Frontpage > Electronics > Music Equipment > Guitar Tools

Best Guitar Tools - Buying Guide

Last Updated: 03/23/2019

Share on

Bestselling Guitar Tools on Amazon

  1. D Addario Accessories Pro-Winder Guitar String Winder and Cutter All-In-1 Restringing Tool Inclu...
  2. Guitar Bridge Saddle Nut Files Set - 13 Different Size Stainless Steel Needle Files with Circular Cr...
  3. FretGuru 2 Precision 8-in-1 String Action Gauge Fret Rocker Guitar Setup Ruler Luthier Tool guitaris...
  4. Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret...
  5. UPGRADE iLuiz Guitar Neck Notched Straight Edge Luthiers Tool for Gibson Fender and Most of Guitar F...
  6. Baroque Diamond Guitar Fret Crowning Dressing File Narrow/Medium/Wide 3 Edges Guitar Repairing & Lut...
  7. SIREN: String Action Gauge - Guitar Setup Ruler - Luthier Tool
  8. String Swing Guitar Hanger - Holder for Electric Acoustic and Bass Guitars - Stand Accessories Home ...
  9. Ernie Ball Musician's Tool Kit
  10. FretGuru Ultimate Fret End File 2 - Fix Sharp Fret Ends, Fret Sprout, Fret End Dressing File Pro Lut...

  #1

D Addario Accessories Pro-Winder Guitar String Winder and Cutter All-In-1 Restringing Tool Includes Clippers, Bridge Pin Puller, Peg Winder Designed to Fit Most Guitars

Model: DP0002   |    Mpn: FBA_DP0002   |    Ean: 5055266700930   |    PartNumber: FBA_DP0002   |   Asin: B0002E1G5C

Planet Waves Pro Winder String Winder and Cutter Planet Waves Pro-Winder Planet Waves Pro-Winder Most ordinary peg winders serve the single basic purpose of winding the tuning pegs of a guitar during string changes, but the Planet Waves Pro-Winder isn't any ordinary peg winder.

One and Done The ergonomic design of the Pro-Winder makes string changes easier than ever before with it's built-in clippers, bridge pin puller, and peg winder all rolled into one product. The peg winder is also designed to fit on virtually all guitars, banjos, and mandolins, truly making it a must have for every instrument case.

Covering All the Basses The patented Pro-Winder design is also available for bass guitar. With a handle designed for efficient and comfortable use and a peg winder that fits both vintage and modern basses, the Bass Pro-Winder has you covered. The hardened steel clippers are also tough enough to cut through bass strings with ease.


Planet Waves Pro-Winder for Guitar Pro-Winder For Guitar Designed to work for a wide variety of fretted instruments, the Pro-Winder for guitar is a perfect all-in-one tool for every player to keep in their gig bag or case. The Pro-Winder is the Swiss Army knife of string changing.

Planet Waves Pro-Winder for Bass Pro-Winder For Bass The Bass Pro-Winder takes the user friendly and ergonomic elements of the original Pro-Winder and makes them applicable for both vintage and modern bass guitar tuning pegs.

The Pro-Winder String Cutter Cutting Through With the hardened steel clippers on the Pro-Winders string cutter you can cut through your old strings to make removing them quicker, and trim the excess off of new strings after looping them through the tuning machines.

The Bass Pro-Winder String Cutter Making The Cut When it comes to bass guitar you are dealing with some pretty heavy gauge strings. The good news is that the hardened steel clippers of the Bass Pro-Winders string cutter are specifically designed to easily cut through the thickest of strings.

The Pro-Winder Bridgepin Puller Pull The Pin Designed with acoustic guitarists in mind, the Pro-Winder also has a built in bridgepin puller. This makes removing stubborn pins simple without risking damage caused by pliers and other tools.

The Bass Pro-Winder In Use Wind Away The Bass Pro-Winder is designed to seat itself on a variety of peg winder sizes and shapes. The spinning head and comfortable handle make changing bass strings a much simpler and efficient process.

Features

  • ALL-IN-ONE RESTRINGING TOOL - The ergonomic and high-quality design of the D'Addario Accessories Pro-Winder makes string changes quicker and easier than ever before with its built-in clippers, bridge pin puller and peg winder all rolled into one tool.
  • MUST HAVE FOR EVERY CASE - Why fill up your case with three tools when you can have one that does it all? This indispensable tool has been designed to fit comfortably in your hand and for use on virtually all electric and acoustic guitars, basses, banjos and mandolins. Also available in a bass guitar version.
  • BUILT-IN STRING CUTTER - With the hardened steel clippers on the Pro-Winder string cutter you can cleanly cut through your old strings to remove them quicker and easier, and trim the excess off new strings after looping them through the tuning machines.
  • INTEGRATED BRIDGE PIN PULLER- Designed with acoustic guitarists in mind, the Pro-Winder has a built-in bridge pin puller. This makes removing stubborn pins simple without risking damage caused by pliers and other tools.
  • MADE IN THE USA - D'Addario Accessories is known for innovative, problem-solving, quality musical accessories that are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
  • See more on Amazon...

Brand: D'Addario Accessories   |   Manufacturer: D'Addario &Co. Inc

Item Dimensions: 8.74 x 0.98 x 2.99 inches (22.2 x 2.5 x 7.6 cm)   |   Package Dimensions: 0.6 x 1.5 x 7.3 inches (1.5 x 3.8 x 18.5 cm)

First Available: 2009-01-12

Amazon Price: $5.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99 | Used Price: $22.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Guitar Bridge Saddle Nut Files Set - 13 Different Size Stainless Steel Needle Files with Circular Cross Section and 9 Pcs Sand Paper For Acoustic Guitar, Ukulele, Bass, Electric Guitar - Leomanor

Model: 4334260647   |    Mpn: GT-02-BO   |    Ean: 0190907507280   |    PartNumber: GT-02-BO   |   Asin: B01LQO3GGS




Don't endure the terrible hand feeling of your guitar again and again. Now, we have profession tools to adjust your guitar for the best hand feel.




About The Steel Stainless Files:
This is a handy set of round files, originally intended for cleaning the tips of torch welders, but absolutely perfect for filing string slots into nuts and bridges! The self-contained set features a range of 13 sizes( from 0.4mm - 1.6mm). Unlike most standard tip cleaners, these feature longer shaft length with 25mm grinding length and 30mm length of the hilt, which makes them easier to use for filing string slots.
Please Note: These files, especially the smaller ones, are thin diameter and bend easily. As such, some care is recommended when using them, so that they will last you a good while.

About The Sand Paper
The Sand Paper let you can adjust the high of your saddle and nut anytime, you can use it polish the finger board, fret, side, strings etc also.
Size: 70mm*90mm
Quantity: 9 pcs (3 pcs 320 grit, 6 pcs 240 grit).
Please note: the size pure manual survey, has the error slightly.

Package Include:
1 * 13 Size Steel Stainless Files
9 * Sand Paper (3 pcs 320 grit, 6 pcs 240 grit)

If you have always had trouble getting your string just right, or want get the best high of your saddle and nut, pick up one of these and give them a try!


































Features

  • Stainless Steel Files: Made of high-quality steels, perfect tools filing string slots into nut and bridge. PINS PULLER: made of ABS, for Pull out the string pegs.
  • Files Size: 0.4mm / 0.5mm / 0.6mm / 0.7mm / 0.75mm / 0.8mm / 0.9mm / 1.0mm / 1.05 mm / 1.1mm / 1.2mm / 1.4mm / 1.6 mm, 25mm grinding length and 30mm length of the hilt.
  • These longer-shaft files are easier to use than the shorter ones commonly available at home improvement stores
  • Sand Paper: 9 pcs (3 pcs 320 grit, 6 pcs 240 grit). For polish saddle, nut, string and so on.
  • Sand Paper Size 70mm*90mm DEAR BUYERS PLEASE NOTE: THE Leomanor bridge saddle nut files was ONLY SOLD BY Leomanor, other sellers are fake and inferior products. We have nothing to do with them if you buy unqualified products from them, please complain to Amazon.
  • See more on Amazon...

Brand: Leomanor   |   Manufacturer: Leomanor

Package Dimensions: 0.5 x 3.5 x 5 inches (1.3 x 8.9 x 12.7 cm)

Amazon Price: $5.92 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

FretGuru 2 Precision 8-in-1 String Action Gauge Fret Rocker Guitar Setup Ruler Luthier Tool guitarist gift -BLACK DIAMOND- Super Precise CNC Machined, Diamond Honed, Polished Edge = NO SCRATCHED FRETS

Model: Fre-7925   |    Ean: 0617209380118   |   Asin: B00HG29EYI

The advanced new FretGuru 2 is shipping now. This is version 3.0 - New from the ground up - 8+ function design. Faster and more precise guitar setup guaranteed!

When you receive your FretGuru 2 and tear open the package, you'll marvel at the silky smooth edges that are first carefully CNC machined and beveled, then diamond honed and polished by hand (by me).

Overkill? Maybe for some, but after years of frustration dealing with ragged edged rulers and action gauges leaving scratches in my and my customer's freshly polished frets... maybe you're in a similar place, and no longer willing to accept this damage either. We sold out the original version FretGuru far sooner than expected, and it would have been easy to just run another batch, but we're not looking for "easy".

We've received some killer input from the worlds top luthiers, and the ideas were so good that we HAD to include them on the new design. And we've made it more sexy too.

Since the FretGuru 2 has been such a hit with our fellow guitar geeks out there, we wanted to create something special to really kick it up to another level.

So we've been working with a local craftsman to create these sweet 100% handmade in USA leather cases for a few special FretGuru fans.

You can see the Amazon listing for the actual leather cases by typing " fretguru leather case " (no quotes) in the search box, or check out listing # B00SY1UXD6.

These are ridiculously expensive and time consuming to make, but I wanted to give you a shot at having one for your own FretGuru 2... while they last.

.


It's a pretty sweet deal. Check out the testimonials in the leather case listing.

Features

  • Precise string action gauge in .010" (ten thousandths of an inch) number increments, and .005" line increments = super accurate guitar setup! The markings are NOT printed - they are actually laser etched through the black surface, deeply into the stainless metal. No printing to rub off! Also check out the new, precision 64ths string action gauge. The accuracy of the FretGuru 2 will bring your guitar out of the realm of woodworking and into another world of playability.
  • Unique, first of it's kind fret height/fret wear gauge in .005 increments. No more fumbling with calipers, straightedges or feeler gauges.
  • Fret rocker! The 3 unequal length sides are CNC machined, precision diamond honed and polished. Now you can find that pesky high fret without scratching your frets.
  • Another first - the uniquely designed Nut Slot Height gauge, which has already been a massive time-saver here on the workbench.
    You'll notice the silver square on the bottom corner of the gauge. This corner is designed and engineered to be just under .010 thick, which allows it to slip into each nut slot - including the narrow high e slot.
  • Simply rest the thin corner into the bottom of each nut slot - and the other end across to the 2nd fret, then measure the gap as the gauge passes over the 1st fret. It's never been easier to zero in on the perfect string height as it leaves the nut.

    Also, be sure to check out the separate listing for the sweet handmade custom leather case! Double click on the photos for the expanded view.

  • See more on Amazon...

Brand: FretGuru   |   Manufacturer: FretGuru

Package Dimensions: 0.5 x 3.9 x 6.6 inches (1.3 x 9.9 x 16.8 cm)

Amazon Price: $28.87 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret Rocker, 2 Pcs Fingerboard Guards Protectors and 2 Grinding Stone for Guitar

 Ean: 8011603944587   |    PartNumber: 43528-47320   |   Asin: B07MJV8XG1

Manufactured designs:
This luthier tool set is designed to help with the common repairs and adjustments of guitar fret. Fingerboard guards are made of stainless steel, strong and sturdy. An indispensable tool both for guitar technicians and guitar players.

Characteristic:
The luthier tool set is created to help complete the most common guitar clean and polish. It includes some of the most useful, popular and sought-after tools for clean and polish.

Multi-function:
Not only applied for guitar, but also can be applied for other things, like Ukulele and Bass. Great gift for guitarists who maintain their guitars.

Specification:
Fret file:
Color: silver and orange
Material: stainless steel and rubber
Size: 18.5 x 1.5 cm/ 7.3 x 0.6 inch (L x W)

Fingerboard guards:
Material: stainless steel
Size: 3 x 0.8 inch and 3 x 0.5 inch
Guitar fret rocker leveling tool:

Material: stainless steel
Color: steel color
Size: 10.3 x 5.1 cm/ 4 x 2 inches
Thickness: 2 mm/ 0.08 inch
4 side size: 4 inches/ 10.3 cm, 2.9 inches/ 7.5 cm, 2 inches/ 5 cm, 1.3 inches/ 3.3 cm

Grinding stone:
Material: 2 x grinding stone
Color: Light green, Orange
Size: 3.9 x 0.4 inch/ 10 x 1.1 cm

Package includes:
1 x Guitar fret crowning file
2 x Fingerboard guard
1 x Guitar fret rocker leveling
2 x Grinding Stone

Features

  • Guitar luthier tool set includes - 1 x guitar fret crowning file, 2 x fingerboard guard and 1 x guitar fret rocker leveling,2 x Grinding Stone, Suitable for Luthier, String Instruments User, Guitar, DIY for many fret works.
  • FRET FILE - Made of stainless steel, with ergonomic rubber handle for comfortable holding. Size: filing surface is 4 inches in length, rubber handle is 3.2 in length; which is applied to narrow fret crowning after leveling
  • FRET ROCKER - Made of stainless steel and has 4 flat and straight edges, which can help your to detect any discrepancy existing in frets height
  • FINGERBOARD GUARD with Grinding Stone - Designed to protect your guitar or bass fretboard from scratching or damaging while filing and polishing
  • Easy and safe way to polish and clean guitar frets; If you have anything unclear about these Guitar Clean and Polish Tools Set, welcome to contact us at anytime. We will reply you within 24 hours
  • See more on Amazon...

Brand: NeeQi   |   Manufacturer: NeeQi

Package Dimensions: 0.71 x 4.49 x 7.99 inches (1.8 x 11.4 x 20.3 cm)

Amazon Price: $13.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

UPGRADE iLuiz Guitar Neck Notched Straight Edge Luthiers Tool for Gibson Fender and Most of Guitar Fretboard and Frets

Model: 4334260534   |    Mpn: HSKh-02-HSI   |    PartNumber: HSKh-02-HSI   |   Asin: B0776RBZF1

This time, we synthesized 25.5 and 24.75 scale guitar, and precisely adjusted the distance of the notched, let it not just fit fender and gibson, also for others. Fit more guitars than other neck straight edge. And you can use side of notched for fingerboard straightness check, and side of complete for fret wires levelness check.


How to use?
Because of the strings tension, finger board was a little Bend was correct, the standard was 0.2mm(about two piece of paper) between lowest and highest, and the lowest place near from 10th fret. If you just want check the finger board was straight or not, or check the levelness of the fretwires, you needn t take down or release the strings, but if you find the neck was not enough straight and want adjustment, please release the string at first, then adjust the screw in the guitar body.


Others:

Material: 6061 Aluminium
Suitable: for Fender(25.5") & for Gibson(24.75")and most of others guitar
Item Size: 16.9 * 1.2 * 0.08 (430mm * 30mm * 2mm)
weight: 3.53 oz (100 g)

Package List:
1 * iLuiz Guitar Neck Straight Edge





























































































Features

  • Synthesized 25.5" and 24.75" scale guitar, and precisely adjusted the distance of the notched, let it not just fit fender and gibson, also for others. Fit more guitars than other neck straight edge.
  • Use side of notched for fingerboard straightness check, and side of complete for fret wires levelness check.
  • Size: 16.9 * 1.2 * 0.08 (430mm * 30mm * 2mm); weight: 3.53 oz (100 g)
  • Made of 6061 Aluminium with nice oxidation blasting treatment.
  • Precise machined edges and laser engraving.
  • See more on Amazon...

Brand: iLuiz   |   Manufacturer: Leomanor

Package Dimensions: 0.12 x 1.1 x 17.24 inches (0.3 x 2.8 x 43.8 cm)

Amazon Price: $16.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Baroque Diamond Guitar Fret Crowning Dressing File Narrow/Medium/Wide 3 Edges Guitar Repairing & Luthier Tools (Upgrade Version)

 Ean: 0653437056128   |    PartNumber: 43528-101088   |   Asin: B07CMZVJSN

This products are guaranteed with ONE YEAR for refund/replacement.
Please just contact with the seller if you have meet any quality problems.Thank you.

Description
The most advanced and precision fret end dressing file available - designed from the ground up specifically for fret ends - this is your most effective weapon in the battle against sharp fret ends, " fret sprout ", and a must-have for a smoother, faster playing guitar that inspires you to play more often.

Features:
100% brand new and high quality
Material: Made of Carbon Tool Steel T12 + Wood
Products Size:220X18X18MM
Net/Gross:Weight:150/170g

Package Includes
Fret File x 1
Nylon Oxford Bag x1

ONE YEAR warranty.

Features

  • Made by Carbon Tool Steel.Diamond file&Concave in center,very efficient&time saving for dressing the fret.
  • Very good quality fret file dressing tool, it can be used for stringed musical instruments such as electric guitar, acoustic guitar ,bass, Ukulele etc.
  • The file has 3 different sizes edges, for narrow frets, medium frets and wide frets.Fit for most fret specification on the markets.
  • Wood handle for convenient and comfortable use.Packed with individual Nylon Oxford Bag,very portable.
  • [PLEASE NOTE]:It is a rough diamond file.The main function is to cut the extra fret efficient.After using this tool it need the basic polish work by using different size of sand paper to polish the fret until it is smooth.
  • See more on Amazon...

Brand: Baroque   |   Manufacturer: Baroque

Package Dimensions: 0.4 x 1.6 x 9.2 inches (1.0 x 4.1 x 23.4 cm)

Amazon Price: $25.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

SIREN: String Action Gauge - Guitar Setup Ruler - Luthier Tool

Model: .   |    Mpn: .   |    Ean: 0600151029792   |    PartNumber: .   |   Asin: B076PN1263

The SIREN String Action gauge is an essential tool for setting up and repairing a variety of stringed instruments, including Guitar, Bass, Banjo, Ukulele and Mandolin. Three individual scales in both Inches and Millimeters allow you to measure and adjust:

- String Height - Bridge Height - Nut Slot Depth - Bridge Slot Depth - Pickup height

The Siren String Action Gauge uses laser engraving on the stainless-steel tool to ensure the measurements and scales do not wear off with repeated use. This process guarantees precision and accuracy. The quality of our product speaks for itself. This is unlike other String Action Gauges available, as most of the available gauges uses a silk-screening technology, which has a tendency to wear with use.

The SIREN String action gauge has a 0.30 mm thickness, smooth edges and rounded corners, these key features prevent scratching and damage to your instrument. Unlike many other String Action Gauges which have thin, sharp edges, as well as sharp pointed corners risking damage to your instrument.

Whether you are experienced in guitar repair, or a hobbyist who prefers to set up your instrument at home. The SIREN String Action Gauge is the perfect tool to quickly, safely and accurately set up and adjust all stringed instruments. Dimensions: 86mm x 54mm x 0.30mm / 3.38in x 2.12in x 0.012in (L x H x W) Weight: 11 grams

Features

  • MULTIPLE APPLICATIONS: Measures String Height, Bridge Height, Saddle Slot Depth, Nut Slot Depth and Pickup Height on a variety of stringed instruments including Guitar, Bass, Ukulele, Banjo and Mandolin.
  • NO SHARP EDGES: The SIREN String Action Gauge has a small, lightweight, pocket-sized design with a 0.30 mm thickness. Rounded corners and smooth finished edges ensure your instrument will be safe from scratches and damage.
  • METRIC & IMPERIAL: Includes measurements in both Inches and Millimeters. Equipped with a convenient Conversion Chart printed on the rear side of the Gauge. Providing Fraction (Inches) to Decimal (Inches) to Metric (Millimeters) conversions.
  • PRECISE MEASUREMENTS: The engraved white measurements/scales on the matte black card provide an excellent contrast to the instrument strings. This contrast makes the measurements very easy to read, ensuring that your measurements are always highly accurate.
  • EXCEPTIONAL QUALITY: The SIREN String Action Gauge is made from high-quality matte black Stainless Steel. The scales and charts are laser engraved into the stainless steel ensuring the measurements are precise and will not wear off. Allowing you to enjoy the product for years to come.
  • See more on Amazon...

Brand: SIREN Music Accessories   |   Manufacturer: SIREN Music Accessories

Package Dimensions: 0.2 x 4.1 x 5.4 inches (0.5 x 10.4 x 13.7 cm)

Amazon Price: $6.95 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

String Swing Guitar Hanger - Holder for Electric Acoustic and Bass Guitars - Stand Accessories Home or Studio Wall - Musical Instruments Safe without Hard Cases - Black Walnut Hardwood CC01K-BW 2-Pack

Model: 10766554   |    Mpn: 10766554   |    Ean: 0650106103657   |    PartNumber: 10766554   |   Asin: B074TMRGGY

NOT YOUR "TYPICAL" GUITAR HANGER

Unlike the typical guitar hangers found n the market, with unkown origin and quality that potentially puts even the finest guitars like Yamaha, Jackson, Fender and Ibanez in "life threatening" danger, the STRING SWING GUITAR HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the "right hands"

No matter what kind of guitar that you have, you can count on us to keep it safely stored, we have been crafting the best musical-instrument hangers and display systems that you can buy for OVER 30 YEARS; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life

Get your STRING SWING GUITAR HANGERS and keep your guitar safely stored; Add to cart Now while supplies last!

Features

  • UNLIKE THE "TYPICAL" GUITAR HANGERS OF UNKNOWN origin and quality that potentially puts even the finest guitars like Yamaha, Jackson, Fender and Ibanez in "life threatening" danger, the STRING SWING GUITAR HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the "right hands"
  • GUITARS ARE MORE THAN JUST INSTRUMENTS - While safer when transported inside a case along with your picks, strap, strings, tuner and capo, guitars are also practically meant to be displayed for your enjoyment even when you are not rocking it, the STRING SWING GUITAR HANGERS will turn your guitar into a piece of Wall Art while keeping it safe and sound
  • YOKE PIVOTS TO ACCOMMODATE VARIOUS HEADSTOCKS - Great for guitars which have a headstock with single or uneven heels; Personalized protective padding gently and securely supports the instruments; Deep cradle design prevents the guitar from being improperly placed in the hanger, recommended for classicals
  • OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA - No matter what kind of guitar that you have, you can count on us to keep it safely stored, we have been crafting the best musical-instrument hangers and display systems that you can buy for over 30 years; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life
  • LIFETIME STRUCTURAL WARRANTY - The STRING SWING GUITAR HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN HARDWOOD and backed by a LIFETIME STRUCTURAL WARRANTY -and Add yours to cart Now and keep your guitar safely stored while supplies last!
  • See more on Amazon...

Brand: String Swing   |   Manufacturer: String Swing

Package Dimensions: 2.4 x 4.8 x 8.4 inches (6.1 x 12.2 x 21.3 cm)

Amazon Price: $25.98 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Ernie Ball Musician's Tool Kit

Model: P04114   |    Mpn: P04114   |    Ean: 0749699141143   |    PartNumber: P04114   |   Asin: B00E8TQ3ZA

Ernie Ball s all in one tool kit is perfect for cleaning, maintaining and keeping your instrument in perfect playing condition. Change strings, set intonation, adjust action, check string height and more. Tool kit includes: Microfiber Polish Cloth, Wonder Wipes, Heavy Duty String Cutter, Peg Winder, 6-in-1 Screwdriver, Ruler, and durable hex wrench set. Part number 4114.

Features

  • All-in-one instrument care system
  • Includes everything for string changes and set-ups
  • Handy carrying case
  • See more on Amazon...

Brand: Ernie Ball   |   Manufacturer: Ernie Ball Music Man

Item Dimensions: 5.75 x 1.75 x 10.5 inches (14.6 x 4.4 x 26.7 cm)   |   Package Dimensions: 1.6 x 5.8 x 10.2 inches (4.1 x 14.7 x 25.9 cm)

Amazon Price: $28.95 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

Warranty: None.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

FretGuru Ultimate Fret End File 2 - Fix Sharp Fret Ends, Fret Sprout, Fret End Dressing File Pro Luthier Tool Guitar Tech [FINALLY AVAILABLE AGAIN - ADVANCED NEW DESIGN SHIPPING NOW]

Model: Fre-7943   |    Mpn: 4334391855   |    Ean: 0617209380132   |    PartNumber: 4334391855   |   Asin: B013ZHK4DM

For years many of the world's top luthiers have been hounding us to make more of these. The original Ultimate Fret End File was just something I developed for my personal workbench many years ago, as there was nothing else available that was capable of the detail and accuracy I was looking for. The "problems" all started when I decided to make an extra one for a luthier friend - who was blown away by how well it worked, and could no longer do fretwork without it.

He then shared it with another luthier - who immediately asked me if I could make 5 of them for the guys in his shop... and it just snowballed from there.

Since then I've made and shipped thousands of the original Ultimate Fret End file all over the world - personally modifying each file by hand... until it became physically impossible to do it anymore... my hands ache just thinking about it.

Over the past 5 years we've tried and tried to find a file manufacturer who was capable (and willing) to create a file like this for us and our fellow guitar geeks.

China was out of the question. We actually tried, and their attempts to create a Swiss quality file were... laughable.

The only way to make this happen was to go to the source. The only challenge? Two of them actually:
The first was the expense of having a custom file made by old-world craftsman.
The second was, one look at the level of detail and precision in our file design, and they passed on it. We even got as far as prototype samples, but they were just too complicated and costly to make.

But we finally stumbled upon a craftsman from one of Europe's oldest and most respected file makers who was willing to take on the challenge.

The design and prototype process has taken years and many revisions.

They tell me these are the most detailed and complicated files they've ever made.

Features

  • The most advanced and precision fret end dressing file available - designed from the ground up specifically for fret ends - this is your most effective weapon in the battle against sharp fret ends, " fret sprout ", and a must-have for a smoother, faster playing guitar that inspires you to play more often.
  • For details and a video on how to use the file, go to: https://www.youtube.com/watch?v=-Hti5s8LP9A . This shows the old, original file, but the technique is the same.
  • Precision flat ground, diamond honed and polished bottom - so the file glides across your fingerboard without scuffing the wood, finish or binding. We've teamed up with one of Europe's oldest and most respected file makers to help us create this finely crafted file, then we put the finishing touches and final diamond hone and polish here in our shop. Definitely NOT made in China.
  • Top of file has a smooth, safe ground edge, and the upper corners and tip are completely rounded and beveled to prevent damage to your fretboard and guitar. Also comes with a top quality, made in USA hardwood handle that feels comfortable in your hand, and takes the pain out of working on your frets.
  • Innovative Double Ski-Tip design, to protect your guitar top from scratches and dings.
  • See more on Amazon...

Brand: FretGuru   |   Manufacturer: FretGuru Fret Guru

Item Dimensions: 1 x 1 x 8 inches (2.5 x 2.5 x 20.3 cm)   |   Package Dimensions: 1.1 x 1.9 x 10 inches (2.8 x 4.8 x 25.4 cm)

Amazon Price: $28.87 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Guitar Neck Straight Edge (Notched) Luthiers Tool

Model: Nec-7931   |    Mpn: unknown   |    Ean: 0700604275728   |    PartNumber: unknown   |   Asin: B00DALF966

Essential for proper truss rod adjustment. Machined Edge 6061 Aluminum. One side is for 25.5" (Fender) scale guitars, and the other side is for 24.75" (Gibson) scale guitars. CNC precision machined for a flatness of +/- .001" Good to use with 21, 22 or 24 fret necks..doesn't matter. Use with strings on or off. Notched to the 22nd fret with clearance for more frets and Clearance for the nut on the other end. Covers the entire length for the neck . You can also place on top of the frets (off the cut notches) to use as a Standard Straightedge to check fret wear and level. If you're not sure scale length of your guitar... measure from the edge of the nut (headstock) to the center of the 12th fret. It should be about 12 3/4" (Fender)or 12.3/8"(Gibson) +/- 1/16". Neck Check Guitar Tools makes notched straight edges for a wide variety of guitars.

Features

  • Designed to check guitar neck straightness of the fretboard and not just the frets.
  • One side is for 25.5 (Fender) scale guitars, and the other side is for 24.75 (Gibson) scale guitars.
  • Better Quality, thicker material than tools from China/ Made In USA!
  • 6061 Aluminium- Nice Brushed Finish
  • Machined Edges for Flatness / Cheaper Tools Are Not
  • See more on Amazon...

Manufacturer: Neck Check Guitar Tools

Item Dimensions: 1.5 x 0.13 x 18.4 inches (3.8 x 0.3 x 46.7 cm)   |   Package Dimensions: 1.7 x 1.7 x 21.3 inches (4.3 x 4.3 x 54.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Guitar Notched Straight Edge and FRET ROCKER

Model: Nec-7933   |    Mpn: unknown   |    Ean: 0706084707490   |    PartNumber: unknown   |   Asin: B00O6KT5HO

Includes Notched Straight Edge and Fret Rocker Leveler: Designed to check guitar neck straightness of the fretboard and not just The frets. This is the only true way to check for straightness before leveling your frets. Essential for proper truss rod adjustment. 1/8"x1.5"x18.5" Machined Edge 6061 Aluminum. This is very rigid and will last for years without bending. One side is for 25.5" (Fender) scale guitars, and the other side is for 24.75" (Gibson) scale guitars. We wanted to make this tool affordable not only for guitar techs but players as well, so there is no fancy engraving, etc. CNC precision machined for a flatness of +/- .001" Good to use with 21, 22 or 24 fret necks..doesn't matter. Use with strings on or off. Notched to the 22nd fret with clearance for more frets. --Fret Rocker-- Precision CNC Machined 4 sided Fret Level Rocking Tool allows you to check for high frets on your guitar/bass fretboard and eliminating fret buzz, by setting on three fret at once and try rocking back and forth to see if that center fret (of the three) is high. Very simple to use and with 4 different length sides you can check all down the fretboard of all electric, acoustic and bass guitars. You will be surprised on your initial results when you first use this tool on your instrument. Our tool consists of 4 Precision Sides 1 5/16", 2", 3" and 4" Machined from 1/8" thick 6061 Aluminum plate. Flatness within .0002". ----------The straight edge is also sold separately.

Features

  • Tools includes both Notched Straight Edge and Fret Rocker Leveler
  • Precision CNC Machined in U.S.A.- Brushed Finish
  • Save $ by purchasing this combination
  • Ideal tools needed to ensure a straight and flat guitar fret board
  • Works with most electric guitars- 24.75 and 25.5 scale lengths
  • See more on Amazon...

Brand: Neck Check Guitar Tools   |   Manufacturer: Neck Check Guitar Tools

Item Dimensions: 2.5 x 2.5 x 24 inches (6.4 x 6.4 x 61.0 cm)   |   Package Dimensions: 3.5 x 3.5 x 25.2 inches (8.9 x 8.9 x 64.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

FretGuru Precision Sanding Beam Fret Leveler Leveling File Pro Luthier Guitar Tech Tool includes premium 100, 240, 320 grit peel & stick sandpaper [FINALLY BACK IN STOCK - FRESH BATCH JUST ARRIVED]

Model: Fre-7927   |    Mpn: 4334260536   |    Ean: 0617209380163   |    PartNumber: 4334260536   |   Asin: B00QD5EDB8

Your playing will never reach it's full potential... Until your guitar gets out of the way. Do you want a great playing guitar and more satisfying guitar playing? Perfectly true frets are the foundation of any great playing guitar.

If they're not right, your playing isn't what it could be, and less enjoyable too.

The FretGuru precision sanding beam has become the industry standard for accuracy.

FretGuru Precision Sanding Beam/Fret Levelers are the industry Standard, and they measure 16" long by 1" x 2" 6061 T6 aluminum.

both sides are precision Blanchard Ground (which itself is super accurate), and then lapped in on a diamond surfacing table, then our laboratory grade granite surface plate that is acurate to .0001" (one ten-thousandth of an inch) basically unmeasurable.

This thing is so accurate you could use it on the freakin' space shuttle! Do you think it'll make your frets perfectly level? You bet!

We top it all off with a durable and visually amazing candy blue powdercoat finish and laser-etched FretGuru logo.

Ships with premium 100, 240 and 320 grit peel and stick sandpaper included.

Features

  • Precision ground (not milled), and lapped to within .0001" accuracy.
  • 16 long by 1 x 2 top grade 6061 T6 seamless aluminum
  • Ships with premium 100, 240 and 320 grit peel and stick sandpaper included.
  • Durable (and very hot-rod looking) candy blue powdercoated finish, with laser etched logo
  • Includes protective plastic end caps so you don't damage any pickups, nuts or tuners.
  • See more on Amazon...

Brand: FretGuru   |   Manufacturer: FretGuru

Item Dimensions: 2 x 1 x 16 inches (5.1 x 2.5 x 40.6 cm)   |   Package Dimensions: 1.5 x 2.25 x 17.25 inches (3.8 x 5.7 x 43.8 cm)

Amazon Price: $57.87 | as of 03/23/2019(2:25pm pst)
Availibility:
List Price: $57.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Guitar Repairing Tool Kit(26PCS) Wire Plier,String Organizer,Fingerboard Protector,Hex Wrenches, Files, String Ruler Action Ruler, Spanner Wrench,Bridge Pins for Guitar Ukulele Bass Mandolin Banjo

 Ean: 0781520435649   |   Asin: B07MH24TJN

Specifications:



Material: metal,Plastic



color: Silver,Black



Inner diameter: about 3mm



Size: 20x10x5cm/7.9x3.9x 2inch(LxWxT)





Description:



.Suitable for: electric guitar, bass,mandolin,banjo,ukule,acoustic guitar and so on.

.Includes everything for string changes and set-ups, perfect for maintaining and keeping your instrument in perfect playing condition. Change strings, set intonation, adjust action, check string height and more

.Guitar files are in various shape, equaling flat, round, half round.

.String Action Ruler Gauge Tool could be uesd on both side. It's easy to read, so checking and adjusting string action will definitely be a breeze.





.Screwdriver you can adjust screwdriver's length and exchange its head by pressing the Round Iron Piece in the middle of the screwdriver

.String Organizer makes changing strings quick and easy.

.Guitar fingerboard guards for protecting your guitar or bass fretboard from scratching or damaging while filing and polishing





.Muti Spanner Wrench will tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, tuning machine and bridge thumbwheels.





.Guitar wire plier is suitable for cutting soft alloy/copper/iron wires, guitar strings, cable ties, pins of electronic component





Package Contents:

1x Storage Bag

1 x Guitar Wire Plier

2 x Guitar fingerboard protector

3 x Guitar Files

3 x Hex Wrench (4/5/6mm)

1 x Steel String Ruler

1 x String Action Ruler

1 x Muti Spanner Wrench

6 x Guitar Bridge Pins

1 x Guitar Picks Bag

4 x Guitar picks (random colors)

1 x guitar peg winder

1 x Screwdriver

Features

  • .Suitable for: electric guitar, bass,mandolin,banjo,ukule,acoustic guitar and so on.
  • .Screwdriver you can adjust screwdriver's length and exchange its head by pressing the Round Iron Piece in the middle of the screwdriver .String Organizer makes changing strings quick and easy. .Guitar fingerboard guards for protecting your guitar or bass fretboard from scratching or damaging while filing and polishing
  • .Muti Spanner Wrench will tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, tuning machine and bridge thumbwheels.
  • .Guitar wire plier is suitable for cutting soft alloy/copper/iron wires, guitar strings, cable ties, pins of electronic component
  • .Includes everything for string changes and set-ups, perfect for maintaining and keeping your instrument in perfect playing condition. Change strings, set intonation, adjust action, check string height and more .Guitar files are in various shape, equaling flat, round, half round. .String Action Ruler Gauge Tool could be uesd on both side. It's easy to read, so checking and adjusting string action will definitely be a breeze.
  • See more on Amazon...

Brand: sunflower   |   Manufacturer: sunflower

Package Dimensions: 2.09 x 4.49 x 8.43 inches (5.3 x 11.4 x 21.4 cm)

Amazon Price: $18.99 | as of 03/23/2019(2:25pm pst)
Availibility:
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Axe Heaven Classic Cherry Sunburst Electric Mini Guitar Replica (CG-330

Model: CG-330   |    Mpn: CG-330   |    Ean: 0661239450266   |    PartNumber: CG-330   |   Asin: B06XV5JVMD

This miniature replica CG-330 guitars are officially Licensed to commemorate iconic Fender) instruments. Each 1:4 scale ornamental replica guitar is individually handcrafted with solid wood and metal tuning keys.

Features

  • Individually handcrafted with solid wood and metal tuning keys
  • Each Guitar CG-330 comes complete with a high-quality Guitar case gift box & stand
  • Note: miniature replica look great but are not playable
  • See more on Amazon...

Brand: AXE HEAVEN   |   Manufacturer: Hal Leonard Music Accessories

Item Dimensions: 1.3 x 4.5 x 11.75 inches (3.3 x 11.4 x 29.8 cm)   |   Package Dimensions: 1.34 x 4.49 x 11.65 inches (3.4 x 11.4 x 29.6 cm)

Amazon Price: $28.37 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.99

Warranty: Limited.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Medeer Guitar Tools Kit Musician's Repair Maintenance Accessories Set for Guitar Ukelele Bass Mandolin Banjo

 Ean: 0646690340509   |   Asin: B07DRN7MT9


Features:
-- > Set up, change strings, set intonation, adjust action, measure height and depth, and more
-- > Suitable for acoustic, electric and bass guitars as well as banjo or ukulele
-- > Each tool in its own space in a stylish case
-- > For pro guitar players at the gig, hobby guitarists at home, or beginners just starting their first guitar lesson
-- > Includes most the tools needed to set up and maintain acoustic or electric guitars.
-- > Makes the perfect gift for any guitar player!

Specifications:
-- >> Material: Metal & Plastic
-- >> Suitable: for Guitar/ Bass/ Mandolin/ Banjo
-- >> Item Size: 20 * 10 * 5cm/ 7.9 * 3.9 * 2in
-- >> Item Weight: 252g/ 8.9oz
3-Types Mini Diamond File Set - Approx 14cm length, 4mm handle dimension. Various shape, equaling flat, round, half round.
String Action Ruler Gauge Tool - Pocket-sized with multi use on both side. It's easy to read, so checking and adjusting string action will definitely be a breeze.
Screwdriver By pressing the Round Iron Piece in the middle of the screwdriver you can adjust screwdriver's length and exchange its head.
Guitar String Winder and String Cutter Tool -Makes changing strings quick and easy. Professional Guitar/Bass String Cutter With Comfortable Rubber Grips.

Package List:
3 * File
3 * Hex wrench
1 * Screwdriver
1 * Steel ruler
1 * String Action Ruler
1 * Guitar string winder cutter pin puller
1 * Storage Bag

Features

  • All-in-one instrument care system. Tool kit includes: 3 File, 3 Hex wrench, 1 Screwdriver, 1 Steel ruler, 1 String Action Ruler, 1 Guitar string winder cutter pin puller, 1 Storage bag.
  • Includes everything for string changes and set-ups, perfect for maintaining and keeping your instrument in perfect playing condition. Change strings, set intonation, adjust action, check string height and more.
  • Guitar String Winder and Cutter with Bridge Pin Puller is made in one.
  • Handy carrying case, Compact musician's maintenance Repair toolkit, ideal gift for beginners or pros
  • Caution: Be careful when using tools. [ATTENTION]: Please determine that your order is sold by Medeer, We haven't authorized any other seller to sell our items on amazon.
  • See more on Amazon...

Brand: Medeer   |   Manufacturer: Medeer

Package Dimensions: 1.7 x 4.6 x 8.1 inches (4.3 x 11.7 x 20.6 cm)

Amazon Price: $15.97 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Acoustic Guitars Soundhole Cover Rubber Screeching Halt Feedback Buster Prevention (100mm)

 Ean: 0781573057348   |   Asin: B07GQQDJZ8

Features

  • Unique design Fits a standard 4" soundhole guitars.
  • Silicone material inserts safely into your guitar's sound hole. Doesn't damage the finish.
  • Eliminate feedback and enhance stage volume.
  • Requires no modification to the instrument.
  • Quick and easy to install & remove.
  • See more on Amazon...

Brand: DODOMI   |   Manufacturer: DODOMI

Package Dimensions: 0.4 x 4.5 x 8 inches (1.0 x 11.4 x 20.3 cm)

Amazon Price: $6.39 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

JLD Bridge Doctor, Screw Mount, for Flattening Bulging Guitar Soundboards

Model: #AN3694   |    Mpn: AN3694   |    Ean: 0685349903153   |    PartNumber: AN3694   |   Asin: B018ECP1VS

The JLD Bridge Doctor

Enhances volume Flattens 'bellied' soundboards A unique solution to a common bridge problem, this spruce device attaches beneath a guitar bridge. An adjustable spruce "pressure post" rests against the tailblock, providing leverage to flatten the soundboard.

The spruce block is 3/4" x 1-5/8" x 3-3/8" tall. The 1/4"-diameter tension rod is 9" long. The mounting post has three different positions to accomodate a variety of bridge styles.

Screw mount version: This spruce device attaches beneath the bridge via an inlaid screw (a white pearloid dot is included to hide the bridge screw). An adjustable spruce pressure post rests against the tailblock, providing leverage to flatten the soundboard. Better bridge contact and alignment can also enhance sound projection.

NOTE: This tool requires a hole to be drilled through the bridge behind the pin holes.

StewMac Tech Tip: We recommend the brass pin mount version (sold separately) for 12-string guitars.

Installation instructions included.

Features

  • A unique solution to a common bridge problem, this spruce device attaches beneath a guitar bridge
  • An adjustable spruce pressure post rests against the tailblock, providing leverage to flatten the soundboard
  • Better bridge contact and alignment can also enhance sound projection
  • This screw-mount version attaches beneath the bridge via an inlaid screw (this requires a hole to be drilled through the bridge behind the pin holes)
  • Installation instructions included
  • See more on Amazon...

Brand: JLD   |   Manufacturer: JLD

Package Dimensions: 0.94 x 4.06 x 9.33 inches (2.4 x 10.3 x 23.7 cm)

Amazon Price: $32.49 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

LOLUNUT Guitar Fret Crowning Dressing File Guitar Repairing Tool with Narrow/Medium/Wide 3 Edges

 Ean: 0749235089120   |   Asin: B07NRCWNQY

LOLUNUT Guitar Dressing fret is the professional musical instrument repair tool. It is very good quality fret file dressing tool, it can be used for most stringed musical instruments such as bass, guitar, ukulele etc.

Specification:
Material:Wooden + metal
Product size: 245 * 21mm
Uses: guitar wire polishing

Package Included:
1* Guitar Fret File

Note:
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
LOLUNUT GUARANTEE - Best Service and Guarantee. Any questions or problems about this product,please be free to contact us! We will serve you wholeheartedly!

Features

  • PROFESSIONAL REPAIR TOOL - LOLUNUT Guitar fret file is professional repair tool to help you complete the most common adjustments and repair.
  • GOOD QUALITY - the guitar dressing fret is made of high quality metal, and with wooden handle, confortable, efficient, convenient and time-saving.
  • 3 DIFFERENT SIZES EDGES - The crowning file has has narrow, mid and wide sizes. Can be used for most stringed musical instrument.
  • SUITABLE FOR MOST INSTRUMENTS - Guitar fret fits for most stringed musical instruments such as Bass, Ukulele, Guitar etc.
  • LOLUNUT GUARANTEE - Best Service and Guarantee. Any questions or problems about this product,please be free to contact us! We will serve you wholeheartedly!
  • See more on Amazon...

Brand: LOLUNUT   |   Manufacturer: LOLUNUT

Package Dimensions: 1.25 x 1.35 x 10.3 inches (3.2 x 3.4 x 26.2 cm)

Amazon Price: $18.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Canomo Set of 45 Premium Guitar Bass Luthier Tools Includes 9 Understring Radius Gauge, 32 Blades Steel Feeler Gauge Dual, 1 String Action Gauge Ruler, 2 Fingerboard Guards and 1 Grinding Stone

 Ean: 0741025103672   |   Asin: B07PBDW643

Usage:
This luthier tool set is designed to help with the common repairs and adjustments of guitar fret. Fingerboard guards are made of stainless steel, strong and sturdy. An indispensable tool both for guitar technicians and guitar players.

Specification:
Feeler Gauge
Material: 65 manganese steel with a lube oil coating to prevent pitting and corrosion.
Blades: 32 pieces
Measurement: from 0.0015 inch (0.038 mm) to 0.035 inch (0.889 mm)
Application: for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places.

Radius Gauge
Material: Stainless steel
Radian Measurement: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius
Application: Fit all kinds of electric guitar, electric bass, acoustic guitar, acoustic guitar, electric box guitar fretboard measured in radians, to adjust the strings piano code

String Action Ruler
Material: stainless steel
Size: 55mm 90mm 1mm
Graduations displayed: mm and inches
Application: measuring string height, frets, nuts, saddle, and other parts of a guitar.

Fingerboard guards:
Material: stainless steel
Size: 3 x 0.8 inch and 3 x 0.5 inch

Grinding stone:
Material: stone
Color: Light green
Size: 3.9 x 0.4 inch/ 10 x 1.1 cm

Package Including
1 Set of 32 blades feeler gauge
1 Set of 9 understring radius gauge
1 Set of string action ruler
2 x Fingerboard guards
1 x Grinding stone
1 x Velvet bag

Features

  • Guitar luthier tool set includes: 9 Understring Radius Gauge, 32 Blades Steel Feeler Gauge Dual, 1 String Action Gauge Ruler, 2 Fingerboard Guards and 1 Grinding Stone in a velvet bag, convenient to carry and store
  • 32 Blades feeler gauge: 32 hardened, tempered steel blades, measurement from 0.0015 inch (0.038 mm) to 0.035 inch (0.889 mm), it is a guitar common spacing chord distance measure tool, chrome plated main shaft for easy clean up and professional look
  • 9 Understring radius gauge: including 7.25, 9.5, 10, 12, 14, 15, 16, 17 and 20 radius, can be applied to accurately measure fret board radius, saddle radius nut radius from either the top or the bottom radius surface, a must have for bass guitar maintain and adjustment
  • String Action Ruler: make the necessary measurements and adjustments on acoustic and electric guitar, bass, banjo, mandolin and other stringed instruments
  • Fingerboard guard with Grinding Stone - Designed to protect your guitar or bass fretboard from scratching or damaging while filing and polishing
  • See more on Amazon...

Brand: canomo   |   Manufacturer: canomo

Package Dimensions: 1.3 x 3.27 x 5 inches (3.3 x 8.3 x 12.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Zehui Guitar Neck Rest Support Neck Pillow String Instrument Guitar Mat for Guitar Luthier Tool

 Ean: 6954396225315   |    PartNumber: YJJ190114bk-dianzi-7FF84502E8   |   Asin: B07MMLX4YP

Description:

Item type:Guitar Neck Rest Support

Dimensions: Length 3.74" (95mm) x Width 2.4" (60mm) x Height 2.3" (65mm)

Material: mahogany with felt

Slot: 0.6" (15mm) height

Musical Instruments: Applicable to almost any neck instrument, guitar, bass bass, ukulele, mandolin, banjo etc.

Package Include:

1 * Guitar Neck Rest Support

Note:

The colors deviation might differ due to different monitor settings.

Features

  • This neck rest are great for any work on your instrument, makes string changes easier.
  • Protect Guitar from Scratching/ Slipping when work with it such as cleaning or repairing.
  • Suitable for most instruments with neck, guitars, basses, ukulele, mandolin, banjo and many more.
  • It can support the neck steadily, and the cork will not damage the neck.
  • Two height design can suit different instruments.
  • See more on Amazon...

Brand: Zehui   |   Manufacturer: ZeHui

Amazon Price: $12.38 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

BROTOU 38pcs Guitar Strings Changing Kit with Tool Guitar String Winder, Cutter, Bridge Pins, Pins Picks, Pick Holder for Guitar Starter

 Ean: 0711583006111   |   Asin: B07NPD2ZTT

A must have basic tool kit to set up and adjust acoustic guitars for guitar players, hobby guitarists and beginners, it is just starting their first guitar lesson.

Features
Material: ABS, Stainless Steel.
High quality: All the guitar accessories are with very good quality, durable and cost effective.

Package Included:
18 x Guitar strings (3 sets, 6pcs/each set)
12 x Guitar Pins (6 white, 6 black)
6 x Guitar Picks (random color)
1 x Picks Holder
1 x Guitar String Cutter

For any question, contacting us please, Happy Shopping!!!

Features

  • Guitar Strings Changing Kit Package include: 3 sets of guitar strings, 6pcs guitar picks(color are random), 12pcs guitar pins, 1pcs guitar string winder and 1pcs cutter, very nice tool kit, suitable for most guitar beginners
  • 🔧3-in-1 multifunctional guitar maintenance tool: built-in string winder, string cutter, bridge pin puller. Makes string changes quicker and easier
  • 6 Pcs assorted Colors picks&1pick holder: Offers a warm, round music tone (note: color will be delivered at random)
  • 3 Sets of guitar strings(Colorful, red, yellow): Each set contains 6 strings(1: 0.2 mm/ 0.007 inch; 2: 0.3 mm/ 0.01 inch; 3: 0.6 mm/ 0.02 inch; 4: 0.7 mm/ 0.027 inch; 5: 1 mm/ 0.039 inch; 6: 1.2 mm/ 0.047 inch), High quality steel Material, Convenient and durable for your daily use
  • 👍2 Set of 6 bridge pin: Quality plastic molding, high strength, tensile, good gloss
  • See more on Amazon...

Brand: BROTOU   |   Manufacturer: BROTOU

Package Dimensions: 0.8 x 5 x 7.5 inches (2.0 x 12.7 x 19.1 cm)

Amazon Price: $11.23 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Vencetmat Universal Angler Ruler with Tile Positioning Aperture, Aluminum Alloy Multi Angle Measuring Ruler Angularizer Template Tool for Carpentry, Bricklayer, Craftsmen, Handymen,DIY

 Ean: 8011666173610   |   Asin: B07PJC5YXL

Features
-Premium Aluminum Alloy Material: Universal angularizer ruler be made of aluminum alloy, extremely strong and light; aluminum metal make it durability and resistant to scratch, corrode etc.
-Laser etched number: measuring ruler scales use Laser etched which make angularizer scales more clarited and accurate to be read data.
-IN & CM Angles measurements: All arms are dual-calibrated in inches and metric measures.
-High-efficiency: You can save more time because angle ruler can be set-up in seconds.
-Wide Usage: Universal Angularizer Ruler can be set to mark bricks, tiles, lumber and laminates. Perfect for builders, craftsmen, weekend warriors and DIY eraser.
-Portable and Ergonomic: Unique tightening mechanism for one-handed operations.

Package Included
1x 6-Sided Angle Measuring Ruler

Features

  • Heavy Duty Upgrade Our multi angle measuring ruler are newly upgraded and feature-rich. It is a measurement tool and a tile positioning hole opener. Other common measuring ruler consists of only four-piece ruler. Our newly upgraded universal angularizer ruler has six-piece ruler and six metal knobs that can be folded at will. Just adjust the six metal knobs to create the desired shape accurately. It is convenient and quick to measure objects of different shapes.
  • Premium Aluminum Alloy Material Our aluminum alloy multi angle measuring ruler is made from extremely strong and light aluminum alloy metal, including the bolts! this multi angle measuring ruler is more durable and sturdy than the plastic one, You don't have to worry about corrosion, metal knobs have a longer life and all parts are all metal.
  • Safe & Convenient Just place onto your work area, slide the rulers into the shape you need, and tighten the screws. Excellent portable tool that is easy to fold, saves space and is easy to store. One-handed operation with a unique fastening mechanism.
  • Wide Range of Applications Easy to use, our multiangle template tool works great on carpentry, brick, tile, wood, glass, stone, laminate, construction & engineering projects and much more! Create layouts in tiling, bricking, paving stone, lumbering, laminating and so on! Simply adjust the 6 metal knobs to create your desired shape accurately.
  • A Gift Full of Surprises Our latest upgraded Multi Angle Measuring Ruler is the latest product, unlike other common products. For carpentry, diy projects, home improvement projects such as floor coverings, laying tiles, roof repairs or any weekend project... this tool is perfect and is the perfect gift for your weekend warrior friends or your husband. It will definitely make them feel very surprised!
  • See more on Amazon...

Brand: Vencetmat   |   Manufacturer: Vecnetmat

Item Dimensions: 1.97 x 4.72 x 9.84 inches (5.0 x 12.0 x 25.0 cm)   |   Package Dimensions: 1.97 x 4.72 x 9.84 inches (5.0 x 12.0 x 25.0 cm)

Amazon Price: $16.95 | as of 03/23/2019(2:25pm pst)
Availibility:
List Price: $16.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

COCODE Guitar Luthier Tool Kit Includes 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret Rocker Leveling Tool, 2 Pcs Fingerboard Guards and 2 Sheets Sanding Paper with Carry Bag

 Ean: 0719034392141   |    PartNumber: GuitarToolos7PCS   |   Asin: B07NW62L8H

Guitar fret file:

Color: silver and orange

Material: stainless steel and rubber

Size: filing surface is 4 inches in length, rubber handle is 3.2 in length


Fingerboard guards:

Material: stainless steel

Size 3 x 0.8 inch and 3 x 0.5 inch


Guitar fret rocker leveling tool:

Material: stainless steel

Color: steel color

Size: 10.3 x 5.1 cm/ 4 x 2 inches

Thickness: 2 mm/ 0.08 inch

4 side size: 4, 2.8, 2, 1.3 inches/ 10.3, 7.1, 5, 3.3 cm


Sand paper:

Size: 23cm x 28cm/ 9inch x 11inch


Package includes:

1 x guitar fret crowning file

1 x guitar fret rocker leveling

2 x fingerboard guard

2 x sand paper

1 x velvet carry bag

Features

  • PERFECT COMBINATION - This luthier tool set is specifically designed to help with the common repairs and adjustments of guitar fret. Products are made of stainless steel, strong and sturdy. An indispensable tool for luthiers, guitarists, and many DIY fret work.
  • FRET FILE - Used for grinding guitar fret, groove design and safe edge can prevent fingerboard from being damaged, same filing size on both 2 edges ensures efficient and delicate work, long filing surface and rubber handle for comfortable use.
  • FRET ROCKER - Accurate straight edges can help your to detect any discrepancy existing in frets height, for checking high guitar frets that cause buzzing, and check the final height after you redressed or replaced them.
  • FINGERBOARD GUARD - Designed to protect the fingerboard when doing work on your fret, prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets.
  • 2 Sheets Sanding Paper - Comes with 2 piece of sand paper, let you can adjust the high of your saddle and nut anytime, you can use it polish the finger board, fret, side, strings etc. Can be cutted to pieces.
  • See more on Amazon...

Brand: COCODE   |   Manufacturer: COCODE

Package Dimensions: 0.5 x 6 x 9 inches (1.3 x 15.2 x 22.9 cm)

Amazon Price: $13.59 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Yibuy Guitar Bass Fret Press Tool Insert Fretting Tool 9.5 Radian Brass Insert

Model: M7190114041   |    Mpn: M7190114041   |    PartNumber: M7190114041   |   Asin: B07MV5NYXR

Features:
1.Each item is qualify checked with a unique Manufacturing Part Number label on the inner package;in order to confirm if it is authentic item sold by our store.
2.Any question,please contact and send us the MPN label information.
3.Pressing frets into a guitar fretboard has the advantage over hammering that the entire fret is pressed in one operation,eliminating the possibility that an end will not be seated right,or the hammering could cause the fretwire to deform.
4.Suitable for most of guitars, such as electric guitar, acoustic guitar, electric bass etc.
5.Including 1 fret press insert tool,2pcs wooden soundhole cauls ,1pcs wrench and 9.5 radian brass insert.

Specifications:
Material: Metal+wood
Color: Blue+Golden
Brand name: Yibuy
Wooden Caul Size:7.1x5CM/2.8x1.97 Inch(LxW)
Fret Insert Tool Size:27.5x14CM/10.83x5.51 Inch(LxW)
Brass Insert:63x13.5MM/2.48x0.53 Inch(LxW)
Weight: 919g

Package include:
1 x Fret Press Insert Tool
2 x Wooden soundhole cauls
1 x Fret Press Insert 9.5 Radian

Features

  • Pressing frets into a guitar fretboard has the advantage over hammering that the entire fret is pressed in one operation,eliminating the possibility that an end will not be seated right,or the hammering could cause the fretwire to deform.
  • Suitable for most of guitars, such as electric guitar, acoustic guitar, electric bass etc.
  • Including 1 fret press insert tool,2pcs wooden soundhole cauls ,1pcs wrench and 9.5 radian brass insert.
  • See more on Amazon...

Brand: Yibuy   |   Manufacturer: etfshop

Amazon Price: $36.18 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 24 hours
List Price: $36.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

C. B. Gitty's Guitar Fretting/Fret Slotting Saw - 18TPI - Made in the USA!

 Ean: 0602589225500   |   Asin: B07MTMY3LD

This is a high-quality dovetail-style saw, perfect for cutting fret slots for standard fret wires that fit in a .023" slot. The blade has a .020" kerf and is 8" long with a steel reinforced ridge along the top - much like the more expensive fretting saws sold elsewhere. We recommend using this saw along with a miter guide of some sort to help ensure a straight and even fret slot. We carefully check and adjust the kerf widths on these after receiving them from the manufacturer, to make sure they will be suitable for cutting properly sized fret slots. Actual width of the teeth set when measuring with calipers may vary from .020 to .023 inches.

Features

  • Cut perfect fret slots every time with this high-quality, American-made saw
  • Perfect for cutting fret slots for Guitars, Cigar Box Guitars and other stringed instruments
  • 1 3/4 total cut depth, teeth are angled to cut on the push stroke
  • ~.020 Kerf with 8 long blade - Reinforced spine adds rigidity to the blade
  • 18 Teeth Per Inch for fine, smooth cutting
  • See more on Amazon...

Brand: C. B. Gitty   |   Manufacturer: C. B. Gitty Crafter Supply

Amazon Price: $16.99 | as of 03/23/2019(2:25pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret...
  2. Guitar Repairing Tool Kit(26PCS) Wire Plier,String Organizer,Fingerboard Protector,Hex Wrenches, Fil...
  3. LOLUNUT Guitar Fret Crowning Dressing File Guitar Repairing Tool with Narrow/Medium/Wide 3 Edges
  4. Canomo Set of 45 Premium Guitar Bass Luthier Tools Includes 9 Understring Radius Gauge, 32 Blades St...
  5. Zehui Guitar Neck Rest Support Neck Pillow String Instrument Guitar Mat for Guitar Luthier Tool
  6. BROTOU 38pcs Guitar Strings Changing Kit with Tool Guitar String Winder, Cutter, Bridge Pins, Pins P...
  7. Vencetmat Universal Angler Ruler with Tile Positioning Aperture, Aluminum Alloy Multi Angle Measurin...
  8. COCODE Guitar Luthier Tool Kit Includes 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Ste...
  9. Yibuy Guitar Bass Fret Press Tool Insert Fretting Tool 9.5 Radian Brass Insert
  10. C. B. Gitty's Guitar Fretting/Fret Slotting Saw - 18TPI - Made in the USA!

Most Wished For

  1. D’Addario Accessories Pro-Winder Guitar String Winder and Cutter – All-In-1 Restringing Tool – Inclu...
  2. FretGuru 2 Precision 8-in-1 String Action Gauge Fret Rocker Guitar Setup Ruler Luthier Tool guitaris...
  3. Baroque Diamond Guitar Fret Crowning Dressing File Narrow/Medium/Wide 3 Edges Guitar Repairing &...
  4. Guitar Neck Straight Edge (Notched) Luthiers Tool
  5. Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret...
  6. Guitar Notched Straight Edge and FRET ROCKER
  7. Ernie Ball Musician's Tool Kit
  8. Guitar Bridge Saddle Nut Files Set - 13 Different Size Stainless Steel Needle Files with Circular Cr...
  9. FretGuru Precision Sanding Beam Fret Leveler Leveling File Pro Luthier Guitar Tech Tool includes pre...
  10. UPGRADE iLuiz Guitar Neck Notched Straight Edge Luthiers Tool for Gibson Fender and Most of Guitar F...

Most Gifted

  1. D’Addario Accessories Pro-Winder Guitar String Winder and Cutter – All-In-1 Restringing Tool – Inclu...
  2. Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret...
  3. Ernie Ball Musician's Tool Kit
  4. Guitar Repairing Tool Kit(26PCS) Wire Plier,String Organizer,Fingerboard Protector,Hex Wrenches, Fil...
  5. Axe Heaven Classic Cherry Sunburst Electric Mini Guitar Replica (CG-330
  6. Medeer Guitar Tools Kit Musician's Repair Maintenance Accessories Set for Guitar Ukelele Bass Mandol...
  7. Acoustic Guitars Soundhole Cover Rubber Screeching Halt Feedback Buster Prevention (100mm)
  8. Baroque Diamond Guitar Fret Crowning Dressing File Narrow/Medium/Wide 3 Edges Guitar Repairing &...
  9. String Swing Guitar Hanger - Holder for Electric Acoustic and Bass Guitars - Stand Accessories Home ...
  10. JLD Bridge Doctor, Screw Mount, for Flattening Bulging Guitar Soundboards

Top Selling

  1. D’Addario Accessories Pro-Winder Guitar String Winder and Cutter – All-In-1 Restringing Tool – Inclu...
  2. Guitar Bridge Saddle Nut Files Set - 13 Different Size Stainless Steel Needle Files with Circular Cr...
  3. FretGuru 2 Precision 8-in-1 String Action Gauge Fret Rocker Guitar Setup Ruler Luthier Tool guitaris...
  4. Guitar Luthier Tool Kit Included 1 Pcs Guitar Fret Crowning Luthier File, 1 Pcs Stainless Steel Fret...
  5. UPGRADE iLuiz Guitar Neck Notched Straight Edge Luthiers Tool for Gibson Fender and Most of Guitar F...
  6. Baroque Diamond Guitar Fret Crowning Dressing File Narrow/Medium/Wide 3 Edges Guitar Repairing &...
  7. SIREN: String Action Gauge - Guitar Setup Ruler - Luthier Tool
  8. String Swing Guitar Hanger - Holder for Electric Acoustic and Bass Guitars - Stand Accessories Home ...
  9. Ernie Ball Musician's Tool Kit
  10. FretGuru Ultimate Fret End File 2 - Fix Sharp Fret Ends, Fret Sprout, Fret End Dressing File Pro Lut...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.