Frontpage > Electronics > Photo > Telescope Accessories

Best Telescope Accessories - Buying Guide

Last Updated: 04/23/2019

Share on

Bestselling Telescope Accessories on Amazon

  1. Gosky Universal Cell Phone Adapter Mount - Compatible Binocular Monocular Spotting Scope Telescope M...
  2. Orion 05662 1.25-Inch 13 Percent Transmission Moon Filter (Black)
  3. Gosky Camera Shutter Wire Control for Smartphones and Smartphones Adapter Mount Such as Universal Ce...
  4. Celestron 81035 Basic Smartphone Adapter 1.25" Capture Your Discoveries, Black
  5. Celestron NexYZ 3-Axis Universal Smartphone Adapter
  6. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  7. SVBONY Red Laser Collimator for Newtonian Reflector Telescope Alignment 1.25'' 7 Bright Levels Tripl...
  8. Celestron Eyepiece and Filter Kit 14 Piece Telescope Accessory Set
  9. Celestron 93973 Skyportal Wifi Module, Black
  10. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)

  #1

Gosky Universal Cell Phone Adapter Mount - Compatible Binocular Monocular Spotting Scope Telescope Microscope-Fits almost all Smartphone on the Market -Record The Nature The World

Model: FBA_QHAP021   |    Mpn: FBA_QHAP021   |    Ean: 0703501415563   |    PartNumber: FBA_QHAP021   |   Asin: B013D2ULO6

Get Your Mobile Phone Into Video Camera and Image Capturer in Distant, Tiny World . Explore the nature of the world easily through your screen.

Are you still using a heavy phone adapter on your fancy eyepiece?
Are you still using a flimsy phone adapter for fear that it would slip out?
Are you bored with your complicated phone adapter, rotating the screws again and again, adjusting the position over and over?

Here comes our new generation smartphone adapter for optical devices.

Features:
Compliable with Binocular, monocular, telescope, microscope, spotting scope, night vision and most optical device. Fit eyepiece diameter 28mm-47mm. Not fit 2inch eyepieces.

Universal: With super large width range:54-90mm, Fit iphone 7plus,7, 6plus, 6,5s,5, Samsung Note , Sony, Sony Xperia Z and many other brands .

Adjustable clamping force -- The phone clamping part features adjustable locking mechanism with a steel bolt (not a spring).
This part can separately mounts on any standard tripod (1/4-20) .

Phone is well protected by High density EVA pads and nothing contacts your phone's screen.

Durable metal materials: Mainly made of Aluminum. Part made of high strength PA plastic. One time purchase for long-term use

Compact and Light Weight: 1.4"x3.2"x6.2"(LWH), 5.8oz.

Color: Black

Note1: Please make sure that the outer diameter of the eyepiece is between 28mm-47mm(1.102"-1.850").
1. There is also big type for eyepiece outer diameter from 32mm to 62mm which is compatiable with bigger spooting scopes, binoculars, small 2inch telescope eyepieces, etc (Search its ASIN: B01D5W0WES).
Note2: it doesn't work on a rifle scope because it mounts too close to the eyepiece.

Package Include:

1Xsmartphone adapter with instruction

Ps: ^_^ Lifetime warranty ^_^

Features

  • Get Your Mobile Phone Into Video Camera and Capturer Image in Distant, Tiny World . Explore the nature of the world easily through your screen
  • Universal: With super large width range: 54-90mm, Fit phone X, 8p, 8, 7plus,7,6plus, 6,5s,5, Samsung Note , Sony, Sony Xperia Z and many other brands
  • Compliable with microscope, telescope, binoculars, monocular, nightvision spotting scope eyepiece diameter 1.102inch to 1.850inch(28mm-47mm)
  • Once purchase for long use -Main Part Made of zinc alloy (More durable than Aluminum). Fully metal housing. And phone clamp made of high strength PA Plastic
  • 1. There is also big type for eyepiece outer diameter from 32mm to 62mm(1.26-2.44) which is compatiable with bigger spooting scopes, binoculars, small 2inch telescope eyepieces, etc (Choose big type in this listing). 2. You can add a Gosky Camera Shutter Wire Control for Smartphones. Then you remove any chance of vibration when take photos. (Search its ASIN: B06Y21NKC3).
  • See more on Amazon...

Brand: Gosky   |   Manufacturer: Gosky

Item Dimensions: 1.57 x 3.35 x 6.69 inches (4.0 x 8.5 x 17.0 cm)   |   Package Dimensions: 1.65 x 3.39 x 6.06 inches (4.2 x 8.6 x 15.4 cm)

First Available: 2018-08-15

Amazon Price: $18.88 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.88 | Used Price: $17.11

Warranty: Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Orion 05662 1.25-Inch 13 Percent Transmission Moon Filter (Black)

Model: 5662   |    Mpn: 5662   |    Ean: 5554442286959   |    PartNumber: 5662   |   Asin: B0000XMUWS

We are able to see the Moon at night thanks to sunlight reflecting off its rocky surface. When looking at the Moon through a telescope, bright reflected sunlight can produce significant glare. The Moon's disk, even at partial phases, is in fact so intensely bright with reflected sunlight that observing surface details can be challenging due to the overwhelming glare. This glare can be so bright that it washes out most of the interesting lunar features such as craters, rilles, mountains, and valleys. The considerable brightness also reduces contrast on our nearest neighbor in the solar system. To improve contrast and tone down glare easily, we recommend using a neutral-density 1.25 inch Orion 13 percent Transmission Moon Filter. This inexpensive accessory threads directly into a 1.25 inch eyepiece barrel and blocks 87 percent of the light gathered by the telescope, making for more comfortable lunar views exhibiting higher contrast. Once installed on a 1.25 inch telescope eyepiece, the Orion 13 percent Transmission Moon Filter will bring out considerably more lunar surface details thanks to the boosted contrast. Not only will more surface features and details pop out, but you can study them in greater comfort, thanks to Moon Filter reducing overall brightness without altering color. This neutral-density telescope eyepiece filter reduces irradiation, which is the distortion at the boundary between light and dark areas, such as along the lunar terminator. Using a Moon filter also helps conserve dark-adapted vision while viewing the lunar surface, especially when using big telescopes with 6 inches of aperture and larger. The Moon is one of the most interesting objects in the night sky to observe through a telescope. Its rugged surface is a feast for the eyes of amateur astronomers, with fascinating craters, mountainous highlands, and large, dark lunar seas formed by ancient volcanic activity.

Features

  • The Orion 1.25 inch 13 percent Transmission Moon Filter reduces glare so you can see more lunar detail and surface features with your telescope
  • Metal filter cell threads directly into the 1.25 inch barrel of your telescope eyepiece
  • Especially useful for large aperture telescopes through which the light of the Moon can be extremely overwhelming
  • Telescope eyepiece filter transmits only 13 percent of the incoming light, boosting contrast and ability to discern detail on the Moon
  • Perfectly neutral color will not alter the natural color of the Moon
  • See more on Amazon...

Brand: Orion   |   Manufacturer: Optronic Technologies, Inc

Item Dimensions: 0.25 x 1.25 x 1.25 inches (0.6 x 3.2 x 3.2 cm)   |   Package Dimensions: 0.9 x 3.1 x 3.2 inches (2.3 x 7.9 x 8.1 cm)

Amazon Price: $19.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99 | Used Price: $12.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Gosky Camera Shutter Wire Control for Smartphones and Smartphones Adapter Mount Such as Universal Cell Phone Adapter Mount- Remove Vibration -Get Better Photos

Model: 4331908701   |    Mpn: 4331908701   |    Ean: 0607994607316   |    PartNumber: 4331908701   |   Asin: B06Y21NKC3

Gosky Camera Shutter Wire Control for Smartphones for Cell Phone Adapter- Remove Vibration Get Better Photos

For the majority of devices there is no app download necessary, the remote will automatically pair with your device via Bluetooth. For Sony Xperia S, HTC One and X+ users, simply download the "Camera 360" app in the google play store to use the remote.

Features

  • Camera Shutter Wire Control for Smartphones for Gosky Cell Phone Adapter mount (ASIN: B013D2ULO6, B01D5W0WES) and other cell phone adapter.
  • Remove vibration. Take better qulity images.
  • 33.5 (850mm) long.
  • Wired jack size: Standard 3.5mm jack . Color: Elegant white
  • For the majority of devices such as an iPhone, iPad, iPod Touch, Samsung Galaxy S3, Galaxy S4, there is no app download necessary. For some brands such as Sony Xperia S, HTC One and X+ users, simply download the Camera 360 app in the google play store to use the remote.
  • See more on Amazon...

Brand: Gosky   |   Manufacturer: Gosky

Item Dimensions: 0.55 x 4.21 x 4.29 inches (1.4 x 10.7 x 10.9 cm)   |   Package Dimensions: 0.5 x 4 x 5 inches (1.3 x 10.2 x 12.7 cm)

Amazon Price: $7.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Celestron 81035 Basic Smartphone Adapter 1.25" Capture Your Discoveries, Black

Model: 81035   |    Mpn: 81035   |    Ean: 0705377300509   |    PartNumber: 81035   |   Asin: B07J2GGFQB

Capture and share your observations through just about any optic with this handy, simple-to-use smartphone Adapter. Whether you re snapping an Instagram-worthy image of the Moon, sharing your latest wildlife sightings with a binocular or spotting scope, or preserving lab specimens with your microscope, this versatile adapter handles it all with ease. No matter which optic you choose, installing and using the adapter is hassle-free. First, place your phone in the adapter. It s held securely in position with the help of tightening knobs that lock your phone in place. Next, align the phone S camera with the center of the eyepiece. Once you ve determined the perfect position, clamp the adapter over the top of the eyepiece and use the knobs to adjust for a secure fit. Note: some large and/or bulky phone cases (including folio style cases) may need to be removed for the phone to fit in the adapter. Once the phone is mounted over the eyepiece, you can capture still images or video, plus Access all the rest of your phone S features. You can even text your photos to a friend or post them on social media while your phone is still mounted in the adapter. To determine if your optic is compatible with the basic smartphone Adapter, Simply measure the outside diameter of your eyepiece. If it falls within the 29mm to 45mm range, you may use it with this adapter. The adapter does not work with Riflescopes.

Features

  • This smartphone Adapter connects your smartphone to a telescope, binocular, spotting scope, or microscope, so you can capture images and video through the eyepiece.
  • Works with most smartphone devices.
  • Compatible with Most telescope eyepieces and any eyepiece with an outside diameter measuring from 29mm to 45mm.
  • Simple to use! Place your phone in the adapter, center your phone's camera over the eyepiece, and use the knobs to secure the Adapter in place.
  • Durable, metal bodied adapter stands up to rigorous use in the field and harsh weather conditions.
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron Acquisition LLC

Item Dimensions: 1.5 x 4 x 7 inches (3.8 x 10.2 x 17.8 cm)   |   Package Dimensions: 1.61 x 3.23 x 6.3 inches (4.1 x 8.2 x 16.0 cm)

First Available: 2018-10-08

Amazon Price: $15.95 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.95 | Used Price: $11.21

Warranty: 2-year Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Celestron NexYZ 3-Axis Universal Smartphone Adapter

Model: 81055   |    Mpn: 81055   |    Ean: 0050234810555   |    PartNumber: 81055   |   Asin: B07D7V3B8M

NexYZ fits any eyepiece from 35 mm to 60 mm in diameter including telescopes with 1.25 and 2 eyepieces, spotting scopes, monoculars, and binoculars. NexYZ will also attach to microscopes with the addition of the included adapter ring, which takes the usable diameter down to 25 mm, the size of a standard microscope eyepiece. A strong spring and a threaded twist lock provide a two-level strong and secure grip on the optical instrument s eyepiece so you can image with confidence. NexYZ also accommodates a huge range of smartphones. The phone platform is fully adjustable and can fit any device usually with the case still on. Even larger phablets like the iPhone 8 Plus and latest Samsung Galaxy devices work perfectly. The secure platform stands up to the weight of these heavier devices with ease. If multiple people want to capture a shot through your optic, NexYZ s simple spring-loaded clamps make it easy to remove one device and replace it with another in seconds. NexYZ is the ideal solution for star parties and group bird walks where everyone wants their own shot of the action. Easy as X-Y-Z - What makes NexYZ different from other smartphone adapters? The three-axis adjustment. Most adapters rely on you placing your phone perfectly on the platform and only offer limited adjustment in two axes. But NexYZ gives you the power to place your phone on the platform, center it over the eyepiece with the X and Y knobs, and then move up or down over the eyepiece until you have the entire field of view in your shot. And even though this adjustment is ultra-precise, it s still quicker and easier than with other adapters. From start to finish, the process only takes about 30 seconds, including the time it takes to insert the phone into NexYZ, attach NexYZ to an eyepiece, start the camera app, and center the camera over the eyepiece using the knobs. If you switch phones, eyepieces, or optical instruments, you will need only slight adjustments to re-center the camera over the new eyepiece. You can also switch your image from portrait to landscape simply by turning the padded eyepiece clamp and readjusting the X, Y, and Z axis to realign your phone with the eyepiece. NOTE: NexYZ fits telescopes, spotting scopes, binoculars, monoculars, and microscopes. It will not fit riflescopes. NexYZ will work with most phone cases, but if you have an especially large phone case with built-in batteries or a folio style case, Celestron recommends removing it for optimal use. US and International Patents Pending

Features

  • NexYZ connects your smartphone to your telescope, spotting scope, binocular, monocular, and microscope so you can capture images and video through the eyepiece
  • Works with a wide range of mobile phone models, including all the latest devices from Samsung, Google, and Apple
  • Unlike other adapters, NexYZ features three directional knobs (X, Y, and Z axis) that perfectly align your phone's camera with the eyepiece in seconds so you are ready to snap the perfect image. In addition, you can make tension adjustments to keep the phone firmly in place
  • NexYZ stands up to rigorous field use thanks to its robust, durable construction with a metal frame and polymer body
  • NexYZ fits any eyepiece from 35 mm to 60 mm in diameter including telescopes with 1.25 and 2 eyepieces
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron Acquisition LLC

Item Dimensions: 8 x 6 x 5.25 inches (20.3 x 15.2 x 13.3 cm)   |   Package Dimensions: 5.51 x 6.69 x 8.11 inches (14.0 x 17.0 x 20.6 cm)

Amazon Price: $48.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $53.95 | Used Price: $45.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC

Model: 17HS08-1004S   |    Mpn: 17HS08-1004S   |    Ean: 4139052218043   |    PartNumber: 17HS08-1004S   |   Asin: B00PNEQ79Q

This is Short Height Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in). Electrical Specification: * Manufacturer Part Number: 17HS08-1004S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 13Ncm(18.4oz.in) * Rated Current/phase: 1.0A * Phase Resistance: 3.5ohms * Inductance: 4.5mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 20mm * Shaft Diameter: 5mm * Shaft Length: 20mm * D-cut Length: 16.5mm * Number of Leads: 4 * Lead Length: 400mm * Weight: 140g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Features

  • Short Height
  • 13Ncm(18.4oz.in) holding torque
  • NEMA 17 bipolar 1.65x1.65x0.79 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 1.0A & resistance 3.5ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 0.79 x 1.65 x 1.65 inches (2.0 x 4.2 x 4.2 cm)   |   Package Dimensions: 2.7 x 2.8 x 4.4 inches (6.9 x 7.1 x 11.2 cm)

Amazon Price: $10.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

SVBONY Red Laser Collimator for Newtonian Reflector Telescope Alignment 1.25'' 7 Bright Levels Triple Cemented Lens with 2" Adapter

Model: 4331908576   |    Mpn: FCAF9123A   |    Ean: 0631976576543   |    PartNumber: FCAF9123A   |   Asin: B00LX34ZH2

SVBONY newest 1.25" red laser collimator includes removable 2" adapter;the triple cemented lens to improve the stability of dot;
it's designed for accurate collimation of all Newtonian and SCT reflector telescopes
The laser collimator can get better image from the telescope;just insert it into the eyepiece holder;adjust laser beam level;
then adjust the telescope screw until the laser beam shoots into the target central
Designed for reflector telescope:
Fit for standard 1.25" and 2" diameter interface with a 2" adapter
Red laser with 7 brightness levels:
Adjustable brightness making it easy to use at night and during the day
User adjustable collimator:
3 collimation screws on the body to get the laser collimator aligned Triple cemented of Lens:
Improve the stability of red dot Much easier aligned process:
Watch the collimator from the mirror end of the scope and adjust the screws Quality durable metal materials:
Metal material for a long term use;included CR2032 lithium cell battery and use directly Output power:
Much safer for eyes The best working distance is 2m:
1-5m spots will not change of shape
Wavelength:635 to 655nm Package include:
1 x SVBONY laser collimator
1 x Adapter sleeve
1 x CR2032 battery
1 x English user manual Operation instructions:
Insert the laser collimator into the telescope eyepiece;then turn on the laser calibrator Light source brightness can be adjusted;total 7 adjustable Compared to professional machines more simple to use;more accurate test Warning:
Don't look directly into the laser beam;permanent eye damage may result Avoid prolonged skin exposure to laser rashes or burns may occur Remove the battery when not use

Features

  • SVBONY user adjustable laser collimator;allows anyone easily collimate 1.25'' and 2'' reflector telescopes;come with removable 2" adapter;built with metal material;make alignment no longer boring and time consuming
  • Easy to use;accurate collimation in a few minutes provide a more clearer image;no longer have to go back forth;just watch the collimator from the mirror end of the scope and adjust the screws
  • 7 brightness levels red laser beam;adjustable brightness;suit for different light conditions;amazing alignment in dark and day;so can get the better views possible from your reflector telescope
  • High quality solid metal body;for a long term use;CR2032 battery included and comes with a full set of instructions with a step by step procedure on how to properly align a relfecting telescope
  • Adjustable collimator;it has 3 collimation sealed screws on the body;if find it lose collimation; can manual calibrate it;lifetime warranty;we confidently promise lifetime warranty for every one bought from us
  • See more on Amazon...

Brand: SVBONY   |   Manufacturer: SVBONY

Item Dimensions: 2.36 x 3.54 x 8.46 inches (6.0 x 9.0 x 21.5 cm)   |   Package Dimensions: 2.4 x 3.6 x 8.7 inches (6.1 x 9.1 x 22.1 cm)

Amazon Price: $25.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

Warranty: Lifetime warranty;we confidently promise lifetime warranty for each one form us

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Celestron Eyepiece and Filter Kit 14 Piece Telescope Accessory Set

Model: 94303   |    Mpn: 94303   |    Ean: 0050234943031   |    PartNumber: 94303   |   Asin: B00006RH5I

The Celestron 1.25 Eyepiece and Filter Kit is a great way to expand the functionality and enjoyment of your telescope. Inside the metal, foam-lined carry case you ll find these accessories: 32 mm Plossl Eyepiece - 1.25 17 mm Plossl Eyepiece - 1.25 13 mm Plossl Eyepiece - 1.25 8 mm Plossl Eyepiece - 1.25 6 mm Plossl Eyepiece - 1.25 2X Barlow Lens - 1.25 #80A Blue Filter - 1.25 #58 Green Filter - 1.25 #56 Light Green Filter - 1.25 #25 Red Filter - 1.25 #21 Orange Filter - 1.25 #12 Yellow Filter - 1.25 Moon Filter - 1.25 Eyepieces - All five Plossl eyepieces can be used in any telescope with a 1.25 focuser. Each eyepiece features a four-element design with a 52 apparent field of view. The optics are fully multi-coated to improve light transmission and protect the optics. The 32 mm Plossl eyepiece offers a low power, wide field view in most telescopes, the 13 mm & 17 mm focal lengths are good medium-power oculars, and the 8 mm & 6 mm eyepieces provide high magnifications, great for the Moon and planets, especially when seeing conditions are good. 2X Barlow Lens - The included, and very versatile 2X Barlow doubles the magnification of any 1.25 eyepiece. Since this kit includes five (5) eyepieces, you will be able to use them with and without the Barlow, giving you a total of ten magnification options in all. Any other 1.25 eyepieces you already have will also work in this desirable accessory, giving you even more magnification choices. Remember, high magnifications do not always produce clear, sharp results, especially on evenings of poor or moderate seeing conditions. Experiment to find the magnifications that are best for your telescope on a particular night. Filters - Colored filters can be used to bring out certain details on a planet s surface or its cloud structure. All of the planetary filters included in the 1.25 Eyepiece & Accessory Kit, as well as the Moon filter, can be used on any 1.25 eyepiece with the proper filter threads, so they are very versatile. Just screw one onto your eyepiece of choice and slide it into the focuser. The Moon filter is one of the first accessories most new amateur astronomers buy, and for good reason! It helps block out a portion of the light the Moon sends into your eyepiece so that you can see details better. You can also try this filter on Venus; it blocks enough glare so you can observe the planet s phases more easily. Metal Case: The sturdy metal carry case has die-cut foam inside to protect and cushion your accessories. Store each one in its appointed place when not in use and you ll keep them looking and performing like new. The case is even large enough to carry a few extra accessories. Just pull out enough of the foam cubes to make a nest for your eyepiece, camera adapter, etc. A tight fit is better, so remove the least amount of foam possible before testing the fit. You can always remove more if you need to.

Features

  • Five superior grade Plossl eyepieces, all fully multi-coated for maximum contrast and resolution
  • 2x, 1.25-inch Barlow lens gives you a total of ten power combinations
  • Six colored eyepiece (planetary) filters.A tight fit is better, so remove the least amount of foam possible before testing the fit
  • 1.25-inch Moon filter provides maximum enjoyment of the moon especially during the brighter phases
  • Items in this kit are valued at over $700.00 if purchased separately
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 5.7 x 11.7 x 13.2 inches (14.5 x 29.7 x 33.5 cm)   |   Package Dimensions: 5.1 x 11.6 x 12.8 inches (13.0 x 29.5 x 32.5 cm)

Amazon Price: $115.55 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $115.55 | Used Price: $107.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Celestron 93973 Skyportal Wifi Module, Black

Model: 93973   |    Mpn: 93973   |    Ean: 0782941351518   |    PartNumber: 93973   |   Asin: B00OJ5Z2NM

Get WiFi Access to the Universe with the SkyPortal WiFi Module Celestron's SkyPortal WiFi Module turns your smartphone or tablet into your own personal planetarium and observatory! Simply plug the WiFi module into your telescope s Hand Control or AUX port and connect to its wireless signal with your device. Instantly, your device becomes a wireless hand controller for your telescope, guiding you through the alignment process and slewing to any celestial object with a simple tap. As SkyPortal Wifi Module slews your telescope to an object, you can listen to hundreds of included audio descriptions on your device, which explain the history, mythology, and key features of the most popular celestial objects.

Select Tonight s Best in the search menu and SkyPortal Wifi will display a list of the best objects to view based on your exact time and location. There s no need to input GPS coordinates or set the time and date SkyPortal WiFi takes this information directly from your device.

SkyPortal WiFi makes a great gift for telescope users of all ages and skill levels, from kids to advanced users. Take your family on a guided tour of the universe with SkyPortal WiFi! SkyPortal WiFi Module, Powered by Celestron SkyPortal Celestron s SkyPortal WiFi Module works with our brand new planetarium app, SkyPortal. Available free on the Apple App Store and Google Play, SkyPortal is your key to the universe with or without SkyPortal WiFi Module. Developed in collaboration with the experts at SkySafari, SkyPortal offers an intuitive user interface with a robust database of more than 100,000 celestial objects. You can even plan your observing session before you set up your telescope, viewing lunar transits and other notable events up to 100 years into the future. Compatibility Information SkyPortal WiFi is compatible with the following Celestron mounts:



SkyPortal WiFi Module Compatibility List Compatible :

Advanced VX -CGX-L Astro Fi -CPC, CPC DX CG-5 (with CG-5 Aux. splitter) -NexStar Evolution CGE -NexStar GT (2015 models and newer with Aux. splitter) CGE Pro -NexStar SE Series CGEM II -NexStar SLT CGEM, CGEM DX -SkyProdigy CGX -LCM

Non Compatible :

NexStar i Series - NexStar GPS Ultima 2000 - Early generation GoTo mounts (such as Compustar)

Features

  • Align and control your telescope wirelessly using your smartphone or tablet and Celestron's free SkyPortal app for iOS and Android devices.
  • Tap any celestial object you see in the sky to identify it instantly. Tap again and your telescope slews to that object, centering it perfectly in the eyepiece.
  • Explore 100,000+ objects in SkyPortal's database. While you observe, view astroimages and listen to audio descriptions for hundreds of the most popular objects including the planets, Orion Nebula, Hercules Globular Star Cluster, and more.
  • Sky Tour feature generates a list of all the best stars, galaxies and nebulae to view based on your exact time and location.
  • WiFi module is compatible with all current Celestron computerized telescopes and select older models. Unit does not require batteries or external power.
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 2.51 x 1.29 x 2 inches (6.4 x 3.3 x 5.1 cm)   |   Package Dimensions: 2.25 x 2.25 x 3.6 inches (5.7 x 5.7 x 9.1 cm)

Amazon Price: $99.95 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $99.95 | Used Price: $89.00

Warranty: 2 Year Limited Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)

Model: 4332013342   |    Mpn: 112108A2NKL5005   |    Ean: 8884161855783   |    PartNumber: 112108A2NKL5005   |   Asin: B00ODQM8KC

Description The item is a set of 10pcs professional and practical L293D step motor driver chips, which are mainly made of durable hard alloy and plastic materials, and features 16-pin design and channel channel capability up to 600mAh output current. With over-temperature protection and easy to use, it is really a wonderful L293D stepper motor drive for choice. Features - Color: mainly black. - Material: durable hard alloy and plastic. - 100% brand new and high quality L293D DIP 16-pin IC Stepper Motor Drive Controlle. - Channel Capability: 600mA output current / channel. - Peak Output Current: 1.2A / Channel (non repetitive). - Enable facility. - Over temperature protection. - Logical /0/ input voltage up to 1.5V (High noise immunity). - Internal clamp diodes. - Pin No: 16 pi. Absolute Maximum Ratings - Vs Supply voltage: 36V. - Vss Logic Supply Voltage: 36V. - Vi Input signals: 7V. - Ven Enable Voltage: 7V. - Io Peak Output Current (100 mu;s non repetitive): 1.2A. - Ptot Total Power Dissipation at Tpi: 90deg;C, 4W. - Tstg, Tj Storage and Junction temperature: -40deg;C to 150deg;C. -------------------------------------------------------- Package Including 10 * L293D DIP 16-pin IC Stepper Motor Drive Controlle (Black)

Features

  • Color: mainly black. Material: durable hard alloy and plastic.
  • L293D DIP 16-pin IC Stepper Motor Drivers Controllers.
  • Channel Capability: 600mA output current channel.
  • Peak Output Current: 1.2A Channel (non repetitive).
  • Enable facility. Over temperature protection. Pin No: 16 pins.
  • See more on Amazon...

Brand: Pixnor®   |   Manufacturer: PIXNOR

Item Dimensions: 0.91 x 1 x 1.31 inches (2.3 x 2.5 x 3.3 cm)   |   

Amazon Price: $8.39 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Celestron PowerSeeker 127EQ Telescope with Basic Smartphone Adapter 1.25" Capture Your Discoveries

Asin: B07K9CCHYT

Features

  • 3x Barlow Lens
  • German Equatorial Mount. Optical tube length is 20 inches
  • The smartphone Adapter connects your smartphone to your telescope, so you can capture images and video through the eyepiece.
  • Works with all smartphone devices.
  • See more on Amazon...

Brand: Celestron

Amazon Price: $145.78 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $145.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Celestron 93230 8 to 24mm 1.25 Zoom Eyepiece

Model: 93230   |    Mpn: 93230   |    Ean: 3609920123072   |    PartNumber: 93230   |   Asin: B0007UQNV8

The amazingly versatile Celestron 8 mm - 24 mm zoom eyepiece allows you to choose from a variety of magnifications in a flash! Simply grip the rubberized barrel and turn it slowly while looking through the eyepiece, and then pick the best power for the object you are observing. Alternatively, you can use the lowest magnification (24 mm) to find an object and center It in your field of view, and then increase the power until the desired view is achieved. It is fast and easy, and lets you examine any object at various magnifications without requiring you to physically change eyepieces.

The Celestron 93230 8 to 24 millimeters 1.25 inch zoom eyepiece allows you to zoom instantly with your scope from 8x magnification to 24x magnification.

Features

  • Zoom from low to high power in an instant with this versatile eyepiece!
  • Compatible with any telescope that accepts 1.25 eyepieces
  • This fully multi-coated Premium eyepiece zooms to any focal length between 8 mm and 24 mm - pick the best magnification for your subject
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 5 x 2.75 x 2.63 inches (12.7 x 7.0 x 6.7 cm)   |   Package Dimensions: 2.7 x 2.9 x 5.3 inches (6.9 x 7.4 x 13.5 cm)

First Available: 2005-02-18

Amazon Price: $64.49 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $79.95 | Used Price: $63.13

Warranty: 2-YEAR WARRANTY

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Neewer LCD Timer Shutter Release Remote Control for Canon 700D/T5i, 650D/T4i, 550D/T2i, 500D/T1i, 350D/XT, 400D/XTi, 1000D/XS, 450D/XSi, 60D, 100D, and Pentax

Model: 10000374   |    Mpn: 10000374   |    Ean: 0846619012986   |    PartNumber: 10000374   |   Asin: B003Q9RERY

The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can be illuminated. The remote has a stylish and ergonomic design. This timer remote cord allows the camera shutter to be released from a distance and prevents the camera from shaking *Two-stage release button: Halfway pressing for auto-focus, complete pressing for taking pictures. *Power source: Two AAA-type batteries (2XAAA Batteries not included) *Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56 s, and an interval of 5 min. Compatible with:
Canon (Replacement for RS-60E3) EOS Digital Rebel
Digital Rebel (aka 300D)
Rebel T1i (aka 500D)
Rebel XT (aka 350D)
Rebel XTi (aka 400D
Rebel XS (aka 1000D & Kiss F)
Rebel XSi (aka 450D & Kiss X2)
EOS Kiss/New Kiss/Kiss 7/Kiss III
Rebel 2000, Rebel G, Rebel G II, Rebel T1, Rebel T2, Rebel T2i
ELAN 7, ELAN 7E, ELAN 7N, ELAN II, ELAN IIE, IX LITE
PowerShot G10/G11
Pentax (Replacement for CS-205) K10D/K110D/K100D/K20D/K200D/KM
*ist D/DS/DS2/DL/DL2/K10
MZ-6, MZ-L, ZX-L
Hasselblad: H/H1/H2/H2D/H1D
Contax: 645/Nl/Nx/N/N Digital/LA-50
Samsung: GX-20 GX-10 GX-1L GX-1 Specifications: *Model: RS-60E3 Timer Remote Control Cord *Length of cord: 91 cm (3 ft. approx.) *Shutter release button: Dual Stage Button (halfway / complete) Functions: *Delay / Self Timer (DELAY) *BULB/Long Exposure (LONG) *Interval Timer (INTVL) *Exposure Count (N)

Features

  • K100D,K110D, K10D, *ist Ds2, *ist D, *ist Ds, *ist, *istDL, *ist DL2
  • Samsung GX-1L, GX-1S, GX-10
  • Canon EOS 30, 33, 50E, 300, 300V, 3000, 50, 300D (Digital Rebel)
  • 350D (Digital Rebel XT), 400D (Digital Rebel XTi), 450D (Digital Rebel XSi), 500D, 1000D
  • Timer delay: 0s to 99hrs 59min 59s in 1s increments
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 1.42 x 3.66 x 8.66 inches (3.6 x 9.3 x 22.0 cm)   |   Package Dimensions: 1.65 x 3.46 x 8.5 inches (4.2 x 8.8 x 21.6 cm)

Amazon Price: $21.95 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.95 | Used Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Celestron 51630 Star Pointer Telescope Finderscope, Black

Model: 51630   |    Mpn: 51630   |    Ean: 0050234516303   |    PartNumber: 51630   |   Asin: B00009X3UU

The Celestron Star Pointer Finderscope is the way to go if you want the easiest way possible to locate an object and center it in your eyepiece. A red dot finder, unlike an optical finder, has 1x magnification, displays a super wide field of view, and keeps the sky right side up and left-to-right correct, matching what you see with your unaided eyes. An LED creates a red dot, superimposed on a viewing screen, so you simply point the Star Pointer to the area or object you wish to observe, look through your eyepiece, and if properly aligned, the area in and around place you pointed the red dot will be centered in the field of view. If you like the idea of having some magnification, try installing both a red dot and optical finder on your telescope. Schmidt-Cassegrain and EdgeHD telescopes have multiple mounting bracket holes so you can get the best of both worlds. Just make sure to align both of them correctly, and you ll get the best use out of each of your finders. How to Align the Star Pointer Finderscope The first time you use your finder, you need to align it. This one-time setup procedure should be done during the day. Take the telescope outside and find an easily recognizable object, such as a streetlight, car license plate, or tall tree. The object should be as far away as possible, but at least a quarter mile away. Move the telescope left and right or up and down so that it is roughly pointing at the object. Look through the telescope using your low power eyepiece and move the telescope until the object you chose lies in the center of the view. Once the object is centered in your eyepiece, turn on the red dot. With your head positioned about a foot behind the finder, look through the round lens of the finder and locate the red dot. Without moving the telescope, use the two adjustment knobs located on the side and underneath the finder. One controls the left-right motion of the dot. The other controls the up-down motion of the dot. Adjust both of these until the red dot appears over the same object you are observing in the eyepiece. Your finder is now aligned and should not require realignment unless it is bumped or dropped. You can even take the finder off the telescope and reattach it while preserving alignment.

Features

  • The Star Pointer Finderscope adds "point and look" functionality to any telescope!
  • This red dot finder keeps the sky right-side up, matching what you see with your unaided eyes
  • The adjustable red dot is bright enough to see day or night
  • Attaches to just about any telescope thanks to the small footprint, even works great with astronomical binoculars and spotting scopes
  • Includes mounting base and a long-lasting CR2032 3V battery
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron Acquisition LLC

Item Dimensions: 1.63 x 2.75 x 6.13 inches (4.1 x 7.0 x 15.6 cm)   |   Package Dimensions: 2.13 x 5.35 x 7.87 inches (5.4 x 13.6 x 20.0 cm)

Amazon Price: $15.89 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.95 | Used Price: $12.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Celestron 93625 Universal 1.25-inch Camera T-Adapter

Model: 93625   |    Mpn: 93625   |    Ean: 0610696523556   |    PartNumber: 93625   |   Asin: B0000665V6

Allows attachment of 35mm SLR camera to the prime focus of your telescope Great for terrestrial, short exposure lunar and planetary photography Use with separate guidescope for long exposure deep-sky photography Fits any type of telescope that uses a 1.25-inch focuser or visual back Both a T-Adapter and T-Ring are required to mount camera

Features

  • Allows attachment of 35mm SLR camera to the prime focus of your telescope
  • Great for terrestrial, short exposure lunar and planetary photography
  • Use with separate guidescope for long exposure deep-sky photography
  • Fits any type of telescope that uses a 1.25-inch focuser or visual back
  • Both a T-Adapter and T-Ring are required to mount camera
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 1.9 x 2.1 x 3.8 inches (4.8 x 5.3 x 9.7 cm)   |   Package Dimensions: 1.4 x 1.4 x 3.7 inches (3.6 x 3.6 x 9.4 cm)

Amazon Price: $19.95 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.93 | Used Price: $19.64

Warranty: 1 Year Parts and Labor

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Gskyer AZ60350 Travel Refractor Astronomy Telescope with Bluetooth Remote Control

Model: AZ60350   |    Mpn: AZ60350   |    Ean: 0659676097267   |    PartNumber: AZ60350   |   Asin: B07GX9PYXN

Specifications:

Optical Design: Refractor
Aperture: 60mm(2.4in)
Focal Length: 350mm(13.78in)
Focal Ratio: F5.8
Eyepiece1: 25mm(0.98in)
Magnification1: 14X
Eyepiece2: 10mm(0.39in)
Magnification2: 35X
Max Magnification: 105
Finderscope: 5*24
Zenith Mirrors: 48 Erecting BAK4 prism
Mount: Altazimuth Mount
Optical coating: Antireflection Blue Film
Barlow lens: 3X
Resolution: 4.9
Angular Field of View: 2 40"
Tuble connection: Altazimuth Mount Screw
Tripod: Aluminium Alloy Tripod

Package Content:

1* Telescope Optical Tube
1* Aluminium Alloy Tripod
2* Eyepiece ( 25mm & 10mm)
1* 5*24 Finderscope
1* Zenith Mirrors
1* 3X Barlow lens
1* Smartphone Adapter
1* Bluetooth Camera Remote

Features

  • Wireless Bluetooth Remote No apps needed to download for use simply connect to phone. You only need to pair the remote control with your smartphone once, pictures can be taken up until 30 feet away. Lightweight and small enough to fit in pocket or as a keychain.
  • Ultra - Clear Telescope With 350mm focal length and 60 mm aperture to capture more light picture and optical glass coated for enhanced image brightness to protect your eyes. A fantastic refracting telescope for astronomy beginners and kids to explore the space.
  • High Quality Optics The interchangeable eyepieces with a 3x Barlow lens increase viewing power, 5*24 finderscope with mounting bracket, erect-image diagonal and two eyepieces(K10mm: 35X, K25mm: 14X) make locating objects easy.
  • Cost Effective We have our own factory, so we can offer you the lowest price and the best service. Easily obtainable under 80 dollars with Gskyer telescope, most likely save much money compared to other's. It is a collection of combination of quality, property, price and appearance advantages, which is exclusively designed for beginners.
  • Quality Guarantee 100% satisfaction guaranteed, our product comes with 12 months manufacturer's warranty. We will replace or refund if you have any concerns.
  • See more on Amazon...

Brand: Gskyer   |   Manufacturer: Gskyer

Item Dimensions: 5 x 7.6 x 18 inches (12.7 x 19.3 x 45.7 cm)   |   Package Dimensions: 5 x 7.5 x 18 inches (12.7 x 19.1 x 45.7 cm)

First Available: 2018-09-01

Amazon Price: $63.20 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $79.99

Warranty: NEVER aim your telescope at the sun or even close to the sun!

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Celestron 94009 Lens Shade for C6 and C8 Tubes (Black)

Model: 94009   |    Mpn: 94009   |    Ean: 5269692671973   |    PartNumber: 94009   |   Asin: B001TI44FE

Also called a dew shield, a lens shade is an essential accessory that protects your optical tube from excess moisture forming condensation on the corrector lens. A lens shade also helps block out stray light outside the path of the telescope for better viewing and astroimaging. This versatile lens shade can accommodate both 6" and 8" Schmidt-Cass grain optical tubes. Choose the outer Velcro strip for larger tubes and the inner strip for smaller tubes to customize your fit. Also compatible with the 8" EdgeHD optical tube.

Features

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 11.6 x 0.3 x 31 inches (29.5 x 0.8 x 78.7 cm)   |   Package Dimensions: 0.1 x 12 x 31.5 inches (0.3 x 30.5 x 80.0 cm)

Amazon Price: $22.89 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.95 | Used Price: $18.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Meade Instruments Series 4000 MoonFilter: ND96

Model: 7531   |    Mpn: 7531   |    Ean: 5580007454365   |    PartNumber: 7531   |   Asin: B00020XAK0

The Meade 07531 Series 4000 ND96 1.25-Inch Moon Filter for Series 4000 and 5000 Eyepieces helps to enhance the experience of viewing the moon with 13-percent transmission. This neutral density filter transmits light across the entire visual spectrum and acts as a filter to get rid of glare and irradiation. Telescopes with apertures of 4-inches and larger are ideal for this item. It can also divide nearby double stars when the brightness levels don t match. The Meade 07531 Series 4000 ND96 1.25-Inch Moon Filter for Series 4000 and 5000 Eyepieces comes with a 1-year limited warranty. Meade has everything you need to capture the night sky for experienced star-shooters, serious researchers and beginners alike. Serious astronomers for years have flocked to Meade telescopes for their quality optical systems and patented technology. Consumers know that "Meade Optics Inside" means that what they see through our telescopes will be views that are detailed, crisp and full of contrast. Look through a Meade this evening and see what you've been missing.

Features

  • Enhances the experience of viewing the moon with 13-percent transmission
  • Neutral Density filter transmits light across the entire visual spectrum
  • Acts as a filter to get rid of glare and irradiation
  • Ideal for telescopes with apertures of 4-inches and larger
  • Comes with a 1-year limited
  • See more on Amazon...

Brand: Meade Instruments   |   Manufacturer: Meade

Item Dimensions: 4 x 4 x 6 inches (10.2 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.9 x 1.8 x 2.2 inches (2.3 x 4.6 x 5.6 cm)

First Available: 2018-12-10

Amazon Price: $12.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

Warranty: Comes with a 1-year limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Meade Day and Night Telescope - 227000 EclipseView 82mm Reflecting with Removable Filter

Model: 227000   |    Mpn: 227000   |    Ean: 0709942998443   |    PartNumber: 227000   |   Asin: B06ZYHC6S8

The EclipseView 82mm Reflector allows you to set up and share the Sun gazing experience in seconds. This EclipseView table-top telescope is the ideal grab-and-go telescope offering easy and portable observation for an excellent value. SAFE for both Solar & Nighttime viewing.

Features

  • Removable white-light Solar filter for use both day & night!
  • Newtonian reflector with a generous 82mm (3.2) aperture to give you a great view of the Moon, planets, and the sun!
  • Lightweight (3.8 lbs.) and a compact 300mm (f/3.7) focal length for ultimate portability
  • Includes 26mm and 9mm eyepieces for low and high magnifications. Also includes 2x Barlow lens to double the magnifying power of your eyepieces
  • 360 swivel mount and a simple point-and-look design for easy use. CE & ISO Certified for Safe Viewing.
  • See more on Amazon...

Brand: Meade Instruments   |   Manufacturer: Meade

Item Dimensions: 17 x 8.25 x 8.25 inches (43.2 x 21.0 x 21.0 cm)   |   Package Dimensions: 10.2 x 10.2 x 16.3 inches (25.9 x 25.9 x 41.4 cm)

First Available: 2018-12-10

Amazon Price: $61.98 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $79.99

Warranty: Comes with a 1-year limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

1.25" 90-Degree Erect Image Prism Diagonal for Telescope, 31.7mm Optical Prism Inside Rather Than a Mirror

Model: DMC90   |    Mpn: DMC90   |    Ean: 0711102632494   |    PartNumber: DMC90   |   Asin: B07PYQWB1G

If you are tired of trying to invert things in your mind and staring at upside down stuff; this GazerOptics 90 Degree Diagonal Prism could turn your refracting telescope into a scope.

High Quality

The prism is made of genuine optically processed BAK7 glass, high quality optical 31.7mm prism inside rather than a mirror which makes your image bright and true.

Comfortable Observation

It can be used to observe objects with comfortable angle; it's convenient to look at the zenith of the sky and close to horizontal observation. It produces an image that is oriented properly, which means the image is upright and correct from left to right.

Wide Range of Uses

This is a great diagonal for daytime terrestrial use with small telescopes or spotting scopes. It can also be used for astronomy applications, especially when you would like to match the orientation of the star field with star maps and charts.

Reliable Guarantee

We provide 30-Days no reason return and 12-Month warranty.

P.S: Our product is produced to provide years of enjoyment for you. If you have any question about the product and service, please feel free to contact us. We will do our best to solve your problem.







Features

  • High quality 31.7mm optical prism inside rather than a mirror.
  • 99% Reflectivity across visible spectrum and genuine optically processed BAK7 glass for bright and true images.
  • More comfortable viewing orientation, produce an upright and correct image from left to right.
  • Filter thread for any 1.25 filter, accept any standard 1.25 eyepieces. Work with refractor and catadioptric telescopes, not recommended for reflector telescope.
  • This is a great diagonal for daytime terrestrial use and night time astronomy applications for telescopes or spotting scopes.
  • See more on Amazon...

Brand: GazerOptics   |   Manufacturer: GazerOptics

Item Dimensions: 2.95 x 1.77 x 2.79 inches (7.5 x 4.5 x 7.1 cm)   |   Package Dimensions: 2.05 x 2.99 x 3.15 inches (5.2 x 7.6 x 8.0 cm)

Amazon Price: $19.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

tatoko 10 Pcs Coin Vibration Motor Micro Mini Flat Vibration Motors Disc Shape Vibrating Motor DC 3V 12000RPM Two Wired 12mm x 3.4mm For Cell Phone, DIY Toys, Watch, Tablet Computer, Electronic Toy

 Ean: 0682559437539   |   Asin: B07PWTCW2H

Widely used in mobile phones, robots, bluetooth, toys, crafts, electronics, mini fans

Features

  • Product Parameters --- Rated Voltage: DC 3V 0.08A; Speed: 12000 2000 (rpm); Body Size: 12 x 3.4mm (D*T).
  • Line length; 5 cm
  • Energy Saving --- Miniature Vibration Motor very small electric consumption, strong vibration.
  • Applicable Scene --- Self adhesive Vibration Micro-motor for cell phone, tablet computer, electronic toy, watch, bracelet, health care products.
  • Package included: 10 x Cell Phone Vibration Motors
  • See more on Amazon...

Brand: tatoko   |   Manufacturer: tatoko

Amazon Price: $11.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Cell Phone Adapter Mount - Tiaoyeer Universal Cellphone Telescope Adapter Mount Compatible Binocular Monocular Spotting Scope Telescope Microscope, Fits Almost All Smartphone on The Market

 Ean: 0659521988443   |    PartNumber: TIA-CP001   |   Asin: B07P7MVX1Y

The Tiaoyeer Universal cell phone adapter mount can be compatible with microscope,telescope,binocular,monocular and spotting scope.



How to use Tiaoyeer Universal cell phone adapter mount?

1.Measure about the scope lens size,remember the adapter size when adapter take off the scope

2.Take off adapter with lens size,measure about the adapter center like the Green Circle showed

3.Keep the phone camera is in the adapter measure center

4.Fixed the phone to scope kike picture showed

Feature:

Universal-With super large width range 52mm-100mm(2.05 -3.94 ), fit iphone 6plus/6/5s/5,Samsung Note,Son,Sony Xperia Z and many other brand. Adjustable Clamping Force-The phone clamping part features adjustable locking mechanism with a steel bolt (not a spring).This part can separately mounts on any standard tripos(1/4-20) EVA Pads-Phone is well protected by high density EVA pads.Keep your device from scratch and damage. Durable Metal Materials-Mainly made of aluminum alloy,fully metal housing.Phone clamp is made of high strength PA plastic.One purchase for long rterm use. Compact and Light Weight-106g(3.74oz)

Product deatail

Product size: 2.76x5.91x1,97in

Product weight: 3.46oz

Item size: 5.91x1.97x1.97in

Item weight:2.68oz

Features

  • GETTING AMAZING IMAGE: With Tiaoyeer universal cellphone telescope adapter, connect your phone with telescope or microscope to explore far beautiful scene and amazing micro world.
  • SAFE AND DURABLE: The surface to connect phone and eyepiece are covered by soft EVA pad. Keep your device from being scratched and damaged. The body is made of aluminum alloy. The phone clamp is made of high strength PA Plastic. One purchase for long-time use.
  • UNIVERSAL: Large Width Range: 52-100 mm / 2.04-3.94 inch. Fit phone X, 8p, 8, 7plus,7,6plus, 6,5s,5, Samsung Note , Sony, Sony Xperia Z and many other brands
  • WIDE USE: Compliable with microscope, telescope, binoculars, monocular, nightvision spotting scope eyepiece diameter 0.98inch to 1.88inch(25mm-48mm)
  • PROTABLE AND COMPACT: The Cell Phone Adapter Mount is light weight : just 106g(3.74oz). Opting for a lightweight unit ensures enhanced portability so that you can put it into your backpack or even pocket when you have a trip and vacation
  • See more on Amazon...

Brand: Tiaoyeer   |   Manufacturer: Tiaoyeer

Item Dimensions: 1.97 x 1.97 x 5.91 inches (5.0 x 5.0 x 15.0 cm)   |   Package Dimensions: 2.05 x 4.69 x 6.22 inches (5.2 x 11.9 x 15.8 cm)

Amazon Price: $9.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Smatree Hard Protective Case Compatible for Nintendo Switch-Comfort Handheld Back Cover for Nintendo Switch Console (Blue)

Model: 3216689942   |    Mpn: Smatree-SA496   |    PartNumber: Smatree-SA496   |   Asin: B07MMVCR5G

Features

  • Protective Slim Shell Case: Smatree hard protective cover is designed for Nintendo Switch Console.
  • Frosted Transparent Back Panel &TPU Body Anti-scratch,Shock absorption Anti-dropping, it will give your Nintendo Switch Console an ultra protection.
  • Ergonomic Design :It feels comfortable and easy to grip while gaming.
  • Easy to Use:Install and take out your nintendo switch without effort,support nintendo switch stand,match with all the button controls and slots , you don't need taking your Nintendo Switch out of the case,convenient for use.
  • Convenient Back Protector: You can take out your Joy-Con grip out of the case separately without taking out the whole device.
  • See more on Amazon...

Brand: Smatree   |   Manufacturer: Smatree

Package Dimensions: 1 x 6 x 11 inches (2.5 x 15.2 x 27.9 cm)

Amazon Price: $14.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Smatree Hard Protective Case Compatible for Nintendo Switch-Comfort Handheld Back Cover for Nintendo Switch Console (Red)

Model: 3216689943   |    Mpn: Smatree-SA495   |    PartNumber: Smatree-SA495   |   Asin: B07M8R4MWD

Features

  • Protective Slim Shell Case: Smatree hard protective cover is designed for Nintendo Switch Console.
  • Frosted Transparent Back Panel &TPU Body Anti-scratch,Shock absorption Anti-dropping, it will give your Nintendo Switch Console an ultra protection.
  • Ergonomic Design :It feels comfortable and easy to grip while gaming.
  • Easy to Use:Install and take out your nintendo switch without effort,support nintendo switch stand,match with all the button controls and slots , you don't need taking your Nintendo Switch out of the case,convenient for use.
  • Convenient Back Protector: You can take out your Joy-Con grip out of the case separately without taking out the whole device.
  • See more on Amazon...

Brand: Smatree   |   Manufacturer: Smatree

Package Dimensions: 1.2 x 4.2 x 9.8 inches (3.0 x 10.7 x 24.9 cm)

Amazon Price: $14.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

20mm PLossl Telescope Eyepiece 52 Degree FOV Fully Coated- Threaded for Standard 1.25" Telescope Filters and Other Devices

Model: PL20   |    Mpn: PL20   |    Ean: 0711102632432   |    PartNumber: PL20   |   Asin: B07PT6YBL9

This GazerOptics 20mm medium power plossl eyepiece is an excellent "just right" eyepiece with the standard rubber eye guard and threaded base for various filters.

This eyepiece features fully coated optics with anti-reflection coating. This coating allows more light to pass through the eyepiece so you are rewarded with a bright, detailed view. The eyepiece barrel is threaded to reduce glare. Both the full optical coating and threaded barrel work together to minimize internal reflections.

With a 20mm focal length and 1.25" barrel diameter, this plossl telescope eyepiece will yield medium-power views in any telescope. Perfect for broad-field lunar observations, medium-sized star clusters, and a wide range of cloudy nebulae and deep-sky targets. You'll be amazed with clear views you see on clear evenings.

Specifications:

Optical Design: 4 elements

Focal Length: 20mm

Apparent Field of View: 52 degree

Body Material: fully metal

Filter Threads: standard 1.25" filter thread

Reliable Guarantee: We provide 30-Days no reason return and 12-Month warranty.

P.S: Our product is produced to provide years of enjoyment for you. If you have any question about the product and service, please feel free to contact us. We will do our best to solve your problem.







Features

  • Fully coated optical lens offers bright, clear views with excellent light transmission and color correction.
  • Perfect for broad-field lunar observations, medium-sized star clusters, and a wide range of cloudy nebulae and deep-sky targets.
  • Widest 52 degree apparent field of view with medium magnification, 12mm comfortable long eye relief.
  • It is an excellent just right eyepiece with the soft detachable rubber eye guard and threaded base for various standard 1.25 filters.
  • Comes with sturdy plastic case to protect the eyepiece from dust and moisture.
  • See more on Amazon...

Brand: GazerOptics   |   Manufacturer: GazerOptics

Item Dimensions: 2.36 x 1.25 x 1.25 inches (6.0 x 3.2 x 3.2 cm)   |   Package Dimensions: 1.25 x 1.25 x 2.36 inches (3.2 x 3.2 x 6.0 cm)

Amazon Price: $16.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Spotting Scope Smartphone Camera Adapter Binocular Monocular Universal Cell PhoneAdapter Mount- Gosky Quick Alignment Version Digiscoping Mount - Capturing Beauty and Sharing it with Your Friends

Model: GOPA001   |    Mpn: ADAPTER002   |    Ean: 0711102625946   |    PartNumber: ADAPTER002   |   Asin: B07DJ84P23

Gosky Digiscoping Spotting Scope Smartphone Adapter - 2018 Quick Alignment Version Universal Cell Phone Adapter Mount for Spotting Scopes Binoculars Monoculars

Beauty is everywhere. Let's explore the distant world together. Capture beauty and share fun together.

This is our 2017 new version digiscoping smartphone adapter which is perfect for spotting scopes, binoculars and monoculars. It is light weight, compact, sturdy and super easy to use. Most importantly, it makes alignment of the camera and optics super fast.

Featues:
1. Fast and Easy. Align the camera and optics quickly.
2. Perfect for Binocular, monocular, spotting scope the outer diameter of which from 0.965"-1.77"(25mm-45mm).
3. You can also use it on other optical device such as telescope, microscope, or others if the eyerelief(the distance between the eyepiece and your eye when you see a perfect view) is about 0.236"-0.394"(6mm-10mm).
4. Fit almost all brands of smartphones on the market with or without a case from small to large such as iphone 4, 5s, 6s,6p,7,7p,Samsung Galaxy S7,S6,Edge, Note 4,Sony,LG and much more.
5. Phone is well protected by rubber pads.
6. Durable metal materials: PA plastic.
7. Compact and Light Weight: Take up small space. Add small weight on the optics.

Related products:
Gosky universal cell phone adapter mount-for eyepiece outer diameter 28mm-47mm.(Search its ASIN: B013D2ULO6)
Gosky Universal Smartphone Adapter Mount for Spotting Scope Telescope Microscope Binocular Monocular-Big Type-for eyepiece outer diameter 32mm-62mm.(Search its ASIN: B01D5W0WES)
Gosky Camera Shutter Wire Control for Smartphones- Remove vibration taking photos.(Search its ASIN: B06Y21NKC3).

Note: Doesn't fit rifle scope because it mounts too close to the eyepiece.

Copyright@Gosky-All Rights Reseverd

Features

  • Capturing and Sharing! Take snapshots or videos of the view and share them to your friends and families via text, social media, email, and more
  • New Version universal cell phone adapter mount from Gosky optics. Perfect for Binoculars, Monoculars and Spotting scopes eyepiece outer diameter between 0.965-1.77(25mm-45mm).
  • Quick Alignment Version and Super easy to us. Align the camera and optics in few seconds. The centre of phone camera and the optics can automatically be aligned
  • Perfect for Binocular, monocular, spotting scope the outer diameter of which from 0.965-1.77(25mm-45mm). Please make sure that the dimension of the device is in this range
  • Updated phone holders. Fit almost all brands of smartphones on the market with or without a case from small to large such as iphone 4, 5s, 6s,6p,7,7p, Samsung Galaxy S7,S6,Edge, Note 4,Sony,LG and much more
  • See more on Amazon...

Brand: Gosky   |   Manufacturer: Gosky

Package Dimensions: 1.9 x 3.6 x 5.4 inches (4.8 x 9.1 x 13.7 cm)

First Available: 2019-02-01

Amazon Price: $16.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.99

Warranty: 1 Year Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Twotrees Nema 17 Stepper Motor + Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

 Ean: 8431269736331   |    PartNumber: 2012-02-21   |   Asin: B07PNZRPQH

If you want to know more information about the product, welcome to download the English manual :
https://s3.us-east-2.amazonaws.com/stepper-motor-driver/TB6600/MYSWEETY+TB6600+Stepper+Motor.pdf

Feature:
PWM chopper type bipolar stepper motor driver IC

1. 9V-42V DC power supply.
2. H bridge bipolar constant phase flow drive.
3. the maximum 4.0A of the eight kinds of output current.
4. the largest 32 subdivision of the 6 models are optional.
5. input signal high speed photoelectric isolation.
6. common-anodestandard single pulse interface.
7. offline to maintain the function.
8. semi closed enclosure can be adapted to a more stringent environment.
9. to provide energy-saving semi-automatic current lock function.
10. built-in temperature protection and over current protection.
Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.

IC parameter:

single chip bipolar sine microstep stepper motor driver.
the new BiCD 0.13 nm process.
up to 42V.
resistance (a +) = 0.4
the forward and reverse rotation control.
5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32)
output current: IOUT = 4.0A (peak, in 100ms)
rated output: IOUT = 3.5 A
package: HZIP25 - 1.00F
input port internal pull-down resistor: 100 K
alarm output pin current:Ialert = 1mA
monitoring output pin (MO): Imo= 1mA
with reset and enable pin
with standby function
Break through the traditional, single power supply
built in overheating protection (TSD) circuit
Undervoltage protection, built-in (UVLO) circuit
built-in overcurrent detection (ISD), circuit

Package Included:
1 x Motor Driver.
1 x Steeper Motor.
1 x wire.

Features

  • 1 Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
  • 2 Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
  • 3 Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
  • 4 The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
  • 5 Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.
  • See more on Amazon...

Brand: Twotrees   |   Manufacturer: Twotrees

Package Dimensions: 2.36 x 3.15 x 5.91 inches (6.0 x 8.0 x 15.0 cm)

Amazon Price: $21.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

1.25" 90 Degree Star Diagonal, Erect Image Zenith Mirror, Fully Coated for Refracting Telescope Eyepiece Lens

Model: DM90   |    Mpn: DM90   |    Ean: 0711102632470   |    PartNumber: DM90   |   Asin: B07PWH4W76

If you are tired of trying to invert things in your mind and staring at upside down stuff, this GazerOptics 90 Degree Star Diagonal could turn your refracting telescope into a scope.

High Quality

All glasses are fully coated for additional light transmission, greatly improves the clarity of the edge images.

Comfortable Observation

A diagonal that is angled at 90 helps avoid neck strain when looking through the eyepiece. It can be used to observe objects with comfortable angle.

Standard 1.25" Diameter

Fit for standard 1.25" telescope eyepiece and telescope focuser.

Designed For

Work with refractor and catadioptric telescopes, not recommended for reflector telescope.

PLEASE note that though this 90 diagonal displays images that are right side up and left to right orientation will be reversed, but also not affect astronomical observation.

P.S: Our product is produced to provide years of enjoyment for you. If you have any question about the product and service, please feel free to contact us. We will do our best to solve problem.







Features

  • Fully Coated for additional light transmission, greatly improves the clarity of the edge images.
  • Comfortable observation with 90-degree, avoid neck strain when looking through the eyepiece.
  • Protective coating on the mirror to ensure a long life, metal barrel - for secure seating in the focuser.
  • Standard 1.25'' diameter; fit for any 1.25'' focuser and eyepiece.
  • Work with refractor telescopes; not recommended for reflector telescopes.
  • See more on Amazon...

Brand: GazerOptics   |   Manufacturer: GazerOptics

Item Dimensions: 2.36 x 1.61 x 3.93 inches (6.0 x 4.1 x 10.0 cm)   |   Package Dimensions: 2.05 x 2.99 x 3.15 inches (5.2 x 7.6 x 8.0 cm)

Amazon Price: $15.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Dorhea 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino + 20 PCS Male to Female Jumper Wire Cable

 Ean: 0701715541283   |    PartNumber: 15712-1   |   Asin: B07Q4B5W4X

Feature:
A, B, C, D four-phase LED indicates the status of the stepper motor work.
Stepper motor with a standard interface, when used directly plug gable.
Rated Voltage: DC5V 4-phase
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s- Step angle: 5.625 x 1/64
DC Resistance: 200 7% (25C)
Reduction ratio: 1/64
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.m
Temperature Rise: Package including:
5 X Uln2003 Stepper Motor
5 X Driver Board
20 X female to male cable

Features

  • Stepper motor with a standard interface, when used directly plug gable,very easy and convenient.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking.
  • All the stepper motors compatible with arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Packing include : 5 pcs uln2003 stepper motor + 5 pcs driver board + 20 pcs jumper wire cable.
  • See more on Amazon...

Brand: Dorhea   |   Manufacturer: Dorhea

Package Dimensions: 0.3 x 3 x 5 inches (0.8 x 7.6 x 12.7 cm)

Amazon Price: $11.99 | as of 04/23/2019(11:50pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 1.25" 90-Degree Erect Image Prism Diagonal for Telescope, 31.7mm Optical Prism Inside Rather Than a ...
  2. tatoko 10 Pcs Coin Vibration Motor Micro Mini Flat Vibration Motors Disc Shape Vibrating Motor DC 3V...
  3. Cell Phone Adapter Mount - Tiaoyeer Universal Cellphone Telescope Adapter Mount Compatible Binocular...
  4. Smatree Hard Protective Case Compatible for Nintendo Switch-Comfort Handheld Back Cover for Nintendo...
  5. Smatree Hard Protective Case Compatible for Nintendo Switch-Comfort Handheld Back Cover for Nintendo...
  6. 20mm PLossl Telescope Eyepiece 52 Degree FOV Fully Coated- Threaded for Standard 1.25" Telescope Fil...
  7. Spotting Scope Smartphone Camera Adapter Binocular Monocular Universal Cell PhoneAdapter Mount- Gosk...
  8. Twotrees Nema 17 Stepper Motor + Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Sin...
  9. 1.25" 90 Degree Star Diagonal, Erect Image Zenith Mirror, Fully Coated for Refracting Telescope Eyep...
  10. Dorhea 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino + 20 PCS Male to ...

Most Wished For

  1. Gosky Universal Cell Phone Adapter Mount - Compatible Binocular Monocular Spotting Scope Telescope M...
  2. Celestron Eyepiece and Filter Kit – 14 Piece Telescope Accessory Set
  3. Celestron NexYZ 3-Axis Universal Smartphone Adapter
  4. Celestron PowerSeeker 127EQ Telescope with Basic Smartphone Adapter 1.25" Capture Your Discoveries
  5. Celestron 93230 8 to 24mm 1.25 Zoom Eyepiece
  6. Neewer LCD Timer Shutter Release Remote Control for Canon 700D/T5i, 650D/T4i, 550D/T2i, 500D/T1i, 35...
  7. Orion 05662 1.25-Inch 13 Percent Transmission Moon Filter (Black)
  8. Celestron 51630 Star Pointer Telescope Finderscope, Black
  9. SVBONY Red Laser Collimator for Newtonian Reflector Telescope Alignment 1.25'' 7 Bright Levels Tripl...
  10. Celestron 93625 Universal 1.25-inch Camera T-Adapter

Most Gifted

  1. Gosky Universal Cell Phone Adapter Mount - Compatible Binocular Monocular Spotting Scope Telescope M...
  2. Celestron 81035 Basic Smartphone Adapter 1.25" Capture Your Discoveries, Black
  3. Celestron NexYZ 3-Axis Universal Smartphone Adapter
  4. Orion 05662 1.25-Inch 13 Percent Transmission Moon Filter (Black)
  5. Gskyer AZ60350 Travel Refractor Astronomy Telescope with Bluetooth Remote Control
  6. Celestron 93973 Skyportal Wifi Module, Black
  7. Celestron 94009 Lens Shade for C6 and C8 Tubes (Black)
  8. Meade Instruments Series 4000 MoonFilter: ND96
  9. Meade Day and Night Telescope - 227000 EclipseView 82mm Reflecting with Removable Filter
  10. Celestron 93625 Universal 1.25-inch Camera T-Adapter

Top Selling

  1. Gosky Universal Cell Phone Adapter Mount - Compatible Binocular Monocular Spotting Scope Telescope M...
  2. Orion 05662 1.25-Inch 13 Percent Transmission Moon Filter (Black)
  3. Gosky Camera Shutter Wire Control for Smartphones and Smartphones Adapter Mount Such as Universal Ce...
  4. Celestron 81035 Basic Smartphone Adapter 1.25" Capture Your Discoveries, Black
  5. Celestron NexYZ 3-Axis Universal Smartphone Adapter
  6. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  7. SVBONY Red Laser Collimator for Newtonian Reflector Telescope Alignment 1.25'' 7 Bright Levels Tripl...
  8. Celestron Eyepiece and Filter Kit – 14 Piece Telescope Accessory Set
  9. Celestron 93973 Skyportal Wifi Module, Black
  10. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.