Frontpage > Electronics > Photo > Lens Follow Focus Levers

Best Lens Follow Focus Levers - Buying Guide

Last Updated: 11/12/2019

Share on

Bestselling Lens Follow Focus Levers on Amazon

  1. JJC Professional Camera Lens Auto Focus Calibration Tool Chart,Help Fine Tune Focus of Lens via Sele...
  2. Tilta Nucleus-Nano Wireless Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirro...
  3. DSLRKIT 28X18cm Lens Focus Calibration Tool Alignment Ruler Folding Card (Pack of 2)
  4. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  5. Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcord...
  6. Movo FR3 Adjustable Follow Focus Ring Set of 3 with 65mm, 75mm and 85mm Lens Gear Rings (Standard 32...
  7. FOTGA DP3000 M1 DSLR Follow Focus with Flexible Gear Belt for 15mm Rail Rod Rig for DSLR HDSLR DV 5D...
  8. Fotga 18" Flexible Whip Speed Crank for Follow Focus FF Standard 12mmx12mm Port
  9. Movo Photo FF200 Manual Follow Focus, Zoom Control Lever Lens Clamp for DSLR Video Cameras
  10. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...

  #1

JJC Professional Camera Lens Auto Focus Calibration Tool Chart,Help Fine Tune Focus of Lens via Select DSLR Camera Has AF Fine Tune AF Micro Adjustment Function to Achieve the Greatest Image Sharpness

Model: ACA01   |    Mpn: 4351752064   |    Ean: 6940202303216   |    PartNumber: 4351752064   |   Asin: B07JNDPTFJ

This Autofocus Calibration Tool specially design for select cameras with "AF Fine Tune" or " AF Micro Adjustment" function. It comes with a built-in bubble level for keeping itself on the level. It also features a 1/4"-20 tripod socket for mounting it on a tripod. It's a good partner for you to test the autofocus performance.

Compatibility:

In order to make full use of the calibration tool, a camera must have the function of autofocus adjustment, please check your camera's instructions manual to see if this feature is available in your setup menu. Below are part of the compatible cameras with "AF Fine Tune" or " AF Micro Adjustment" function for your reference:

Canon EOS 50D,60D,70D,80D,6D,6D Mark II,7D,7D Mark II,5D Mark IV III II,1D Mark III IV,1Ds Mark III II,1D C
Nikon Z7,Z6,D7000,D7100,D7200,D300,D300S,D500,D600,D610,D700,D750,D800,D800E,D810,D810A,D850,D3,D3S,D3X,D4,D4S,D5,Df
Sony A850,A900,A77 Mark II,A99 Mark II

Steps of use:

A. Open and set up the tool vertically.
B. Aim at the center of the circle. (For long zoom lens, aim at the big circle; for short zoom lens, aim at the small circle)
C. Make sure the camera's CCD sensor is parallel to the center of the circle.
D. Focus on the center of the circle and take a picture (Advise using the maximum aperture as this brings a small depth of field so that you can examine the focus accuracy more easily. )
E. If the "0" on the scale is clear, it means the focus is accurate as this means the "0" and the center of the circle are in the same focal plane.
F. If the "0" on the scale is not clear while it is clear on the "1" below or above the "0", it means it is 1cm front focusing or 1cm back focusing, in this case, you need to fine tune the focus accordingly via your camera. See how to use in this link: https://youtu.be/ad8_hFDvcPc

Features

  • Made of durable plastic, compact & lightweight, with integrated bubble level and 1/4"-20 tripod mount, making this the most convenient way to adjust your own camera gear, leanr more from the video link here: https://youtu.be/ad8_hFDvcPc
  • Fast, easy solution for your interchangeable lenses and recent DSLR bodies provides razor-sharp auto-focusing, using modern DSLR autofocus micro-adjustment technology
  • Save time and hassle of sending your equipment in for service. Now you can check or calibrate your own lenses
  • Accurate and repeatable calibration of your lenses and recent DSLR bodies
  • Worthwhile investment to ensure your camera is focusing your lenses as precisely as possible
  • See more on Amazon...

Brand: JJC   |   Manufacturer: JJC

Package Dimensions: 0.75 x 6.3 x 9.6 inches (1.9 x 16.0 x 24.4 cm)

Amazon Price: $35.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Tilta Nucleus-Nano Wireless Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirrorless, or Cine-Style Lenses on Cage, Gimbal Such As Ronin S

 Ean: 6256524860260   |    PartNumber: Nucleus-Nano with EACHSHOT Cloth   |   Asin: B07RHF9H74

Features:
Supports wirelessly control the focus of most DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus hand wheel. The units can connect to each other from 300' away, and can be mounted in a variety of ways.

The units support run/stop functions and setting hard A and B limits for more control over your camera and lens. The hand wheel is powered by a single 14500 lithium battery and the motor is powered by your camera or a battery via its micro-USB connector. The units are both constructed of durable materials, and the hand wheel features an attractive, comfortable rosewood grip.

Included in the kit with the hand wheel and motor are a mounting baseplate for 95mm lenses, a 15mm rod, a micro-USB motor cable, a 0.8 MOD motor gear, two lens gear rings, attachment plates for the Ronin-S/G2 and Zhiyun Crane, a dual-battery charger, two batteries, mounting screws, and two Allen keys.

EACHSHOT Cleaning Cloth: Ultra gentle! Extremely fine microfiber leaves zero scratches,streaks or marks.Safe for all surfaces and lenses.

Package Including:
1 x Nucleus-Nano Hand Wheel Controller
1 x Nucleus-Nano Wireless Follow Focus Motor
1 x 15mm Single Rod Mounting Baseplate For 95mm Lens
2 x 1/4 -20 Hex Screws
2 x Rod Mount Hex Screw
1 x 15mm x 100mm Black Aluminum Rod
1 x 31cm 5V Micro USB male to 5V Micro USB male motor power cable
1 x 12V / 2A Ronin-S to 5V Micro USB male motor power cable
2 x Photographic lens follow focus gear rings
1 x Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x
1 x Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1
1 x 14500 Battery Charger
2 x 14500 Batteries
1 x M4 Allen key
1 x M6 Allen key
1 x Soft Case
1 x User Guide
1 x EACHSHOT Cleaning Cloth

Features

Brand: Tilta   |   Manufacturer: Tilta

Package Dimensions: 3.07 x 7.32 x 9.21 inches (7.8 x 18.6 x 23.4 cm)

Amazon Price: $229.00 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: | Used Price: $224.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

DSLRKIT 28X18cm Lens Focus Calibration Tool Alignment Ruler Folding Card (Pack of 2)

Model: LFCT2-L   |    Mpn: LFCT2-L   |    PartNumber: LFCT2-L   |   Asin: B07B5ZHF2P

Instruction
This compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be "spot on". You can use this ruler to determine how "off" the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this.

On Nikon cameras, this feature is known as "AF Fine Tune". On Canon and Sony cameras, it's known as "AF Micro Adjustment". Please refer to your camera's instructions manual to see if this feature is present.

Size:28.1*18cm

Package Included:
Lens Focus Calibration Card X2

Usage
1. Set up the ruler.
2. Ensure both the camera and ruler are level, exactly perpendicular and at the same height. It is best to mount the camera on a tripod to do this.
3. Set the lens to the widest aperture to obtain the shallowest depth of field. This will make it easier to determine if your lens is focusing accurately. Auto-focus on the crosshair at the center of the ruler, then take a photo.
4. Inspect the photo to see if focusing is accurate. It is recommended that you do this on a computer since you will be able to see better on a bigger screen. If focusing is accurate, the '0' on the ruler should be the sharpest point on the image and the other numbers get blurrier as you move away from the 0.
5. If any number above the 0 is clearer, then your lens is backfocusing. Otherwise, if any number below the 0 is clearer, then your lens is front focusing. In either case, you would have to set the auto-focus micro-adjustment parameters on your camera body until you are able to obtain a picture that is sharpest at the '0' on the ruler.

Features

  • This compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be "spot on".
  • You can use this ruler to determine how off the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this
  • On Nikon cameras, this feature is known as AF Fine Tune. On Canon and Sony cameras, it's known as AF Micro Adjustment. Please refer to your camera's instructions manual to see if this feature is present.
  • Size:28.1*18cm
  • Package Included: Lens Focus Calibration Card X 2
  • See more on Amazon...

Brand: DSLRKIT   |   Manufacturer: DSLRKIT

Package Dimensions: 0.35 x 7.72 x 11.22 inches (0.9 x 19.6 x 28.5 cm)

Amazon Price: $9.90 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Video Fits 15mm Rod Film Making System,Shoulder Support,Stabilizer,Movie Rig(Red+Black)

Model: 10090365   |    Mpn: 10090365   |    Ean: 0191073016255   |    PartNumber: 10090365   |   Asin: B072QDLHR3

Note: Only follow focus, camera and other shoulder rig are not included.

Description:

This follow focus is compatible with Sony Nikon Canon and other DSLR Camera Camcorder DV Video; And it fits industry standard 15mm rod mounts and 60mm center to center distance.

It can be easy to mount and take down; Using gear drive can adjust camera focus in a more accurate and smooth way.

Its gear ring belt is suitable for less than 100mm diameters lens.

Non-slip design with grooved knob; The white mark ring is made of plastic and it can be used to mark the scale on follow focus.

It is great for follow focus shooting.

Specifications:

Material: Metal + Plastic

Rod Diameter: 15mm

Center to Center Distance: 60mm

Suitable for: camera lens of less than 100mm diameter

Color: Red + Black

Package Contents:

1 x Follow Focus

Features

  • Compatible with Canon Nikon Sony and other DSLR Camera Camcorder DV Video; Fits industry standard 15mm rod mounts and 60mm center to center distance
  • Easy to mount and take down; Gear drive can adjust camera focus in a more accurate and smooth way
  • Gear ring belt suitable for less than 100mm diameters lens
  • Non-slip design with grooved knob; White mark ring made of plastic and used to mark the scale on follow focus
  • Note: Only follow focus, camera and other shoulder rig are not included
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.3 x 3.9 x 6.3 inches (8.4 x 9.9 x 16.0 cm)   |   Package Dimensions: 3.27 x 3.94 x 6.26 inches (8.3 x 10.0 x 15.9 cm)

Amazon Price: $39.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: | Used Price: $39.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcorder/Film/Video Cameras,Fits Shoulder Supports,Stabilizers,Movie rigs

Model: 10087076   |    Mpn: 10087076   |    Ean: 0699618402094   |    PartNumber: 10087076   |   Asin: B01FM50SKO

Note:Camera,rod and rod rig are not included!

Description:

A follow focus is an essential tool for your video shooting. It makes you look more professional, and its advantages are what many photographers or videographers are looking for in pursuit of efficiency and convenience.

Outstanding feature:
With single rod clamp!
Meaning you can mount the follow focus to single rod and adjust the mounting position easier!

With this product you can:
Adjust your camera focus smoothly and accurately-- Thanks to its gear-driven design.
Mount it both sides for left-handed or right-handed photographers
Make it fit your most lenses with the included gear belt.

Specification:
Material: Aluminium and ABS Plastic
Suitable for Lens Diameter:less than 100mm diameter

Package Content:
1 * Follow Focus

Features

  • Use gear drive to adjust camera focus in a more accurate and smooth way. Easy to install and use.
  • Follow Focus comes mounts with a single 15mm Quick Release Rod Clamp and can be quickly removed from the rail system, making it easier to change lenses and gear positions.
  • Grooved knob for slip-free control.
  • It can be mounted from both sides for left-handed or right-handed photographers.
  • Compitable with all DSLR cameras,camcorders.film cameras and video cameras.It can fit industry standard 15mm/0.59 rod.(ROD NOT INCLUDED)
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.1 x 4.1 x 6.2 inches (7.9 x 10.4 x 15.7 cm)   |   Package Dimensions: 3.2 x 3.9 x 6.2 inches (8.1 x 9.9 x 15.7 cm)

Amazon Price: $39.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Movo FR3 Adjustable Follow Focus Ring Set of 3 with 65mm, 75mm and 85mm Lens Gear Rings (Standard 32 Pitch - 0.8 mod)

Model: FR3   |    Mpn: FR3   |    Ean: 7445803103450   |    PartNumber: FR3   |   Asin: B012Y71834

The Movo FR3 includes three sizes of gears that allow you to use your follow focus system with different sized lenses. The Movo FR3 features large pitch diameters for more accurate focusing. Rings engineered for 65mm, 75mm and 85mm lenses sizes. Provides slip-free fit suitable for professional cinematography. Compatible with any standard follow focus system.

Features

  • COMPATIBILITY: All rings have the same outer diameter and will work with most follow focus systems (standard 32 pitch - 0.8 mod)
  • SET OF 3: Each focus ring are adjustable and fit 65mm, 75mm, and 85mm lenses
  • 1-YEAR WARRANTY: We've got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • DURABLE: Made with hard plastic, the lens rings can endure the rigorous turning and adjusting without breaking easily
  • PROFESSIONAL FOCUSING: These lens rings feature a large pitch diameter so you can accurately focus your subjects clearly and in-frame with ease
  • See more on Amazon...

Brand: Movo   |   Manufacturer: Movo

Package Dimensions: 2.2 x 4.8 x 4.8 inches (5.6 x 12.2 x 12.2 cm)

Amazon Price: $16.95 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

FOTGA DP3000 M1 DSLR Follow Focus with Flexible Gear Belt for 15mm Rail Rod Rig for DSLR HDSLR DV 5D II III IV 6D 7D 70D 60D D7100 D500 A7 A7R A7S II III A9 GH4/5/5s

Model: DP3001   |    Mpn: DP3001   |    Ean: 0799975142456   |    PartNumber: DP3001   |   Asin: B00EH9HKD0

This FOTGA DP3000 M1 follow focus is not only keeping with traditional common features available on the market but also equipped with technological advances in image capture. A smart, quality, light weight, full featured, fast focus product, equal to the most modern DV/HDV/ & DSLR camera lenses available today.

With more and more DSLR's used to record video, a proper follow focus system is a must. Operators using our FOTGA follow focus sing its praises and have discovered the true value of this all-inclusive kit.


Specifications:
Material: Aluminum Alloy, Plastic.
Improved design has dampening which gives virtually zero backlash(

Features

  • There is an improvement on its inner structure to reach a high level in this field, the Dampened gear box, which permits much less backlash(even zero backlash),even better than most follow focus on the market
  • The gear wheel on it can be detached and installed in both sides,which makes it suitable for both left-hand and right-hand photographer. The connection mount to the gear wheel is not only the newest version but also the last upgrade version
  • The white mark ring is made of magnet material. It can be detached or attached easily and quickly from the follow focus. You can also buy additional mark ring.There is a release button on the side which can easily locate the focus
  • Another advantage of this follow focus is it can use different size gears. It can work with 3 different size gear to meet your different need with various lens,We will ship the standard 43T
  • Material: Aluminum Alloy, Plastic.This set comes with a free flexible gear belt can be used with any zoom or prime lenses with a wide range of lens diameters(any size from 46 to 110mm)
  • See more on Amazon...

Brand: FOTGA   |   Manufacturer: FOTGA

Package Dimensions: 3.5 x 9.15 x 11.5 inches (8.9 x 23.2 x 29.2 cm)

Amazon Price: $65.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Fotga 18" Flexible Whip Speed Crank for Follow Focus FF Standard 12mmx12mm Port

Model: DP3009   |    Mpn: DP3009   |    Ean: 0799975142531   |    PartNumber: DP3009   |   Asin: B00ESXV54K

The FOTGA DP3000 whip speed crank can be attached in the provided square hole at the center of the wheel in the follow focus. Thus, the hand merely has to spin the rod, which turns the wheel. The micro whip allows the user to adjust focus remotely significantly reducing the risk of vibration being picked by the camera.

Made of the material as heat-shrink tube and aluminum, this Fotga brand speed crank whip is strong enough and touch good. Diameter of the blue hand wheel is 42mm,and the proper ergonomic design on the wheel makes it easy on using. And it fit for any follow focus with standard accessory port (size: 12mm x 12mm).

Safety-look design at the end of termination, which ensure is not fall off the follow focus.



Specification

Length: 18"
Connector size: 12mm x 12mm
Color: Black



Package Including:

1 X 18" FOTGA Flexible Whip for Follow Focus

Features

  • The FOTGA DP3000 whip speed crank can be attached in the provided square hole at the center of the wheel in the follow focus. Thus, the hand merely has to spin the rod, which turns the wheel
  • The micro whip allows the user to adjust focus remotely significantly reducing the risk of vibration being picked by the camera
  • Made of the material as heat-shrink tube and aluminum, this Fotga brand speed crank whip is strong enough and touch good. Diameter of the blue hand wheel is 42mm,and the proper ergonomic design on the wheel makes it easy on using. And it fit for any follow focus with standard accessory port (size:12mm x 12mm)
  • Safety-look design at the end of termination, which ensure is not fall off the follow focus
  • Length:18 Connector size: 12mm x 12mm Color: Black
  • See more on Amazon...

Brand: FOTGA   |   Manufacturer: Fotga

Package Dimensions: 2.25 x 3 x 17 inches (5.7 x 7.6 x 43.2 cm)

Amazon Price: $21.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Movo Photo FF200 Manual Follow Focus, Zoom Control Lever Lens Clamp for DSLR Video Cameras

Model: FF200   |    Mpn: FF200   |    Ean: 6048889003624   |    PartNumber: FF200   |   Asin: B00ISH33JW

The Movo Photo FF220 is a simple yet effective follow focus design which ensures focusing or zoom is smooth and precise even when your subject moves, and the Movo Photo FF220 Reversible Follow Focus is easy to operate. Universal design allows it to adapt to almost every lens available. Velcro closure be locked tight for precise performance. Elevate your craft, create awesome shot effects and professional-quality results.

Features

  • A simple, affordable follow focus / zoom controller
  • Universal design to fit almost all lenses
  • Ensures focusing or zoom is smooth and precise
  • Durable, convenient and lightweight
  • 1 Year Warranty
  • See more on Amazon...

Brand: Movo   |   Manufacturer: Movo

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.94 x 3.78 x 4.25 inches (2.4 x 9.6 x 10.8 cm)

Amazon Price: $8.95 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: $19.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Video Fits 15mm Rod Film Making System,Shoulder Support,Stabilizer,Movie Rig(Blue+Black)

Model: 10090363   |    Mpn: 10090363   |    Ean: 0191073016262   |    PartNumber: 10090363   |   Asin: B071WM12K3

Note: Only follow focus, camera and other shoulder rig are not included.

Description:

This follow focus is compatible with Sony Nikon Canon and other DSLR Camera Camcorder DV Video; And it fits industry standard 15mm rod mounts and 60mm center to center distance.

It can be easy to mount and take down; Using gear drive can adjust camera focus in a more accurate and smooth way.

Its gear ring belt is suitable for less than 100mm diameters lens.

Non-slip design with grooved knob; The white mark ring is made of plastic and it can be used to mark the scale on follow focus.

It is great for follow focus shooting.

Specifications:

Material: Metal + Plastic

Rod Diameter: 15mm

Center to Center Distance: 60mm

Suitable for: camera lens of less than 100mm diameter

Color: Blue + Black

Package Contents:

1 x Follow Focus

Features

  • Compatible with Canon Nikon Sony and other DSLR Camera Camcorder DV Video; Fits industry standard 15mm rod mounts and 60mm center to center distance
  • Easy to mount and take down; Gear drive can adjust camera focus in a more accurate and smooth way
  • Gear ring belt suitable for less than 100mm diameters lens
  • Non-slip design with grooved knob; White mark ring made of plastic and used to mark the scale on follow focus
  • Note: Only follow focus, camera and other shoulder rig are not included
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.3 x 5 x 7 inches (8.4 x 12.7 x 17.8 cm)   |   Package Dimensions: 3.23 x 3.94 x 6.5 inches (8.2 x 10.0 x 16.5 cm)

Amazon Price: $39.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Tiltamax Nucleus-Nano: Wireless Lens Control System, None

Model: WLC-T04   |    Mpn: WLC-T04   |    Ean: 0709016727122   |    PartNumber: WLC-T04   |   Asin: B07RB81DJ8

? Watch Nucleus Nano Video Reviews ? Available to order today. The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified cine-style vintage photo lenses. The Nano is fully cross-compatible with the Nucleus-M controllers and motors. The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time. When used in conjunction with the Tiltamax Gravity G2X Compact Handheld Gimbal , simple single-handed operation is possible by mounting the controller unit to the gimbal body s rosette connection. Easily toggle between the G2X s modes and pull focus at the same time! The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions. The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor s power to be drawn from the G2X tilt motor s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately). The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a qui

Features

  • The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems.
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision!
  • The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.
  • Includes adapters for Ronin-S and Zhiyun Crane gimbals
  • Fully compatible with Tilta's Nucleus-M motors & controllers + G2X gimbal
  • See more on Amazon...

Brand: Tilta   |   Manufacturer: Tilta

Item Dimensions: 3.2 x 7.5 x 7.5 inches (8.1 x 19.1 x 19.1 cm)   |   Package Dimensions: 3.3 x 9.2 x 9.5 inches (8.4 x 23.4 x 24.1 cm)

Amazon Price: $229.00 | as of 11/12/2019(11:18am pst)
Availibility:
List Price: $229.00 | Used Price: $225.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Movo F2X Precision Follow Focus System with Hard Stops and 65mm, 75mm, 85mm Adjustable Gear Rings

Model: F2X   |    Mpn: F2X   |    Ean: 0604888904520   |    PartNumber: F2X   |   Asin: B01MU7N2ZL

wireless follow focus system 15mm rod follow focus The MOVO F2X Precision Follow Focus System is a professional grade follow focus constructed from precisely machined aluminum to guarantee durability and high quality performance. A follow focus will enable you to efficiently and precisely pull focus creating smooth and fluid shots. There is no reason to spend several hundred, or even thousands of dollars on a follow focus system when the F2X produces shots of equal quality for just a fraction of the price.

The system is compatible with standard 15mm rail rods. Integrated A/B hard stops that let you set the start/end points allow for fast and repeatable racking optimal for precise performance. The F2X uses a standard 0.8 pitch gear and is horizontally and vertically adjustable while also being reversible, making it incredibly easy to use. A removable magnetic marking disc makes installment or replacement a quick and easy process. Includes (3) lens gear rings.

MOVO 1 year Warranty: This product is backed by a 1 year manufacturer warranty. Our friendly and responsive USA-based customer service team is ready to help you with any questions or concerns.

Included in the box: MOVO F2X Follow Focus 66mm Gear ring 77mm Gear ring 88mm Gear ring 0.8 pitch gear Magnetic marking disc

Specifications
Construction: Aluminum
Mount Type: 15mm Rod Clamp
Included Lens Gears: Up to 66mm, up to 77mm, up to 88mm
Minimum Dimensions (LxWxH): 8.5 x 3.1 x 4.5" (21.7 x 8.1 x 11.4cm)
Fully Expanded Dimensions (LxWxH): 10 x 3.1 x 5.2" (25.3 x 8.1 x 13.2cm)
Weight: 20 oz (570g)

Features

  • PRECISE SHOTS: The Intergrated A/B Hard Stops help with fast, repeatable racking between two points and ensures precision focus adjustment
  • PROFESSIONAL SHOTS: Horizontally or vertically adjustable and reversible with a 0.8 pitch gear for capturing professional focus pull and transitions
  • 1 YEAR WARRANTY: Movo USA customer service support, the perfect camera follow focus to add to your professional gear kit
  • ALUMINUM CONSTRUCTION: A pecisely machined follow focus with high-quality workmanship for professional feel and build
  • PRECISION FOCUS: The removable magnetic marking disc helps with viewing focus marks from various angles.
  • See more on Amazon...

Brand: Movo   |   Manufacturer: Movo

Package Dimensions: 6.2 x 6.2 x 8.1 inches (15.7 x 15.7 x 20.6 cm)

Amazon Price: $190.95 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Neewer A-B Stop Follow Focus C2 with Gear Ring Belt for DSLR Cameras Such as Nikon,Canon,Sony DV/Camcorder/Film/Video Cameras,Fits 15mm Rod Mounts,Shoulder Supports

Model: 10072220   |    Mpn: 10072220   |    Ean: 0804808139494   |    PartNumber: 10072220   |   Asin: B00H7WFUVI

Note:Camera and Rig are Not included! Description:
No matter what your camera, this High Quality NEEWER Follow Focus for Customized Film-maker System lends your micro shoots precise or your video production the smooth, precise focus control of a big-budget film. Whether shooting with a fixed-lens camcorder, interchangeable cinema lenses, or a video-capable DSLR camera, the precision-machined Follow Focus system provides repeatable, accurate focusing. It is compatible with camcorder or DSLR models such as Nikon D90, D300s, Canon 550D 7D, 5D MKII and more Features:
Completely gear-driven design for slip-free, accurate, and repeatable focus movement This Follow Focus Integrated with A/B Hard Stops which have easy begin/end setups for fast repeatable racking between two points, and make focusing lenses that have no hard stops (such as Canon EF lenses) much easier. Mounts onto 15 mm Rod Support (60mm center to center difference). Gear drive can be mounted from both sides Compatible with industry standard 15mm rods Specifications: Material: Metal and plastic Fit Rail Distance: 60 mm Fit Rail Diameter: 15 mm Suitable for: camera lens of less than 100mm diameter Package Contents 1x NEEWER Follow Focus C2 For Customized Filmmaker System

Features

  • Completely gear-driven design for slip-free, accurate, and repeatable focus movement
  • This Follow Focus Integrated with A/B Hard Stops which have easy begin/end setups for fast repeatable racking between two points, and make focusing lenses that have no hard stops (such as Canon EF lenses) much easier.
  • Mounts onto 15 mm Rod Support (60mm center to center difference).
  • Gear drive can be mounted from both sides
  • The white mark ring is made of magnet material. It can be detached or attached very easily and quickly on metal-made follow focus.
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.74 x 3.94 x 7.48 inches (9.5 x 10.0 x 19.0 cm)   |   Package Dimensions: 4.13 x 7.01 x 9.17 inches (10.5 x 17.8 x 23.3 cm)

First Available: 2014-08-28

Amazon Price: $59.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Tilta Nucleus-M: Wireless Follow Focus | Lens Control System | WLC-T03

 Ean: 0680727786861   |    PartNumber: WLC-T03   |   Asin: B07K8CY1SC

Tilta Nucleus-M: Wireless Follow Focus | Lens Control System | WLC-T03 The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 miles! This makes it ideal for drone or car-mounted shots.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time.
Packing List
1.(1) Wireless FIZ hand unit
2.(2) Brushless wireless motors with 19mm rod support and 15mm rod bushings
3.(1) Right wireless handle, (1) Finger wheel (1) Zoom toggle
4.(1) Left wireless handle (1) Finger wheel
5.(4) Follow focus marking disks
6.(1) 74cm 7-pin to P-tap motor power cable
7.(1) 55cm 7-pin to 7-pin motor connection cable
8.(1) 18cm 7-pin to 7-pin motor connection cable
9.(2) Photographic lens follow focus adapters
10.(1) 18650 quad battery charger (batteries NOT included)
11.(2) Handle to Arri Standard Rosette adapters
12.(2) Handle to gimbal bar adapters (compatible with 25mm/30mm rod diameters)
13.(1) Wireless FIZ hand unit strap
14.(1) Hard shell waterproof safety case.

Features

  • Endless lens control options in the palm of your hand: The Nucleus-M allows you to wirelessly control the motors with either the FIZ hand unit or two handles. If desired, split the control between any of the possible control options for endless possibilities.
  • Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle.
  • Function as a one-person camera team & keep the form factor of your camera setup to a minimum
  • Control any lens: from small DSLR lenses to large cinema zoom lenses
  • possible control options for endless possibilities. Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle. Perform effortlessly accurate focus pulls: The hand unit offers an intuitive focus mark system that allows you to set marks that vibrate as the hand wheel passes them. Additionally, the hand unit and handles both offer programmable hard stops to al
  • See more on Amazon...

Brand: Tilta   |   Manufacturer: Tilta

Package Dimensions: 5.9 x 11.4 x 13.6 inches (15.0 x 29.0 x 34.5 cm)

Amazon Price: $1,199.00 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: | Used Price: $1,099.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Neewer A-B Stop Follow Focus with Quick Release and Gear Ring Belt Mount for DSLR Cameras Camcorder,Fits Shoulder Supports,Stabilizers,Movie Rigs,All 15mm Rod Mounts

Model: 10086928@@##1   |    Mpn: 10086928@@##1   |    Ean: 0699618402308   |    PartNumber: 10086928@@##1   |   Asin: B01GO3WOY6

Note:the camera and shoulder mount are not included!
description:
This Neewer follow focus can allows you adjust the lens focus precisely and experience an efficient and convenient shooting or video making!

features:
This A/B Hard stop enables precision focus ajustment,follow focus with quick release make mounting easily and quickly.
Grooved knob for slip-free control,A white marking disk can mark the focus point.
It allows mounted by both left and right side only if it is convenient for you.
Use gear drive to adjust camera focus in a more accurate and smooth way. Fits standard 15mm/0.59" rod mounts tightly.(60mm for center to center distance)
An adjustable gear ring belt is designed to fit less than 100mm lense diameters.

Specifications:
Material: Metal and plastic
Fits Rod:Standard 15mm/0.59" rod
Center-to-Center disdance for rod mount: 60mm
Suitable for: Camera lens of less than 100mm diameter

Package Contents:
1x Neewer Follow Focus For Customized Filmmaker System

Features

  • This A/B Hard stop enables precision focus adjustment,follow focus with quick release make mounting easily and quickly
  • Grooved knob for slip-free control,A white marking disk can mark the focus point
  • It allows mounted by both left and right side only if it is convenient for you
  • Use gear drive to adjust camera focus in a more accurate and smooth way. Fits standard 15mm/0.59 rod mounts tightly.(60mm for center to center distance)
  • An adjustable gear ring belt is designed to fit less than 100mm lense diameters
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 4.2 x 6 x 9.1 inches (10.7 x 15.2 x 23.1 cm)   |   Package Dimensions: 4.25 x 6.02 x 9.13 inches (10.8 x 15.3 x 23.2 cm)

Amazon Price: $59.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

MARSRE Pro Follow Focus with A/B Hard Stops and Flexible Gear Ring Belt for Canon Nikon Sony Panasonic and Other DSLR Video Cameras and DV Camcorders

Model: 10501603   |    Mpn: MS-10501603   |    Ean: 6927071660664   |    PartNumber: MS-10501603   |   Asin: B07D3LRNMG

The MARSRE Pro follow focus with two hard stops is compatible with Canon Nikon Panasonic Sony and other DSLR Video Cameras and DV Camcorders. The precision-machined Follow Focus system provides repeatable, accurate focusing. It allows an easy but precise tracking of the focus with two hard stops. Variable locking mechanism allows quick adjustment of start and end points. Gear-driven design for slip-free, accurate and repeatable focus movement. The follow focus gear ring belt can be mounted to any lens less than 100mm diameters. The focus wheel of the system is equipped with a white surface allowing you to mark and reproduce the focus area. The follow focus system can be mounted from both sides for left or right hand use. The Professional dslr follow focus is made of durable anodized black aluminum alloy and ABS. Features: Integrated A/B Hard stops for accurate focusing Flexible Gear Ring Belt compatible with most of the lenses Allow right and left operation Smooth Rotation on the Focus Gear Compact and lightweight Specification: Rail Distance: 60 mm Rail Diameter: 15 mm Gear Module: Industry Standard 0.8 Weight: 1.4 pounds/0.62kg Package dimentions: 7.87 x 4 x 4.4 inches Easily switchable to either side of camera Material: aluminium, ABS and Nylon Package Include: 1 x Follow focus with two hard stops 1 x Matching Gear ring belt

Features

  • Present the most innovative and needed function-Movable Focus Indicator. Easy begin/end setup for accurate and highly repeatable racking between your desired indicator location with 2 hard stops
  • Gear-driven design for slip-free, accurate, and repeatable focus movement. Can be mounted from both sides. Variable locking mechanism allows quick adjustment of start and end points
  • The follow focus system fits industry standard 15mm rod rail system and 60mm center to center distance. Adjustable slide-mounting mechanism to fit large range of lens diameters
  • This dslr follow focus is compatible with Canon Nikon Panasonic Sony and other DSLR Video Cameras and DV Camcorders. Gear ring belt suitable for less than 100mm diameters lens
  • Sturdy aluminium alloy CNC Machined. Flexible Gear ring belt included. Weight: 1.4 pounds/0.62kg. Package dimentions: 7.87 x 4 x 4.4 inches
  • See more on Amazon...

Brand: MARSRE   |   Manufacturer: MARSRE

Item Dimensions: 4.4 x 4 x 7.87 inches (11.2 x 10.2 x 20.0 cm)   |   Package Dimensions: 4.4 x 4.8 x 8.6 inches (11.2 x 12.2 x 21.8 cm)

Amazon Price: $49.99 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Neewer Follow Focus CN-90F with Gear Ring Belt for DSLR Cameras of 65mm-103mm Lens Diameter Such as Nikon,Canon,Sony DV/Camcorder/Film/Video Cameras,Fits 15mm Rod Mounts,Shoulder Supports

Model: 10069149   |    Mpn: 10069149   |    Ean: 0887662290204   |    PartNumber: 10069149   |   Asin: B00G34QGAU

Description: This follow focus finder takes an important function in film shooting. Film movie camera lenses are manually focus. Cause there are many scenarios need to constantly change the focus. It's very inconvenient to operate the lens directly. So the follow focus finder provides a greater convenience. The follow focus finder can let you shoots precisely, focus precisely and operate smoothly. Whether you're shooting with a fixed-lens camcorder, interchangeable cinema lens, or a video-capable DSLR camera, this machine will provide repeatable and accurate focusing.

Package Contents:

1 x Follow focus

1 x Focus Ring Gear

2 x Extension

2 x Fixing Screw

Features

  • Completely gear driven design for slip-free and accurate movement.
  • Ideal for video taking with HDSLR cameras such as Canon EOS 600D, 60D, etc.
  • Adjustable locking system. Gear drive can be mounted from either side
  • Improved design, with a pair of stops on the ring for adjustable focus indication. You can control follow focus in desired range by setting the stops, and so for desired focal lengths.
  • Compatible with all DSLR cameras, video cameras, HDV, DV, specially for HDSLR camera with movie function.
  • See more on Amazon...

Brand: Neewer   |   Manufacturer: Neewer

Item Dimensions: 3.7 x 5.12 x 7.2 inches (9.4 x 13.0 x 18.3 cm)   |   Package Dimensions: 3.7 x 4.9 x 7.1 inches (9.4 x 12.4 x 18.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Phone Lens 3 in 1 Camera Lens Kit by Zeso | Professional 230 Fisheye, Macro & Wide Angle Phone Lenses | for iPhone, Samsung Galaxy, Android, iPads, Tablets | Hard Storage Case & Universal Phone Clip

Model: 4332042663   |    Mpn: AK-009   |    Ean: 0049047353625   |    PartNumber: AK-009   |   Asin: B01N4O8QBV

Would you like to take professional photos with your phone ?

- Are you fed up taking blurry pictures ? - Looking for better quality phone pictures? We have specially designed 3X1 Lens kit

Great for making you the most professional photographer - High performance iphone lens attachments for any cell phone camera lens- Easily screw

Now...Why choose our Lens kit?

It's your daughter birthday and your whole family is excited for it. Everything is just ready and the table is set beautifully. Now is the time to take pictures, your iphone pictures are blurry & you can't put all of the family with the table in it. DAMMM. What do we do now ?

Is it the perfect time to use our 3X1 lens kit?

- definitely!! Our Lens set include high end quality lenses which makes your pictures just in the way you wanted it to look- Bright, Sharp, Wide.

Notes:

1. Macro Lens and the Wide angle Lens are attached together while you receive them To use the macro lens, unscrew the wide angle lens 2. Make sure the phone is parallel with the lens- no gap

Our kit includes Premium lenses:


- Wide lens 0.63X:capable of capturing more in the frame to have a "wider" field of view
- Macro lens 15X: Shoot close up photos at a distance in from your object. take a Closer Look- 15X zoom lens magnification
- Enhanced 230 degree Fish Eye Lens: The best range it the market today! Our competitors usually sell the 180 or 198 degree- take funny pictures in a wider range
- Wireless Remote Control: With free shutter control. Perfect for taking selfies, Long distance use
"The Zeso lens kit is fun & easy to use for all ages and all mobile phones. The perfect present for all, everyone who has it is highly satisfied!!"
12 Month Warranty

- 100% satisfaction guaranty Don't think no more..you must take it now!!

- Just click add to carts & it's yours

Features

  • New Design Phone Lenses Camera Lens Kit By Zeso: 3-in-1 Clip On Lenses + Wireless Remote Control And Customized Hard Case. A Special Accessories That Fit To All Smartphone's
  • 3-in-1 Cell Phone Lens kit: Improved External Lenses- 0.63X WIDE ANGLE + 15X MACRO LENS +Enhanced 230 degree Super FISH EYE - HD Camera
  • Wireless Remote Control: With free shutter control. Fits as a Iphone remote control an all cell phone Remote. Use It With The IPhone Attachable Lenses And Your Phone Camera Can Be Used As A Selfie Lens
  • Newly designed 38mm Universal Durable Clip - Perfectly fits all Mobile Phone Camera Lens : Iphone 7 lens, Samsung Galaxy lens, Nexus camera lens, Sony lens, HTC camera lens, or any other cell phone
  • It all comes in a specially designed hard case & soft bag by ZESO with a shackle, so you can carry it where ever you want. The Perfect IPhone Accessories And Unique Gift For Any Occasion
  • See more on Amazon...

Brand: Zeso lens   |   Manufacturer: Zeso

Package Dimensions: 1.5 x 3.3 x 4.5 inches (3.8 x 8.4 x 11.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Water-chestnut Extendable Telescoping Back Scratcher Stainless Steel Handy Pocket Pen Clip

 Ean: 6922912533206   |   Asin: B07X9QMMKK

Features:
Extendable design reaches from 6-1/2 to 20 inches.Head Dimension : 3.2 x 3.1cm / 1.26" x 1.22"(L*W);Handle Diameter : 1.0cm/ 0.39".
A telescopic bear claws metal back scratcher is your best choice for getting relief to troublesome itchy spots.
A must for anyone who wants to scratch those hard to reach areas(unreachable itch).
Can be your scalp massager, head massager, back massager, foot massager and so on.
Suitable for men, women and kids. Comes in different colors, confusion of one person using the others adjustable back scratcher.

Specifications:
Material:Stainless Steel
Color:Sliver
Size: 18cm, stretch length 53cm

Package included:
1 x Back Scratcher

Features

  • Extendable design reaches from 6-1/2 to 20 inches.Head Dimension : 3.2 x 3.1cm / 1.26"" x 1.22""(L*W);Handle Diameter : 1.0cm/ 0.39"".
  • A telescopic bear claws metal back scratcher is your best choice for getting relief to troublesome itchy spots.
  • A must for anyone who wants to scratch those hard to reach areas(unreachable itch).
  • Can be your scalp massager, head massager, back massager, foot massager and so on.
  • Suitable for men, women and kids. Comes in different colors, confusion of one person using the others adjustable back scratcher.
  • See more on Amazon...

Brand: Water-chestnut   |   Manufacturer: Water-chestnut

Amazon Price: $2.39 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Tilta Nucleus-M: Wireless Lens Control System, Partial Kit I | Follow Focus | WLC-T03-K1

Model: WLC-T03-K1   |    Mpn: WLC-T03-K1   |    Ean: 0631384550210   |    PartNumber: WLC-T03-K1   |   Asin: B07YXN6SGL

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 miles! This makes it ideal for drone or car-mounted shots. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don?t have hard end stops at close focus and infinity. The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.

Features

  • Endless lens control options in the palm of your hand: The Nucleus-M allows you to wirelessly control the motors with either the FIZ hand unit or two handles. If desired, split the control between any of the possible control options for endless possibilities.
  • Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle.
  • Perform effortlessly accurate focus pulls: The hand unit offers an intuitive focus mark system that allows you to set marks that vibrate as the hand wheel passes them. Additionally, the hand unit and handles both offer programmable hard stops to allow you to easily focus between a pre-selected range.
  • Function as a one-person camera team & keep the form factor of your camera setup to a minimum
  • Control any lens: from small DSLR lenses to large cinema zoom lenses
  • See more on Amazon...

Brand: Tilta   |   Manufacturer: Tilta

Item Dimensions: 6 x 11.5 x 14.5 inches (15.2 x 29.2 x 36.8 cm)   |   Package Dimensions: 5.16 x 8.62 x 12.72 inches (13.1 x 21.9 x 32.3 cm)

Amazon Price: $599.00 | as of 11/12/2019(11:18am pst)
Availibility:
List Price: $599.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Tilta Nucleus-M: Wireless Lens Control System, Partial Kit IV | Follow Focus | WLC-T03-K4

Model: WLC-T03-K4   |    Mpn: WLC-T03-K4   |    Ean: 0631384550241   |    PartNumber: WLC-T03-K4   |   Asin: B07YXN6T1X

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 miles! This makes it ideal for drone or car-mounted shots. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don?t have hard end stops at close focus and infinity. The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.

Features

  • Endless lens control options in the palm of your hand: The Nucleus-M allows you to wirelessly control the motors with either the FIZ hand unit or two handles. If desired, split the control between any of the possible control options for endless possibilities.
  • Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle.
  • Perform effortlessly accurate focus pulls: The hand unit offers an intuitive focus mark system that allows you to set marks that vibrate as the hand wheel passes them. Additionally, the hand unit and handles both offer programmable hard stops to allow you to easily focus between a pre-selected range.
  • Function as a one-person camera team & keep the form factor of your camera setup to a minimum
  • Control any lens: from small DSLR lenses to large cinema zoom lenses
  • See more on Amazon...

Brand: Tilta   |   Manufacturer: Tilta

Item Dimensions: 6 x 11.5 x 14.5 inches (15.2 x 29.2 x 36.8 cm)   |   Package Dimensions: 5.39 x 8.62 x 12.32 inches (13.7 x 21.9 x 31.3 cm)

Amazon Price: $799.00 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: $799.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Tilta Nucleus-M: Wireless Lens Control System, Partial Kit III | Follow Focus | WLC-T03-K3

Model: WLC-T03-K3   |    Mpn: WLC-T03-K3   |    Ean: 0631384550234   |    PartNumber: WLC-T03-K3   |   Asin: B07YXN2Z23

The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 miles! This makes it ideal for drone or car-mounted shots. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that don?t have hard end stops at close focus and infinity. The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.

Features

  • Endless lens control options in the palm of your hand: The Nucleus-M allows you to wirelessly control the motors with either the FIZ hand unit or two handles. If desired, split the control between any of the possible control options for endless possibilities.
  • Small, compact hand unit that offers 3-axis control: Control focus, iris, and zoom with the small, form-fitted hand unit. The iris wheel can also be set to act as a speed control for the zoom toggle.
  • Perform effortlessly accurate focus pulls: The hand unit offers an intuitive focus mark system that allows you to set marks that vibrate as the hand wheel passes them. Additionally, the hand unit and handles both offer programmable hard stops to allow you to easily focus between a pre-selected range.
  • Function as a one-person camera team & keep the form factor of your camera setup to a minimum
  • Control any lens: from small DSLR lenses to large cinema zoom lenses
  • See more on Amazon...

Brand: Tilta   |   Manufacturer: Tilta

Item Dimensions: 6 x 11.5 x 14.5 inches (15.2 x 29.2 x 36.8 cm)   |   Package Dimensions: 5.31 x 8.54 x 12.4 inches (13.5 x 21.7 x 31.5 cm)

Amazon Price: $599.00 | as of 11/12/2019(11:18am pst)
Availibility: Usually ships in 24 hours
List Price: $599.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

edelkrone FocusONE Follow Focus Unit

Model: Focus ONE   |    Mpn: FocusONE   |    Ean: 0850988007405   |    PartNumber: FocusONE   |   Asin: B07WPXS87S

The edelkrone FocusONE Follow Focus Unit is a single rod-based follow focus unit that mounts the marking disk between the handwheel and the drive gear, which provides for extremely precise focus marks. The design of the unit allows you to adjust the handwheel to almost any position without affecting the unit's performance. This allows you to adjust the handwheel for your comfort, and this feature even allows you to pull focus from above or below the camera without forcing your hand into an uncomfortable position or needing to use an available focus whip. The unit can also adjust to accommodate pulling focus with virtually any diameter lens that you can use with 15mm support rods, or with 19mm studio rods by using available 19mm to 15mm rod adapters.

The FocusONE features laser inscribed markings and a marking disk with its own index line. The construction of the unit places the marking disk between the gearbox and the lens drive gear, providing the marking disk with an accurate reading and no play between marking disk and lens drive gear. The disk faces the operator, giving additional confirmation to the operator that the lens is at the proper mark. Adjusting the marking disk is simple, just set the lens where you want it, rotate the disk to the index mark you wish, and you are ready to change focus and come back to the mark you set. The marker disk is made from plastic, and you can place additional index marks on it with available temporary markers of your choice.

Box Contains

edelkrone FocusONE Follow Focus Unit
Limited 1-Year Warranty

Features

  • The single 15mm rod mount design allows you to mount the FocusONE on either side of the lens, or even from above, if your rod system features a rod above the lens.
  • The handwheel position is adjustable, so you can adjust it for your comfort.
  • The adjustable design of the unit allows it to work with virtually any diameter lens.
  • The marker disk is extremely accurate as it is positioned between the gearbox and the lens drive gear, and not subject to play that may be found with some other focus units.
  • The marker disk is easily viewed by the camera operator, allowing the operator to make precise focus pulls.
  • See more on Amazon...

Brand: edelkrone   |   Manufacturer: edelkrone

Package Dimensions: 5.2 x 7.4 x 7.6 inches (13.2 x 18.8 x 19.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Feiyu Follow Focus II for AK Series Gimbals (Renewed)

 Ean: 0714752504678   |    PartNumber: FY A046-cr   |   Asin: B07XCYKT28

Features

  • Follow Focus - Lens Gear - Type C USB Data Cable - Clip - Hex Wrench - Aluminium Stick - Crabon Fiber Stick - 2x Screws - Feiyu 1 Year Limited Warranty
  • Follow focus with Brushless Motor
  • Compatible with FeiyuTech AK2000 and AK4000 gimbals
  • It can be controlled adjusting the gimbal knob
  • It allows for fine control over focus
  • See more on Amazon...

Brand: Feiyu   |   Manufacturer: Feiyu

Package Dimensions: 1.34 x 2.4 x 7.44 inches (3.4 x 6.1 x 18.9 cm)

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Water-chestnut Extendable Telescoping Back Scratcher Stainless Steel Handy Pocket Pen Clip
  2. Tilta Nucleus-M: Wireless Lens Control System, Partial Kit I | Follow Focus | WLC-T03-K1
  3. Tilta Nucleus-M: Wireless Lens Control System, Partial Kit IV | Follow Focus | WLC-T03-K4
  4. Tilta Nucleus-M: Wireless Lens Control System, Partial Kit III | Follow Focus | WLC-T03-K3
  5. edelkrone FocusONE Follow Focus Unit
  6. Feiyu Follow Focus II for AK Series Gimbals (Renewed)

Most Wished For

  1. JJC Professional Camera Lens Auto Focus Calibration Tool Chart,Help Fine Tune Focus of Lens via Sele...
  2. Tilta Nucleus-Nano Wireless Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirro...
  3. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  4. Tiltamax Nucleus-Nano: Wireless Lens Control System, None
  5. Movo F2X Precision Follow Focus System with Hard Stops and 65mm, 75mm, 85mm Adjustable Gear Rings
  6. Neewer A-B Stop Follow Focus C2 with Gear Ring Belt for DSLR Cameras Such as Nikon,Canon,Sony DV/Cam...
  7. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  8. Tilta Nucleus-M: Wireless Follow Focus | Lens Control System | WLC-T03
  9. Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcord...

Most Gifted

  1. Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcord...
  2. Neewer A-B Stop Follow Focus C2 with Gear Ring Belt for DSLR Cameras Such as Nikon,Canon,Sony DV/Cam...
  3. Neewer A-B Stop Follow Focus with Quick Release and Gear Ring Belt Mount for DSLR Cameras Camcorder,...
  4. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  5. MARSRE Pro Follow Focus with A/B Hard Stops and Flexible Gear Ring Belt for Canon Nikon Sony Panason...
  6. Neewer Follow Focus CN-90F with Gear Ring Belt for DSLR Cameras of 65mm-103mm Lens Diameter Such as ...
  7. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  8. JJC Professional Camera Lens Auto Focus Calibration Tool Chart,Help Fine Tune Focus of Lens via Sele...
  9. Phone Lens 3 in 1 Camera Lens Kit by Zeso | Professional 230° Fisheye, Macro & Wide Angle Phone ...
  10. Movo FR3 Adjustable Follow Focus Ring Set of 3 with 65mm, 75mm and 85mm Lens Gear Rings (Standard 32...

Top Selling

  1. JJC Professional Camera Lens Auto Focus Calibration Tool Chart,Help Fine Tune Focus of Lens via Sele...
  2. Tilta Nucleus-Nano Wireless Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirro...
  3. DSLRKIT 28X18cm Lens Focus Calibration Tool Alignment Ruler Folding Card (Pack of 2)
  4. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...
  5. Neewer Follow Focus with Single 15mm Rod Clamp,Adjustbale Gear Ring Belt for DSLR Cameras/DV/Camcord...
  6. Movo FR3 Adjustable Follow Focus Ring Set of 3 with 65mm, 75mm and 85mm Lens Gear Rings (Standard 32...
  7. FOTGA DP3000 M1 DSLR Follow Focus with Flexible Gear Belt for 15mm Rail Rod Rig for DSLR HDSLR DV 5D...
  8. Fotga 18" Flexible Whip Speed Crank for Follow Focus FF Standard 12mmx12mm Port
  9. Movo Photo FF200 Manual Follow Focus, Zoom Control Lever Lens Clamp for DSLR Video Cameras
  10. Neewer Follow Focus with Gear Ring Belt for Canon Nikon Sony and Other DSLR Camera Camcorder DV Vide...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.