Frontpage > Electronics > Music Equipment > Electric Guitar Hardware

Best Electric Guitar Hardware - Buying Guide

Last Updated: 03/25/2019

Share on

Bestselling Electric Guitar Hardware on Amazon

  1. Fender Pickguard Screws
  2. Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
  3. set of 4 Guitar nuts, washers & lock washers for US CTS Pots & Switchcraft Jacks, metal (ship from usa)
  4. Honbay 10Pcs 1/4" Mono Jack Socket Stratocaster Replacement for Bass Electric Guitar
  5. Electrosocket Jack Plate for Telecasters - Polished Nickel Finish
  6. Dopro Set of 6 Chrome Guitar String Through Body 5/16" String Ferrules for American Standard Telecaster
  7. Musiclily Metric 3 Way Short Straight Guitar Toggle Switch for Gibson Epiphone Les Paul Electric Gui...
  8. Musiclily Vintage Roller Guitar String Tree Guides Retainer for Fender Strat Stratocaster Tele Telec...
  9. Kmise Z3718 Black Tip ST Style Tremolo Arm Whammy Bar Fits Strat Guitar
  10. Dopro Nickel Metal Curved Base Bottom Jack Plate Square Jackplate fits Gibson LP Les Paul

  #1

Fender Pickguard Screws

Model: 0994923000   |    Mpn: 0994923000   |    Ean: 9776819091669   |    PartNumber: 0994923000   |   Asin: B0002KZE7C

Pickguard Screws

Features

Brand: Fender   |   Manufacturer: Fender Musical Instruments Corp.

Item Dimensions: 1.6 x 3.4 x 0.6 inches (4.1 x 8.6 x 1.5 cm)   |   Package Dimensions: 0.7 x 2.2 x 3.9 inches (1.8 x 5.6 x 9.9 cm)

First Available: 2010-07-26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware

Model: PTT1   |    Mpn: PTT1   |    Ean: 0813263017377   |    PartNumber: PTT1   |   Asin: B01N94UUD0

A standard " jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve, the pressure of the tip dictates how good the ground is, resulting in inferior sound quality (I.e., that "static sound"). Not only is the signal strength compromised and weaker, the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. With the new Pure Tone Jack, the audio jack as you know it will never be the same again. The Pure Tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. Not only is the signal much cleaner, stronger, and clearer, but all aspects of the EQ spectrum are also greatly improved while eliminating those nasty spikes. In addition, the Pure Tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. The new standard jack has been born! The Pure Tone multi-contact jack was invented by Dave Linsk, lead guitarist of the International recording group Overkill. The jack was created as a result of constant failures of the current production jack models that have been available on the market until now. As it turns out, the 100 year old audio jack design really needed some changes to make it road worthy!

Features

  • Full-contact Output Jack
  • 2 concave ground contacts
  • 2 concave hot leads
  • Increased Voltage Handling Capacity
  • Cleaner, Stronger, Clearer Signal
  • See more on Amazon...

Brand: Pure Tone Technologies   |   Manufacturer: AP International

Package Dimensions: 0.5 x 3 x 4 inches (1.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

set of 4 Guitar nuts, washers & lock washers for US CTS Pots & Switchcraft Jacks, metal (ship from usa)

Model: ph48   |    Mpn: 4334248875   |    Ean: 0721107133261   |    PartNumber: 4334248875   |   Asin: B01BJNIFLC

Guitar nuts, washers & lock washers for US CTS Pots & Switchcraft Jacks set of 4.
Includes 4 nuts, 4 flat washers, and 4 star lock washers.
3/8" x 32 threads will fit most CTS pots and Switchcraft input jacks(does not fit Switchcraft 3-way toggle switches).
Nuts uses 1/2" wrench and has a 5/16" inside diameter(3/8" threaded).
Flat washer is 5/8" outside diameter and 3/8" inside.
Star washer is 11/16" outside diameter and 3/8" inside.
These will not fit metric alpha pots or metric input jacks!
Fast delivery. *** Products may have a high price.*** ***Please compare prices before you buy.***

Features

  • Includes 4 nuts, 4 flat washers, and 4 star lock washers.
  • 3/8 x 32 threads will fit most CTS pots and Switchcraft input jacks(does not fit Switchcraft 3-way toggle switches)
  • Nuts uses 1/2 wrench and has a 5/16 inside diameter(3/8 threaded).
  • Flat washer is 5/8 outside diameter and 3/8 inside. Star washer is 11/16 outside diameter and 3/8 inside.
  • These will not fit metric alpha pots or metric input jacks!, Fast delivery.*** Products may have a high price.*** ***Please compare prices before you buy.***
  • See more on Amazon...

Brand: music bangdanmall ok

Package Dimensions: 0.31 x 2.01 x 2.01 inches (0.8 x 5.1 x 5.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Honbay 10Pcs 1/4" Mono Jack Socket Stratocaster Replacement for Bass Electric Guitar

Model: 4348091637   |    Mpn: 4334248863   |    Ean: 6957316634082   |    PartNumber: 4334248863   |   Asin: B01M0IQ5QI

For All electric guitar & bass guitar

Package include
10 of 1/4"(6.35mm) Electric guitar input jacks
10 of Washers
20 of nuts

Features

  • 10pcs of guitar cord jacks;10pcs washers;20pcs nuts
  • Nickel plated for maximum signal transfer & durability;Material:Alloy
  • Great replacement guitar jacks for your bad ones
  • Those guitar cord jacks that can be used either on the guitar or receiving amplifier;Great for the hobbyist
  • For all electric guitar and bass guitar replacement and building
  • See more on Amazon...

Brand: HONBAY   |   Manufacturer: Honbay

Package Dimensions: 0.2 x 4 x 6 inches (0.5 x 10.2 x 15.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Electrosocket Jack Plate for Telecasters - Polished Nickel Finish

Model: 4334248713   |    Mpn: unknown   |    Ean: 0683405543220   |    PartNumber: unknown   |   Asin: B00U531UY2

Retrofit jackplate for Telecaster . Nickel plated brass construction. Compatible with Switchcraft 1/4 inch input jack. Fits onto the standard 7/8 inch diameter hole. Includes two mounting screws. The curved surface makes it easy to insert a jack and the diagonally-mounted screws provide resistance to loosening.

Features

  • Electrosocket Jack Plate for Telecasters - Polished Nickel Finish
  • Replaces clip in Jack Cup.
  • Screws in for more secure mounting - comes with mounting screws.
  • Sized for 1/4 diameter USA-sized Jacks
  • Requires 7/8 mounting hole.
  • See more on Amazon...

Brand: Allparts   |   Manufacturer: Allparts

Package Dimensions: 0.45 x 2 x 3.5 inches (1.1 x 5.1 x 8.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Dopro Set of 6 Chrome Guitar String Through Body 5/16" String Ferrules for American Standard Telecaster

Model: F190-Dopro   |    Mpn: F190-Dopro   |    Ean: 0647731180221   |    PartNumber: F190-Dopro   |   Asin: B075676ZB8

Features

  • Total length: 9.5mm; Top outer diameter: 10mm; Insertion part into body diameter: 5/16" (8mm); Inner hole diameter: 6mm
  • These String ferrules can fit most USA Standard Fender Telecasters
  • Please verify the dimensions carefully before you order the item
  • Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message
  • Package includes: Set of 6 Guitar String Ferrules
  • See more on Amazon...

Brand: Dopro   |   Manufacturer: Dopro

Package Dimensions: 0.5 x 2.5 x 3.5 inches (1.3 x 6.4 x 8.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Musiclily Metric 3 Way Short Straight Guitar Toggle Switch for Gibson Epiphone Les Paul Electric Guitar,Black Top with Black Tip

Model: M911   |    Mpn: 4334248867   |    Ean: 0700115946193   |    PartNumber: 4334248867   |   Asin: B00VM5CQRC

Features

  • 3 Way toggle switch,ideal for Asia made Gibson Les Paul or Epiphone guitar
  • Threaded shaft 12mm diameter by 9mm tall
  • Material:metal alloy; Color: Chrome with black tip
  • Including knurled mounting nut and flat washer;The switch tip is replaceable
  • Package Includes: 1 Pc 3 way switch
  • See more on Amazon...

Brand: Musiclily

Package Dimensions: 0.5 x 2.3 x 3 inches (1.3 x 5.8 x 7.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Musiclily Vintage Roller Guitar String Tree Guides Retainer for Fender Strat Stratocaster Tele Telecaster Electric Guitar, Chrome(Pack of 4)

Model: MX0655-4   |    Mpn: 4334248871   |    Ean: 0700115951265   |    PartNumber: 4334248871   |   Asin: B015FP52NY

Features

  • Improves performance for your guitars,it stress on your strings which allows the guitar to stay in tune longer
  • This also prevents wear and tear on the strings which results in longer string life
  • Base is 6mm wide x 11.5mm length;Roller width is 10mm;Roller diameter is 5mm; String Spread(center to center) is 7 mm
  • Metal made, come with mounting screws, ready for use.
  • Package Included: 4 pcs Guitar String Trees
  • See more on Amazon...

Brand: Musiclily   |   Manufacturer: Musiclily

Package Dimensions: 0.7 x 2.7 x 3.6 inches (1.8 x 6.9 x 9.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Kmise Z3718 Black Tip ST Style Tremolo Arm Whammy Bar Fits Strat Guitar

Model: Z3718   |    Mpn: Z3718   |    Ean: 0634458872515   |    PartNumber: Z3718   |   Asin: B010HEI02S

100% brand new, high quality and testing is fine The Arm diameter is 5.3mm The picture show is you will receive. For Fender Strat Package Includes: 1 PC Guitar Tremolo Arm Whammy Bar

Features

  • The Arm diameter is 5.3mm
  • For Fender Strat
  • Package Includes: 1 PC Guitar Tremolo Arm Whammy Bar
  • See more on Amazon...

Brand: Kmise   |   Manufacturer: Kmise

Item Dimensions: 0.23 x 0.89 x 5.85 inches (0.6 x 2.3 x 14.9 cm)   |   Package Dimensions: 0.15 x 4.5 x 7 inches (0.4 x 11.4 x 17.8 cm)

Warranty: Warranty on parts.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Dopro Nickel Metal Curved Base Bottom Jack Plate Square Jackplate fits Gibson LP Les Paul

Model: J722-Dopro   |    Mpn: 4334369969   |    Ean: 0647731179881   |    PartNumber: 4334369969   |   Asin: B07567D7TS

Features

  • Made of Metal;
  • Dimension: 35.1 x 34.9 (mm); Screw holes distance from center to center: about 25 x 25.4 (mm); Central hole diameter: 10mm
  • Curved Bottom for most Gibson Les Pauls; Please be sure to verify the dimensions carefully before you order the item
  • Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message
  • Package includes: 1x Jackplate with screws
  • See more on Amazon...

Brand: Dopro   |   Manufacturer: Dopro

Package Dimensions: 0.24 x 3.23 x 4.41 inches (0.6 x 8.2 x 11.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Seismic Audio - SAGA25 - Replacement Chrome Strat-Style Tremolo Bridge Set for Strat Style Electric Guitar and Luthier Projects

Model: SAGA25   |    Mpn: SAGA25   |    Ean: 0847861036805   |    PartNumber: SAGA25   |   Asin: B0191YD4AS

Replacement Chrome Strat-Style Tremolo Bridge Set - Model Number: SAGA25, Chrome Strat-Style Tremolo Bridge Set, Standard Size will fit most guitars, Aftermarket replacement for Strat style Electric guitars, All the parts needed for a full start style tremolo and bridge are included. Designed as a direct replacement for the Strat style tremolo bridges, the Seismic Audio Chrome Tremolo Bridge is stylish and functional upgrade that is perfect for many guitars from manufacturers such as Fender, Gibson, Ibanez, Epiphone, Squire, ESP, Paul Reed Smith, Jackson, Yamaha, BC Rich, Schechter, Ernie Ball, and many more. All the parts needed for a full start style tremolo and bridge are included. Each string saddle is individually adjustable for height and intonation. Installation is simple and painless.

Features

  • Model Number: SAGA25
  • Chrome Strat-Style Tremolo Bridge Set
  • Standard Size will fit most guitars
  • Aftermarket replacement for Strat style Electric guitars
  • All the parts needed for a full strat style tremolo and bridge are included
  • See more on Amazon...

Brand: Seismic Audio   |   Manufacturer: Seismic Audio

Item Dimensions: 1 x 2 x 4 inches (2.5 x 5.1 x 10.2 cm)   |   Package Dimensions: 1.81 x 5.71 x 8.31 inches (4.6 x 14.5 x 21.1 cm)

Warranty: One year manufacturer defect and labor.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Musiclily 1/4" 6.35mm Rectangular Mono Guitar Output Jack Plate Input Socket for Gibson Les Paul Epiphone Replacement, Gold

Model: M570FBA   |    Mpn: M570FBA   |    Ean: 0700115935715   |    PartNumber: M570FBA   |   Asin: B00GD1JBIM

Features

  • Ideal for Gibson Les Paul or Epiphone style guitar building or replacement
  • 1/4 (6.35mm) input Jack
  • Screw Hole Center to Center:28mm*19.5mm; Come with screws
  • Color: Gold ; Shape:Rectangle; Size: 37mm(L)x28.5mm(W)
  • Package Including: 1pc guitar jack
  • See more on Amazon...

Brand: Musiclily   |   Manufacturer: Musiclily

Package Dimensions: 0.5 x 2 x 4 inches (1.3 x 5.1 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Fender Pickguard/Control Plate Mounting Screws - Gold

Model: 0994924000   |    Mpn: 0994924000   |    Ean: 0717669542443   |    PartNumber: 0994924000   |   Asin: B002MGZS48

Some of our most requested replacement screws. Made for Fender and used on a variety of vintage and contemporary models.

Features

  • Package contains 24 Phillips head (4 X 1/2") screws
  • Used for pick guard and control plate mounting on most Fender instruments
  • Some of our most requested replacement screws
  • Made for Fender and used on a variety of vintage and contemporary models
  • Gold
  • See more on Amazon...

Brand: Fender   |   Manufacturer: Fender Musical Instruments Corp.

Item Dimensions: 3.54 x 7.48 x 11.42 inches (9.0 x 19.0 x 29.0 cm)   |   Package Dimensions: 1.4 x 2.7 x 5.7 inches (3.6 x 6.9 x 14.5 cm)

Warranty: 1 year limited.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Metallor Roller String Trees String Retainer Guides Compatible with Strat Tele Style Electric Guitar Bass Parts Replacement Pack of 2pcs with Mounting Screws Chrome.

Model: SHS08   |    Mpn: SHS08   |    Ean: 0610825795755   |    PartNumber: SHS08   |   Asin: B07K7H2298


Description:

*This is one set of 2 chrome roller string trees.

*These string retainers are the type with the little rollers on them to help stay in tune and help prevent strings from breaking.

*They come with 2 mounting screws as well, great replacement for your broken, dirty or old string retainer, sure to look great on your guitar!

*The rollers on them can lessen the stress on your strings, which allows the guitar to stay in tune longer.

*They also can prevent wear and tear on the strings, which results in longer string life.

*Base Size (L x W): Approx. 0.43 x 0.23 inch / 11 x 6mm

*Total Height: Approx. 0.47 inch / 12mm (including the roller)

*Roller Size (L x D): Approx. 0.4 x 0.2 inch / 10 x 5mm

*String Spread (Center to Center): Approx. 0.27 inch / 7mm

*Material: Metal

*Unit Type: Piece

*Package Includes: A pair of guitar string retainers and 2Pcs mounting screws

Note:

*Due to the light and screen difference, the item's color may be slightly different from the picture, please understand.

Features

  • Compatible with Strat style Tele style electric guitar or bass.
  • One pair of double roller string trees with mounting screws. Special rolling design improves performance of even the best set-up guitars, Metal made, ready for use.
  • Prevent wear and tear on the strings which results in longer string life. Lessen the stress on your strings, which allows the guitar to stay in tune longer.
  • Base is 6mm width x 11mm length; Roller width is 10mm; Roller diameter is 5mm; String spread(center to center) is 7mm.
  • 100% new, package included: 1 pair guitar string trees, 2pcs mounting screws. Great replacement for your broken, dirty or old string retainer.
  • See more on Amazon...

Brand: Metallor   |   Manufacturer: Sunsmile

Item Dimensions: 0.12 x 0.22 x 0.41 inches (0.3 x 0.6 x 1.0 cm)   |   Package Dimensions: 0.35 x 3.43 x 5 inches (0.9 x 8.7 x 12.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Dopro Black Metal Curved Base Bottom Jack Plate Square Jackplate fits Gibson LP Les Paul

Model: J724-Dopro   |    Mpn: 4334370491   |    Ean: 0647731179898   |    PartNumber: 4334370491   |   Asin: B075677TZS

Features

  • Made of Metal;
  • Dimension: 35.1 x 34.9 (mm); Screw holes distance from center to center: about 25 x 25.4 (mm); Central hole diameter: 10mm
  • Curved Bottom for most Gibson Les Pauls; Please be sure to verify the dimensions carefully before you order the item
  • Please contact us when you have problem with the item before leaving feedback, we will try our best to serve you as soon as we receive your message
  • Package includes: 1x Jackplate with screws
  • See more on Amazon...

Brand: Dopro   |   Manufacturer: Dopro

Package Dimensions: 0.59 x 3.31 x 3.94 inches (1.5 x 8.4 x 10.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Golden Age Roller Bridge, Chrome

Model: #AN1275   |    Mpn: AN1275   |    PartNumber: AN1275   |   Asin: B01N6U2EJ1

This is the only roller bridge that matches the 12" radius of the Nashville Tune-O-Matic. Low-friction brass roller saddles let the strings move freely and return to accurate pitch.

We designed this bridge to work with Bigsby vibratos, in place of the Nashville Tune-o-matic. This is the only roller bridge that matches the 12" radius of the Nashville, so you maintain the string action you're used to. We gave it a low profile to keep the strings clear of the bridge body too, eliminating a frequent source of vibrato problems.

Thumbwheel height-adjustment studs and knurled bushings are included.

Specs:

String spread: 2-1/16" Saddle radius: 12" Stud spacing: 2-29/32" Stud threads: M5 x .8 About bridge & tailpiece measurements:

String spread is the distance between the centers of the outer strings on a bridge or tailpiece. Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard. Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece. Bridge is made of plated zinc, with brass rollers.

Features

  • This is the only roller bridge that matches the 12" radius of the Nashville Tune-O-Matic
  • We gave it a low profile to keep the strings clear of the bridge body, eliminating a frequent source of vibrato problems
  • Low-friction brass roller saddles let the strings move freely and return to accurate pitch
  • Bridge is supplied with thumbwheel height-adjustment studs and knurled bushings
  • String spread is 2-1/16, saddle radius is 12, and stud spacing is 2-29/32; stud threads measure M5 x .8
  • See more on Amazon...

Brand: Golden Age   |   Manufacturer: StewMac

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Musiclily 1/4" Guitar Loaded Mono Output Jack Plate Input Socket for Fender Stratocaster Strat ST Electric Guitar, Black

Model: MX0156   |    Ean: 0700115946995   |   Asin: B00YRIBN70

Features

  • Boat style Mono guitar output jack plate for Fender Stratocaster Squier style guitars
  • With 1/4 inch (6.35mm ) input jack; Screws Spacing 2-13/16 inch (71mm)
  • Material: metal alloy;Color: Black
  • Includes mounting screws
  • Package includes : 1 Pc guitar jack
  • See more on Amazon...

Brand: Musiclily   |   Manufacturer: Musiclily

Package Dimensions: 0.79 x 1.81 x 2.2 inches (2.0 x 4.6 x 5.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Musiclily Electric Guitar 5 Way Pickup Selector toggle Switch, Black and White Tips (Pack of 2)

Model: SYQKG-04   |    Mpn: 4334249097   |    Ean: 0632963176432   |    PartNumber: 4334249097   |   Asin: B00G8IV9MG

Features

  • Ideal for for Fender TELECAST Tele electric guitar
  • Imported style, 8 foot, No.4 and 5 feet are linked, so you can use it as a 7 foot switch
  • Metric Size is popular in guitars bass made outside the USA/Mexico
  • Comes with black and white plastic tip and screws,ready to use
  • Package includes : 2 pcs 5 way switch
  • See more on Amazon...

Brand: Musiclily

Item Dimensions: 1.97 x 1.97 x 1.18 inches (5.0 x 5.0 x 3.0 cm)   |   Package Dimensions: 0.71 x 2.13 x 2.6 inches (1.8 x 5.4 x 6.6 cm)

Warranty: 30 days money back.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

KAISH Stereo Copper Guitar Bass 1/4" Barrel Jack Cylinder Input Output Jacks with 4 Pins Stereo or Mono Jack Chrome

Model: K838   |    Mpn: 4334248893   |    PartNumber: 4334248893   |   Asin: B0768SBHPM

Made of Copper with High quality

Features

  • Inside hole diameter: 1/4" (6.35mm); Thread diameter: 11.8mm;
  • Length without poles: about 39.5mm; Total length including poles: about 48.5mm
  • This is a very good quality Barrel Jack with 4 pins,but not those inferior jacks made in cheap factories
  • 4 Pins Stereo Jack (The shorter two pins are main conductor pins); Of course, you can use this item as Mono Jack as well
  • Package includes: 1x Barrel Jack
  • See more on Amazon...

Brand: KAISH   |   Manufacturer: Kaish Music

Package Dimensions: 0.43 x 3.27 x 4.25 inches (1.1 x 8.3 x 10.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Gold Metal Jack Plate for Gibson Les Paul Guitar Square Curved with Screws by VINTAGE FORGE | JPS30-GLD

Asin: B07N5K6BYS

This high quality metal jack plate for Gibson Les Paul style guitar comes complete with (4) mounting screws. The jack plate has a slight curve to match the slight curve of the guitar body. These will also work perfectly on many Epiphone Les Paul guitars but we highly advise you measure your instrument first to be sure.

Features:

High quality metal (Gold Finish) 4 color matched mounting screws included Vintage Forge Factory Sealed Packaging Part #JPS30-GLD Dimensions:

Length: 1 3/8 in. (34.7mm) Width: 1 3/8 in. (34.7mm) Metal Thickness: 1/16 in. (1.7mm) Jack Hole: 3/8 in. (9.7mm) Screw Hole Spacing: 1 in. (25.4mm)

Features

  • PROFESSIONAL QUALITY - Metal Curved Square Jack Plate in Gold Finish
  • HARDWARE INCLUDED - Easy to install with (4) color matching screws included
  • TRADITIONAL FIT - Perfect replacement for most Gibson Les Paul guitars. Will also fit some Epiphone Les Paul and other similar brands (*measure first to be sure.)
  • DIMENSIONS: Length: 1 3/8 in. (34.7mm) Width: 1 3/8 in. (34.7mm) Metal Thickness: 1/16 in. (1.7mm) Jack Hole: 3/8 in. (9.7mm) Screw Hole Spacing: 1 in. (25.4mm)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.5 x 5 x 6.25 inches (1.3 x 12.7 x 15.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Chrome Roller String Tree Retainer Guides (Set of 2) for Fender Stratocaster Telecaster Electric Guitar by VINTAGE FORGE | RST80-CHR

Asin: B07MZ95NLG

Vintage Forge high quality vintage Roller style string tree retainer guide (Set of 2) for Fender Stratocaster, Telecaster and other similar style guitars. Optimizes string tension and helps minimize tuning problems. Includes (2) string guides, (2) mounting screws. We highly recommend pre-drilling a 1/16" pilot hole to avoid damaging the screw.

Features:

High quality metal (Chrome Finish) Includes: (2) guides, (2) screws Dimensions: Height 12mm (15/32 in.) Width 10mm (25/64) String Spacing approx 6.5mm (1/4 in.) Screw length 16mm (5/8 in.) | exposed length 9.5mm (3/8 in.) Vintage Forge Factory Sealed Packaging Part #RST80-CHR

Features

  • PROFESSIONAL QUALITY - Roller String Tree Retainer Guides (2) in NICKEL Finish
  • OPTIMIZES STRING TENSION - Helps minimize tuning problems.
  • HARDWARE INCLUDED - Easy to install with color matching screws. We highly recommend pre-drilling a 1/16 pilot hole to avoid damaging the screw.
  • DIMENSIONS: Height 12mm (15/32 in.) Width 10mm (25/64) | String Spacing approx 6.5mm (1/4 in.) | Screw length 16mm (5/8 in.) Exposed screw length 9.5mm (3/8 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging.
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.31 x 4.92 x 6.18 inches (0.8 x 12.5 x 15.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Canomo 3 Packs 6mm Thread Metal Single Tremolo Arm Whammy Bar with Tip and 3 Pieces Extra Tremolo Arm Tips for Stratocaster Electric Guitar Tremolo System

 Ean: 0741025102941   |   Asin: B07D9QD81V


Features:
Material: metal and plastic.
Color: chrome, black and gold.
Lenth: 16.6cm.
Thread size is 6mm in diameter.
Fits For Floyd Rose electric guitar single tremolo bridge system.

Package includes:
3 Pieces single tremolo arm
3 Pieces plastic end caps

Note:
Our tremolo arm screw fit with a 6mm thread; Please check your guitar before you buy.

Features

  • Color: chrome, black and gold. Material: metal and plastic
  • Length: 16.6cm/ 6.5inch.Thread size is 6mm in diameter
  • Electric guitar tremolo whammy arm bar crank handle with end cap
  • Fits For Floyd Rose electric guitar single tremolo bridge system
  • Package includes: 3 pieces single tremolo arm with plastic tip and extra 3 pieces plastic end caps (whith, yellow and black)
  • See more on Amazon...

Brand: Canomo   |   Manufacturer: Canomo

Package Dimensions: 0.5 x 2 x 8 inches (1.3 x 5.1 x 20.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Musiclily Boat Style Blank Jackplate Electric Guitar Output Jack Plate for Fender Strat Stratocater Guitar, Gold(Pack of 2)

Model: MX0850RG-2   |    Ean: 0700115953108   |   Asin: B01IB7V5I4

Features

  • Ideal for Stratocaster guitar
  • Boat style, mounting Screw hole center to center is 70mm
  • Made by metal
  • Color:Gold
  • Package Includes: 2 pcs Guitar jackplate
  • See more on Amazon...

Brand: Musiclily   |   Manufacturer: Musiclily

Package Dimensions: 0.63 x 2.68 x 3.86 inches (1.6 x 6.8 x 9.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Chrome Oval Boat Style 1/4" Electric Guitar Pickup Jack Output Input Socket FD Strat Plug

Model: C3J4X037   |    Mpn: C3J4X037   |    Ean: 0701304997804   |    PartNumber: C3J4X037   |   Asin: B00QRJHS9O

100% Brand new,never used This is a mono Electric guitar output jack plate. Width at the widest point of the plate: 2.7cm Has 3 Total Prongs Measurement between the centre of the 2 screw holes: 3.8cm Replace your worn out parts Boat Style (Oval Indented) Standard recessed oval plate which is used commonly on some LP SG guitars Color:chrome Package Include:1x Chrome jack plate

Features

  • Replace your worn out parts Boat Style (Oval Indented)
  • Standard recessed oval plate which is used commonly on some LP SG guitars
  • Has 3 Total Prongs
  • See more on Amazon...

Brand: JIUWU   |   Manufacturer: JiuWu

Package Dimensions: 0.2 x 1.4 x 3 inches (0.5 x 3.6 x 7.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Greenten Loaded Jack Socket Plate with Screws for FD Strat Stratocaster Electric Guitar Replacement (Black)

Model: 4334370289   |    Mpn: MUSI0032   |    Ean: 0634458703727   |    PartNumber: MUSI0032   |   Asin: B01J50T2UE



100% Brand New

Design for strat style electric guitars

Material: Metal

Package includes :

1 Loaded Jack Socket Plate with Screws







Features

  • 100% Brand New
  • Design for strat style electric guitars
  • Material: Metal
  • Package includes : 1 Loaded Jack Socket Plate with Screws
  • See more on Amazon...

Brand: Greenten   |   Manufacturer: Shenzhen Greenten Co.,Ltd

Package Dimensions: 0.1 x 0.3 x 3.1 inches (0.3 x 0.8 x 7.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Chrome Pickguard Mounting Bracket for Gibson Epiphone Les Paul Electric Guitar with Screws by VINTAGE FORGE | LPB20-CHR

Asin: B07MWYL77R

Vintage Forge Metal Pickguard Mounting Bracket for Gibson / Epiphone Les Paul Guitars and others. Hardware included.

Features:

High quality metal (Chrome Finish) Color matched mounting hardware included Vintage Forge Factory Sealed Packaging Part #LPB20-CHR Dimensions:

Length: 2 1/4 in. (57.5mm) Width: 27/64 in. (10.6mm) Height: 1 in. (25.5mm)

Features

  • PROFESSIONAL QUALITY - Pickguard Mounting Bracket in CHROME Finish
  • TRADITIONAL FIT - Works with Gibson, Epiphone, and other Les Paul style guitars
  • HARDWARE INCLUDED - Easy to install with color matching mounting hardware
  • DIMENSIONS - Length: 2 1/4 in. (57.5mm) | Width: 27/64 in. (10.6mm) | Height: 1 in. (25.5mm)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.5 x 5 x 6.25 inches (1.3 x 12.7 x 15.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Chrome Top Mount Loading String-Thru Body Ferrules for Electric Guitar (Set of 6) by VINTAGE FORGE | SF140-CHR

Asin: B07MZF8M6J

Vintage Forge CHROME Top Loading String-Thru Body Ferrules for Electric Guitar (Set of 6).

Features:

High quality metal (Chrome Finish) Complete set of (6) ferrules Vintage Forge Factory Sealed Packaging Part #SF140-CHR Dimensions:

Total Height: 11/32 in. (9mm) Shaft Height: 9/32 in. (7mm) Head Diameter: 9/32 in. (7mm) Shaft Diameter: 13/64 in. (5mm)

Features

  • PROFESSIONAL QUALITY - String-thru Body Top Loading Guitar Ferrules (6) in CHROME Finish
  • COMPLETE SET - Include six (6) ferrules
  • DIMENSIONS - Total Height: 11/32 in. (9mm) Shaft Height: 9/32 in. (7mm) Head Diameter: 9/32 in. (7mm) Shaft Diameter: 13/64 in. (5mm)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.16 x 4.92 x 6.14 inches (0.4 x 12.5 x 15.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Black Top Mount Loading String-Thru Body Ferrules for Electric Guitar (Set of 6) by VINTAGE FORGE | SF140-BLK

Asin: B07MZF88HL

Vintage Forge BLACK Top Loading String-Thru Body Ferrules for Electric Guitar (Set of 6).

Features:

High quality metal (Black Finish) Complete set of (6) ferrules Vintage Forge Factory Sealed Packaging Part #SF140-BLK Dimensions:

Total Height: 11/32 in. (9mm) Shaft Height: 9/32 in. (7mm) Head Diameter: 9/32 in. (7mm) Shaft Diameter: 13/64 in. (5mm)

Features

  • PROFESSIONAL QUALITY - String-thru Body Top Loading Guitar Ferrules (6) in BLACK Finish
  • COMPLETE SET - Include six (6) ferrules
  • DIMENSIONS - Total Height: 11/32 in. (9mm) Shaft Height: 9/32 in. (7mm) Head Diameter: 9/32 in. (7mm) Shaft Diameter: 13/64 in. (5mm)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.16 x 4.96 x 6.1 inches (0.4 x 12.6 x 15.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Chrome Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | JP110-CHR

Asin: B07MBZM6XF

High quality output jack plate for Fender Stratocaster and similar guitars. Used on nearly every Stratocaster (US and Mexico) manufactured from '54-Present. Includes (2) mounting screws.

Features:

High quality metal (Chrome Finish) (2) color matching mounting screws included Length: 81mm (3 3/16 in.) Height: 16.5mm (5/8 in.) Hole spacing center to center: 70mm (2 3/4 in.) Vintage Forge Factory Sealed Packaging Part #JP110-CHR

Features

  • PROFESSIONAL QUALITY - Output Jack Plate in CHROME Finish
  • TRADITIONAL FIT - Used on many US & Mexican Fender Stratocasters
  • HARDWARE INCLUDED - Easy to install with (2) color matching screws included
  • DIMENSIONS - Length: 81mm (3 3/16 in.) | Height: 16.5mm (5/8 in.) | Hole spacing center to center: 70mm (2 3/4 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.67 x 4.92 x 6.1 inches (1.7 x 12.5 x 15.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Nickel Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | JP110-NKL

Asin: B07MPZT17D

High quality output jack plate for Fender Stratocaster and similar guitars. Used on nearly every Stratocaster (US and Mexico) manufactured from '54-Present. Includes (2) mounting screws.

Features:

High quality metal (Nickel Finish) (2) color matching mounting screws included Length: 81mm (3 3/16 in.) Height: 16.5mm (5/8 in.) Hole spacing center to center: 70mm (2 3/4 in.) Vintage Forge Factory Sealed Packaging Part #JP110-NKL

Features

  • PROFESSIONAL QUALITY - Output Jack Plate in NICKEL Finish
  • TRADITIONAL FIT - Used on many US & Mexican Fender Stratocasters
  • HARDWARE INCLUDED - Easy to install with (2) color matching screws included
  • DIMENSIONS - Length: 81mm (3 3/16 in.) | Height: 16.5mm (5/8 in.) | Hole spacing center to center: 70mm (2 3/4 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.67 x 4.92 x 6.1 inches (1.7 x 12.5 x 15.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

Black Metal Single Coil Pickup Mounting Ring for Fender Telecaster Guitar by VINTAGE FORGE | PRT10-BLK

Asin: B07PJCK4PQ

High quality metal single-coil pickup flat mounting ring surround for Fender Telecaster and other similar style guitars. Heavy duty Black finish. Includes (2) color matching body mounting screws.

Features:

High quality metal (Black Finish) (2) color matching body mounting screws included Vintage Forge Factory Sealed Packaging Part #PRT10-BLK
Dimensions:

Outer Dimensions: 3 15/16 in. (100mm) x 1 9/32in. (32.6mm) Interior Dimensions: 2 5/8 in. (66.9mm) x 5/8 in. (15.8mm) Body mounting holes spacing center to center: 3 37/64 in. (91mm) Pickup mounting holes spacing center to center: 2 55/64 in. (72.5mm) Screw holes diameter: 1/8 in. (3.3mm) Thickness: 1/8 in. (3.3mm)

Features

  • PROFESSIONAL QUALITY - Metal Single-Coil Pickup Mounting Ring in BLACK Finish.
  • HARDWARE INCLUDED - Easy to install with (2) color matching body screws included
  • TRADITIONAL FIT - A great replacement for most Fender Telecaster single coil pickups and other similar brands (*measure first to be sure.)
  • DIMENSIONS - Outer Dimensions: 3 15/16 in. (100mm) x 1 9/32in. (32.6mm) Interior Dimensions: 2 5/8 in. (66.9mm) x 5/8 in. (15.8mm) Body mounting holes spacing center to center: 3 37/64 in. (91mm) Pickup mounting holes spacing center to center: 2 55/64 in. (72.5mm) Screw holes diameter: 1/8 in. (3.3mm) Thickness: 1/8 in. (3.3mm)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.25 x 5 x 6.25 inches (0.6 x 12.7 x 15.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

Black Vintage String Tree Retainer Guide (Set of 2) for Fender Stratocaster Strat Guitar by VINTAGE FORGE | SRT60-BLK

Asin: B07MYBRBJR

Vintage Forge high quality vintage butterfly style string tree retainer guide (Set of 2) for Fender Stratocaster and other similar style guitars. Includes (2) string guides, (2) mounting screws, and (2) barrel spacers. We highly recommend pre-drilling a 1/16" pilot hole to avoid damaging the screw.



Features:

High quality metal (Black Finish) Includes: (2) guides, (2) screws, and (2) height spacers Retainer Dimensions: Length 11mm (7/16 in.) Width 5.8mm (15/64) Height 2.6mm (7/64 in.) Spacer Dimensions: Width 5mm (13/64) Height 4mm (5/32 in.) Vintage Forge Factory Sealed Packaging Part #SRT60-BLK

Features

  • PROFESSIONAL QUALITY - Vintage String Tree Retainer Guides (2) in BLACK Finish
  • TRADITIONAL FIT - Works with Fender Stratocaster & Telecaster and other similar style guitars
  • HARDWARE INCLUDED - Easy to install with color matching screws and spacers. We highly recommend pre-drilling a 1/16 pilot hole to avoid damaging the screw.
  • DIMENSIONS: Length 11mm (7/16 in.) Width 5.8mm (15/64) Height 2.6mm (7/64 in.) | Spacer Dimensions: Width 5mm (13/64) Height 4mm (5/32 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.25 x 5 x 6.25 inches (0.6 x 12.7 x 15.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

Gold Roller String Tree Retainer Guides (Set of 2) for Fender Stratocaster Telecaster Electric Guitar by VINTAGE FORGE | RST80-GLD

Asin: B07MZB5NVX

Vintage Forge high quality vintage Roller style string tree retainer guide (Set of 2) for Fender Stratocaster, Telecaster and other similar style guitars. Optimizes string tension and helps minimize tuning problems. Includes (2) string guides, (2) mounting screws. We highly recommend pre-drilling a 1/16" pilot hole to avoid damaging the screw.

Features:

High quality metal (Gold Finish) Includes: (2) guides, (2) screws Dimensions: Height 12mm (15/32 in.) Width 10mm (25/64) String Spacing approx 6.5mm (1/4 in.) Screw length 16mm (5/8 in.) | exposed length 9.5mm (3/8 in.) Vintage Forge Factory Sealed Packaging Part #RST80-GLD

Features

  • PROFESSIONAL QUALITY - Roller String Tree Retainer Guides (2) in GOLD Finish
  • OPTIMIZES STRING TENSION - Helps minimize tuning problems
  • HARDWARE INCLUDED - Easy to install with color matching screws. We highly recommend pre-drilling a 1/16 pilot hole to avoid damaging the screw.
  • DIMENSIONS: Height 12mm (15/32 in.) Width 10mm (25/64) | String Spacing approx 6.5mm (1/4 in.) | Screw length 16mm (5/8 in.) | exposed length 9.5mm (3/8 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.31 x 4.88 x 6.18 inches (0.8 x 12.4 x 15.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #34

Gold Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | JP110-GLD

 PartNumber: 43528-15830   |   Asin: B07MPS1TGT

High quality output jack plate for Fender Stratocaster and similar guitars. Used on nearly every Stratocaster (US and Mexico) manufactured from '54-Present. Includes (2) mounting screws.

Features:

High quality metal (Gold Finish) (2) color matching mounting screws included Length: 81mm (3 3/16 in.) Height: 16.5mm (5/8 in.) Hole spacing center to center: 70mm (2 3/4 in.) Vintage Forge Factory Sealed Packaging Part #JP110-GLD

Features

  • PROFESSIONAL QUALITY - Output Jack Plate in GOLD Finish
  • TRADITIONAL FIT - Used on many US & Mexican Fender Stratocasters
  • HARDWARE INCLUDED - Easy to install with (2) color matching screws included
  • DIMENSIONS - Length: 81mm (3 3/16 in.) | Height: 16.5mm (5/8 in.) | Hole spacing center to center: 70mm (2 3/4 in.)
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.55 x 4.92 x 6.06 inches (1.4 x 12.5 x 15.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #35

Guitar Strap Buttons Gold Oversized Large 17mm Universal Fit for Acoustic/Electric Guitar & Bass (2) with Screws & Felt Washers by VINTAGE FORGE | SB140-GLD

Asin: B07MF34SPG

Features: High quality Vintage Forge Gold metal strap button set comes complete with 2 buttons, 2 matching screws, and 4 felt washers (both black and white). These are oversized large strap buttons and will fit virtually any Acoustic or Electric Guitar, Bass, Mandolin and Ukulele. Easy to install.

Specifications:

Material: Metal
Finish: Gold
Button Diameter: 17mm
Height: 10mm
Screw Length: 25mm (16mm exposed)
Weight: 16g (0.6oz)


Features

  • PROFESSIONAL QUALITY - Metal Strap Button Pins in GOLD Finish
  • UNIVERSAL FIT - Will fit virtually any Acoustic / Electric Guitar, Bass, Ukulele, or Mandolin
  • COMPLETE SET - 2 Buttons, 2 Color Matched Screws, 2 pairs of Felt Washers Black / White
  • EASY TO INSTALL - Convenient to use
  • BRAND NEW - Vintage Forge Factory Fresh Packaging
  • See more on Amazon...

Brand: Vintage Forge   |   Manufacturer: Vintage Forge

Package Dimensions: 0.28 x 4.96 x 6.06 inches (0.7 x 12.6 x 15.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Chrome Pickguard Mounting Bracket for Gibson Epiphone Les Paul Electric Guitar with Screws by VINTAG...
  2. Chrome Top Mount Loading String-Thru Body Ferrules for Electric Guitar (Set of 6) by VINTAGE FORGE |...
  3. Black Top Mount Loading String-Thru Body Ferrules for Electric Guitar (Set of 6) by VINTAGE FORGE | ...
  4. Chrome Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | ...
  5. Nickel Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | ...
  6. Black Metal Single Coil Pickup Mounting Ring for Fender Telecaster Guitar by VINTAGE FORGE | PRT10-B...
  7. Black Vintage String Tree Retainer Guide (Set of 2) for Fender Stratocaster Strat Guitar by VINTAGE ...
  8. Gold Roller String Tree Retainer Guides (Set of 2) for Fender Stratocaster Telecaster Electric Guita...
  9. Gold Jack Plate for Fender Stratocaster Strat Guitar Recessed Output Jackplate by VINTAGE FORGE | JP...
  10. Guitar Strap Buttons Gold Oversized Large 17mm Universal Fit for Acoustic/Electric Guitar & Bass...

Most Wished For

  1. Fender Pickguard Screws
  2. Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
  3. Seismic Audio - SAGA25 - Replacement Chrome Strat-Style Tremolo Bridge Set for Strat Style Electric ...
  4. Musiclily 1/4" 6.35mm Rectangular Mono Guitar Output Jack Plate Input Socket for Gibson Les Paul Epi...
  5. Honbay 10Pcs 1/4" Mono Jack Socket Stratocaster Replacement for Bass Electric Guitar
  6. Fender Pickguard/Control Plate Mounting Screws - Gold
  7. Metallor Roller String Trees String Retainer Guides Compatible with Strat Tele Style Electric Guitar...
  8. Dopro Black Metal Curved Base Bottom Jack Plate Square Jackplate fits Gibson LP Les Paul
  9. Golden Age Roller Bridge, Chrome
  10. Musiclily 1/4" Guitar Loaded Mono Output Jack Plate Input Socket for Fender Stratocaster Strat ST El...

Most Gifted

  1. Fender Pickguard Screws
  2. Musiclily Electric Guitar 5 Way Pickup Selector toggle Switch, Black and White Tips (Pack of 2)
  3. KAISH Stereo Copper Guitar Bass 1/4" Barrel Jack Cylinder Input Output Jacks with 4 Pins Stereo or M...
  4. Gold Metal Jack Plate for Gibson Les Paul Guitar Square Curved with Screws by VINTAGE FORGE | JPS30-...
  5. Chrome Roller String Tree Retainer Guides (Set of 2) for Fender Stratocaster Telecaster Electric Gui...
  6. Canomo 3 Packs 6mm Thread Metal Single Tremolo Arm Whammy Bar with Tip and 3 Pieces Extra Tremolo Ar...
  7. Musiclily Boat Style Blank Jackplate Electric Guitar Output Jack Plate for Fender Strat Stratocater ...
  8. Chrome Oval Boat Style 1/4" Electric Guitar Pickup Jack Output Input Socket FD Strat Plug
  9. Greenten Loaded Jack Socket Plate with Screws for FD Strat Stratocaster Electric Guitar Replacement ...
  10. Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware

Top Selling

  1. Fender Pickguard Screws
  2. Pure Tone Full-contact Output Jack for Guitar/Bass, with Mounting Hardware
  3. set of 4 Guitar nuts, washers & lock washers for US CTS Pots & Switchcraft Jacks, metal (shi...
  4. Honbay 10Pcs 1/4" Mono Jack Socket Stratocaster Replacement for Bass Electric Guitar
  5. Electrosocket Jack Plate for Telecasters® - Polished Nickel Finish
  6. Dopro Set of 6 Chrome Guitar String Through Body 5/16" String Ferrules for American Standard Telecas...
  7. Musiclily Metric 3 Way Short Straight Guitar Toggle Switch for Gibson Epiphone Les Paul Electric Gui...
  8. Musiclily Vintage Roller Guitar String Tree Guides Retainer for Fender Strat Stratocaster Tele Telec...
  9. Kmise Z3718 Black Tip ST Style Tremolo Arm Whammy Bar Fits Strat Guitar
  10. Dopro Nickel Metal Curved Base Bottom Jack Plate Square Jackplate fits Gibson LP Les Paul



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.