot mode, you can connect the WIFI of the RX and upgrade firmware of the RX via visit 10.0.0.1(password:expresslrs)
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon
Looking For Something Else?
Search