3D Printer 300x250mm/11.8x9.8inch PEI Sheet Double Sided Textured/Smooth Spring Steel Build Plate Flexible Bed with Magnetic Bottom for SV01 SV02 QIDI X-Max 3D Printers
Asin: B0C274XYJ1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Good Quality】: We Use 100% Imported Pei Raw Materials, Which Are Thicker And More Used, Easily Handle Temperatures Up To 130°C And Perfect For Pla, Peek, Abs. The Process Is Upgraded So It Does Not Affect Any Use Of Bubbles. Pei Is Very Expensive Compared To Pet/Peo, But Its Good Performance, Especially High Temperature Resistance And Stability Are Still Ahead. You Get What You Pay For, I Hope You Can Choose More Suitable Products According To Your Own Printing Materials..
【Quality Promise】: All Products Have Undergone Quality Inspection Before Delivery. If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours..
【Practical Features】:Size:300 X250mm/11.8X9.8 Inch Is Suitable For Qidi X-Max And The Same Size Other 3D Printers.If You Are Not Sure, You Can Contact Us To Communicate And Confirm..
【Proven Solution】:No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla，80℃ Petg，And 130℃ Abs Will Stick Well, And After Printing, When Spring Steel Pei Build Plate Cools To Room Temperature, It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still New.Note:The Adaptation Temperature Of Different Materials Is Different. Please Adjust It Reasonably..
Features
- Special Design : Excellent design In a spring steel plate using 2 different materials, one side of smooth film can produce mirror printing effect, the other side of textured spraying, produce matte printing effect, Compared with the same materials design, it is more cost-effective.
- Proven Solution :No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA 80 PETG and 130 ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still new.Note:The adaptation temperature of different materials is different. Please adjust it reasonably.
- Good Quality : We use 100% imported PEI raw materials, which are thicker and more used, Easily handle temperatures up to 130 C and perfect for PLA, PEEK, ABS. The process is upgraded so it does not affect any use of bubbles. PEI is very expensive compared to PET/PEO, but its good performance, especially high temperature resistance and stability are still ahead. You get what you pay for, I hope you can choose more suitable products according to your own printing materials.
- Practical Features :Size:300 x250mm/11.8x9.8 inch is suitable for QIDI X-MAX and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
- Quality Promise : All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: G-Hubble | Manufacturer: Hubble
See On Amazon Similar To 3D Printer 300x250mm 11.8x9.8inch PEI
#1
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Gizmo Dorks PEI Sheet 3D Printer Build Surface 300mm x 300mm (11.8" x 11.8") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVL1SYF | Model: GD-PEI3M-300MM | PartNumber: GD-PEI3M-300MM | Ean: 0887503182125 | UPC: 887503182125
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 300Mm X 300Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 300mm x 300mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 11.80 x 11.80 inches
See On Amazon #3
PEI Sheet(Double-Sided)310mm*320mm and Magnetic Sticker with Adhesive for Creality CR-10S Pro,CR-X,CR-10 Pro V2,Ender 3 Max,CR-10 V3 3D Printer
Asin: B0CB8QGQ2R | Model: PEI 320 | PartNumber: PEI 320 | Ean: 0795847035505 | UPC: 795847035505
【More Affordable And Practical】 Our Pei Sheet Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Additionally, It's Easy To Clean With A Protective Film On The Surface Of The Composite Coating That Is Anti-Scratch And Dustproof..
【Easy Removal】When Used In A 3D Printing Application,Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.Our Surface Is Easily Removed And Flexible,Allowing Prints To Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature.After The Model Printing Is Complete,Simply Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
【Simple Installation】 Our Pei Sheet Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replaces An Ender 3 Max Bed, Cr 10S Pro Bed, Or Any Other Type Of Platform.Our Pei Sheet Is Flexible, Removable, And Sticks To Magnetics Very Well. It's Made With High Strength And Heat Resistance Materials, Including Spring Stainless Steel And Pei Powder Sprayed On The Surface..
【Excellent Adhesion】 Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. Our Pei Sheet Is Compatible With Various Bed Types, Including The Cr-10S Pro Bed, Cr-X Bed,Cr-10 Pro V2 Bed, Ender 3 Max Bed, Cr-10 V3 Bed, And Any Similarly Sized 3D Printer Bed. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without The Need For Glue Or Any Other Adhesives..
Features
- Wide Application Our PEI sheet is 310mm x 320mm, For CR-10S Pro,CR-X,CR-10 Pro V2,Ender 3 Max,CR-10 V3 and similarly sized FDM 3D printers. Our PEI sheet is also compatible with various build plate types, Compatible with PLA, PETG, PEEK, ABS, and any other filaments.
- Excellent Adhesion Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. Our PEI sheet is compatible with various bed types, including the CR-10S Pro bed, CR-X bed,CR-10 Pro V2 bed, Ender 3 Max bed, CR-10 V3 bed, and any similarly sized 3D printer bed. you can print directly onto each side of the double-sided sheet without the need for glue or any other adhesives.
- More Affordable and Practical Our PEI sheet is made with 75% thicker PEI and 25% thicker spring steel than our leading competitors, providing a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Additionally, it's easy to clean with a protective film on the surface of the composite coating that is anti-scratch and dustproof.
- Simple Installation Our PEI sheet is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replaces an Ender 3 Max bed, CR 10S Pro bed, or any other type of platform.Our PEI sheet is flexible, removable, and sticks to magnetics very well. It's made with high strength and heat resistance materials, including spring stainless steel and PEI powder sprayed on the surface.
- Easy Removal When used in a 3D printing application,PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.Our surface is easily removed and flexible,allowing prints to come off the surface easily when the temperature of the heated bed reaches room temperature.After the model printing is complete,simply remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- See more on Amazon...
First Available: 08/24/2023
Brand: UNIDO | Manufacturer: YOOPAI
Warranty: 180
See On Amazon #4
Creality PEI Printing Plate Kit, Spring Steel Platform with Textured PEI Surface, Magnetic Plate Printing Hotbed Parts for Ender-3 Max/CR-10S Pro/CR-10 V3/CR-10 V2/CR-X/CR-X Pro 320 * 310 * 2mm
Asin: B0C6T9MDWT
【Easy Mold Removal】 The Composite Magnetic Material Is Non-Demagnetizing And Easy To Hang And Pick Up. All You Need To Do Is Remove The Surface Of The Build Plate And Bend It Slightly Over And Over Again To Remove The Print Directly. No Need To Scratch, Pry Or Damage The Print!.
【Compatibility】 This Platform Bed Is Compatible With The Following 3D Printers: Ender-3 Max, Cr-10S Pro, Cr-10 V2, Cr-10 V3, Cr-X, Cr-X Pro, Cr-10S Pro V2..
【Customer Service And Compatibility】 320 * 310 * 2Mm Magnetic Bed. This Pei Printing Plate Kit Is Suitable For Cr-10 Series Printers. If You Encounter Any Issues, Please Contact Us Through Amazon. We Will Reply To You Within 24 Hours!.
【Super Strong Adhesion】Soft Magnetic Stickers With Strong Magnetism/Adhesion Can Print Molds Directly On The Frosted Textured Surface Of Pei Building Boards. No Need For Tape And Glue..
Features
- Heat/Wear Resistant Genuine PEI powder coating is heat resistant. Hardened steel spring plate, 200 C resistance, no deformation. PEI Printing Plate has strong high temperature stability, flame retardancy, high abrasion resistance and good print stability.
- Super Strong Adhesion Soft magnetic stickers with strong magnetism/adhesion can print molds directly on the frosted textured surface of PEI building boards. No need for tape and glue.
- Easy Mold Removal The composite magnetic material is non-demagnetizing and easy to hang and pick up. All you need to do is remove the surface of the build plate and bend it slightly over and over again to remove the print directly. No need to scratch, pry or damage the print!
- Customer Service and Compatibility 320 * 310 * 2mm magnetic bed. This PEI Printing Plate Kit is suitable for CR-10 series printers. If you encounter any issues, please contact us through Amazon. We will reply to you within 24 hours!
- Compatibility This platform bed is compatible with the following 3d printers: Ender-3 max, CR-10S Pro, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, CR-10S Pro V2.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.78 x 12.60 x 12.20 inches
Warranty: 12 months warranty
See On Amazon #5
FYSETC 3D Printer Vorn 2.4 350mm Build JanusBPS PEI Sheet 355x355mm/13.9x13.9inch Flexible Spring Steel Sticker Build PlateTextured - Smooth Double Sided Removable Heated Bed Cover Kit for Vorn v2.4
Asin: B09GYB7B2C
Easy To Use, Simply Stick The Sticker Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top.Both Sides Can Be Used To Print, Convenient. The Pei Sheet Is Pre-Sticked By Machine, No Need Worry About Bubbles. Please Peel Off The Profective Film On It Before Using..
The Flexible Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them Slightly! Easy To Adhere To The Printing Surface, Easy To Remove The Prints. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
Most Filaments, Such As Pla, Petg, Can Print Directly On To The Pei Surface Without The Need For Additional Adhesives, Tapes Or Slurry. Kindly Note Printing Abs Needs A Thermal Insulation Environment..
Flexible, Removable, Can Stick To Sticker Very Well. High Strength And Heat Resistance, Apply To The Same Size Vorn 2.4 Printer--350 V2, Sovl Sv03 (Please Measure Your Build Plate Before Ordering,Not Rely On Bulid Volume)..
Features
- A upgrade Replacement printing platform JanusBPS-Build Plate Sheet 355mm/13.9 inch. This JanusBPS kit is one side with Gold Powder, another with a Smooth PEI, comes with a soft sticker base with strong adhesive.
- Flexible, removable, can stick to sticker very well. High strength and heat resistance, apply to the same size Vorn 2.4 printer--350 V2, Sovl SV03 (Please measure your build plate before ordering,not rely on bulid volume).
- Easy to use, simply stick the sticker bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no need worry about bubbles. Please peel off the profective film on it before using.
- Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
- The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #6
Official Creality Ender 3 Max Neo Build Plate Upgrade PEI Sheet 320x310mm Textured PEI Sheet for Ender-3 Max/Ender-3 Max Neo/CR-X Pro/CR-10 V2/V3/CR-10S Pro
Asin: B0CTMD25SS
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes A Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Design - Magnetic Sheet Base Allows The Build Plate To Be Quickly And Conveniently Replaced Without The Need For Additional Tools Or Fixing Methods. The Inclusion Of Dual Handles And Positioning Holes Ensures That The Build Sheet Can Be Accurately Aligned In A Single Step During Installation, Simplifying The Process And Providing Users With A More Efficient Printing Experience..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Prints Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality CR-10S Pro build plate, with dimensions of 320x310mm. Additionally, it is compatible with other FDM printers of the same print size, such as CR-10S PRO, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, CR-10S PRO V2, Ender-3 Max, Ender-3 Max Neo, etc. Please review the detailed information in the images to determine compatibility with your printer.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the prints under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Design - Magnetic sheet base allows the build plate to be quickly and conveniently replaced without the need for additional tools or fixing methods. The inclusion of dual handles and positioning holes ensures that the build sheet can be accurately aligned in a single step during installation, simplifying the process and providing users with a more efficient printing experience.
- In order to save your costs and minimize unnecessary waste, this product only includes a PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #7
Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm (9.3" x 9.3") with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA
Asin: B07GSJSDWR | Model: GD-PEI3M-235MM | PartNumber: GD-PEI3M-235MM | Ean: 0887503182606 | UPC: 887503182606
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 235 X 235Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Ender 3 Or Creality Cr 20 Perfectly!.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 235 x 235mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality Ender 3 or Creality CR 20 perfectly!
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 9.25 x 9.25 inches | Weight: 0.13 Pounds
See On Amazon #8
Double Sided Textured PEI Sheet, 3D Printer Parts Printing Plate Frosted PEI Surface 310 x 310 mm for CR-10 CR-10S Anet A8+, E12,3D Printers(Without Magnetic Bottom Sheet)
Asin: B09YY4L4K1 | Model: MY001 | PartNumber: MY001 | Ean: 0705548422535 | UPC: 705548422535
【High Temperature Resistance】:Genuine Pei Powder Coating Is Heat Resistant Which Temperature Resistance Can Be Up To 200℃ With No Deformation.
【Easy To Use】Pei Spring Steel Easy To Remove The Plastic Parts By Bending And Popping It Off When Cooling, Easy To Print, Easy To Maintain.
【Textured Surface】:The Textured Side Makes The Bottom Of The Prints Show A Matte Texture And Retain The Frosted Feeling.And Perfect For Pla/Abs/Tpu/Pefg/Nylon..
【Double-Sided】】:Pei Magnetic Flexible Bed Has Double-Sided Pei Coating, Both Sides Can Be Used..
Features
- Upgrade PEI Sheet :310mm x 310mm/12.2x12.2 inch, compatible with CR-10 10S Pro CR-X MP Maker Pro, Long LK1/ PRO LK5 PRO/Artilery X1ease measure your bed, not rely on build volume/printing size.
- Double-sided :PEI magnetic Flexible bed has double-sided PEI coating, both sides can be used.
- High Temperature Resistance :Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200 with no deformation
- Textured Surface :The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling.And perfect for PLA/ABS/TPU/PEFG/Nylon.
- Easy to use PEI Spring steel Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain
- See more on Amazon...
Brand: MYOSOTIS | Manufacturer: china
See On Amazon #9
SUNLU 3D Printer Bed,PEI Magnetic Build Textured Surface, Gold Frosted PEI Sheet for 3D Printers, 9.25x9.25inchs (235x235mm), 2 PCS PEI Sheet Black+Gold +1 PC Base Sticker Sheet
Asin: B0BWXGHC4K
③【Durability Easy To Clean 】Sunlu Pei Magnetic Build Plate Has Long Service Life Of Stainless Steel.Sunlu Pei 3D Printer Bed Adhesive Use A Soft Cloth To Clean The Dust. Gently Wipe The Stain With Low Concentration Of Alcohol..
⑤【Super Easy Print Removal】 Sunlu 3D Printer Platforms Pei Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model. The Prints Are Pretty Easy To Remove Once You're Done Printing..
④【Stronger Magnetic Ddhesion】Sunlu Pei 3D Printer Bed More Flexible And Resistant To Bending.Great First-Layer Adhesion,Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform.Sunlu Magnetic 3D Printer Bed Platforms Had Solid Adhesion And The Print Went Well..
②【Frosted Surface】Sunlu Pei Magnetic Sheet Printing Board Has Smooth Surface, Which Will Not Leave Any Trace On The Bottom Of The Printed Material. There Is A Good Combination Of Hot Melt Material And Printing Layer, Which Can Reduce The Deformation Caused By Shrinkage And Avoid Warping..
Features
- Packing List (3PCS) SUNLU 3D printer PEI magnetic build plate size 235*235mm 9.25*9.25inch . 3 pieces sheet in total: 2 pieces of PEI Print Surface Sheet Gold+Black and 1 piece of sticker base sheet.
- Frosted Surface SUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.
- Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.
- Stronger Magnetic Ddhesion SUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
- Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon #10
CHPOWER for Creality CR10 Bed Plate, 300x300 Build Plate, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover for CR-10 V3 /Ender 3 Max- 310x310mm
Asin: B07J69T6SK | Model: CR-10 magnetic heated bed | PartNumber: CR-10 magnetic heated bed
300Mm Magnetic Bed: Durability & Easy Clean: Cr-10 Bed Surface Is Capable To Work At 70ºc. Easy Clean With Alcohol..
More Flat For Precision: Super Flatness. Prevent Warping. Fast And Uniform Heating. More Precise On Printing, Especially The Bottom Of The Prints..
Simple Installation: This Cr-10 Plate Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Size: 300X300mm Magnetic Bed. Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Features
- EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
- SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
- 300mm magnetic bed: DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70 C. Easy clean with alcohol.
- SIMPLE INSTALLATION: This CR-10 plate comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- MORE FLAT FOR PRECISION: Super Flatness. Prevent warping. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #11
Gizmo Dorks PEI Sheet 12" x 12" (305mm x 305mm) 1mm Thick 3D Printer Build Surface Ultem 1000, Made in The USA
Asin: B074XG1NDM | Model: GD-POLYPEI-12x12 | PartNumber: GD-POLYPEI-12x12 | Ean: 0887503180718 | UPC: 887503180718
Remove Film From Both Sides Before Using: Blue Protective Film Guards Against Scratches During Shipping And Handling..
Sheet Can Be Easily Cut Down To Desired Size By Scoring With A Utility Knife.
Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
Features
- MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
- REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
- Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
- Sheet can be easily cut down to desired size by scoring with a utility knife
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.04 x 12.00 x 12.00 inches
See On Amazon #12
HzdaDeve 250X250MM PEI PEO Build Plate Build Sheet Heated Bed Spring Steel Flexible Platform One Side Textured and One Side Smooth Board for Artillery Sidewinder X3 Pro/Sidewinder X4 Pro 3D Printer
Asin: B08KS2LF3F
Special Material: Made Of Polyethylene Which Is Inherently Flame Resistant And Low In Smoke Production, High Strength And Heat Resistance..
Easy For Removal: Peel Up The Top Part From The Heat Bed And Bend It To Take Off Models Easily As It’S Flexible..
Excellent Flatness: It Provides The Most Flat Build Surface In The Market, Ensuring High Flatness For The Bottom Of Print, To Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform..
Excellent Adhesion With One Side Textured Spray Pei And One Side Diamond Smooth Surface Peo Spring Steel Plate, It Has Strong Adhesion To Adhere The Model In A Better Way. You Can Use Either Side..
Features
- Compatible Printer: The PEI and PEO build plate is for Artillery Sidewinder X3 Pro/Sidewinder X4 Pro.
- Excellent adhesion with one side textured spray PEI and one side diamond smooth surface PEO spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
- Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Easy for removal: Peel up the top part from the heat bed and bend it to take off models easily as it s flexible.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: parts
See On Amazon #13
Gizmo Dorks PEI Sheet 3D Printer Build Surface 220mm x 220mm (8.6" x 8.6") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVQJ7QK | Model: GD-PEI3M-220MM | PartNumber: GD-PEI3M-220MM | Ean: 0887503182132 | UPC: 887503182132
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 220 X 220Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 220 x 220mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 8.60 x 8.60 inches | Weight: 0.10 Pounds
See On Amazon #14
Gizmo Dorks PEI Sheet 3D Printer Build Surface 310mm x 320mm Compatible for CR-10S Pro or Pro V2, Made in The USA
Asin: B0866BV7KJ | Model: GD-PEI3M-310-320 | PartNumber: GD-PEI3M-310-320 | Ean: 0887503183269 | UPC: 887503183269
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Pei Dimensions: 310Mm X 320Mm X 0.56Mm / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Cr-10S Pro V2, Ender 3 Max, And Other Printers Perfectly.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- PEI Dimensions: 310mm x 320mm x 0.56mm / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality CR-10S Pro v2, Ender 3 Max, and other printers perfectly
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 12.60 x 12.20 Inches | Weight: 0.23 Pounds
See On Amazon #15
FYSETC 3D Printer Accessories SnapmakerA250T A250 Printing Platform: Smooth PEI - Textured Build Plate Heated Bed Surface with Sticker Adhesive 244x264mm/9.6x10.4inch
Asin: B0C3QTQ258
Comes With Magneticc Sticker, Simply Stick The Soft Sticker Sheet Onto Your Heated Bed And Place The Flexible Pei Build Plate Platform On It. The Sticker Bottom Holds The Flexible Build Plate Very Tightly. Once You Have Finished Printing, Remove The Spring Steel Plate, Flex The Print Off, And Snap The Pei Plate Back Onto The Sticker Sheet. Prints Are Removed Easily Without Any Scratches Or Damage..
Size: 244*264, Please Measure Your Hotbed Before Ordering,.
The Removable Flexible Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them Slightly! Easy To Adhere To The Printing Surface With Strength When Heated, Easy To Releases Them Effortlessly When Cooled. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Bends For Easy Removal Of Prints..
Easy To Remove Model: Fit For Most Filament, Like Abs Tpu Pla Petg Etc Printing Material. It Is Easy To Move After Bed Cooling, No Need Adhesive Or Glue Stick..
Features
- A must-have spare parts Removable build surface: made of spring steel and smooth pei, coated pei, print bed surface, double printing side can meet your different filament need. The Smooth Side pre-applied a pei sheet leaves a glossy, reflective finish. The Textured-powder Side leaves a textured matte finish. Give you two different experience just by flipping it over.!!
- Easy to remove model: fit for most filament, like ABS TPU PLA PETG etc printing material. It is easy to move after bed cooling, no need adhesive or glue stick.
- Comes with magneticc sticker, Simply stick the soft sticker sheet onto your heated bed and place the flexible PEI build plate platform on it. The sticker bottom holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the pei plate back onto the sticker sheet. Prints are removed easily without any scratches or damage.
- The removable flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface with strength when heated, easy to releases them effortlessly when cooled. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, bends for easy removal of prints.
- Size: 244*264, please measure your hotbed before ordering,
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #16
ENOMAKER PEI Spring Steel Magnetic Double Sided Bed Sheet Smooth and Textured Platform Removable Flexible Bed Sticker Build Surface for for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X,310x320mm
Asin: B0BDLF4XZQ | Model: ENO-Dual-PEI-310x320 | PartNumber: ENO-Dual-PEI-310x320 | Ean: 0764481225627 | UPC: 764481225627
【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture + Smooth Pei Sheet】One Side Frosted, One Side Smooth, Two Kinds Of Surface To Meet Your Different Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X etc.
- Double Sided Texture + Smooth PEI Sheet One side frosted, one side smooth, two kinds of surface to meet your different printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #17
CCTREE PEI Spring Steel Magnetic Base, 310 * 320mm Double-Sided Smooth/Textured Platform Removable Flexible Bed Sticker Build Surface for Creality CR-10S Pro&V2&V3/Ender 3 Max&S1 Plus/AnyCubic Mega X
Asin: B0B8VX4GGP | Ean: 0738627015014 | UPC: 738627015014
【Excellent Adhesion】: Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double-Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature. It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
【Easy Removal】:His Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Heated Bed Temperature Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
【Compatibility】The Size Of Pei Sheet Is 310*320Mm,It Is Suitable For Creality Cr-10S Pro / V2 / V3, Ender 3 Max, Anycubic Mega X And Other 3D Printers. If Your 3D Printer Has A 310X320mm Heat Bed Platform, This Pei Sheet Is Compatible With Your 3D Printer..
【Textured/Smooth Double-Sided Pei】:Our Double-Sided Pei Flex Plate Features One Powder-Coated Pei Surface That Leaves A Textured Matte Finish On Your Parts And One Smooth Pei End That Leaves A Glossy, Reflective Finish On The Bottom Of Your Interests!.
Features
- Simple Installation Stick the soft magnetic base to the heating bed of your 3D printer then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- Textured/Smooth Double-Sided PEI :Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI end that leaves a glossy, reflective finish on the bottom of your interests!
- Excellent Adhesion : Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double-sided PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- Compatibility The size of PEI sheet is 310*320mm,It is suitable for Creality CR-10S Pro / V2 / V3, Ender 3 Max, AnyCubic Mega X and other 3D printers. If your 3D printer has a 310x320mm heat bed platform, This PEI sheet is compatible with your 3D printer.
- Easy Removal :his surface is easily removed and flexible. Prints come off the surface easily when the heated bed temperature reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- See more on Amazon...
Brand: CCTREE | Manufacturer: CCTREE
See On Amazon #18
Comgrow PEI Magnetic Flexible Heated Bed Removable PEI Sheet with Adhesive 310x310mm for CR-10 / CR-10S 3D Printer
Asin: B09F6Q4CYM
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Compatible With Pla、Petg、Peek、Abs And Any Other Filaments..
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance.
- Compatible with PLA PETG PEEK ABS and any other filaments.
- No more tape, no more glue, no more shovel, and release your printing anxiety.
- Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #19
IdeaFormer-3D 3pcs Magnetic Build Surface (310 X 310mm) Flexible Removable Print Bed (2 pcs Print Surface + 1 pcs Base) for 3D Printer Hotbed(310x310)
Asin: B09B72CTDY | Model: HBD-MSK | PartNumber: HBD-MSK
Material: We Are Pc Material, Long-Term 80 Degrees. More Than 80℃ Of Magnetic Performance Will Weaken But Not Lose Magnetism, So Can Be Applied To Polylactic Acid And Other Filaments. Pc Material Flame Retardant, Wear-Resistant..
Please Do Not Allow The Heated Nozzle To Come Into Direct Contact With The A-Plate! For Ease Of Operation, The Desktop Is Heated To 50 Degrees C When The Model Is Taken, And Then The Model Is Taken..
Specification: Aab Three Sides In The Package, A Side Is Greater Than B Side (Actual Size Is B Side) Dimensions: 150X150/200X200/214X214/220X220/235X235/310X310mm..
Easy To Use: Can Be Installed On Hot Beds And Glass Platforms. Printing Is Not Warping. No Glue Is Required. Can Be Printed On A Cold Bed. The A-Plate Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model..
Features
- Features: The product includes three pieces of stickers(2pcs A plate and 1pcs B plate). It s surprising that our product is more 1pcs A plate than other brands. It can be reused and means that replacing the new A side is more time-saving. (The A plate is 5mm wider than the B plate)Kindly Tips:Our magnetic platform A and B must be used in pairs.
- Easy to use: Can be installed on hot beds and glass platforms. Printing is not warping. No glue is required. Can be printed on a cold bed. The A-plate is flexible and magnetic, making it easy to move off the platform and take away the printing model.
- Material: We are PC material, long-term 80 degrees. More than 80 of magnetic performance will weaken but not lose magnetism, so can be applied to polylactic acid and other filaments. PC material flame retardant, wear-resistant.
- Specification: AAB three sides in the package, A side is greater than B side (actual size is B side) dimensions: 150x150/200x200/214x214/220x220/235x235/310x310mm.
- Please do not allow the heated nozzle to come into direct contact with the A-plate! For ease of operation, the desktop is heated to 50 degrees C when the model is taken, and then the model is taken.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
Dimensions: 0.00 x 0.01 x 0.01 inches | Weight: 2.14 Pounds
See On Amazon #20
FYSETC 3D Printing Platform 300x250mm/11.8x9.8inch Textured Double-Sided PEI Powder Coated Build Plate Flexible Removable Spring Steel Sheet Compatible with SV01 SV02 QiD X-Max 3D Printers
Asin: B09TH2HBFY
Made Of High Quality Stainless Steel. Very Easy To Use, Simply Put It Onto The Hotbed, Then Adjust The Bed Temp According To The Printing Filament. Please Level The Build Plate Well Before Printing& Do Not Let Heated Nozzle Touch The Plate Directly..
It Behaves As Most Pei Sheets Would And Works Great With Pla, Tpu, Petg, Abs, As Well As Many Other Filaments. If You Need More Adhesion For Tough-To-Stick Filaments Like Nylon, Feel Free To Use Glue Sticks, They Will Wash Off With Water After Use..
Excellent Adhesion, Easy Model Removal, No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
Double Sided Pei Powder Sheet, Both Sides Can Be Used Freely. Flexible, Removable, Can Stick To Bottom Base Very Well. High Strength And Heat Resistance..
Features
- A New upgrade part for your QiD X-Max Printer, or DIY your own printer, which has a magletic hotbed itself or a sticker sheet(300x250mm/11.8x9.8inch). There may be 5-10mm deviation compared with the SV01/SV02 heat bed, if not mind it, just buy it.
- Double sided PEI powder Sheet, Both sides can be used freely. Flexible, removable, can stick to bottom base very well. High strength and heat resistance.
- Made of high quality stainless steel. Very easy to use, simply put it onto the hotbed, then adjust the bed temp according to the printing filament. Please level the build plate well before printing& do not let heated nozzle touch the plate directly.
- Excellent Adhesion, Easy Model Removal, No more tape, no more glue, no more shovel, and release your printing anxiety. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon
Looking For Something Else?
Search