Frontpage > Electronics > Music Equipment > Bass Guitar Necks

Best Bass Guitar Necks - Buying Guide

Last Updated: 03/25/2019

Share on


  #1

Fender F Neckplate Chrome

Model: 0991448100   |    Mpn: 0991448100   |    Ean: 0717669173456   |    PartNumber: 0991448100   |   Asin: B000WN4J9S

'70s 'F' Style Neck Plate Chrome. Genuine Fender '70s 'F' Style Neck Plate will renew your axe and keep it stock.

Features

  • '70s 'F' Style Neck Plate Chrome
  • Genuine Fender '70s 'F' Style Neck Plate will renew your axe and keep it stock
  • See more on Amazon...

Brand: Fender   |   Manufacturer: Fender Musical Instruments Corp.

Item Dimensions: 3.54 x 7.48 x 11.42 inches (9.0 x 19.0 x 29.0 cm)   |   Package Dimensions: 0.2 x 3.8 x 5.6 inches (0.5 x 9.7 x 14.2 cm)

First Available: 2010-07-26

Warranty: No warranty.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Blank, Set of 3

Model: #AN2132   |    Mpn: AN2132   |    PartNumber: AN2132   |   Asin: B01LW2Z16X

Full contact, precisely tapered

To change the angle of a bolt-on neck, players and repair shops have used shims for years. We've seen everything from matchbook covers to guitar picks stuck in neck joints.

Those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide :

"This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body."

Dan creates tapered shims that cover the entire heel of the neck. With these Bolt-On Shims, that work is done for you. Attention repair shops: Making a quality shim takes time. Keep these on hand for a quick turnaround on this common repair.

These shaped shims fit most neck pockets with a rounded heel.

This set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck:

0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on Fender and many other solidbody guitars. 1-degree taper is great for basses with a post mounted bridge. Dimensions: 2-1/2" x 3-7/8" (63.50mm x 98.43mm)

Taper specs (approximate):

0.25-degree tapers from 0.030" to 0.019" (0.76mm to .048mm)

Features

  • Used to change the angle of a bolt-on bass neck
  • Made of solid maple to match the guitar neck
  • Better than the typical homemade guitar pick neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
  • Keep these on hand for a quick turnaround on this common repair
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
  • See more on Amazon...

Brand: StewMac   |   Manufacturer: StewMac

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Electric Guitar Neck 24 Frets Maple Red Mark Dots Maple Guitar Neck for Electric Guitars (Red)

Model: Tbestrhmy0e9d6w-02   |    Mpn: Tbestrhmy0e9d6w-02   |    Ean: 0736077651608   |    PartNumber: Tbestrhmy0e9d6w-02   |   Asin: B07MDG8BZZ




Specifications
Weight: Approx. 710g / 25.0oz
Neck Material: Maple
Fretboard Material: Rosewood
Position Mark Dots: Shell, Red
Width at Nut: Approx. 4.3cm / 1.69in
Heel width: Approx.5.6cm / 2.2in
Neck Depth(with Fretboard): Approx. 2.2cm / 0.87in
Heel Depth(with Fretboard):Approx. 2.8cm / 1.1in
Frets: 24 frets
Peg holes diameter: Approx. 10mm / 0.39in
From Nut to the 12th Fret: Approx. 32cm / 12.6in
Guitar neck total length: Approx. 69cm / 27.17in




Features

  • 24 frets electric guitar replacement parts.
  • DIY electric guitar, spare parts for repairers and guitarists.
  • The distance from nut to the 12th fret is about 32cm, which is only suitable for 24 frets electric guitars with the distance from nut to saddle about 64cm.
  • Maple wood, the sound is brighter.
  • There is also inlay mark dots on the side, which make it easy to tell the fret you want to play.
  • See more on Amazon...

Brand: Tbest   |   Manufacturer: Tbest

Item Dimensions: 1.06 x 3.15 x 27.17 inches (2.7 x 8.0 x 69.0 cm)   |   

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Luvay Guitar Neck Rest for Bass, Ukulele, Violin etc. - Support Caul, Luthier Setup Maintenance Station Tool for String Instrument

Model: Luvay000033   |    Mpn: 10795734   |    PartNumber: 10795734   |   Asin: B071ZW87K1

Works perfectly with all electric guitars and most basses, works great as a clamping caul when polishing, repairing, string & fret job etc.


Features

  • Made of cork Wood, Size: 12" x 3" x 1"
  • Protect neck of Guitar, Bass, basses, ukulele... stop them from Moving
  • Support the Neck when Repair and Cleaning Guitar and Bass
  • Portable tool that allows quick configuration of a workbench
  • See more on Amazon...

Brand: LUVAY   |   Manufacturer: LUVAY

Item Dimensions: 1 x 3 x 12 inches (2.5 x 7.6 x 30.5 cm)   |   Package Dimensions: 0.98 x 3.7 x 11.61 inches (2.5 x 9.4 x 29.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3

Model: #AN2131   |    Mpn: AN2131   |    PartNumber: AN2131   |   Asin: B01LVXSE9T

Full contact, precisely tapered

To change the angle of a bolt-on neck, players and repair shops have used shims for years. We've seen everything from matchbook covers to guitar picks stuck in neck joints.

Those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide :

"This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body."

Dan creates tapered shims that cover the entire heel of the neck. With these Bolt-On Shims, that work is done for you. Attention repair shops: Making a quality shim takes time. Keep these on hand for a quick turnaround on this common repair.

These shaped shims fit most neck pockets with a rounded heel.

This set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck:

0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on Fender and many other solidbody guitars. 1-degree taper is great for basses with a post mounted bridge. Dimensions: 2-1/2" x 3-7/8" (63.50mm x 98.43mm)

Taper specs (approximate):

0.25-degree tapers from 0.030" to 0.019" (0.76mm to .048mm)

0.5-degree tapers from 0.028" to 0.008" (0.71mm to .020mm)

1-degree tapers from 0.060" to 0.010" (1.52mm to .025mm)

Features

  • Used to change the angle of a bolt-on bass neck
  • Made of solid maple to match the guitar neck
  • Better than the typical homemade guitar pick neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck
  • Keep these on hand for a quick turnaround on this common repair
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper
  • See more on Amazon...

Brand: StewMac   |   Manufacturer: StewMac

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Kmise Z3712 TOP Quality Maple 21 Fret Bass Neck for Fender Bass-JAZZ Bass Clear Satin

Model: Z3712   |    Mpn: Z3712   |    Ean: 0634458509503   |    PartNumber: Z3712   |   Asin: B00SSY4MNQ

100% new high quality and testing is fine Item 100% like the picture shown TOP Quality Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin Features: 100% brand new and unused Clear satin finish lacquer smooth finish rosewood strip back Made Of CA Maple Wood of Neck and Fingerboard Neck Wood: Maple(there may be some grain of the maple on the neck it is normal) Radian:400 Heel Width:63mm Peg holes: 4 x 18mm Diameter Nut Width:38mm Black Inlay Dots and black side dots Finish: Clear Satin Polishing Frets: 21 Nickel/Silver Frets Heel Depth: 20mm / 26mm with Fingerboard back with rosewood strip inlaid Fit For :Jazz Fender Bass Truss Rod Adjustment: Headstock (Truss rod has been installed already) Package include: 1x TOP Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin

Features

  • TOP Quality Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin
  • Made Of CA Maple Wood of Neck and Fingerboard
  • Wood: Maple(there may be some grain of the maple on the neck it is normal)
  • See more on Amazon...

Brand: Kmise   |   Manufacturer: Kmise

Item Dimensions: 1.95 x 2.73 x 26.52 inches (5.0 x 6.9 x 67.4 cm)   |   Package Dimensions: 2 x 5 x 35 inches (5.1 x 12.7 x 88.9 cm)

Warranty: Warranty on parts.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

2Pcs Golden 4 Holes Curved Neckplate Electric Guitar Neck Plate for Fender Strat Stratocaster Tele Telecaster with 8 Fixed Screws

 Ean: 0675234799503   |   Asin: B07G4WNNNV

Item 100% like the picture shown Chrome finish 4-bolt neck plate for guitar. Deluxe style for cutaway heel guitars. Screw holes are spaced 27mm on the left, 50mm on the right, and 38mm across. Package Included: 2 x Chrome Neck Plate,8 Fixed Screws

Features

  • Made of Zinc Alloy,suitable for guitar neck fixed,useful for guitar protecting,Processed with qualified materials,has a long service life
  • black triangle plate for guitar neck fixed with 8 fixed mounting screws,Black guitar neck plate used to strengthen guitar stability and enrich guitar life long
  • 4-hole guitar neck plate with more breathing space for guitar,suitable for guitar neck fixed and protection
  • Great for attaching necks to guitars,Good for guitar parts replacement,Deluxe style for cutaway heel guitars
  • If you have any questions about the item,please contact us,we will help you solved all problems
  • See more on Amazon...

Brand: Jinhui Direct   |   Manufacturer: Shenzhenshi Jitianhuidianzishangwuyouxiangongsi

Package Dimensions: 0.55 x 3.54 x 3.94 inches (1.4 x 9.0 x 10.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Fender Jaguar Neck

Model: 0996102921   |    Mpn: 0996102921   |    Ean: 0885978421145   |    PartNumber: 0996102921   |   Asin: B00DY837JG

Genuine Fender Precision Bass guitar maple neck features a comfortable "modern C" profile and 9.5"-radius rosewood or maple fingerboard with 20 medium jumbo frets. Also includes standard truss rod and pre-slotted synthetic bone nut. Tinted satin urethane finish on back for smooth feel, with gloss finish on maple fingerboard and headstock face. Crafted at Fender s Ensenada, Mexico, manufacturing facility.

Features

  • Maple w/Maple Fingerboard
  • Modern C Shape and 9.5 radius
  • 20 Medium-Jumbo Frets
  • Standard truss rod
  • Limited Warranty Included
  • See more on Amazon...

Brand: Fender   |   Manufacturer: Fender Musical Instruments Corp.

Item Dimensions: 3.5 x 7 x 39.5 inches (8.9 x 17.8 x 100.3 cm)   |   Package Dimensions: 3.4 x 7 x 37.6 inches (8.6 x 17.8 x 95.5 cm)

Warranty: 1-year.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Kmise Electric Bass Guitar Neck For Fender Jazz Bass Guitar Parts Replacement (MI0450)

Model: MI0450   |    Mpn: MI0450-KUS   |    Ean: 0634458679923   |    PartNumber: MI0450-KUS   |   Asin: B012ZVTY62

This guitar neck is made of fine maple with clear finish, very smooth. The fingerboard comes with black dots and 21 fret wires. Truss rod installed headstock requires final shaping for that personal touch. Holes has been pre-drilled for tuner installation. Great replacement for Guitar Bass luthier or replace your broken, dirty or old 4 string bass neck. Sure to make your guitar look new again!

Neck Wood: Maple

Width at Nut: Approx. 38mm Heel Width: Approx. 64mm Heel Depth: Approx. 21mm / 27mm with fingerboard Side Dots: Black Inlay: Black dot Headmachince Hole Diameter: Approx. 18mm Frets: 21 silver frets Adjustable truss rod at the headstock, pre slotted nut, dot position markers, side dot markers and nickel silver frets are installed. Finish: Clear Package Included: 1 x 4 string bass neck

Features

  • This item is sent from China,it will take 4-14 days from China to US!
  • Neck Wood: Maple
  • Frets: 21 silver frets
  • Finish: Clear
  • See more on Amazon...

Brand: Kmise   |   Manufacturer: Shenzhen Lotmusic Technologe Co.,Ltd

Item Dimensions: 1.16 x 2.34 x 27.54 inches (2.9 x 5.9 x 70.0 cm)   |   Package Dimensions: 2.01 x 5 x 34.02 inches (5.1 x 12.7 x 86.4 cm)

Warranty: The quality of guitar neck is really very great.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

ACE-HK Bass Guitar Maple Neck, with Maple Fretboard, 1 Pc

 Ean: 0712324331363   |   Asin: B00XYKIPA0

100% NEW.
High quality, dried properly.
Suitable for luthier.
Suitable for BASS Guitar.
Wood Material: Maple neck, Maple Fretboard.
100% shown as picture.
Package: 1 Pc (with frets and dots install).

Features

  • The item is shipped from China.The delivery time to US is about 7 to 15 BUSINESS days.
  • High quality, dried properly.
  • Suitable for luthier.
  • Suitable for BASS Guitar.
  • Maple Neck, Maple Fretboard, with frets and dots install.
  • See more on Amazon...

Brand: ACE-HK

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Diamond Guitar neck nut fret file Pillow groove trowel Slot Filing Luthier Maintenance Tools

 Ean: 0665644861136   |   Asin: B07FF6SBG7

Specifications:
Material: diamond
Product size: 185 x 15 x 5mm/7.28 x 0.59 x 0.20"
Product weight: 104g


Package inckuded:
3 x Files

Features

  • Diamond metarial,Durable and efficient nut-slotting files
  • Tapered and V shped cutting edge fret nut file for guitar, bass, mandolin, banjo etc
  • Nut Fret Crowning Slot Filing Repair tool
  • Lightweigh and friendly design,portable to carry
  • One pack of three pieces,three colors
  • See more on Amazon...

Brand: MKChung   |   Manufacturer: MKChung

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Maple Guitar Neck, 22 Fret Electric Guitar Neck Blank for Bolt-on Neck Parts Maple Fingerboard Replacement

Model: Alomejor3ci9gaym1f   |    Mpn: Alomejor3ci9gaym1f   |    Ean: 0757686525814   |    PartNumber: Alomejor3ci9gaym1f   |   Asin: B07JNQ7Z6W

Features:

10mm head machine peg holes for tuner installation. Adjustable truss rod has been installed at the headstock. Maple wood makes the sound more Loud and clear. A replacement part for ST electric guitar. With inlay dots on side, it is convenient to distinguish the corresponding fret.


Specifications:

Item: Guitar Neck

Material: Maple Wood

Fret: 22

Peg Holes Diametre: 10 mm / 0.4 inch

Position Mark Dots: Black Acrylic

Colour: Yellow




Fretboard Length: Approx. 48 cm / 18.75 in

Neck Depth: Approx. 1.8 cm / 0.7 in (with Fretboard 2.3 cm / 0.9 in)

Heel Depth: Approx. 2.0 cm / 0.8 in (with Fretboard 2.6 cm / 1.0 in)

Size: Approx. 67.5 * 5.5 * 2.5 cm / 26.6 * 2.2 * 1.0 inch

Weight: Approx. 748 g



Package Included:

1 * Guitar Neck

Features

  • 10mm head machine peg holes for tuner installation.
  • Adjustable truss rod has been installed at the headstock.
  • Maple wood makes the sound more Loud and clear.
  • A replacement part for ST electric guitar.
  • With inlay dots on side, it is convenient to distinguish the corresponding fret.
  • See more on Amazon...

Brand: Alomejor   |   Manufacturer: Alomejor

Item Dimensions: 1.18 x 3.54 x 26.57 inches (3.0 x 9.0 x 67.5 cm)   |   

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

2 Pack Guitar Metal Neck Plates with Plastic Mat for Strat Tele Style Electric Guitar Replacement, Chrome

 Ean: 0756171813061   |   Asin: B07PH994R1

The plastic backing is part of the whole thing to keep it from digging into the body so much. That's why it's a bit thinner. But with the plastic is fine and solid. If you don't want the plastic backing you need to get the vintage kind that is a bit thicker and heavier. This socket plate fits most perfectly for Stratocaster or Telecaster project, mex or american.Each back plate with four-screw neck mounting, if you are replacing the neck with a Fender, make sure to get Fender size screws.

Specification:
New Chromium Neck Plate with Screws fit for Strat Tele Guitar
Material:Metal and Plastic
Colour: Chrome plated
Size(L x W):approx. 64mm x 51mm / 2.5"x2"
Mounting Hole Distance(L x W):approx. 51mm x 38mm / 2"x1.49"

Package Included:
2 x Neck Joint plates
2 x plastic Back plates
8 x mounting screws

Features

  • This neckplate is very well made, chrome plated steel. Usually fit for most FD Fender stra- tele guitars and basses Jazz, please help to check the measurements before purchase.
  • Neck Plate Size(L x W): approx.64mm x 51mm / 2.5x 2, Mounting Hole Distance(L x W):approx. 51mm x 38mm / 2x 1.49
  • Mirror like plate for protecting the finish on your guitar body when you screw the neck on.
  • The black rubber mat that helps protect the back of your guitar and adds a bit of give to help stop over tightening of the screws.
  • Package Including: 2 x Neck Joint plates, 2 x plastic back plates, 8 x mounting screws, If you are replacing the neck with a Fender, make sure to get Fender size screws.
  • See more on Amazon...

Brand: Oneflysky   |   Manufacturer: Oneflysky

Package Dimensions: 0.39 x 1.18 x 1.97 inches (1.0 x 3.0 x 5.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

2Pcs Black 4 Holes Curved Neckplate Electric Guitar Neck Plate for Fender Strat Stratocaster Tele Telecaster with 8 Fixed Screws

 Ean: 0675234799497   |   Asin: B07G59M7DW

Item 100% like the picture shown Chrome finish 4-bolt neck plate for guitar. Deluxe style for cutaway heel guitars. Screw holes are spaced 27mm on the left, 50mm on the right, and 38mm across. Package Included: 2 x Chrome Neck Plate,8 Fixed Screws

Features

  • Made of Zinc Alloy,suitable for guitar neck fixed,useful for guitar protecting,Processed with qualified materials,has a long service life
  • black triangle plate for guitar neck fixed with 8 fixed mounting screws,Black guitar neck plate used to strengthen guitar stability and enrich guitar life long
  • 4-hole guitar neck plate with more breathing space for guitar,suitable for guitar neck fixed and protection
  • Great for attaching necks to guitars,Good for guitar parts replacement,Deluxe style for cutaway heel guitars
  • If you have any questions about the item,please contact us,we will help you solved all problems
  • See more on Amazon...

Brand: Jinhui Direct   |   Manufacturer: Shenzhenshi Jitianhuidianzishangwuyouxiangongsi

Package Dimensions: 0.43 x 2.72 x 4.02 inches (1.1 x 6.9 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Mighty Mite MM2907 P-Bass Replacement Neck with Maple Fingerboard

Model: MM2907   |    Mpn: MM2907   |    Ean: 0716570000240   |    PartNumber: MM2907   |   Asin: B003HGQTKO

The MM2907 P-Bass Replacement neck is constructed of maple and an maple fingerboard fitted with 20 medium frets. This neck has been given an oil-based finish. The Mighty Mite MM2907 P-Bass replacement neck is constructed of maple and a maple fingerboard fitted with 20 medium frets. This bass neck has been given an oil-based finish. Since the 1970's Mighty Mite has manufactured custom and replacement bass parts for luthiers, repairmen, and guitarists who can't wait to hot-rod their Fender Precision bass or Precision-style bass.

Features

  • Type: Fender P-bass
  • Neck: maple
  • Fingerboard: maple
  • Fingerboard radius: 9.5
  • Number of frets: 20
  • See more on Amazon...

Brand: Mighty Mite   |   Manufacturer: Mighty Mite

Item Dimensions: 3.5 x 4.25 x 34.75 inches (8.9 x 10.8 x 88.3 cm)   |   Package Dimensions: 3.5 x 4.25 x 34.75 inches (8.9 x 10.8 x 88.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Rosewood Neck replacement

Model: MI0421   |    Mpn: MI0421   |    Ean: 0634458647175   |    PartNumber: MI0421   |   Asin: B01175WG26

Item 100% like the picture shown

TOP Quality Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Yellow Satin Features: 100% brand new and unused yellow satin finish lacquer smooth finish rosewood strip back Made Of CA Maple Wood of Neck and Fingerboard made of rosewood (there may be some grain of the maple on the neck it is normal) Radian 400 Heel Width : 63mm Pegholes: 4 x 18mm Diameter Nut Width: 38mm White Inlay Dots and White side dots Finish: Yellow Satin Polishing Frets: 21 Nickel/Silver Frets Heel Depth: 20mm / 26mm with Fingerboard back with rosewood strip inlaid Fit For :Jazz Fender Bass Truss Rod Adjustment: Headstock (Truss rod has been installed already) Package include: 1x TOP Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Yellow Satin





Features

Brand: Kmise   |   Manufacturer: Shenzhen Lotmusic Technologe Co.,Ltd

Item Dimensions: 1.16 x 2.34 x 27.54 inches (2.9 x 5.9 x 70.0 cm)   |   Package Dimensions: 2.52 x 5 x 34.02 inches (6.4 x 12.7 x 86.4 cm)

Warranty: The quality of guitar neck is really very great.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Fender Jaguar Neck

Model: 0996202921   |    Mpn: 0996202921   |    Ean: 0885978421121   |    PartNumber: 0996202921   |   Asin: B00DV4GOXY

Genuine Fender Jazz Bass guitar maple neck features a comfortable "modern C" profile and 9.5"-radius rosewood or maple fingerboard with 20 medium jumbo frets. Also includes standard truss rod and pre-slotted synthetic bone nut. Tinted satin urethane finish on back for smooth feel, with gloss finish on maple fingerboard and headstock face. Crafted at Fender s Ensenada, Mexico, manufacturing facility.

Features

  • Maple w/Maple Fingerboard
  • Modern C Shape and 9.5 radius
  • 20 Medium-Jumbo Frets
  • Standard truss rod
  • Limited Warranty Included
  • See more on Amazon...

Brand: Fender   |   Manufacturer: Fender Musical Instruments Corp.

Item Dimensions: 3.5 x 7 x 39.5 inches (8.9 x 17.8 x 100.3 cm)   |   Package Dimensions: 3.4 x 7 x 37.6 inches (8.6 x 17.8 x 95.5 cm)

Warranty: 1-year.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Kmise MI0085 Maple 21 Fret Bass Neck for Fender Bass-JAZZ Rosewood

Model: MI0085   |    Mpn: MI0085   |    Ean: 0634458806862   |    PartNumber: MI0085   |   Asin: B010LF45NG

100% new TOP Quality and testing is fine Item 100% like the picture shown TOP Quality Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin Features: 100% brand new and unused Clear satin finish lacquer smooth finish rosewood strip back Made Of CA Maple Wood of Neck and Fingerboard made of rosewood (there may be some grain of the maple on the neck it is normal) Radian:400 Heel Width:63mm Peg holes: 4 x 18mm Diameter Nut Width:38mm White Inlay Dots and White side dots Finish: Clear Satin Polishing Frets: 21 Nickel/Silver Frets Heel Depth: 20mm / 26mm with Fingerboard back with rosewood strip inlaid Fit For :Jazz Fender Bass Truss Rod Adjustment: Headstock (Truss rod has been installed already) Package include: 1x TOP Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin

Features

  • TOP Quality Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Clear Satin
  • Made Of CA Maple Wood of Neck and Fingerboard made of rosewood (there may be some grain of the maple on the neck it is normal)
  • Finish: Clear Satin Polishing
  • See more on Amazon...

Brand: Kmise   |   Manufacturer: Kmise

Item Dimensions: 2.43 x 3.2 x 26.5 inches (6.2 x 8.1 x 67.3 cm)   |   Package Dimensions: 2.01 x 5 x 34.49 inches (5.1 x 12.7 x 87.6 cm)

Warranty: Warranty on parts.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

BASS NECK EBONY FRETLESS

Model: WD-BEF   |    Mpn: WD-BEF   |    Ean: 0820454001466   |    PartNumber: WD-BEF   |   Asin: B0006ZRMWI

Replacement Jazz Bass neck 12 radius, double action truss rod, 1 1/2 in. nut, clear satin finish, fretless ebony fingerboard

Features

  • Fender Licensed Fretless Jazz Bass Guitar Neck
  • Neck: Maple, Fingerboard: Ebony, Adjustable truss rod at heel, White dot position markers on side only, Nut: 1 1/2 inch
  • Nut: 1 1/2 inch, Peg holes: 17.4 mm, Heel thickness: 25/32 inches, Heel width: 1 5/64 inches, Frets: 20 Fretless, Radius: 12 inch
  • Part Number: BEF
  • Available at Ant Hill Music!
  • See more on Amazon...

Brand: WD Music   |   Manufacturer: WD Music Products®

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Mighty Mite MM2919 P-Bass Replacement Neck with a Fretless Ebonol Fingerboard

Model: MM2919   |    Mpn: MM2919   |    Ean: 0716570000257   |    PartNumber: MM2919   |   Asin: B003HGJET2

The MM2919 P-Bass Replacement neck is constructed of maple and a fretless ebonol fingerboard that has been given an oil-based finish. The MM2919 P-Bass replacement neck is constructed of maple and a fretless ebonol fingerboard that has been given an oil-based finish. Since the 1970's Mighty Mite has manufactured custom and replacement bass parts for luthiers, repairmen, and guitarists who can't wait to hot-rod their Fender Precision bass or P-style bass.

Features

  • Type: fretless P-bass
  • Neck: maple
  • Fingerboard: ebonol
  • Fingerboard radius: 9.5
  • Number of frets: none
  • See more on Amazon...

Brand: Mighty Mite   |   Manufacturer: Mighty Mite

Item Dimensions: 3.25 x 4.25 x 35 inches (8.3 x 10.8 x 88.9 cm)   |   Package Dimensions: 3.25 x 4.25 x 35 inches (8.3 x 10.8 x 88.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

1PC durable two-way dual-path double adjustment tool steel guitar 425mm black

 Ean: 6941065587034   |   Asin: B07MSG1Q4K

Color: Black.
Material: Steel.
Size:445mm
Package Include: 1 x Truss Rod
dual way dual action adjustable truss rodsuitable for bass and guitar, easy to install and use.
1.Full length 425mm quality guitar truss rod dual action type, welding point in place.
2.Acts in both directions can increase curvature both ways.
3. Dual action adjustable rod with pull type compression for adjustment.
4.Strong steel construction to ensur maximum endurance for durable and long-lasting use.
5.Rod body is wrapped in black shrink wrap.

Features

  • Full length 425mm quality guitar truss rod dual action type, welding point in place
  • Acts in both directions can increase curvature both ways.
  • Dual action adjustable rod with pull type compression for adjustment.
  • Strong steel construction to ensur maximum endurance for durable and long-lasting use.
  • Rod body is wrapped in black shrink wrap.<
  • See more on Amazon...

Brand: NICELEC Two way truss rod   |   Manufacturer: NICELEC

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Electric Guitar Neck 24 Frets Maple Red Mark Dots Maple Guitar Neck for Electric Guitars (Red)
  2. 2 Pack Guitar Metal Neck Plates with Plastic Mat for Strat Tele Style Electric Guitar Replacement, C...
  3. 1PC durable two-way dual-path double adjustment tool steel guitar 425mm black

Most Wished For

  1. Fender F Neckplate Chrome
  2. Diamond Guitar neck nut fret file Pillow groove trowel Slot Filing Luthier Maintenance Tools
  3. StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3
  4. Maple Guitar Neck, 22 Fret Electric Guitar Neck Blank for Bolt-on Neck Parts Maple Fingerboard Repla...
  5. 2 Pack Guitar Metal Neck Plates with Plastic Mat for Strat Tele Style Electric Guitar Replacement, C...
  6. 2Pcs Black 4 Holes Curved Neckplate Electric Guitar Neck Plate for Fender Strat Stratocaster Tele Te...
  7. Kmise Z3712 TOP Quality Maple 21 Fret Bass Neck for Fender Bass-JAZZ Bass Clear Satin
  8. Mighty Mite MM2907 P-Bass Replacement Neck with Maple Fingerboard
  9. Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Rosewood Neck replacement
  10. Fender Jaguar Neck

Most Gifted

  1. Fender F Neckplate Chrome
  2. Kmise Z3712 TOP Quality Maple 21 Fret Bass Neck for Fender Bass-JAZZ Bass Clear Satin
  3. Maple 21 Fret Bass Neck For Fender Bass-JAZZ Bass Rosewood Neck replacement
  4. Kmise MI0085 Maple 21 Fret Bass Neck for Fender Bass-JAZZ Rosewood
  5. Fender Jaguar Neck
  6. Luvay Guitar Neck Rest for Bass, Ukulele, Violin etc. - Support Caul, Luthier Setup Maintenance Stat...
  7. Kmise Electric Bass Guitar Neck For Fender Jazz Bass Guitar Parts Replacement (MI0450)
  8. BASS NECK EBONY FRETLESS
  9. Mighty Mite MM2919 P-Bass Replacement Neck with a Fretless Ebonol Fingerboard

Top Selling

  1. Fender F Neckplate Chrome
  2. StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Blank, Set of 3
  3. Electric Guitar Neck 24 Frets Maple Red Mark Dots Maple Guitar Neck for Electric Guitars (Red)
  4. Luvay Guitar Neck Rest for Bass, Ukulele, Violin etc. - Support Caul, Luthier Setup Maintenance Stat...
  5. StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3
  6. Kmise Z3712 TOP Quality Maple 21 Fret Bass Neck for Fender Bass-JAZZ Bass Clear Satin
  7. 2Pcs Golden 4 Holes Curved Neckplate Electric Guitar Neck Plate for Fender Strat Stratocaster Tele T...
  8. Fender Jaguar Neck
  9. Kmise Electric Bass Guitar Neck For Fender Jazz Bass Guitar Parts Replacement (MI0450)
  10. ACE-HK Bass Guitar Maple Neck, with Maple Fretboard, 1 Pc



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.