RATTMMOTOR CNC Digital Stepper Driver, 4-Axis Stepper Motor Driver NV5160T4 Pulse/Direction Controller 12-48VDC Max 6A 256 Micro-Step Resolutions for Nema 23, 24 and Nema 34 Stepper Motor
Asin: B0BW3V8QCZ | Model: NV5160T4 | PartNumber: NV5160T4 | Ean: 0754193412019 | UPC: 754193412019
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Performance Features②】Nv5160t4 Driver Has Adjustable Quiescent Current, Up To 256 Adjustable Subdivisions, Pulse Response Frequency Up To 1Mhz, With Input Signal Opto-Isolation, H-Bridge Bipolar Constant Current Drive And Other Features..
【8 Selectable Micro-Step Resolutions】The Optional Values Of Micro-Step Resolutions Are 2, 4, 8, 16, 32, 64, 128, 256..
【Driver (Parameter) Setting] Nv5160t4 Relies On The Screen And 4 Keys To Configure Parameters, Configurable Parameters Include Motion Current, Quiescent Current And Subdivision..
【Current Parameter Setting】The Optional Values Of Current Parameter Are 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 3.5A, 4A, 4.5A, 5A, 5.5A, 6A..
【Driver Interface】The Driver Interface Contains Five Groups Of Interfaces, Including Power Supply Interface, Stepper Motor Interface, Pulse Control Interface, Input And Output Interface, And Bus Interface..
【Performance Features ①】Nv5160t4 Driver's Power Supply Voltage Is 12-48Vdc; High Current, Up To 6A, Can Drive 86 Motors (Need External Forced Heat Dissipation Can Reach 6A), 8-Speed Optional; With Automatic Over-Current And Over-Voltage Protection Function..
Features
- Product Overview The driver is a high-performance 4-axis stepper motor driver that supports pulse direction control. It has the advantages of strong anti-interference ability, good stability, low cost, etc. It also has the advantages of small size, low heat generation and high power.
- Performance features NV5160T4 driver's power supply voltage is 12-48VDC; high current, up to 6A, can drive 86 motors (need external forced heat dissipation can reach 6A), 8-speed optional; with automatic over-current and over-voltage protection function.
- Performance features NV5160T4 driver has adjustable quiescent current, up to 256 adjustable subdivisions, pulse response frequency up to 1MHz, with input signal opto-isolation, H-bridge bipolar constant current drive and other features.
- Driver interface The driver interface contains five groups of interfaces, including power supply interface, stepper motor interface, pulse control interface, input and output interface, and bus interface.
- Driver (parameter) setting] NV5160T4 relies on the screen and 4 keys to configure parameters, configurable parameters include motion current, quiescent current and subdivision.
- Current parameter setting The optional values of current parameter are 0.5A, 1A, 1.5A, 2A, 2.5A, 3A, 3.5A, 4A, 4.5A, 5A, 5.5A, 6A.
- 8 Selectable micro-step resolutions The optional values of micro-step resolutions are 2, 4, 8, 16, 32, 64, 128, 256.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon Similar To RATTMMOTOR CNC Digital Stepper Driver
#1
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 pounds
See On Amazon #3
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 Inches
See On Amazon #4
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #5
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #6
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
Asin: B072N4FMRN | Model: LKB02 | PartNumber: LKB02 | Ean: 8414771507439
★ Premium Quality ★ Each Part Of This Logrunner 3D Printer Conk Kit Was Made Of Premium Material. These Components Can Be Used In A Wide Range Of Application..
★ Good After-Sales Service. We'll Respond Within 24 Hours For Any Questions..
★ Drv8825 Stepper Motor Driver With Heat Sinks ★ High Quality Stepper Motor Drive With 4 Aluminum Cooler, Running Within 2.5A Current (Maximum), Compatible With For Arduinoide Software And Hardware..
★ Professional 3D Printer Cnc Kit ★ This Is A Professional 3D Printer Diy Kit With Multiple Types Of Modules Or Components You Need. It Is A Great Assortment Set For Starters And Professionals..
Features
- Latest CNC Shield Expansion Board V3.0 -CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- Professional 3D printer CNC Kit This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- Premium Quality Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- DRV8825 Stepper Motor Driver with Heat Sinks High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- Good after-sales service. We'll respond within 24 hours for any questions.
- See more on Amazon...
Brand: Longruner | Manufacturer: Longruner
Dimensions: 0.04 x 0.04 x 0.04 inches | Weight: 0.84 Pounds
See On Amazon #7
STEPPERONLINE DM556T Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24 Stepper Motor
Asin: B074TBMC7N | Model: DM556T | PartNumber: DM556T | Ean: 0715776786842, 0715624558744 | UPC: 715776786842, 715624558744
Suit For 23 And 24 Stepper Motor.
Professional Driver, Manufactured By Leadshine.
Features
- Top-level Quality, Affordable Price
- Professional Driver, Manufactured by Leadshine
- Suit for 23 and 24 Stepper Motor
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: Leadshine Technology Co., Ltd.
Dimensions: 2.97 x 1.33 x 1.33 inches | Weight: 0.66 pounds
See On Amazon #8
SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill
Asin: B0093Y897A | Model: CECOMINOD047429 | PartNumber: CECOMINOD047429 | Ean: 6955170898404
Relay Output Control Interface, Can Be Accessed By The Spindle Motor Or The Air Pump, Water Pump, Etc.
Five-Axis Job Led Display, Visual Display Products, Working Condition.
The Two-Stage Signal Processing, Signal Transmission Smooth, Powerful Anti-Jamming.
Features
- The maximum matching 5-axis stepper motor driver
- The two-stage signal processing, signal transmission smooth, powerful anti-jamming
- Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc
- Five-axis job LED display, visual display products, working condition
- See more on Amazon...
Brand: SainSmart | Manufacturer: Sign Smart (SainSmart)
See On Amazon #9
RATTMMOTOR 3D Printer CNC Controller Kit Compatible with Arduino IDE, Nema17 Stepper Motor+UNO R3 Improvement Borad+CNC GRBL Shield Board V3 Expansion Board+DRV8825 Drivers+Mechanical Switches
Asin: B08KXL4GH7 | Model: 3D-4401J | PartNumber: 3D-4401J | Ean: 0619191755295, 0754193620124 | UPC: 754193620124, 619191755295
【Cnc Shield Board V3 Expansion Board】This Expansion Board Can Be Used As A Drive Expansion Board For Engraving Machines, 3D Printers, Etc..
【Mechanical Switches With 3-Pin Cable】Under Normal Circumstances, The System Needs To Be Equipped With At Least 3 Mechanical Switches;Easy To Install, More Common Styles..
【Drv8825 Stepper Motor Driver】Six Different Stepping Modes: Full, Half, 1/4, 1/8, 1/16, 1/32; The Adjustable Potentiometer Can Adjust The Maximum Current Output, So As To Obtain A Higher Step Rate..
【Uno R3 Improvement Borad】 Uno Is A Simple I/O Platform Based On Open Source Code, And Has A Processing/Wiring Development Environment Similar To Java And C Language, Which Is Easy To Understand, Allowing You To Quickly Use Unc To Make Interesting Things.
Features
- Nema17 Stepper Motor Step angle: 1.8deg; Rated current: 1.7A; Holding torque: 0.45Nm (64 oz.in) ; Size: 40mm; Phase: 2; 1.8 5% step angle (200 steps / rotation)
- UNO R3 Improvement Borad UNO is a Simple I/O platform based on open source code, and has a Processing/Wiring development environment similar to Java and C language, which is easy to understand, allowing you to quickly use UNC to make interesting things
- CNC Shield Board V3 Expansion Board This expansion board can be used as a drive expansion board for engraving machines, 3D printers, etc.
- DRV8825 Stepper Motor Driver Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32; The adjustable potentiometer can adjust the maximum current output, so as to obtain a higher step rate.
- Mechanical Switches with 3-pin Cable Under normal circumstances, the system needs to be equipped with at least 3 mechanical switches;easy to install, more common styles.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #10
Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs
Asin: B07L74WZPS | Model: LY211 | PartNumber: LY211 | Ean: 0657835638825 | UPC: 657835638825
Jm Connects The Motor..
Jc's Esdg Corresponds To The Enablestepdirgnd Drive Signal Output On The Connection..
Jv Connects 5V And 12V-24V Power Supplies..
The Position Where The Jumper Hits The On Dp Indicates 16 Subdivisions (4988) Or 32 Subdivisions (8825)..
Features
- The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
- The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connects the motor.
- Jv connects 5V and 12V-24V power supplies.
- Jc's ESDG corresponds to the EnableStepDirGnd drive signal output on the connection.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #11
RATTMMOTOR 3pcs Nema23 Stepper Motor 23HS2430 Single Shaft 57mm 57mm 112mm Stepper Motor 2-Phase, 425oz-in, 8mm Shaft, 1.8 , 3A, 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C4GW3SQ2 | Model: 23HS2430-3P | PartNumber: 23HS2430-3P | Ean: 0754193411753 | UPC: 754193411753
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS2430 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 0.00 x 2.24 Inches | Weight: 10.80 pounds
See On Amazon #12
Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 3 pcs)
Asin: B088CRCMP7 | Model: TB6600-3pcs | PartNumber: TB6600-3pcs | Ean: 0778107677417 | UPC: 778107677417
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included :3 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
See On Amazon #13
ALMOCN TB6600 Stepper Motor Driver 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor for CNC (3pcs)
Asin: B09Y5G5YMS | Ean: 0701715475670 | UPC: 701715475670
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
Application:Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Over-Heat Protection:Stepper Motor Driver Not Only With Large Area Heat Sink And Automatic Semi-Flow,But Also With Overheat Circuit Protection..
The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor..
Features
- H bridge bipolar constant phase flow drive,9V-42V DC power supply.The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Over-Heat Protection:Stepper motor driver not only with large area heat sink and automatic semi-flow,but also with overheat circuit protection.
- Application:Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: ALMOCN | Manufacturer: ALMOCN
See On Amazon #14
A4988 Stepper Motor Driver Module for Pololu RepRap 3D Printer StepStick (Pack of 2)
Asin: B07QT7N3T2 | Ean: 0732387204992 | UPC: 732387204992
Uses Just 2 Pins From The Microcontroller, One For Controlling The Rotation Direction And The Other For Controlling The Steps.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
8V To 35V Output Voltage Range At Up To 2A Current.
Simple Step And Direction Control Interface With Five Step Resolutions: Full-Step, Half-Step, 1/4-Step, 1/8-Step, And 1/16-Step.
Features
- Control a bipolar stepper motor at up to 2 A current per phase. An onboard potentiometer is used to adjust the current output
- Simple step and direction control interface with five step resolutions: full-step, half-step, 1/4-step, 1/8-step, and 1/16-step
- Uses just 2 pins from the microcontroller, one for controlling the rotation direction and the other for controlling the steps
- 8V to 35V output voltage range at up to 2A current
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: Envistia | Manufacturer: Envistia Mall
Weight: 16.00 Grams
See On Amazon #15
Bolsen 5pcs/lot Reprap Stepper Driver pololu A4988 Stepper Motor Driver Module with Aluminum Heat Sink for ramps 1.4 3D Printer
Asin: B07G15Z31B | Ean: 8846977555691
Brand: Bolsen | Manufacturer: Bolsen
See On Amazon #16
CNCTOPBAOS USB 3 Axis Mach3 CNC Controller Kit,Nema23 Stepper Motor Driver CNC Kit,425oz-in 2.8Nm 3A,4 Axis CNC Motion Control Card USB Board+36V DC Power Supply
Asin: B0CCP2XTT2
♞【4 Axis Usb Mach3 Control Board】Usb Interface Is Applicable To Any Netbook, Notebook, Desktop, Tablet And Other Pc Compatible Computers With Usb Interface. This Control Board Does Not Require Any Drivers To Be Installed. As Long As Mach3 Can Run, The Control Card Can Be Used; Support Computer System:Windows 2000/ Xp / Windows 7/8/10; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;.
♞【Application】This Cnc Kit Are Widely Used In Engraving Machine, Printer, Medical Equipment, Embroidery Machine, Stage Lighting, Textile Automation, Printing, Packaging And Other Industries Automation Equipment..
♞【36V Dc Power Supply】400W 36V 9.7A Dc Switching Power Supply; Output Voltage:36V ; Input: 110-120V Ac Or 220-240V Ac;Selected By Side Switch To Choose Input Voltage..
♞【Dm556s Stepper Motor Driver】Current: 1.0A-6.0A ; Driver Microstep: 200-51200 Subdivision,Adopts 32-Bit Dsp Digital Processing Technology ; Input Voltage: 20-50V Dc; Due To The Use Of Built-In Micro-Subdivision Technology, Even In The Conditions Of Low Subdivision, But Also Can Achieve High Subdivision Effect, Low, Medium And High-Speed Operation Is Very Smooth, Ultra-Low Noise..
Features
- 23HS2430B Nema23 Stepper Motor Holding Torque: 425oz-in,2.8Nm; Current: 3.0A; Step Angle:1.8 ; Phase:2 ; Shaft: 8mm dual shaft ; Type:Hybrid ; Lead: 4-lead ; Size:57x57x112mm
- DM556S Stepper Motor Driver Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC; Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
- 36V DC Power supply 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC;selected by side switch to choose input voltage.
- Application This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #17
RATTMMOTOR DM556S Stepper Motor Driver MAX 6A CNC Digital Stepper Motor Controller 200-51200 Micro-Step Resolution, 20-50VDC, Drive 4,6,8-Wire 2-Phase Stepper Motor for CNC Router Engraving Machine
Asin: B0C4H44Y7Y | Ean: 0754193411685 | UPC: 754193411685
【Automatic Parameter Upper Power Matching Motor Function】The Parameter Upper Power Automatic Setting Function Is Integrated Inside The Driver, Which Can Automatically Generate The Optimal Operating Parameters For Different Motors And Maximize The Performance Of The Motor..
【Features】Variable Current Control Greatly Reduces The Heating Of The Motor; The Static Current Is Automatically Halved; Photoelectric Isolation Differential Signal Input; Photoelectric Isolation, Alarm Output; Pulse Response Frequency Up To 500 Khz (Default 200 Khz); Protection Functions Such As Overvoltage, Undervoltage And Overcurrent; Rising / Falling Edge, Io Control Spontaneous Pulse, Single / Double Pulse, High Corresponding / High Speed And Low Vibration, And Self-Test Function..
【Application Field】Suitable For A Variety Of Small And Medium-Sized Automation Equipment And Instruments, Such As: Engraving Machine, Marking Machine, Cutting Machine, Engraving Machine, Plotter, Numerical Control Machine Tool, Automatic Assembly Equipment, Etc. In The User Expects Small Noise, High Speed Equipment In The Application Effect Is Particularly Good..
【Built-In High Segmentation】The User Can Set Any Subdivision Within 200~51200 And Any Current Value Within The Rated Current, Which Can Meet The Application Needs Of Most Occasions. Due To The Use Of Built-In Micro-Fine Technology, Even Under The Condition Of Low Segmentation, It Can Also Achieve The Effect Of High Segmentation, Low, Medium And High Speed Operation Is Very Stable, The Noise Is Very Small..
Features
- Product Introduction DM556S is a digital stepper motor driver, using the latest 32-bit DSP digital processing technology, the driver control algorithm using advanced variable current technology and advanced frequency conversion technology, the driver heat is small, the motor vibration is small, smooth operation.
- Built-in High Segmentation The user can set ANY SUBDIVISION within 200~51200 and any current value within the rated current, which can meet the application needs of most occasions. Due to the use of built-in micro-fine technology, even under the condition of low segmentation, it can also achieve the effect of high segmentation, low, medium and high speed operation is very stable, the noise is very small.
- Automatic Parameter Upper Power Matching Motor Function The parameter upper power automatic setting function is integrated inside the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motor.
- Application Field Suitable for a variety of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, engraving machine, plotter, numerical control machine tool, automatic assembly equipment, etc. In the user expects small noise, high speed equipment in the application effect is particularly good.
- Features Variable current control greatly reduces the heating of the motor; The static current is automatically halved; Photoelectric isolation differential signal input; Photoelectric isolation, alarm output; Pulse response frequency up to 500 KHz (default 200 KHz); Protection functions such as overvoltage, undervoltage and overcurrent; Rising / falling edge, IO control spontaneous pulse, single / double pulse, high corresponding / high speed and low vibration, and self-test function.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #18
CenryKay 10pcs A4988 Stepstick Stepper Motor Driver Module with Aluminum Heat Sink for 3D Printer Reprap
Asin: B0CJY2S46V | Ean: 0790885856440 | UPC: 790885856440
►Micro-Step Operation, Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay)..
►Applications: Stepper Motors /3D Printer/Cnc/Engraving Machines/Supported 3D Printers..
►Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection..
►Five Step Resolutions:Full-Step,Half-Step,Quarter-Step,Eighth-Step,And Sixteenth-Step.Output Drive Capacity Of Up To 35V And±2A..
Features
- A4988 is a complete microstepping motor driver with built-in translator for easy operation.
- Five step resolutions:full-step,half-step,quarter-step,eighth-step,and sixteenth-step.Output drive capacity of up to 35V and 2A.
- Micro-step operation, Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
- Applications: Stepper motors /3D printer/CNC/engraving machines/Supported 3d printers.
- See more on Amazon...
Brand: CenryKay | Manufacturer: CenryKay
See On Amazon #19
GEEETECH 5Pcs TMC2208 Stepper Motor Driver, Ultra-Quiet Driver with 256 Subdivisions, Continuous Drive Current 1.4A, Peak Current 2A, Voltage 4.75V-36V, for 3D Printer (not Include Radiator)
Asin: B0CNRDG719
🍀【Accurate Subdivision Control】: The Flexible Microplyer Interpolation Unit Can Provide Up To 256 Subdivisions, And Can Still Achieve Accurate Sinusoidal Control Even In Systems With Limited Pulse Frequencies. The Subdivision Mode Is Optional With 2, 4, 8, And 16 Subdivisions..
☎【After-Sales】: If You Encounter Any Problems During Operation, Please Contact Us.
🍀【Excellent Heat Dissipation】: The Tmc2208 Silent Driver Has A Large-Area Cooling Position To Lower The Temperature Even Stepper Driver Works For A Long Time..
🍀【Smooth Operation】: Geeetech Tmc2208 Incorporated Spreadcycle Technology And Is Controlled By A Pwm Chopper Module To Make The Motor Run Smoother And Effectively Avoid Losing Steps Or Jittering..
Features
- Ultra-quiet TMC2208 Stepper Driver : TMC2208 is an ultra-quiet two-phase stepper motor driver chip incorporated technology StealthChop2, which can control the motor sound below 10dB decibels to ensure the motor's noiseless movements. UART mode makes it the flexibility to be used with any 3D printed board without redesign or software or hardware changes.
- Smooth Operation : GEEETECH TMC2208 incorporated Spreadcycle technology and is controlled by a PWM chopper module to make the motor run smoother and effectively avoid losing steps or jittering.
- Accurate Subdivision Control : The flexible microplyer interpolation unit can provide up to 256 subdivisions, and can still achieve accurate sinusoidal control even in systems with limited pulse frequencies. The subdivision mode is optional with 2, 4, 8, and 16 subdivisions.
- Excellent Heat dissipation : The TMC2208 silent driver has a large-area cooling position to lower the temperature even stepper driver works for a long time.
- After-sales : If you encounter any problems during operation, please contact us
- See more on Amazon...
Brand: Geeetech | Manufacturer: Geeetech
See On Amazon #20
Tofelf 2pcs Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
Asin: B0C64RDCVD | Ean: 0760606098527 | UPC: 760606098527
✿Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
✿Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
✿Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency.
✿9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use.
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
See On Amazon
Looking For Something Else?
Search