Frontpage > Toys and Hobby > Remote Controlled Vehicles > A Arms

Best A Arms - Buying Guide

Last Updated: 12/12/2019

Share on


  #1

RPM 81482 Front Upper and Lower A-Arms for Arrma Kraton, Talion and Outcast, Black

Model: RPM81482   |    Mpn: RPM81482   |    Ean: 0672415814826   |    PartNumber: RPM81482   |   Asin: B06ZY1D68W

RPM A-arms for the ARRMA Kraton, Talion and Outcast as well as the Durango DEX8T are designed primary for strength and durability but we ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, our front A-arms are roughly 10% lighter than stock (59.5g RPM versus 66g stock)! RPM A-arms are designed with leading and trailing 30 chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst! Tech Notes: RPM ARRMA Kraton, Talion, Outcast and Durango DEX8T A-arms are sold as one upper and one lower in each package. Two packages are needed for each vehicle. Our A-arms replace stock ARRMA #AR330218 and #AR330219 and also replaces stock Durango #TD330709 and #TD330710.

Features

  • Designed to increase durability
  • Replaces weaker stock components, check for full parts compatibility
  • Made by RPM R/C products, a United States based company where resources are sourced from American producers
  • Replaces stock arrma #AR330218 and #AR330219; Replaces stock durango #Td330709 and #Td330710
  • Also fits the Durango DEX8T
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRPAA

Item Dimensions: 8.5 x 1 x 3 inches (21.6 x 2.5 x 7.6 cm)   |   Package Dimensions: 1.14 x 2.99 x 7.56 inches (2.9 x 7.6 x 19.2 cm)

First Available: 2017-01-01

Amazon Price: $8.58 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.54

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

RPM 80705 Front/Rear A-Arms Blue Slash/Stampede 4x4 Blue

Model: RPM80705   |    Mpn: 80705   |    Ean: 0885731281702   |    PartNumber: 80705   |   Asin: B0039N4ILM

Features

  • For the Traxxas Slash 4x4 and Stampede Front or Rear A-arms
  • Tech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.42 x 4 x 4 inches (1.1 x 10.2 x 10.2 cm)   |   Package Dimensions: 0.4 x 4.7 x 6.7 inches (1.0 x 11.9 x 17.0 cm)

Amazon Price: $7.80 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: Please refer to manufactuer warranty. If there are manufacture defects or any quality issues upon receiving your products, please contact us immediately. To return items, please keep the item condition new.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black

Model: RPM80702   |    Mpn: 80702   |    Ean: 0885313655839   |    PartNumber: 80702   |   Asin: B0039N87Q4

Features

  • For the Traxxas Slash 4x4 and Stampede Front or Rear A-arms
  • Tech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.39 x 4 x 4.1 inches (1.0 x 10.2 x 10.4 cm)   |   Package Dimensions: 0.25 x 4 x 6 inches (0.6 x 10.2 x 15.2 cm)

Amazon Price: $7.90 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: Please refer to manufactuer warranty. If there are manufacture defects or any quality issues upon receiving your products, please contact us immediately. To return items, please keep the item condition new.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Hobbypark 108019 108819 Aluminum Front Lower Arms (L/R) Blue for RC 1/10 Redcat Volcano Epx (PRO) Exceed Infinitive Monster Truck 4WD 08005 Upgrade Parts

 Ean: 0756970383833   |   Asin: B071VHVRPH

Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Aluminum Front Lower Arms
Part No.: 108019
Package Include: 1x Aluminum Front Lower Arms (L/R)

Features:
100% New, Made of high quality Aluminum 6061
CNC machined for precision.Increased strength and precision
4x M3 Grub Screws included (As shown in the picture)
Come with Left & Right Arms

Compatible with:
1/10 Scale Redcat Racing Volcano Epx/epx PRO
1/10 HSP BRONTOSAURUS(Pro)
1/10 Exceed Infinitive EP

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Produced by HobbyPark,Compatible with: 1/10 Scale Redcat Racing Volcano Epx/epx PRO // HSP BRONTOSAURUS (Pro) // Exceed Infinitive EP
  • CNC machined for precision.Increased strength and precision
  • 4x M3 Grub Screws included (As shown in the picture)
  • Come with Left & Right Arms
  • Customer Satisfaction Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: DNhobby

Item Dimensions: 0.47 x 3.62 x 5.98 inches (1.2 x 9.2 x 15.2 cm)   |   Package Dimensions: 0.47 x 3.62 x 5.98 inches (1.2 x 9.2 x 15.2 cm)

Amazon Price: $15.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

RPM Front A-Arm 2WD Slash, Rustler, Stampede, Nitro Slash, Green

Model: RPM80244   |    Mpn: 80244   |    Ean: 0672415802441   |    PartNumber: 80244   |   Asin: B00681RS2S

RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we've increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers. RPM front A-arms for the Traxxas Slash, e-Rustler & e-Stampede are sold in pairs and are available in either black or blue. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm's ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.

Features

  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
  • These A-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.75 x 4 x 4.25 inches (1.9 x 10.2 x 10.8 cm)   |   Package Dimensions: 0.5 x 1.5 x 3.8 inches (1.3 x 3.8 x 9.7 cm)

Amazon Price: $7.19 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

Warranty: Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

RPM RPM - 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2) (Pack of 34)

Model: RPM80245   |    Mpn: 80245   |    Ean: 0885730304068   |    PartNumber: 80245   |   Asin: B000JQWQM0

Features

  • For use on the E-Rustler, Stampede, Monster Jam, and Slash
  • Tech Note: These A-arms will not work on the nitro versions of the Rustler and Stampede
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the United States
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP (Level 3 Products)

Item Dimensions: 4.13 x 0.75 x 4.25 inches (10.5 x 1.9 x 10.8 cm)   |   Package Dimensions: 0.28 x 2.99 x 5 inches (0.7 x 7.6 x 12.7 cm)

Amazon Price: $7.14 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

RPM 80595 Rear A-Arms Blue Slash Blue

Model: RPM80595   |    Mpn: 80595   |    Ean: 0762988643456   |    PartNumber: 80595   |   Asin: B001J2SJ2E

Features

  • For the Slash 2WD
  • Tech Notes: RPM Slash 2wd Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.5 x 3.8 x 4 inches (1.3 x 9.7 x 10.2 cm)   |   Package Dimensions: 0.4 x 4.7 x 6.7 inches (1.0 x 11.9 x 17.0 cm)

Amazon Price: $7.78 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: Our warranty policy is simple and easy. If you manage to break the product under normal usage you can return for replacement or refund.If you don't like the parts at whatever reason, you can return for replacement or refund within one month, the package of the returned parts should be in well condition.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

RPM 80709 Traxxas Slash 4x4, Stampede 4x4 and Rally Front Or Rear A-Arms-Red

Model: RPM80709   |    Mpn: RPM80709   |    Ean: 0672415807095   |    PartNumber: RPM80709   |   Asin: B010AX0SKS

RPM A-Arms for the Traxxas Slash 4 4 & Stampede 4 4 are everything you ve come to expect from RPM and more. take a look at everything We ve done: we eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-Arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they re made by RPM, enough said). as a bonus, we cut 6.5 grams of weight off of each A-arm. that s a total loss of just under one ounce of weight simply by replacing your stock A-Arms with the RPM versions. we can t forget about how much better aesthetically the RPM versions look either. RPM A-Arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and Red to choose from. RPM A-Arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products. designed, manufactured and produced right here in Southern California in the USA. Tech notes: Replaces stock Traxxas #3655x. RPM A-Arms for the Traxxas Slash 4 4 & Stampede 4 4 are sold in sets of 1 left and 1 right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4 4) due to strengthening designs that reduce the clearance around the rear axle.

Features

  • Made from high quality materials and designed for long lasting performance
  • Direct OEM parts for a guaranteed fit and finish
  • For use with Savox SB2263MG-CE
  • Replaces stock Traxxas #3655x
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 33 x 0.55 x 3.3 inches (83.8 x 1.4 x 8.4 cm)   |   Package Dimensions: 0.98 x 2.01 x 5.98 inches (2.5 x 5.1 x 15.2 cm)

First Available: 2017-08-22

Amazon Price: $7.64 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.55

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Redcat Racing 08005 Plastic Front Lower Suspension Arm, 2Piece

Model: 08005   |    Mpn: 08005   |    Ean: 0609132454813   |    PartNumber: 08005   |   Asin: B009JMVOMI

Redcat Racing Part # 08005 plastic front lower suspension arm (2 piece). compatible with the following Redcat Racing vehicles: VOLCANO EPX/EPX pro. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

Features

  • Genuine Redcat Racing Replacement part # 08005
  • Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.
  • Please consult your user's manual to ensure this is the correct part for your model.
  • For troubleshooting and Warranty information please contact a Redcat Racing customer service specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.Com
  • Compatible with the following Redcat Racing vehicles: volcano EPX/EPX Pro.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 0.25 x 2 x 4 inches (0.6 x 5.1 x 10.2 cm)   |   Package Dimensions: 0.6 x 3.6 x 4.3 inches (1.5 x 9.1 x 10.9 cm)

First Available: 2018-12-12

Amazon Price: Too low to display | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.49

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

RPM Adjustable Height Body Mounts Traxxas Slash 4x4, Black

Model: RPM73932   |    Mpn: 73932   |    Ean: 0885941141650   |    PartNumber: 73932   |   Asin: B003TVHNJ8

RPM Adjustable Height Body Mounts for the Traxxas Slash 4x4 are designed to give you optional body height positions where stock left you none. Our version of the Slash 4x4 body mount starts off lower than stock by 1/8" (or approx. 3.2mm). We supply a pair of molded spacers to allow you the option of a stock height body position using the thin spacer under the body mount. If monster suspension travel is needed or you just like the higher stance and larger wheel well openings a taller body mount provides, you can increase the height by 1/8" using the thicker of the two spacers. In extreme cases, both spacers may be used for a full 1/4"* (6.35mm) of extra body height. We weren't solely going for looks either. RPM body mounts are just plain tough! We engineered new, larger ribs into the mounts to provide extra rigidity and support for the body while keeping weight to a minimum. We mold these body mounts in black from our proven-tough blend of engineering-grade materials, which provides extra durability and impact-resistance in the most extreme situations. What's Included: Each kit contains two body posts, one body mount bracket, two spacers and two M3 x 16mm mounting screws. Two kits will be needed to complete one vehicle.

Features

  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
  • RPM Body Mounts can be mounted in either the front or rear location on the Traxxas Slash 4x4 & Rally
  • They can only be used on the rear position on the Stampede 4x4
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 1 x 3 x 7 inches (2.5 x 7.6 x 17.8 cm)   |   Package Dimensions: 0.2 x 2.8 x 6.5 inches (0.5 x 7.1 x 16.5 cm)

Amazon Price: $6.45 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.99

Warranty: Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

4-Pack Aluminum Front & Rear Suspension A-Arms & Tie Bar Replacement of 2555 3631 2532 for Traxxas 1/10 Slash 2WD RC Car Upgrade Parts Hop Ups

 Ean: 8414771688190   |    PartNumber: 2555-3631-2532NB   |   Asin: B07W4LSYJL

Customer Service:

If you have any questions during the use and installation process, please contact us, we will solve it for you at the fastest speed.

URCMax's Aluminum Suspension A-Arms&Tie Bar






FEATURE:

Compatible with:Traxxas 1/10 Slash 2WD

Replacement of Parts# 2555 3631 2532

SPECIFICATIONS:

Material: Aluminum Alloy

Color: Dark Blue






YOU WILL RECEIVE:

Four (4) Aluminum Suspension Arms (L/R)

ONE (1) Aluminum Tie Bar

Two (2) Long Pins

Six (6) Screw Pins

Six (6) E-clip

Features

  • These A-Arms Will fit : 1/10 Traxxas Slash 2wd
  • What You Get:2 pair of arms included for front and rear of vehicle 1pcs Tie Bar,Accessories Included.
  • Precision anodized (Dark Blue),Aluminum material, lightweight and durable
  • Made by URCMax,Top-Quality Materials & Superb Craftsmanship
  • See more on Amazon...

Brand: URCMax   |   Manufacturer: URCMax

Item Dimensions: 0.47 x 1.97 x 3.94 inches (1.2 x 5.0 x 10.0 cm)   |   Package Dimensions: 0.63 x 3.82 x 5.98 inches (1.6 x 9.7 x 15.2 cm)

Amazon Price: $31.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Hobbypark 108821 108021 Aluminum Rear Lower Arms (L/R) Blue for 1/10 Redcat Volcano Epx (PRO) Exceed RC Infinitive Monster Truck 08006 Upgrade Parts

 Ean: 0756970383864   |    PartNumber: 19-252   |   Asin: B071NR4YLM

Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Aluminum Rear Lower Arms
Part No.: 108021
Package Include: 1x Aluminum Rear Lower Arms (L/R)

Features:
100% New, Made of high quality Aluminum 6061
CNC machined for precision.Increased strength and precision
4x M3 Grub Screws included (As shown in the picture)
Come with Left & Right Arms

Compatible with:
1/10 Scale Redcat Racing Volcano Epx/epx PRO
1/10 HSP BRONTOSAURUS(Pro)
1/10 Exceed Infinitive EP

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Produced by HobbyPark,Compatible with: 1/10 Scale Redcat Racing Volcano Epx/epx PRO // HSP BRONTOSAURUS (Pro) // Exceed Infinitive EP
  • CNC machined for precision.Increased strength and precision
  • 4x M3 Grub Screws included (As shown in the picture)
  • Left & Right Arms
  • Customer Satisfaction Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: DNhobby

Package Dimensions: 0.39 x 2.09 x 5.59 inches (1.0 x 5.3 x 14.2 cm)

Amazon Price: $15.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Traxxas 2640 Suspension Pins with E-Clips, 44mm (pair)

Model: TRA2640   |    Mpn: 2640   |    Ean: 0020334264008   |    PartNumber: 2640   |   Asin: B0006O5ISY

This is the 2640 Chrome Suspension Pin with Clip 44mm (2) from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.

Features

  • Chrome pins
  • Contains (2) suspension pins
  • Contains (4) clips
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles such as the Traxxas Nitro Stampede; consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 4 x 0.73 x 3.13 inches (10.2 x 1.9 x 8.0 cm)   |   Package Dimensions: 0.3 x 3 x 3.8 inches (0.8 x 7.6 x 9.7 cm)

Amazon Price: $2.50 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $2.50

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Hobbypark Front / Rear Aluminum Suspension Arms (L/R) Replace 3655X Red for 1/10 Traxxas Slash 4x4 Upgrade Parts Fit HQ727

 Ean: 0756970383994   |    PartNumber: 37-635   |   Asin: B072JJYRXT

Attention Pls:This is OEM Replacement of Part#3655x,Produced by HobbyPark,We had upgraded the Arms:Screw pins instead of E-clip pins Check your specific model's manual for compatibility,or Contact us
The color of the item may vary slightly due to photography and your own computer;There's some little error from human measuring.

Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Aluminum Suspension Arms
Package Include:
4x Aluminum Suspension Arms (L/R);
4x Short Screw Pins;
4x Long Pins
4x M3 Screws

Features:
Replacement of Part#3655x,come with Screw pins (the short),Easy to install,the perfect to replace original A-Arms,Highly Recommend
Anodized,CNC machined for precisionIncreased strength and precision.Easy upgrade from the original part;

Compatible with:
Traxxas 1/10 Slash 4X4
Traxxas 1/10 Rally
1/10 Stampede 4X4 VXL
1/10 Stampede 4X4
1/10 XO-1

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Compatible with:Traxxas 1/10 Slash 4x4 4WD / Stampede 4x4 / Stampede 4X4 VXL / Rally / XO-1 RC Car
  • Replacement of Parts# 3655X (We have upgraded the Arms,which come with Screw pins instead of E-clip pins)
  • CNC machined for precision.Increased strength and precision.Easy upgrade from the original part
  • Produced By HobbyPark ,Well made and durable,100% New
  • Pack of 4 (As the picture shown)
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 0.47 x 3.35 x 6.5 inches (1.2 x 8.5 x 16.5 cm)

Amazon Price: $27.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

RPM 73862 Nerf Bars for The Traxxas LCG Slash 2WD, Black

Model: RPM73862   |    Mpn: RPM73862   |    Ean: 0794819497327   |    PartNumber: RPM73862   |   Asin: B0147VX4OG

The chassis layout of the low center of gravity chassis (LCG) Slash 2WD is different than the original high center of gravity chassis (hcg), requiring a different Nerf bar design. Our Slash 2WD LCG Nerf bars fix that problem and are a direct, perfect fit! RPM Nerf bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes rigidity while absorbing additional impact energy anything less than RPM would have Crumpled under! RPM Nerf bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed with our limited Lifetime warranty against breakage. Tech notes: RPM Nerf bars are stock replacement parts, sold in pairs and work with all stock Traxxas chassis running Traxxas #5833, #5833A and #5833G Nerf bars.

Features

  • Designed to increase durability
  • Replaces weaker stock components, check for full parts compatibility
  • Made by RPM R/C products, a United States based company where resources are sourced from American producers
  • Stock Replacement for Traxxas #5833, #5833A and #5833G nerf bars
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRPAA

Item Dimensions: 6 x 1 x 3 inches (15.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 1.15 x 3 x 6.5 inches (2.9 x 7.6 x 16.5 cm)

First Available: 2017-01-01

Amazon Price: $5.73 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Front&Rear Aluminum Suspension Arms 3655 for RC Traxxas 1/10 Slash 4x4 4WD

 Ean: 8414796431450   |    PartNumber: CSLA007NB   |   Asin: B07X27D8MR

This is the Front&Rear Aluminum Suspension A Arms for 1/10 1/10 Slash 4x4 4WD / 1/10 Rustler 4x4 4WD/Stampede 4x4 / Stampede 4X4 VXL / Rally / XO-1 RC Car



FEATURES

Replacement of Parts# 3655X

CNC machined for precision.Increased strength and precision.Easy upgrade from the original part






Specification

Color: Dark Blue

Material: Aluminum Alloy

Weight: 150g






PACKAGE INCLUDE:

4x Aluminum Suspension Arms (L/R);

6x Short Pins

4x Long Pins

4x M3 Screws

Features

  • Compatible with:Traxxas 1/10 Slash 4x4 4WD / 1/10 Rustler 4x4 4WD/Stampede 4x4 / Stampede 4X4 VXL / Rally / XO-1 RC Car
  • CNC machined for precision.Increased strength and precision.Easy upgrade from the original part
  • Replacement of Parts# 3655X
  • Pack of 4 (As the picture showed),Accessories Included.
  • See more on Amazon...

Brand: ACTruck   |   Manufacturer: ACTruck

Item Dimensions: 0.59 x 1.18 x 2.76 inches (1.5 x 3.0 x 7.0 cm)   |   Package Dimensions: 0.59 x 3.94 x 5.91 inches (1.5 x 10.0 x 15.0 cm)

Amazon Price: $24.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Atomik RC Alloy Rear Shock Tower, Grey fits the Traxxas 1/10 Slash and Other Traxxas Models - Replaces Traxxas Part 3638

Model: 4130GM   |    Mpn: 4130GM   |    Ean: 0885948208769   |    PartNumber: 4130GM   |   Asin: B0033EB98W

Give your Traxxas 1/10 Slash the gift of alloy greatness with this Alloy Rear Shock Tower, Grey. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash, available now in blue, red, and grey/gunmetal.

Replaces Traxxas Part No. 3638. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.

Fits the Following Traxxas Models: Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Bandit, Traxxas 1/10 Monster Jam Series.

Features

  • Precision CNC Machined for Factory Spec Fitment.
  • Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.
  • Atomik RC Offers a Full Line of Hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal
  • Also Fits: Traxxas 1/10 Stampede, 1/10 Rustler, 1/10 Ford SVT Raptor, 1/10 Dakar, 1/10 Bandit
  • Easy Upgrade from Original Part. Replaces Traxxas Part 3638.
  • See more on Amazon...

Brand: Atomik RC   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.6 x 3.5 x 5.5 inches (1.5 x 8.9 x 14.0 cm)

Amazon Price: $16.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: Atomik RC warrants all products to be free of material and workmanship defects for a period of 30 days from date of purchase for all electronic components and 90 days for all non-electronic components. If a component is defective or was not correctly made, Venom will, at its sole discretion, repair or replace the item free of charge. This is a non-transferable warranty and does not cover normal wear and tear, crash or water damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

RPM 80249 Traxxas Slash 2WD, Nitro Slash, E-Stampede 2WD and E-Rustler

Model: RPM80249   |    Mpn: RPM80249   |    Ean: 0672415802496   |    PartNumber: RPM80249   |   Asin: B010AWZWQE

RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse.

Features

  • Fits all versions of the Traxxas Slash 2wd, Nitro Slash, electric Stampede 2wd & electric Rustler
  • nearly 25% lighter than stock
  • Red Colored
  • See more on Amazon...

Brand: RPM   |   Manufacturer: RPM

Item Dimensions: 5.63 x 0.38 x 3.06 inches (14.3 x 1.0 x 7.8 cm)   |   Package Dimensions: 0.47 x 1.97 x 5.12 inches (1.2 x 5.0 x 13.0 cm)

Amazon Price: $7.02 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.95

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

RPM 80599 A-Arms-Red Traxxas Slash 2WD Rear

Model: RPM80599   |    Mpn: RPM80599   |    Ean: 0672415805992   |    PartNumber: RPM80599   |   Asin: B010AX0MLI

RPM Slash 2wd rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

Features

  • Specifically designed for the Slash 2wd exclusively
  • Not for use on the Nitro Slash
  • Red Colored
  • See more on Amazon...

Brand: RPM   |   Manufacturer: RPM

Item Dimensions: 6 x 0.38 x 4.06 inches (15.2 x 1.0 x 10.3 cm)   |   Package Dimensions: 0.39 x 3.46 x 4.33 inches (1.0 x 8.8 x 11.0 cm)

Amazon Price: $7.64 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

RPM 80242 Front A-Arms Black Monster Jam/Rustler/Stampede/Slash (2) Black

Model: RPM80242   |    Mpn: 80242   |    Ean: 0762988642947   |    PartNumber: 80242   |   Asin: B000JQSNL8

Features

  • For use on the E-Rustler, Stampede, Monster Jam, and Slash
  • Tech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.79 x 2 x 4 inches (2.0 x 5.1 x 10.2 cm)   |   Package Dimensions: 0.1 x 4.1 x 7.4 inches (0.3 x 10.4 x 18.8 cm)

Amazon Price: $7.14 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.96

Warranty: Our warranty policy is simple and easy. If you manage to break the product under normal usage you can return for replacement or refund.If you don't like the parts at whatever reason, you can return for replacement or refund within one month, the package of the returned parts should be in well condition.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

RPM 80592 Rear A-Arms Black Slash Black

Model: RPM80592   |    Mpn: 80592   |    Ean: 0885300977425   |    PartNumber: 80592   |   Asin: B001J2SJ1U

Features

  • For the Slash 2WD
  • Tech Notes: RPM Slash 2wd Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.48 x 3.7 x 4 inches (1.2 x 9.4 x 10.2 cm)   |   Package Dimensions: 0.4 x 4.7 x 6.7 inches (1.0 x 11.9 x 17.0 cm)

Amazon Price: $7.78 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: Our warranty policy is simple and easy. If you manage to break the product under normal usage you can return for replacement or refund.If you don't like the parts at whatever reason, you can return for replacement or refund within one month, the package of the returned parts should be in well condition.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Tamiya 51353 D Parts Suspension Arm TB03

Model: TAMC4957   |    Mpn: 51353   |    Ean: 4950344513536   |    PartNumber: 51353   |   Asin: B001Q0RYSY

TAMIYA 51353 D Parts Suspension Arm TB03

Features

  • FEATURES: Plastic construciton Black in color;INCLUDES: Two D-1 parts Two D-2 parts;REQUIRES: Installation on vehicle
  • See more on Amazon...

Brand: Tamiya   |   Manufacturer: Hobbico

Item Dimensions: 0.63 x 3.31 x 7.64 inches (1.6 x 8.4 x 19.4 cm)   |   Package Dimensions: 0.63 x 3.31 x 7.64 inches (1.6 x 8.4 x 19.4 cm)

Amazon Price: $8.79 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.25

Warranty: Contact Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

4-Pack Aluminum Front & Rear Suspension A-Arms & Tie Bar Replacement of 2555 3631 2532 for Traxxas 1/10 Slash 2WD RC Car Upgrade Parts Hop Ups

 Ean: 8414771688206   |    PartNumber: 2555-3631-2532R   |   Asin: B07W8WN11F

Customer Service:

If you have any questions during the use and installation process, please contact us, we will solve it for you at the fastest speed.

URCMax's Aluminum Suspension A-Arms&Tie Bar






FEATURE:

Compatible with:Traxxas 1/10 Slash 2WD

Replacement of Parts# 2555 3631 2532

SPECIFICATIONS:

Material: Aluminum Alloy

Color: Red






YOU WILL RECEIVE:

Four (4) Aluminum Suspension Arms (L/R)

ONE (1) Aluminum Tie Bar

Two (2) Long Pins

Six (6) Screw Pins

Six (6) E-clip

Features

  • These A-Arms Will fit : 1/10 Traxxas Slash 2wd
  • What You Get:2 pair of arms included for front and rear of vehicle 1pcs Tie Bar,Accessories Included.
  • Precision anodized (Red),Aluminum material, lightweight and durable
  • Replacement of 2555 3631 2532
  • Made by URCMax,Top-Quality Materials & Superb Craftsmanship
  • See more on Amazon...

Brand: URCMax   |   Manufacturer: URCMax

Item Dimensions: 0.47 x 1.97 x 3.94 inches (1.2 x 5.0 x 10.0 cm)   |   Package Dimensions: 0.6 x 4 x 5.8 inches (1.5 x 10.2 x 14.7 cm)

Amazon Price: $31.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Traxxas 8929A Suspension Arms, Upper, White (Left Or Right, Front Or Rear) (2)

 Ean: 0020334892959   |    PartNumber: 8929A   |   Asin: B081LKKPRT

This is a Replacement upper suspension arm for the MAXX edition Traxxas truck. Left or right, front or rear.

Features

  • Traxxas Maxx Suspension arms, upper, White (left or right, front or rear) (2) (TRA8929A)
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 0.2 x 4 x 2 inches (0.5 x 10.2 x 5.1 cm)   |   

Amazon Price: $7.00 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Traxxas 8940 Suspension Screw Pin Set, Front Or Rear (Hardened Steel)

 Ean: 0020334894007   |    PartNumber: 8940   |   Asin: B081LNFRV3

This is the replacement Front or Rear Suspension Screw Pin Set for the Traxxas Maxx.

Features:
Hardened Steel
Front or Rear application

Includes:

(4) 4x18mm
(2) 4x38mm
(2) 4x33mm
(2) 4x43mm

Features

  • Traxxas 8940 - Suspension Screw Pin Set, Maxx
  • Features: Hardened Steel Front or Rear application
  • Includes: (4) 4x18mm (2) 4x38mm (2) 4x33mm (2) 4x43mm
  • Specs:
  • Part number(s) included (in factory packaging): 8940
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Amazon Price: $6.00 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Traxxas 8929 Suspension Arms, Upper, Black (Left Or Right, Front Or Rear) (2)

 Ean: 0020334892904   |    PartNumber: 8929   |   Asin: B081LNKRXN

This is a Replacement upper suspension arm for the MAXX edition Traxxas truck. Left or right, front or rear.

Features

  • Traxxas Maxx Suspension arms, upper, Black (left or right, front or rear) (2) (TRA8929)
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 0.2 x 4 x 2 inches (0.5 x 10.2 x 5.1 cm)   |   

Amazon Price: $7.00 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Traxxas 8941 Suspension Pins, Lower, Inner (Front Or Rear), 4x64mm (2)

 Ean: 0020334894106   |    PartNumber: 8941   |   Asin: B081LNCKV4

This is the replacement Hardened Steel Lower Inner Suspension Pins for the Traxxas Maxx.

Features:
Hardened Steel
Front or Rear Application

Includes:

(2) Suspension Pins

Specs:
4x64mm

This product is compatible with the following Model(s): Maxx 89076-4

Features

  • Traxxas 8941 - Lower Inner Suspension Pins, Hardened Steel, Maxx
  • Features: Hardened Steel Front or Rear Application
  • Includes: (2) Suspension Pins
  • Specs: 4x64mm
  • Part number(s) included (in factory packaging): 8941
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Amazon Price: $3.50 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

ARRMA Front Lower Suspension Arms 100mm (1 Pair), ARA330606

 Ean: 5052127034630   |    PartNumber: ARA330606   |   Asin: B07XDB5YS2

ARRMA Front Lower Suspension Arms 100mm (1 Pair), ARA330606

Features

Brand: ARRMA   |   Manufacturer: ARRMA

Item Dimensions: 0.7 x 4 x 5.5 inches (1.8 x 10.2 x 14.0 cm)   |   Package Dimensions: 1.78 x 10.16 x 13.97 inches (4.5 x 25.8 x 35.5 cm)

Amazon Price: $9.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Kirby PUPUPU FRIENDS Pen Pouch Dedede

Model: -   |    Mpn: -   |    Ean: 4905330124081   |    PartNumber: -   |   Asin: B07N2SML6N

Size (ui_button_Size) W20 x D1 x H8cm

Features

Brand: Sanei Boeki   |   Manufacturer: Sanei Boeki

Package Dimensions: 0.87 x 4.17 x 8.43 inches (2.2 x 10.6 x 21.4 cm)

Amazon Price: $37.27 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 4-5 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Woyisisi Durable Aluminum Alloy Rear Lower Arm for RC HPI 1/8 WR8 Flux Ken Block Gymkhana(Orange)

 PartNumber: Woyisisif1nku5igd4-02   |   Asin: B07WFPPP99

Specifications:
Condition: 100% Brand New
Material: Aluminum Alloy
Optional Color: Blue, Orange, Red
Fitness: for HPI Electric 1/8 WR8 FLUX Ken Block Gymkhana
Weight: Approx. 45g

Package List:
2 x Rear Lower Arm
4 x Dowel
8 x E-Buckle

Features

  • High-quality aluminum alloy material processing to ensure the service life of product.
  • CNC precision machining makes it perfect in size and stable in performance.
  • Anodic oxidation treatment surface, with beautiful appearance.
  • It is easy to install and disassemble.
  • Perfect upgrade accessories, sturdy and durable, not easy to deform.
  • See more on Amazon...

Brand: Woyisisi   |   Manufacturer: Woyisisi

Amazon Price: $9.59 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $9.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

Eve.Ruan GPM Racing Aluminum Front Knuckle Arms for ARRMA 1/8 KRATON 6S RC Car, for Stabilize The CVD, Front Upper and Lower Arms, Assist The Steering (red)

 Ean: 0719655429233   |   Asin: B07XWWXXH8


Package include: 1 Set Front Knuckle Arms
Weight: 92g

Features

  • Product major function & usage:Stabilize the CVD, front upper and lower arms, assist the steering
  • 3D outlook appearance and the complete linkage design is better than original design for better stabilization
  • Material upgrade to aluminum 6061T6 plus POM collar, minimize the space to achieve higher accuracy between bearings and knuckle arms
  • Easy to plug and play and more sensitive to the steering and turning, POM has high flexibility to secure the bearing from falling out
  • This powerful Kraton needs these knuckle arms to become more sensitive when turning with more accurate turning angle
  • See more on Amazon...

Brand: Eve.Ruan   |   Manufacturer: Eve.Ruan

Amazon Price: $45.99 | as of 12/12/2019(10:50pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $55.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Traxxas 8929A Suspension Arms, Upper, White (Left Or Right, Front Or Rear) (2)
  2. Traxxas 8940 Suspension Screw Pin Set, Front Or Rear (Hardened Steel)
  3. Traxxas 8929 Suspension Arms, Upper, Black (Left Or Right, Front Or Rear) (2)
  4. Traxxas 8941 Suspension Pins, Lower, Inner (Front Or Rear), 4x64mm (2)
  5. ARRMA Front Lower Suspension Arms 100mm (1 Pair), ARA330606
  6. Kirby PUPUPU FRIENDS Pen Pouch Dedede
  7. Woyisisi Durable Aluminum Alloy Rear Lower Arm for RC HPI 1/8 WR8 Flux Ken Block Gymkhana(Orange)
  8. Eve.Ruan GPM Racing Aluminum Front Knuckle Arms for ARRMA 1/8 KRATON 6S RC Car, for Stabilize The CV...

Most Wished For

  1. 4-Pack Aluminum Front & Rear Suspension A-Arms & Tie Bar Replacement of 2555 3631 2532 for T...
  2. RPM 81482 Front Upper and Lower A-Arms for Arrma Kraton, Talion and Outcast, Black
  3. Hobbypark 108019 108819 Aluminum Front Lower Arms (L/R) Blue for RC 1/10 Redcat Volcano Epx (PRO) Ex...
  4. Hobbypark 108821 108021 Aluminum Rear Lower Arms (L/R) Blue for 1/10 Redcat Volcano Epx (PRO) Exceed...
  5. RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
  6. RPM RPM - 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2) (Pack of 34)
  7. Traxxas 2640 Suspension Pins with E-Clips, 44mm (pair)
  8. Hobbypark Front / Rear Aluminum Suspension Arms (L/R) Replace 3655X Red for 1/10 Traxxas Slash 4x4 U...
  9. RPM 73862 Nerf Bars for The Traxxas LCG Slash 2WD, Black
  10. Front&Rear Aluminum Suspension Arms 3655 for RC Traxxas 1/10 Slash 4x4 4WD

Most Gifted

  1. Hobbypark Front / Rear Aluminum Suspension Arms (L/R) Replace 3655X Red for 1/10 Traxxas Slash 4x4 U...
  2. Atomik RC Alloy Rear Shock Tower, Grey fits the Traxxas 1/10 Slash and Other Traxxas Models - Replac...
  3. RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
  4. RPM 80249 Traxxas Slash 2WD, Nitro Slash, E-Stampede 2WD and E-Rustler
  5. RPM 80599 A-Arms-Red Traxxas Slash 2WD Rear
  6. RPM 80242 Front A-Arms Black Monster Jam/Rustler/Stampede/Slash (2) Black
  7. RPM 80592 Rear A-Arms Black Slash Black
  8. RPM 73862 Nerf Bars for The Traxxas LCG Slash 2WD, Black
  9. Tamiya 51353 D Parts Suspension Arm TB03
  10. 4-Pack Aluminum Front & Rear Suspension A-Arms & Tie Bar Replacement of 2555 3631 2532 for T...

Top Selling

  1. RPM 81482 Front Upper and Lower A-Arms for Arrma Kraton, Talion and Outcast, Black
  2. RPM 80705 Front/Rear A-Arms Blue Slash/Stampede 4x4 Blue
  3. RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
  4. Hobbypark 108019 108819 Aluminum Front Lower Arms (L/R) Blue for RC 1/10 Redcat Volcano Epx (PRO) Ex...
  5. RPM Front A-Arm 2WD Slash, Rustler, Stampede, Nitro Slash, Green
  6. RPM RPM - 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2) (Pack of 34)
  7. RPM 80595 Rear A-Arms Blue Slash Blue
  8. RPM 80709 Traxxas Slash 4x4, Stampede 4x4 and Rally Front Or Rear A-Arms-Red
  9. Redcat Racing 08005 Plastic Front Lower Suspension Arm, 2Piece
  10. RPM Adjustable Height Body Mounts Traxxas Slash 4x4, Black



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Baby & Toddler Toys


Action Figures & Vehicles


Pretend Play


Games


Learning & Education Toys


Novelty & Gag Toys


Sports & Outdoor Play


Ride-On, Biking And Skating Toys


Kids Electronics & Video Games


Remote Controlled Vehicles


Model Building


Arts & Crafts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.