Frontpage > Electronics > Photo > Telescope Motor Drives

Best Telescope Motor Drives - Buying Guide

Last Updated: 06/15/2019

Share on

Bestselling Telescope Motor Drives on Amazon

  1. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  2. STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
  3. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)
  4. Celestron R/A Single Axis Motor Drive for the AstroMaster Telescope
  5. STEPPERONLINE Nema 17 Bipolar Stepper Motor 0.7A 13Ncm (18.4oz.in) 17HS10-0704S
  6. DC Motor and Stepper FeatherWing Add-on For All Feather Boards
  7. Celestron 93522 Dual Axis Motor Drive (Advanced CG4)
  8. RilexAwhile DC 3V 3500RPM Mini Vibration Motor Arbitrary Direction for Cell Phone 4mm x 8mm( 20 pcs)
  9. Adafruit Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [ADA807]
  10. Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino...

  #1

STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC

Model: 17HS08-1004S   |    Mpn: 17HS08-1004S   |    Ean: 4139052218043   |    PartNumber: 17HS08-1004S   |   Asin: B00PNEQ79Q

This is Short Height Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in). Electrical Specification: * Manufacturer Part Number: 17HS08-1004S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 13Ncm(18.4oz.in) * Rated Current/phase: 1.0A * Phase Resistance: 3.5ohms * Inductance: 4.5mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 20mm * Shaft Diameter: 5mm * Shaft Length: 20mm * D-cut Length: 16.5mm * Number of Leads: 4 * Lead Length: 400mm * Weight: 140g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Features

  • Short Height
  • 13Ncm(18.4oz.in) holding torque
  • NEMA 17 bipolar 1.65x1.65x0.79 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 1.0A & resistance 3.5ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 0.79 x 1.65 x 1.65 inches (2.0 x 4.2 x 4.2 cm)   |   Package Dimensions: 2.7 x 2.8 x 4.4 inches (6.9 x 7.1 x 11.2 cm)

Amazon Price: $10.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC

Model: 17HS16-2004S   |    Mpn: 17HS16-2004S   |    Ean: 0701056337583   |    PartNumber: 17HS16-2004S   |   Asin: B00PNEQI7W

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in).
It's ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.
The motor is supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print!

100% brand new of "STEPPERONLINE", and ROHS and CE certificated.


Electrical Specification:

* Manufacturer Part Number: 17HS16-2004S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 45Ncm(63.7oz.in)
* Rated Current/phase: 2A
* Phase Resistance: 1.1ohms
* Inductance: 2.6mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm
* Body Length: 40mm
* Shaft Diameter: 5mm
* Shaft Length: 23mm
* D-cut Length: 21mm
* Number of Leads: 4
* Lead Length: 1000mm
* Weight: 310g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

* As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor.
* To choose a driver, please make sure the driver's output current not higher than motor rated current, and voltage not higher than 36V.
* Please take care of four wires coils order when you connecting to driver, or it will damage your driver.


Features

  • Hot Sale! High Torque
  • 45Ncm(63.7oz.in) holding torque
  • NEMA 17 bipolar 1.65x1.65x1.57 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 2A & resistance 1.1ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 1.65 x 1.57 x 1.65 inches (4.2 x 4.0 x 4.2 cm)   |   Package Dimensions: 4.2 x 4.4 x 6.6 inches (10.7 x 11.2 x 16.8 cm)

Amazon Price: $12.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)

Model: 4332013342   |    Mpn: 112108A2NKL5005   |    Ean: 8884161855783   |    PartNumber: 112108A2NKL5005   |   Asin: B00ODQM8KC

Description The item is a set of 10pcs professional and practical L293D step motor driver chips, which are mainly made of durable hard alloy and plastic materials, and features 16-pin design and channel channel capability up to 600mAh output current. With over-temperature protection and easy to use, it is really a wonderful L293D stepper motor drive for choice. Features - Color: mainly black. - Material: durable hard alloy and plastic. - 100% brand new and high quality L293D DIP 16-pin IC Stepper Motor Drive Controlle. - Channel Capability: 600mA output current / channel. - Peak Output Current: 1.2A / Channel (non repetitive). - Enable facility. - Over temperature protection. - Logical /0/ input voltage up to 1.5V (High noise immunity). - Internal clamp diodes. - Pin No: 16 pi. Absolute Maximum Ratings - Vs Supply voltage: 36V. - Vss Logic Supply Voltage: 36V. - Vi Input signals: 7V. - Ven Enable Voltage: 7V. - Io Peak Output Current (100 mu;s non repetitive): 1.2A. - Ptot Total Power Dissipation at Tpi: 90deg;C, 4W. - Tstg, Tj Storage and Junction temperature: -40deg;C to 150deg;C. -------------------------------------------------------- Package Including 10 * L293D DIP 16-pin IC Stepper Motor Drive Controlle (Black)

Features

  • Color: mainly black. Material: durable hard alloy and plastic.
  • L293D DIP 16-pin IC Stepper Motor Drivers Controllers.
  • Channel Capability: 600mA output current channel.
  • Peak Output Current: 1.2A Channel (non repetitive).
  • Enable facility. Over temperature protection. Pin No: 16 pins.
  • See more on Amazon...

Brand: Pixnor®   |   Manufacturer: PIXNOR

Item Dimensions: 0.91 x 1 x 1.31 inches (2.3 x 2.5 x 3.3 cm)   |   

Amazon Price: $8.39 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Celestron R/A Single Axis Motor Drive for the AstroMaster Telescope

Model: 93514   |    Mpn: 93514   |    Ean: 3609920102442   |    PartNumber: 93514   |   Asin: B00039R23G

Add right ascension (RA) tracking capabilities to any Celestron AstroMaster or PowerSeeker equatorial telescope, or any set-up that uses a Celestron CG-2 or CG-3 equatorial mount. This easy-to-install RA motor drive compensates for the Earth s rotation, so the telescope tracks a star s movement through the night sky from east to west. When the telescope mount is properly polar aligned and the RA drive is attached and running, the user need only make occasional adjustments in declination (Dec) to keep an object in the eyepiece for long periods of time. The Celestron single-axis motor drive runs on a 9V battery, so there are no cords to get in the way. The drive can be used in either the Northern or Southern Hemisphere. To change hemispheres (reverse the motor s direction), simply flip the North/South (N/S) switch on the face of the motor drive. It is also simple to change the speed of the motor. A Speed Rate Regulator knob is located just under the power indicator, and can be turned in either direction to slow down or speed up the motor. Since solar system objects like the Sun and, Moon move through the sky at different rates than deep-sky objects do, this gives you the ability to match the motor s speed to the particular type of object you are observing.

Features

  • Install this motor drive on your AstroMaster or PowerSeeker equatorially mounted telescope and start tracking the stars!
  • Right Ascension tracking compensates for the Earth's rotation
  • Can be used in the Northern or Southern Hemisphere
  • For Celestron CG-2 and CG-3 equatorial mounts
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 29 x 9.25 x 17.75 inches (73.7 x 23.5 x 45.1 cm)   |   Package Dimensions: 3.54 x 3.7 x 7.56 inches (9.0 x 9.4 x 19.2 cm)

Amazon Price: $29.69 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.95

Warranty: 2 years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

DC Motor and Stepper FeatherWing Add-on For All Feather Boards

Model: COMINU053369   |    Mpn: 2927   |    Ean: 0743724369311   |    PartNumber: 2927   |   Asin: B01ABIB2UC

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!

The original Adafruit Motorshield Kit is one of our most beloved kits, which is why we decided to squish it all together on a FeatherWing to make something even smaller, lighter, and more portable! Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C.

Since the FeatherWing only uses the I2C (SDA & SCL pins), it works with any and all Feathers- ATmega32u4, ATSAM M0 or ESP8266-based. You can stack it with any other FeatherWing or with itself (just make sure you have each wing with a unique I2C address).

Comes with an assembled & tested FeatherWing, terminal blocks & plain header. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time. Feather and motors are not included but we have lots of motors in the shop. You can use any DC or stepper motors that run from 4.5-13.5VDC and draw under 1.2A (3A peak) per coil. You'll likely also need to provide some external power supply for your motors, since its not suggested you run motors from the Feather's lipoly battery.

Please note that unlike the full sized shield, there's no servo connections (they wouldnt fit!) So if you need a bunch of servos, check out our 8-channel Servo Featherwing.

Technical Details
Dimensions: 50.8mm x 22.9mm x 1.6mm / 2" x 0.9" x 0.06"
Weight: 4.6g

Features

  • 4 full H-Bridges: the TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 12-bit speed selection (so, about 0.02% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big 3.5mm terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • See more on Amazon...

Brand: Adafruit   |   Manufacturer: Adafruit

Package Dimensions: 0.2 x 3 x 3.5 inches (0.5 x 7.6 x 8.9 cm)

Amazon Price: $19.95 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Celestron 93522 Dual Axis Motor Drive (Advanced CG4)

Model: 93522   |    Mpn: 93522   |    Ean: 0799472239918   |    PartNumber: 93522   |   Asin: B0000C3WBB

Add tracking and tracking correction capabilities to any setup that uses a Celestron CG-4 equatorial mount. The right ascension motor drive allows the telescope to track a star s movement through the night sky, and the addition of a declination motor gives you the ability to make adjustments in all four directions with the included drive corrector hand controller. With this drive system mounted on a properly polar-aligned telescope, the user can do visual observations or sketches without objects constantly drifting out of the field if view. Astrophotography is also possible when a mount has dual-axis drive with drive corrector capabilities. The Celestron dual-axis motor drive system is powered by four D-cell batteries in a self-contained battery pack. The drive can be used in either the Northern or Southern Hemisphere. To change hemispheres (reverse the motor s direction), simply flip the N/Off/S switch on the drive corrector hand controller. The drive corrector hand controller can be used to move the telescope at different speeds. This is achieved by choosing the desired speed on a switch marked 2x/4x/8x. Twice the sidereal rate, or 2x, is used for guiding on a star when doing astrophotography. The 4x speed is used to center objects in the eyepiece. The 8x speed can be used for centering objects in the finderscope as well as the eyepiece. This package includes an RA and Dec motor, clutch, mounting brackets and hardware, drive corrector hand controller, and power pack.

Features

  • For telescopes equipped with CG-4 equatorial mount. C102HD-C4-R-CN 6
  • Designed for Celestron's CG-4 mount
  • Excellent for tracking in RA
  • Allows movement in DEC
  • Four speed variable
  • See more on Amazon...

Brand: Celestron   |   Manufacturer: Celestron

Item Dimensions: 3 x 4 x 5 inches (7.6 x 10.2 x 12.7 cm)   |   Package Dimensions: 2.8 x 8 x 12.5 inches (7.1 x 20.3 x 31.8 cm)

Amazon Price: $107.10 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $119.00 | Used Price: $110.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

RilexAwhile DC 3V 3500RPM Mini Vibration Motor Arbitrary Direction for Cell Phone 4mm x 8mm( 20 pcs)

Model: COMINU032724   |    Mpn: COMINU032724   |    Ean: 0606413702946   |    PartNumber: COMINU032724   |   Asin: B01M75B34L


Operates voltage: 2.5 " 4.0 VDC
Rated voltage: 3.0 VDC
Rated rotor speed: 3500RPM
Insulation resistance:10Mohm Min
Direction of rotation: arbitrary direction
Dimensions: 4mm x 8mm(D*H)
Made for vibration alerts in cell phones and pagers
Comes with a removable rubber boot with two leads

Features

  • Brand new; Product Name: Vibration Motor; Material: Electric Part
  • Rated: DC 3V; Rotary Speed: 3500PRM; Rated current: 70mA Max; Starting current: 90mA Max; Starting voltage: 2.3V DC Max
  • Oscillator Size: 4 x 2mm/ 0.16 x 0.08inch(D*H); Body Size: 4 x 8mm/ 0.16 x 0.31inch(D*H)
  • Can be operated in either direction simply reverse power supply polarity
  • Net Weight: 16g; Package Content: 20 x Vibration Motor
  • See more on Amazon...

Brand: RilexAwhile   |   Manufacturer: Bluesky

Amazon Price: $17.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Adafruit Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [ADA807]

Model: 100571   |    Mpn: 100571   |    Ean: 0701851952264   |    PartNumber: 100571   |   Asin: B00NAY2URO

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it. Or you can breadboard something on your own! Each chip contains two full H-bridges (four half H-bridges). That means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver There's a PWM input per driver so you can control motor speed. Runs at 5V logic. Good for motor voltages from 4.5V up to 36V! This wont work well for 3V motors. The motor voltage is separate from the logic voltage.

Features

  • Adafruit Part Number: 807
  • Stock Type: Components & Parts >> IC & Transistors
  • In Stock & Ready to Ship
  • See more on Amazon...

Brand: Adafruit   |   Manufacturer: Adafruit

Package Dimensions: 0.2 x 1.7 x 2.5 inches (0.5 x 4.3 x 6.4 cm)

Amazon Price: $2.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino (no Wire)

Model: SKU102820   |    Mpn: LK67   |    Ean: 0825349132508   |    PartNumber: LK67   |   Asin: B015RQ97W8

Longruner 5x Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino LK67 Features: - A, B, C, D four-phase LED indicates the status of the stepper motor work. - Stepper motor with a standard interface, when used directly pluggable. - 5 line 4 phase can be used for ordinary. ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking. - Rated Voltage: DC5V 4-phase - Insulation Resistance: >10M (500V) - Dielectric Strength: 600V AC / 1mA / 1s - Step angle: 5.625 x 1/64 - DC Resistance: 200 7% (25C) - Reduction ratio: 1/64 - Insulation Grade: A - No-load Pull in Frequency: >600Hz - No-load Pull out Frequency: >1000Hz - Pull in Torque: >34.3mN.m(120Hz) - Detent Torque: >34.3mN.m - Temperature Rise: 40K(120Hz) Package including: 5*set Uln2003 Stepper Motor 5*Driver Board

Features

  • 5pcs Stepper motor and driver board compatible with arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Motor diameter: 1.1 inches.Wire length 9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board.
  • We offer free sample and the tutorial for arduino beginner to people whom can make projects and review.
  • See more on Amazon...

Brand: Longruner   |   Manufacturer: Longruner

Package Dimensions: 1.7 x 4.8 x 6.5 inches (4.3 x 12.2 x 16.5 cm)

Amazon Price: $10.39 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Orion 7832 Dual Axis TrueTrack Telescope Drive

Model: 7832   |    Mpn: 7832   |    Ean: 0759270078324   |    PartNumber: 7832   |   Asin: B0000XMXS4

TrueTrack precision DC drives provide accurate, regulated tracking for SkyView Pro mounted telescopes. Dual-axis control is ideal for high-power viewing and astrophotography. Hand controller allows sidereal tracking in right ascension and electronic control of declination. Features 2x, 4x, and 8x speeds, plus pause mode. Thumbwheel clutches on both motors allow use of manual slow-motion controls if desired. Include two motors, hand controller, and battery pack (four D cells not included).

Features

  • Orion TrueTrack Dual-Axis electronic drive provides motorized dual-axis control for high-power viewing and astrophotography
  • Drive controller allows sidereal tracking and electronic control of declination
  • Features 2x, 4x, and 8x speeds and pause mode
  • Includes two motors, controller and battery pack
  • Requires 4 D-cell batteries for operation (not included)
  • See more on Amazon...

Brand: Orion   |   Manufacturer: Orion

Package Dimensions: 2.5 x 7.3 x 9.8 inches (6.4 x 18.5 x 24.9 cm)

Amazon Price: $162.83 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $162.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

iOptron 3200 SmartEQ Pro (White)

Model: 3200   |    Mpn: 3200   |    Ean: 6943831500964   |    PartNumber: 3200   |   Asin: B00B9JPIO4

Born out of the popular iOptron Cube(TM) and iEQ(TM) mounts, the SmartEQ(TM) Pro mount is the ultimate Grab N Go German equatorial GOTO mount fitting into almost everyone s budget. It is ideal for visual observation and wide field astrophotography. The compact design and light weight make travelling with the mount easy. The SmartEQ(TM) Pro is a fully computerized mount with a database of 59,000 objects. It offers the next generation GOTO technology from iOptron. The Go2Nova(TM) Hand Controller is intuitive with a large LCD screen, with which you can easily set up your telescope and select where you want to navigate. The Pro also features: metal gear, guiding port, and a polar scope. The SmartEQ(TM) Pro is universally compatible with optical tubes using a Vixen-style dovetail connection, making it useful for beginners as well as hobbyists with multiple tubes.

Features

  • Specialized Grab N' Go mount ideal for visual observer and wide field astro-photographer
  • Portable, compact, and sturdy German equatorial mount that is easy to travel with
  • Payload: 11 lb. (5 kg) (excluding counterweight), Mount weight: 6.2 lb. (2.8 kg), Tripod weight: 5.9 lbs.
  • Go2Nova(TM) 8408 controller with Advanced GOTONOVA Got Technology
  • Over 59,000 celestial objects built into the database for easy surfing
  • See more on Amazon...

Brand: iOptron   |   Manufacturer: iOptron

Item Dimensions: 10 x 8 x 40 inches (25.4 x 20.3 x 101.6 cm)   |   Package Dimensions: 8.1 x 9.5 x 40 inches (20.6 x 24.1 x 101.6 cm)

Amazon Price: $428.00 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $550.49

Warranty: 2 year parts & labor

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

STEPPERONLINE High Torque Low Current Nema 17 Stepper Motor 85oz.in/60Ncm 0.64A Extruder Motor

Model: 17HS24-0644S   |    Mpn: 17HS24-0644S   |    Ean: 0701056300181   |    PartNumber: 17HS24-0644S   |   Asin: B00PNEQP1G

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 640mA, allowing for a holding torque of 60Ncm(85oz.in). Electrical Specification: * Manufacturer Part Number: 17HS24-0644S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 60Ncm(85oz.in) * Rated Current/phase: 0.64A * Phase Resistance: 15ohms * Inductance: 13.2mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 60mm * Shaft Diameter: 5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 500mm * Weight: 500g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Features

  • High Torque with Low Current
  • 60Ncm(85oz.in) holding torque
  • NEMA 17 bipolar 1.65x1.65x2.36 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 0.64A & resistance 15ohms
  • See more on Amazon...

Brand: STEPPERONLINE   |   Manufacturer: OSM Technology Co.,Ltd.

Item Dimensions: 2.36 x 1.65 x 1.65 inches (6.0 x 4.2 x 4.2 cm)   |   Package Dimensions: 2.7 x 3 x 4.5 inches (6.9 x 7.6 x 11.4 cm)

Amazon Price: $25.00 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $37.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

6V dc 4 Wire 2 Phase Mini Stepper Motor Micro Stepper Motor Dia 10mm Linner Stepper Motor

 Ean: 0614134926794   |    PartNumber: 9423   |   Asin: B01NBJK1KG

Features

  • 2 Phase 4 Wire DC Stepper Motor. It is tiny motor, pls check its dimension clearly, make sure if you can handle it.
  • Motor diameter: 10MM; Motor length: 10.2MM; Motor shaft diameter: 2.9MM (is a mini bar) Output shaft length: 35MM;
  • Phase resistance: about 22ohm; 6V dc short circuit current: 240MA
  • Weight: 5.5g
  • Package: 1pc. It is fun to diy them, :)
  • See more on Amazon...

Brand: Unknown   |   Manufacturer: NON

Package Dimensions: 0.31 x 2.76 x 3.07 inches (0.8 x 7.0 x 7.8 cm)

Amazon Price: $5.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Orion 7827 EQ-2M Electronic Telescope Drive

Model: 7827   |    Mpn: 7827   |    Ean: 0759270078270   |    PartNumber: 7827   |   Asin: B0069VZQ44

Pop one of these precision mini-motors on a compatible Orion or Celestron equatorial mount and track celestial objects automatically. It'll make observing easier and more fun! Drive provides regulated sidereal-rate tracking in right ascension. Hand controller has 2x and 4x speeds and pause mode. External disengage allows coarse movement of the scope by hand with motor attached. Includes electronic motor, hand controller, and battery case. Powered by four D-cell batteries (not included).

Features

  • Precision mini-motor attaches to your Orion EQ-2 equatorial mount for motorized tracking of celestial objects
  • Electronic drive provides regulated sidereal-rate tracking in right ascension so you can automatically follow objects in the sky as they appear to migrate around Polaris
  • Drive hand controller has 2x and 4x speeds and pause mode
  • Includes motor, controller and battery case
  • See more on Amazon...

Brand: Orion   |   Manufacturer: Orion

Package Dimensions: 2.5 x 7.3 x 10.1 inches (6.4 x 18.5 x 25.7 cm)

Amazon Price: $84.04 | as of 06/15/2019(5:53pm pst)
Availibility:
List Price: $84.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino (with Wire)

Model: COMINU051094   |    Mpn: K67-1   |    Ean: 0190835381709   |    PartNumber: K67-1   |   Asin: B06X982PSL

Longruner 5x Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino LK67 Features: - A, B, C, D four-phase LED indicates the status of the stepper motor work. - Stepper motor with a standard interface, when used directly pluggable. - 5 line 4 phase can be used for ordinary. ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking. - Rated Voltage: DC5V 4-phase - Insulation Resistance: >10M (500V) - Dielectric Strength: 600V AC / 1mA / 1s - Step angle: 5.625 x 1/64 - DC Resistance: 200 7% (25C) - Reduction ratio: 1/64 - Insulation Grade: A - No-load Pull in Frequency: >600Hz - No-load Pull out Frequency: >1000Hz - Pull in Torque: >34.3mN.m(120Hz) - Detent Torque: >34.3mN.m - Temperature Rise: 40K(120Hz) Package including: 5*set Uln2003 Stepper Motor 5*Driver Board 1*40 Pin Dupont Wire

Features

  • 5pcs Stepper motor and driver board compatible with arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Motor diameter: 1.1 inches.Wire length 9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+40 Pin Dupont Wire .
  • We offer free sample and the tutorial for arduino beginner to people whom can make projects and review.
  • See more on Amazon...

Brand: Longruner   |   Manufacturer: Longruner

Package Dimensions: 1.9 x 3.8 x 7.9 inches (4.8 x 9.7 x 20.1 cm)

Amazon Price: $11.39 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.39 | Used Price: $10.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

50pcs 3-5V dc 4 Wire 2 Phase Micro Stepper Motor Mini Stepping Motor 10 Types 5pcs Each Miniature Stepper Motor Assorted with Box

Model: COMINU050178   |    Mpn: DOW   |    Ean: 0702380701682   |    PartNumber: DOW   |   Asin: B00NNM66GO

This is a special offer!! there are 10 kinds of 2 phase 4 wire stepper motors, 5pcs of each! It is 50pcs totally with a plastic box as photo. Pls note that: these motors are very tiny, we do not have other info about it, pls make sure if you can handle it before buying! Application Used for camera or small home digital products Stepper motor diameter: About 6 MM Voltage 3-5V dc Type Two phase four Wire What included: 50pcs micro stepper motors and one plastic box

Features

  • 5pcs each 10 kinds of 2 Phase 4 Wire Stepper Motor, 50pcs totally
  • Rated Voltage : 3-5V dc
  • Dia.: about 6MM
  • Type Two phase four Wire
  • Package: 5pcs for each. 10 Types of Micro motor in one box. 50pcs of stepper motor totally
  • See more on Amazon...

Brand: Dow   |   Manufacturer: DOW

Item Dimensions: 1.3 x 3.6 x 5.8 inches (3.3 x 9.1 x 14.7 cm)   |   Package Dimensions: 1.3 x 3.6 x 5.8 inches (3.3 x 9.1 x 14.7 cm)

Amazon Price: $21.95 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $21.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

 Ean: 0713871351705   |    PartNumber: 2848-2003-2S   |   Asin: B07QPLXXLY

Stepper Motor basic info:
Rated voltage: DC 5V 4-phase
Motor diameter: 1.1 inches
Wire length: 10.79 inchs
Stepping angle: 5.625 x 1/64; Reduction ratio: 1/64

Features:
A, B, C, D four-phase LED indicates the status of the stepper motor work.
Stepper motor with a standard interface, when used directly pluggable.
5 line 4 phase can be used for ordinary.
ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking.

Package includes:
2* 28BYJ-48 Stepper Motor
2* Uln2003 Driver Board

Features

  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • Stepper motor with a standard interface, when used directly pluggable.
  • 5 line 4 phase can be used for ordinary.
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking.
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board
  • See more on Amazon...

Brand: DGZZI   |   Manufacturer: DGZZI

Package Dimensions: 1.18 x 3.54 x 4.72 inches (3.0 x 9.0 x 12.0 cm)

Amazon Price: $8.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Dorhea 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino + 20 PCS Male to Female Jumper Wire Cable

 Ean: 0701715541283   |    PartNumber: 15712-1   |   Asin: B07Q4B5W4X

Feature:
A, B, C, D four-phase LED indicates the status of the stepper motor work.
Stepper motor with a standard interface, when used directly plug gable.
Rated Voltage: DC5V 4-phase
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s- Step angle: 5.625 x 1/64
DC Resistance: 200 7% (25C)
Reduction ratio: 1/64
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.m
Temperature Rise: Package including:
5 X Uln2003 Stepper Motor
5 X Driver Board
20 X female to male cable

Features

  • Stepper motor with a standard interface, when used directly plug gable,very easy and convenient.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking.
  • All the stepper motors compatible with arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Packing include : 5 pcs uln2003 stepper motor + 5 pcs driver board + 20 pcs jumper wire cable.
  • See more on Amazon...

Brand: Dorhea   |   Manufacturer: Dorhea

Package Dimensions: 0.3 x 3 x 5 inches (0.8 x 7.6 x 12.7 cm)

Amazon Price: $10.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

XLX 2PCS 16 Channel 12-bit PWM Servo Motor Driver Board Controller IIC Interface Driver Module PCA9685 Converter for Arduino Robot DIY Servo Shield Module

 Ean: 0700713393047   |    PartNumber: XLX-6210   |   Asin: B07Q8KC6BC

About us:
This is an i2c communication with a built-in PWM driver and a clock. This means that this will be very different
from the TLC5940 series. You don't need to constantly send signals to take up your MCU!

It is 5V compatible, which means you can also control it with a 3.3V microcontroller and drive it safely to
the 6V output (it is also possible to control the white or blue indicator with a 3.4+ positive voltage)

The 6 address select pin allows you to hang 62 drive boards on a single i2c bus for a total of 992 PWM outputs. That would be a very huge resource.

About 1.6Khz adjustable frequency PWM output

Prepare output 12-bit resolution for stepper motors, which means 4us resolution at 60Hz update rate

Configurable push-pull output or open output

Output enable pin enables fast disable of all outputs

Package including:
2pcs x Driver Module

Module performance and features:
- PCA9685 chip is wrapped in the center of the small board

-Power input terminal

-Green power indicator

-It is convenient for you to insert 16 servo motors at a time in 4 sets of 3-pin connectors
(the servo motor plug is slightly wider than 0.1", so you can put 4 pairs of 0.1" connectors)

-Reverse polarity protection input on the terminal block

-Cascade design

-Place a large capacitor on the V+ line (you will need it in some cases).
The maximum input voltage of the peripheral input depends on the capacitance of this 10V1000uf

- A 220 ohm series resistor is placed on all PWM output lines to protect them and easily drive the LEDs

-Overall over temperature protection

-Module size: 62mm * 25mm * 9.5mm (length*width*height)

-Weight: 16g

Features

  • Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use.
  • Package including: 2 pack of driver module, which consist of PCA9685 chip, high-precision power input terminal, high frequency filter capacitor and power indicator. A large area of copper and dense vias enhance heat dissipation. it has current limiting, short circuit and over temperature protection. Even if the output is short circuit, it will not burn out the module and it is safer.
  • Convenient tool: This is an i2c communication with a built-in PWM driver and a clock. This means that this will be very different from the TLC5940 series. You don't need to constantly send signals to take up your MCU!
  • High Power High Efficiency: High reliability, strong vibration resistance, good electromechanical performance. It is 5V compatible, which means you can also control it with a 3.3V microcontroller and drive it safely to the 6V output (it is also possible to control the white or blue indicator with a 3.4+ positive voltage)
  • A wide range of applications: This module can be applied to Arduino Robot, Household Power Systems, raspberry pie and DIY Servo Shield Module etc.
  • See more on Amazon...

Brand: XLX   |   Manufacturer: XLX

Package Dimensions: 1.97 x 1.97 x 3.94 inches (5.0 x 5.0 x 10.0 cm)

Amazon Price: $10.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Sunhokey TB6600 Stepper Motor Driver 32 Segments 4A 9-42V Suitable 42,57,86 Type 2-Phase 4-Phase Stepper Motor (Upgraded Version)

 Ean: 0714453304218   |    PartNumber: TB6600   |   Asin: B07Q98JDGH


The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.

Feature:
PWM chopper type bipolar stepper motor driver IC.
1. 9V-42V DC power supply.
2. H bridge bipolar constant phase flow drive.
3. the maximum 4.0A of the eight kinds of output current.
4. the largest 32 subdivision of the 6 models are optional.Support 8 kinds of current control Support 7 kinds of micro steps adjustable.
5. input signal high speed photoelectric isolation.
6. common-anodestandard single pulse interface.
7. offline to maintain the function.
8. semi closed enclosure can be adapted to a more stringent environment.
9. to provide energy-saving semi-automatic current lock function.
10. built-in temperature protection and over current protection.

IC parameter:
single chip bipolar sine microstep stepper motor driver.
the new BiCD 0.13 nm process.
up to 42V.
resistance (a +) = 0.4.
the forward and reverse rotation control.
5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32).
output current: IOUT = 4.0A (peak, in 100ms).
rated output: IOUT = 3.5 A.
package: HZIP25 - 1.00F.
input port internal pull-down resistor: 100 K.
alarm output pin current:Ialert = 1mA.
monitoring output pin (MO): Imo= 1mA.
with reset and enable pin.
with standby function.
Break through the traditional, single power supply.
built in overheating protection (TSD) circuit.
Undervoltage protection, built-in (UVLO) circuit.
built-in overcurrent detection (ISD), circuit.

Package Included:
1 x Motor Driver
1 x Box

Features

  • 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
  • The maximum 4.0A of the eight kinds of output current. The largest 32 subdivision of the 6 models are optional.
  • Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
  • Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
  • Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
  • See more on Amazon...

Brand: Sunhokey   |   Manufacturer: Sunhokey

Item Dimensions: 1.7 x 5.9 x 7.8 inches (4.3 x 15.0 x 19.8 cm)   |   Package Dimensions: 1.7 x 5.9 x 7.8 inches (4.3 x 15.0 x 19.8 cm)

Amazon Price: $12.49 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

KPfaster, 100W Vibration Motor AC110V 3600RPM Industrial Asynchronous Vibrator

 Ean: 0796862449926   |    PartNumber: 6536   |   Asin: B07SDFRB62

Warranty:
12 months money back and free replacement. If you have any problems, feel free to contact us.
We will respond within 24 hours and try to help you the best!

Specifications:
Name: Vibrator Motor
Rated speed: 3600 RPM
Rated voltage: 110V
Type: 1 phase 100W
Weight: approx. 1600-2500g

Package included:
1 x Vibrator Motor

Features

  • Adjustable eccentricity block: adjust the Angle of eccentricity block, can stepless adjust the excitation force , meet all kinds of requirements; Adopt of imported bearings, low noise, smooth operation, long service life.
  • High temperature resistance pure copper enameled wire, all copper winding, stator vacuum dip paint, guarantee insulation grade; Aluminum alloy shell, light quality, fast heat dissipation, fast temperature rise.
  • The machine shell is precision casting, with o-ring seal on the edge, fully closed structure design, with dustproof and moisture-proof function.
  • Anti vibration special power cable protection cover to prevent long - time cable vibration damage; Apply in Mining, metallurgy, coal, electricity, construction, chemicals, medical equipment, food machinery, etc.
  • Wiring method:1 phase: Green and yellow wire: ground wire, the other two wire: one connect neutral live, one connect live wire (arbitrarily).
  • See more on Amazon...

Brand: KPfaster   |   Manufacturer: KPfaster

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

tatoko 10 Pcs Coin Vibration Motor Micro Mini Flat Vibration Motors Disc Shape Vibrating Motor DC 3V 12000RPM Two Wired 12mm x 3.4mm For Cell Phone, DIY Toys, Watch, Tablet Computer, Electronic Toy

 Ean: 0682559437539   |   Asin: B07PWTCW2H

Widely used in mobile phones, robots, bluetooth, toys, crafts, electronics, mini fans

Features

  • Product Parameters --- Rated Voltage: DC 3V 0.08A; Speed: 12000 2000 (rpm); Body Size: 12 x 3.4mm (D*T).
  • Line length; 5 cm
  • Energy Saving --- Miniature Vibration Motor very small electric consumption, strong vibration.
  • Applicable Scene --- Self adhesive Vibration Micro-motor for cell phone, tablet computer, electronic toy, watch, bracelet, health care products.
  • Package included: 10 x Cell Phone Vibration Motors
  • See more on Amazon...

Brand: tatoko   |   Manufacturer: tatoko

Amazon Price: $11.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Meade Instruments 616000 Instruments Polaris Motor Drive for Polaris Telescopes only (Renewed)

 Ean: 0683332186187   |    PartNumber: 616000-cr   |   Asin: B07R6F8WY1

Features

  • Continuous RA tracking for telescope
  • Requires 9V battery, included
  • Simple attachment to telescope in under five minutes
  • See more on Amazon...

Brand: Meade Instruments   |   Manufacturer: Meade

Item Dimensions: 3.7 x 2.48 x 3.54 inches (9.4 x 6.3 x 9.0 cm)   |   Package Dimensions: 3.7 x 7.7 x 7.8 inches (9.4 x 19.6 x 19.8 cm)

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Laliva Tool - DC 12V CNC Reducing Stepping Stepper Motor 0.6A 10oz.in 24BYJ48 Silver

 Ean: 0696562357623   |    PartNumber: LLV-40297FC0F632B72B99   |   Asin: B07KVXJRH5

4469 Product Name : Stepper Motor. Model No. : 24BYJ48 It is 4 phase. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects.Product Name : Stepper Motor. Model No. : 24BYJ48 It is 4 phase. High Step Accuracy and Resolution. Low Vibration and Noise. Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics. Stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects. Phase : 4 Voltage : DC 12V Motor Max. Dia : 24mm/0.94" Step Angle : 5.625 /64 Rated Current : 0.6A Motor Resistant : greater than equal 10M (DC.500) Holding Torque : 70N.cm/ 10oz.in Detent Torque : 50N.cm/ 7.1oz.in Shaft Length : 8mm/0.31" Motor Dia : 28 mm/1.1" Cable Length : 12cm / 4.7" Mounting Hole Dia : 3mm/0.12" Material : Metal, Plastic, Electronic Parts Color : Silver Tone Weight : 29g Package Contents: 1 x Stepper Motor Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Item specifics: Certification: CE Model number: SZ-NFLC-I009047

Features

Brand: Laliva Tool   |   Manufacturer: Laliva

Amazon Price: $10.09 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $10.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

uxcell ULN2003 Stepper Motor Driver Board AVR ARM Green Black

Model: a14122700ux0041   |    Mpn: a14122700ux0041   |    PartNumber: a14122700ux0041   |   Asin: B00U8VGWQM

Features:Brand new and high quality. Voltage: 5V. Diameter: 28mm. Reduction ratio: 1 / 64. 5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for. supporting the use of a direct and easy to use stepper motor used in the development board. Stepper motor driver board with ULN2003. A, B, C, D four-phase LED indicates the status of the stepper motor work. Most anything that requires motion control will use a step motor. So how do we get a BeagleBone to work a step motor? We need four things: Step Motor - The motor steps (rotates) when the power is applied to the motor windings. Driver - The driver receives a command, interprets it, and send the necessary power to the step motor to achieve a step. Controller- A device (microprocessor) capable of sending a command to the driver. User Interface (UI) - A physical or virtual device that provides a user with effective interaction and control of the step motor. If you need step motor, please check it in our store or contact us as soon as possilble.

Features

  • Country of Manufacture: CHINA; Material: Electronic Parts
  • Net Weight: 7g; Package Content: 1 x ULN2003 Stepper Motor Driver Board
  • Brand: Assisi; Model: ULN2003
  • Main Color: Green, Black
  • Total Size: 35 x 32 x 12mm(L*W*T)
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 1.18 x 3.94 x 5.51 inches (3.0 x 10.0 x 14.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Makerfire 4PCS 1102 10000KV Brushless Motors 2-3S for Happymodel Mobula7 FPV Racing Drones

 Ean: 0673400168115   |    PartNumber: 5S401585I657RB96ZT0   |   Asin: B07NT2XY7B

Makerfire 4PCS 1102 10000KV Brushless Motors 2-3S for 75-85mm Drone Like Mobula7 HD FPV Racing Drones Shaft Diameter: 1.5mm, Rotor Diameter: 14mm,KV (rpm/V): 10000KV, Weight: 3.62g, Compatible with 2S~3S (7.4v to 11.1v) lipo battery, 2030 props. Light weight design, running stably with lower noise, longer flight duration for fpv rc drone. Each motor is carefully balanced and tested before shipped out. Packing:4 * 1102 10000KV Brushless Motor for RC Drone. Specifications: Motor KV: 10000KV Rotor Diameter: 14mm Shaft Diameter: 1.5mm No.of Cells(Lipo): 2-3S Recommended Prop: 2030 props Wire Size: 30AWG/60mm Weight: 3.5g Package Including 4* 1102 10000KV Brushless Motor

Features

  • Shaft Diameter: 1.5mm, Rotor Diameter: 14mm,KV (rpm/V): 10000KV, Weight: 3.62g,
  • Compatible with 2S-3S (7.4v to 11.1v) lipo battery, 2030 props.
  • Light weight design , running stably with lower noise, longer flight duration for fpv rc drone.
  • Each motor is carefully balanced and tested before shipped out.
  • Packing:4 * 1102 10000KV Brushless Motor for RC Drone.
  • See more on Amazon...

Brand: Makerfire   |   Manufacturer: Makerfire

Item Dimensions: 0.39 x 1.18 x 1.18 inches (1.0 x 3.0 x 3.0 cm)   |   Package Dimensions: 0.79 x 2.36 x 3.54 inches (2.0 x 6.0 x 9.0 cm)

Amazon Price: $32.99 | as of 06/15/2019(5:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino
  2. Dorhea 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino + 20 PCS Male to ...
  3. XLX 2PCS 16 Channel 12-bit PWM Servo Motor Driver Board Controller IIC Interface Driver Module PCA96...
  4. Sunhokey TB6600 Stepper Motor Driver 32 Segments 4A 9-42V Suitable 42,57,86 Type 2-Phase 4-Phase Ste...
  5. KPfaster, 100W Vibration Motor AC110V 3600RPM Industrial Asynchronous Vibrator
  6. tatoko 10 Pcs Coin Vibration Motor Micro Mini Flat Vibration Motors Disc Shape Vibrating Motor DC 3V...
  7. Meade Instruments 616000 Instruments Polaris Motor Drive for Polaris Telescopes only (Renewed)
  8. Laliva Tool - DC 12V CNC Reducing Stepping Stepper Motor 0.6A 10oz.in 24BYJ48 Silver
  9. uxcell ULN2003 Stepper Motor Driver Board AVR ARM Green Black
  10. Makerfire 4PCS 1102 10000KV Brushless Motors 2-3S for Happymodel Mobula7 FPV Racing Drones

Most Wished For

  1. STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
  2. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  3. Celestron R/A Single Axis Motor Drive for the AstroMaster Telescope
  4. Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino...
  5. Orion 7832 Dual Axis TrueTrack Telescope Drive
  6. iOptron 3200 SmartEQ Pro (White)
  7. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)
  8. STEPPERONLINE High Torque Low Current Nema 17 Stepper Motor 85oz.in/60Ncm 0.64A Extruder Motor

Most Gifted

  1. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)
  2. 6V dc 4 Wire 2 Phase Mini Stepper Motor Micro Stepper Motor Dia 10mm Linner Stepper Motor
  3. Adafruit Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [ADA807]
  4. Celestron R/A Single Axis Motor Drive for the AstroMaster Telescope
  5. STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
  6. Orion 7827 EQ-2M Electronic Telescope Drive
  7. Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino...
  8. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  9. Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino...
  10. 50pcs 3-5V dc 4 Wire 2 Phase Micro Stepper Motor Mini Stepping Motor 10 Types 5pcs Each Miniature St...

Top Selling

  1. STEPPERONLINE Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC
  2. STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
  3. PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers (Black)
  4. Celestron R/A Single Axis Motor Drive for the AstroMaster Telescope
  5. DC Motor and Stepper FeatherWing Add-on For All Feather Boards
  6. Celestron 93522 Dual Axis Motor Drive (Advanced CG4)
  7. RilexAwhile DC 3V 3500RPM Mini Vibration Motor Arbitrary Direction for Cell Phone 4mm x 8mm( 20 pcs)
  8. Adafruit Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D [ADA807]
  9. Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board for arduino...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Tv & Ent.


Audio


Photo


Video


Video Gaming


Computers


Mobile


Car & Vehicle


Special


Music Equipment



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.