Peachtree Woodworking Supply - Buying Guide

Bestselling from Peachtree Woodworking Supply on Amazon

1. Peachtree Woodworking Supply 10 Pack of White Non Scratch Non-Woven Pads for Cleaning/Polishing and ...
2. Peachtree Woodworking Supply 10 Foot Long Dust Collection Power Tool Hose Kit with 5 Fittings/Attach...
3. Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2 in Diameter by 2-7/8 Wide For Veneers L...
4. Fulton Woodworking Tools 4" x 20' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collectio...
5. 2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal fo...
6. Peachtree Woodworking Supply Cleaning Eraser Stick Small 1-1/2" x 1-1/2" x 7-7/8" Made from Natural ...
7. Peachtree Woodworking Supply 4 inch to 2-1/2 inch Reducer with 4 inch Flexible Cuff Rubber Coupler F...
8. Sili Glue Roller with Sili Glue Tray for Arts Crafts Woodworking and Larger Glue Up Projects
9. Peachtree Woodworking Supply Extendable Heavy Duty Floor and Wall Roller for Laminate, LVP, Veneer, ...
10. Peachtree Woodworking Supply Safety Woodworking Push Block and Stick Package 5 Piece Set In Orange C...

Features

• We ve all used our scouring pads for multiple projects and chores around the house. From doing the dishes to cleaning up fibers on the next great woodworking project, these type of pads do the trick. This white light duty non-woven pad is the perfect addition to any kitchen, workshop or DIY garage shop! You can use it to clean surfaces, polish woodworking projects, apply finishes and a whole lot more!
• The White Non-Woven Hand Pads measure approximately 6 inches wide by 9 inches in length. The pad can be cut using a pair of household scissors to create just the right size and shape for your project or application. Each pad is made of polyester fibers in a dense textured, non-woven pattern, bonded with a sturdy adhesive. Each pad is approximately .375 inches thick.
• This is an extra soft pad that can be used on many different delicate surfaces like porcelain sinks, tubs and toilet bowls. Also works well for cleaning rubber, vinyl, ceramic tile, dishes, stainless steel, metal furniture and fixtures around the house.
• The Light Duty Hand Pad is constructed of polyester fibers along with synthetic adhesives that will not be notably affected by water, cleaners or natural wood finishes. The polyester fiber used in our pads comes from 100% post consumer and industrial recycled waste product.
• To prolong the life of the pad it should be rinsed thoroughly after every use regardless of material or surface it was used with or on.
• See more on Amazon...

Features

• The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
• The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage
• The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!
• A tapered rubber adaptor with a ribbed end is included and had a I.D. The outer diameter tapers from 1-9/32 down to 1-1/4 . The ribbed end ensures a snug fit. The other rubber adapter with a ribbed end has a 1-1/4 I.D. and a 1-5/8 O.D. Both fittings are threaded on the opposite for a perfect fit on to the included hose
• Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each rubber adaptors with ribbed ends and 1 each Plug-in Adaptor for shop vacuums that will allow you to connect the hose to most commercial or residential workshop vacuum ports. IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS before placing an order.
• See more on Amazon...

Features

• Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface.
• When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won t be even enough and can t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion.
• A full 12 long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8 thick so it will stand up to the rigorous chore of applying pressure to your sheet goods.
• The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sections of comfortable rubber grips for extended use and less hand fatigue. The bottom of the handle forms the J to attach the heavy duty rubber roller without getting in the way of your rolling process.
• Using the Fulton J-Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. Perfect for working many of those project types around the house or in your woodworking shop. The roller measures approximately 2-7/8 wide.
• See more on Amazon...

Features

• The PVC hose is wrapped around a steel wire that can easily be grounded.
• Tight bending radius allows you to maneuver the hose anywhere in your shop.
• This heavy duty hose will not collapse under pressure from your dust collector.
• Hose is clear so you can see directly inside to spot any kind of obstruction.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• Sanding most anything is a chore that we all don t typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear!
• The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition; Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials.
• It works almost like an old fashioned pencil eraser. As you rub or slide the stick across an abrasive surface the stick quickly loosens and removes foreign materials. Your abrasives will be brought back to life to continue sanding. If you have power sanders like belt sanders you can simply hold the stick up against the sanding belt while the power is on and watch the belt be cleaned right before your eyes!
• Clean various items around the house, workshop or in the garage. The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer all the while it can also be used on disc sanders, drum sanders, rubber bottom shoes (not plastic), skateboard grip tape, grip tape and a whole lot more!
• The natural rubber cleaning eraser stick also works exceptionally well on skateboard grip surfaces which tend to get dirty rather quickly. Once clean, the skateboard surface is almost as good as new and keeps its grip a whole lot longer. Similar to skateboard grip surfaces, abrasive or grip tape that s used on floor areas that can get slippery can be easily cleaned using the eraser stick.
• See more on Amazon...

Features

• Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4 port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y s, T s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.
• Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most professional and us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
• Two stainless steel hose clamps help provide a tight seal on the 4 inch end and keep the reducer from falling out. These clamps fit neatly into the slots around the coupler so there is no slipping when tightened. No more busting your knuckles. Each clamp is equipped with a blue turn key mechanism to make tightening and loosening the clamp super easy.
• The rigid rubber coupler seals tightly around the reducer for excellent airflow. Easy to install and easy to remove. As with most all other dust collection fittings, it s always a good idea to have extra on hand for when you need it. It s always better to have it and not need it than it is to need it and not have it.
• Made from high quality ABS plastic for extended periods of use, the reducer fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. Dimensions may slightly vary due to slight variations in the manufacturing process.
• See more on Amazon...

Features

• Designed to work together, the Sili Glue Roller and the Sili Glue Tray help you make quick work of larger glue up projects. It doesn t matter if you re an arts and crafts hobbyist, a professional woodworker or model making enthusiast, this combo pack will be a useful tool when you need to perform larger glue ups on your projects.
• The Sili Glue Roller is made with angled grooves which allow the glue to be worked into the roller and help retain the glue on the roller. The recessed grooves also keep the glue from dripping too quickly and gives you ample time to apply the glue to your project regardless of size. The grooves also allow just enough glue flow-through to keep things rolling with minimal resistance. This also helps to keep the roller from gliding or skating across the wood when applying the glue.
• The roller itself is a has no protruding metal on one side to allow for flush passes on your glue ups. This means you can apply glue right up against another board and have no worries about marring that work piece. This also makes it easier to glue right up to the edge of your project.
• Made entirely of silicone rubber, the Sili tray resembles a paint roller tray but on a smaller scale and it is more flexible to easily dispense the adhesives back into the container after you are done. The tray has been designed for use with the Sili Glue Roller (not included and sold separately), however it can be used with any glue brush or applicator that fit within its dimensions.
• Both the Sili Roller and Tray are of course made from silicone rubber which means they are super easy to clean! You can simply run them under warm water and quickly work the glue off with your fingers. You can also let the glue dry overnight and then crack and peel the glue off revealing a clean, ready to go surface underneath. Either way, it s quick and virtually painless to clean the Sili Roller and Tray!
• See more on Amazon...

Features

• The Extendable Heavy Duty Segmented Roller provides excellent leverage while applying pressure to linoleum, carpets, tile, wall coverings, laminates, large veneer projects and more! Projects that were once difficult are now a cinch with this rugged tool with its ergonomic, heavy duty leverage handle and rubber rollers.
• The heavy duty cast leverage handle allows you lean into to apply as much pressure as needed and will take virtually all of your weight behind it. This helps you press and roll out your material as efficiently and as quickly as possible. Perfect for flooring projects
• The extendable handle has a black, rubber handle bar style grip for comfort. With a simple counter clockwise twist, the secondary handle can be extended to a full 27 long! Talk about leverage! This makes it perfect for many different types of applications. Once you loosen the handle, simply pull it out too length up to 27 and then simply twist the handle back clockwise to lock it in. Now you will be able to apply pressure to most any project large or small.
• We designed the 3 rollers to be set in a segmented fashion so the pressure action of the rollers will be evenly and directly distributed behind each roller producing excellent results when pressure is applied. Some press rollers use a single roller type of tool which tends to produce inconsistent and uneven results.
• Each of the segmented rollers are made of a solid non marring rubber material so your work surface is safe from being marked or damaged when using it. Each roller is approx. 1-1/2 in diameter and 2-7/32 long for a total of 7-1/2 wide rolling surface.
• See more on Amazon...

Features

• This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
• Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
• The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
• Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
• The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
• 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
• The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
• Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it s essentially just holding its spot once it is secured.
• The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8 x 3/4 miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
• The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
• See more on Amazon...

Features

• When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. Using a piece of hand held sandpaper can also be somewhat dangerous. Our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe. The 9 inch long handle also helps keep your hands out of harms way.
• The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of your project. Unlike most other bowl sander head assembly s, our bowl sander has two steel bearings to provide you with super smooth mandrel rotation while sanding on your lathe. This also helps to reduce the chance of marking your wood since the sander will be rotating without hanging up or catching like so many other brands do.
• It s all about the pressure, or more like, its all about the light pressure and consistent technique. When sanding with the 2 inch bowl sander, applying too much pressure will likely produce some unsightly results. By applying light pressure and consistently moving the sander, you will achieve the results you are looking for and in a fraction of the time it typically takes when hand sanding your project.
• The head assembly is also capable of accepting other size sanders as long as the mandrel/shank size is 1/4 inch in diameter. Please be aware however that some manufacturers say 1/4 inch in diameter when in actuality the diameter is either smaller or slightly larger. 3 brass bushings of varying depths are included to make fitting sanders with different length mandrels/shanks easy.
• We have included the most common diameter sanding head with the bowl sander. This sander head is made from a foam material that gives just enough to provide you with wonderful looking results each time you sand your projects. This 2 head size works well on most bowl turning projects since it can work with larger or smaller work pieces. Also included 10 ea. 80 grit, 10 ea. 120 grit, 10 ea. 150 grit and 10 ea. 220 grit hook and loop sanding discs.
• See more on Amazon...

Features

• Replace your factory cloth dust collection bags with these convenient and disposable heavy duty plastic bags. Typically when using dust collectors we want to keep the dust inside the bottom bags where it belongs. The problem is, with cloth bags, they tend to kick up a lot of dust and essentially create a dust storm when we need to remove them to clean them out. Plastic bags solve this issue.
• A question we get asked a lot is, why not just use a store bought trash or heavy duty bags for my dust collector? The simple answer is that standard bags you find at a big box store are generally very thin and flimsy in comparison and not made for dry dust. This makes them vulnerable to tearing and ripping which makes for a complete mess for us to clean up.
• Not only that, thinner bags tend to dry out a lot quicker than thicker bags. Our plastic dust collector bags are a thicker plastic material that hold up and won t tear like thinner, standard household bags. Designed to be used on the bottom of single stage dust collector units, these plastic dust collection bags are ideal for capturing larger dust particles and debris that is created when working with dust collectors.
• Another key reason these bags work so well for dust collection is because they are clear. This means you can see when the bag is full or getting close to full. When you see the transparent bag has been filled up, simply remove it from the dust collector and throw it away. Replace the bag with a new plastic dust collection bag and you re ready to go.
• Each of these plastic bags measures approximately 43 long by 31 wide (20 in diameter). Please check the diameter of your dust collector drum before deciding if these bags will work for you. The 5 mil thick bags are designed for use with dust collectors that are use for collecting wood dust and debris.
• See more on Amazon...

Features

• Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
• Or you can reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1 wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
• They also work on most any type of material and can be cut to any length needed.
• Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner.
• Each roll is made from hard to find J-weight cloth backed sandpaper. Available in 150x, 240x, 320x, 400x, & 600x. The center opening of each roll is approximately 1-1/2.
• See more on Amazon...

Features

• Finally an assortment of colored veneers in various wood types that are ideal for marquetry, inlay, woodworking projects and more! 15 square feet of both domestic and exotic wood types ranging from mahogany, redwood burl, chestnut to Purple Heart, teak, zebra wood and everything in between! No variety pack is the same and each pack comes with different wood types, grains and dyed colors! This makes the veneer variety pack ideal for marquetry and inlay woodworking!
• Each veneer is approximately 1/42 thick which makes the veneer easy to work with and comfortable to cut to exact shapes and sizes. From building a fine guitar and adding wonderful and colorful artwork to making a family heirloom to be passed down from generation to generation, using these veneers will help you achieve the final look you want! Even for those of us just starting out, this pack of veneers is an excellent choice without breaking the bank.
• These veneers are all produced and processed in the USA! The veneers range in size from approximately 5 to 7.5 wide and each are approximately 8 tall. Each pack has 15 total square feet of assorted veneers that can be used for woodworking, arts, crafts, furniture accents, repair or restoration work, cabinets, boxes, doors, drawers, inlays, marquetry and a whole lot more!
• The veneers included in this pack are raw wood, which means there is no adhesive or paper backing on the veneer sheets. You must have or provide your own preferred adhesive in order to properly place and secure the veneer to your desired surface.
• Veneer sheet quantity, size, wood type, grain and overall appearance will vary from pack to pack. No two variety packs are the same. Please keep in mind that the variety pack you receive may or may not include the exact colors, wood types, size and grain patterns shown in the images on this listing.
• See more on Amazon...

Features

• Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project
• Let S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time
• Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock
• Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6 Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2 S (2 X 4 Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12 To 18 For Best Results.
• See more on Amazon...

Features

• Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
• The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
• The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
• The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
• The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
• See more on Amazon...

Features

• Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
• Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
• Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
• Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
• This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
• See more on Amazon...

Features

• No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
• Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
• Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
• How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
• The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
• See more on Amazon...

Features

• No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
• Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
• Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
• How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
• The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
• See more on Amazon...

Features

• When creating or adding to our dust collection system, there are a great many details we need to keep in mind. Typically, we will have one dust collector connected to multiple machines around the shop. While this kind of works, it can work much better if you could turn off the airflow to all the machines except for the one being used at the moment. That s where blastgates step in. Simply open or close the blastgate to allow or block airflow to a specific machine
• Ideally, the way blastgates should work, is that you should have a blastgate setup for every machine in your workshop. When you close all the blastgates to all the other machines, you increase the airflow or suction to the machine being used. This means that you should see less dust on the machine that is being used since it is getting maximum airflow or suction. This also helps reduce the amount of wear and tear on your dust collector.
• This blastgate features tapered ports on both sides of the blastgate. The tapered ports allow hoses (sold separately) to be slipped on and clamped with hose clamps (sold separately) with ease. Tapered ports will also accept some tapered fittings.
• The sliding gate has a built-in stop so it will not slide out when fully opened. The gate acts like a shut off valve to keep air from flowing in a given direction when it is closed. When opened, air will pass through allowing dust to be collected as needed.
• The Fulton blastgate is made from a durable ABS plastic material for everyday workshop use. With an easy to open and close sliding gate you ll be able to quickly open and close hose lines to concentrate airflow to where you need, when you need it and for maximum airflow.
• See more on Amazon...

Features

• When you need to cut a narrow piece of stock on a table saw we know that it can be a little dicey or intimidating. Many of us try to cut the piece we need on the outside of the blade rather than dealing with narrow cuts. However, cutting narrow stock is sometimes unavoidable. In this case it is recommended that you use a safety device such as a push stick to help feed the stock through. Push sticks also help you safely push a workpiece, keeping it flat against a table top while it is being cut.
• Designed to keep your hands away from blades or cutter, this push stick is an essential tool for your safety. The push stick prevents your hand from getting to close to the cutters or blades on table saws, router tables, shapers and jointers. The push stick has a 90 degree notch on the end with a relief circle to accept the 90 degree corner of your stock. The notched end is designed to be at the ideal angle to the handle and allows for even pressure while pushing stock through the blade.
• One of the handiest features of this push stick is that we have embedded two magnets into the handle. We have done this because many of us have a hard time keeping track of our tools once we are done with them. The embedded magnets remedy this issue by allowing you to place the push stick directly on metal surfaces like the side of a table saw cabinet. We have embedded not just one, but two separate magnets on to the handle to keep the push stick from sliding or inadvertently rotating.
• The push stick end has been intentionally colored a bright safety orange for the simple reason of being able to see the stick at all times when in use. This ensures that you can see exactly where you are placing the push stick in relation to the blade or cutter. The bright color also makes the push stick easy to locate when it stored away.
• The Magnetic Handle Push Stick measures approximately 12 long and has an ergonomically designed handle that delivers more precise control and a comfortable grip. The push stick also has a hole drilled into the handle just in case you don t have any metal surfaces to place the push stick. The hole allows you to hang the push stick just a like the rest of your tools . Includes 2 Safety Push Sticks.
• See more on Amazon...

Features

• The Adjustable Replacement Tool Rest Sharpening Jig will allow you to locate all the basic sharpening positions with your bench grinder (grinder not included). The unique miter slide tool holder design allows the jig to be used more or less as a stone, which easily guides your blades, turning tools and chisels. Solid aluminum construction provides you with a smooth sliding, side to side action when sharpening.
• The sharpening jig works with most power or hand grinders that has or had a tool rest. It is the ideal replacement for the factory tool rest that comes with many bench grinders. The jig offers much more flexibility in terms of what you can get done than with the standard factory tool rest. The plate is offset for short chisels, such as Japanese or western butt chisels.
• The Sharpening jig can be used with 6 or 8 bench grinders and on many belt sanders/grinders. It quickly and easily mounts directly to the bench in front of the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base.
• Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests don t move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1 wide. The Jig also now includes internal lock washer for even more stability!
• The unique ratcheting handles lock the adjustable rest solidly in position and can be moved out of the way after locking to keep from accidentally bumping them. You can easily move the tool rest from one grinder wheel to another or quickly remove it from the bench when not needed for grinding. Some assembly required. The bench top wood mounting screws are included.
• See more on Amazon...

Features

• Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them.
• Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!
• Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4 s, 6 x 6 s, PVC, Resin s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects.
• Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent for woodworkers, carpenters, DIYer s and more!
• Each high speed steel bit is made in the auger spiral style. The reason for this is to help clear build up and chips as you drill. When using any drill bit and especially longer bits like these, you must always clear the bit by pulling it back out of the hole to discharge the build up and chips. This helps reduce friction and the overall stress on the bit producing a much smoother hole and overall drilling experience.
• See more on Amazon...

Features

• If you have ever struggled to keep your lightweight cone filters from falling into paint cans or containers when straining paint or finish, then you know how valuable a holder or stand can be. Even more so, the right strainer stand makes all the difference. Having a stand that works with smaller quart sizes as well as full size gallons is an absolute must.
• This uniquely designed stand is the perfect solution for painters and finishers! The stand keeps your strainer neatly perched above the paint can or container so you can have both hands free. This allows you to use both hands on the can so you can pour your paint of finish into the new container with complete control.
• The lightweight but sturdy rod steel stand has a large 9 x 8 open base for great stability and the base is just the right size to fit a full size gallon paint can into it. The base sits underneath the 4 round upper opening. The top opening makes it easy to align your can or container for straining your paints and finishes.
• Made from rod steel, the stand is perfect for handling paint straining cones and won t allow the cones to fall through the opening when pouring. Perfect for professionals and beginners, the paint strainer stand can be used in woodworking, automotive, contractor or even DIY applications.
• A unique feature of the Fulton Paint Strainer Stand is that it is two separate pieces. It is easily assembled with the included 4 set screw sleeve. This makes the stand super easy to assemble or dis-assemble for quick and convenient storage. Paint strainer cones are NOT included.
• See more on Amazon...

Features

• When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.
• The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.
• To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.
• The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from 0 in the middle of the ruler, the scale is in 32nds.
• The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12 and 24 sizes, which are both sold separately.
• See more on Amazon...

Features

• Finish your next woodworking project and make it pop! The 22 Piece Applicator Bundles has everything you need to apply your finish and make your project look great!
• This convenient Applicator Bundle includes 10 white non-woven applicator pads for applying wood finishes to your project. The white non-woven pads are perfect for this since they are a very high grit, smooth abrasive that won t scratch or leave unsightly marks behind. The pads help you properly work your chosen wood finish into the wood.
• The 2 terry cloth towels are the ideal towels to use for buffing off your wood finish if needed once it is dry. Simply fold the towel into a comfortable size for you and your project and buff off the wood finish going with the grain of your wood for an exceptional sheen and luster.
• 10 stirring sticks are also included with this pack for stirring your wood finish when needed. The sticks can also be used to dab more wood finish on to your project as needed or on to the applicator pad. Each stick measures approximately 6 inches long and is made from wood
• The Applicator Bundle can be used with a large variety of wood finishes including oil, cutting board oil, linseed oil, tung oil, wax, wood butter, furniture butter and a whole lot more!
• See more on Amazon...

Features

• When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.
• The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.
• To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.
• The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from 0 in the middle of the ruler, the scale is in 32nds.
• The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12 and 24 sizes, which are both sold separately.
• See more on Amazon...