Best desoldering wicks - Buying Guide
Last Updated: 04/26/2024
Share on
Bestselling desoldering wicks on Amazon
- Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Cl...
- TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Solde...
- TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Solde...
- Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker...
- SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-...
- NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
- VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bo...
- No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Li...
- Hakko FR301-03/P Portable Desoldering Tool with Precise Temperature Control F / C
- Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Wid...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Asin: B094GZ6CPZ | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905286 | UPC: 606727905286
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-FT
Dimensions: 0.50 x 5.00 x 4.00 Inches | Weight: 0.50 ounces
See On Amazon #2
TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'
Asin: B09XGY9M5H | Model: SW-2515 | PartNumber: SW-2515
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
See On Amazon #3
TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
Asin: B093ZYF99G
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
Dimensions: 0.39 x 118.11 x 0.08 Inches | Weight: 0.01 pounds
See On Amazon #4
Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B09B9DF96D | Model: XXX00 | PartNumber: XXX00 | Ean: 0632296853406 | UPC: 632296853406
3.Widely Used: No-Clean Solder Braid Is Suitable For Welding Work In Laboratories, Industries, Schools And Homes, It Is Suitable For All Kinds Of Electronics, Electrical Appliances, Precision Instruments And Meters. It Can Absorb Tin Quickly And A Large Amount Of Tin, And Is Dedicated To Remove Excess Solder..
5.Ingenuity Quality: 1 Piece Of No-Clean Solder Braided Wicks (0.078 Inch Wide, 9.84 Ft Length), Which Is Sufficient To Meet Your Work Requirements. If You Have Any Product Questions, You Can Contact Us At Any Time..
4.Easy To Use: Desoldering Braid Is Used To Absorb Excess Solder When Removing Tin, The Fine Woven Design Promotes Strong Capillary Action To Suck In Excess Solder. The Main Board Desoldering Spot Is Removed, And It Is Used With The Soldering Station..
2.Geometric Braid Design: The Desoldering Wick Adopts A Precise Geometric Braid Design, Which Ensures A Large Surface Tension And Tin Absorption Ability, And Reduces The Risk Of Thermal Damage To The Circuit Board..
Features
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
- See more on Amazon...
Brand: Herain | Manufacturer: Herain
Dimensions: 0.40 x 1.85 x 1.85 Inches
See On Amazon #5
SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Asin: B09PZLZSNT | Model: SW-2.5-NC-10-3P | PartNumber: SW-2.5-NC-10-3P | Ean: 0742383847994 | UPC: 742383847994
Easy To Use: Simply Place Desolder Wick Over Work And Apply Heat To Remove Solder From Parts And Terminals, Break Solder Bridges, And Correct Other Soldering Mistakes..
Pcb Safe Residues: Desolder Wick Leaves Little Flux Residue That Is Non-Conductive And Non-Corrosive So It Requires No Cleaning. This Product Is Also Rohs Compliant..
Fast & Effective Wicking: Unique Gap-Weave Coated Solder Wick Braid Absorbs Solder Quickly Like A Sponge, Reducing The Likelihood Of Overheating And Lifted Pads..
High Quality Materials: Impurity-Free Woven Copper Desolder Braid Construction With 3% No-Clean Flux Provides Superior Conductivity, Even At Low Temperatures..
Features
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- See more on Amazon...
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
See On Amazon #6
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
Asin: B0195UVWJ8 | Model: SW02-10 | PartNumber: SW02-10 | Ean: 0768249099987 | UPC: 768249099987
100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 pounds
See On Amazon #7
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 Inches
See On Amazon #8
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
Asin: B098X43NQ6
Quality Material: These No Clean Soldering Wicks Are Made Of Quality Copper Wire And Adopt Precise Weaving Technology, Which Can Enhance Tension On The Surface To Absorb Excess Solder; The Liquid Solder Pen Is Made Of Reliable Materials, No Leaking And Safe For Protecting The Flux, Preventing You From Touching The Organic Solvents.
Wide Applications: These Soldering Pens And Braided Solder Wicks Can Be Applied For Laboratory, Computer, Home Repairs And Correcting Small Pcb Board Errors And Through Hole Solder Joints, Electronics Welding, Etc., Bringing A Lot Of Convenience To Your Work And Improving Efficiency.
Practical Tools: 10-Ml Solder Pen With Soft Brush Tip Can Release The Liquid Flow Moderately, Which Can Clean The Components Without Harming The Pcb Board Copper Foil Or Ic Pin; The Solder Remover Wick Features Good Thermal Conductivity And Absorption, Useful To Reduce The Risk Of Thermal Injury To The Circuit Boards.
Suitable Size: The Rosin Pen Measures About 14.3 Cm/ 5.6 Inches In Length, And The Solder Braided Wick Is About 1.5M/ 59 Inches Long And 2.5Mm/ 0.1 Inches Wide, Which Is Convenient To Hold In Hand; Please Check The Size Carefully Before Purchasing.
Features
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
- See more on Amazon...
Brand: Ferraycle | Manufacturer: Ferraycle
See On Amazon #9
Hakko FR301-03/P Portable Desoldering Tool with Precise Temperature Control F / C
Asin: B07BFVFMS9 | Model: FR301-03/P | PartNumber: FR301-03/P
Fast Release Tool For The Quick-Change Nozzle System.
Non Esd.
Closed-Loop Sensor Integrated Heating System For Improved Thermal Performanc.
Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste.
Features
- Easy-To-Use Adjustable Temperature Control Built Into The Handle
- Easy-To-Clean Solder Recovery Chamber Minimizes Maintenance And Reduces Waste
- Fast Release Tool For The Quick-Change Nozzle System
- Closed-Loop Sensor Integrated Heating System For Improved Thermal Performanc
- Non ESD
- See more on Amazon...
First Available: 03/13/2018
Brand: Hakko | Manufacturer: American Hakko Products, Inc
Weight: 1.10 pounds
Warranty: 90 days from date of purchase
See On Amazon #10
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
Asin: B09BBBY4HP | Model: 366D | PartNumber: 366D | Ean: 0751242241705 | UPC: 751242241705
【One-Handed Solder Sucker With Powerful Suction】: Whether You Are Right Or Left-Handed, You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
【Widely Used Solder Remover】:The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
Abs Body With Non-Slip Sponge And Nylon Nozzle Solder Wick - The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold. Right Or Left Handed Design Allows Easy One-Handed Use..
Desoldering Wick With Copper Braid - Solder Wire, Replacement Tip, 2Pcs Solder Braid (3.5Mm/2.0Mm Width, 1.5M Length). 100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder..
Features
- 6-in-1 Solder Removal Tool : 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
- One-handed solder sucker with powerful suction : Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use.
- Widely used Solder Remover :The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 Inches | Weight: 0.22 pounds
See On Amazon #11
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
Asin: B07CB9V427 | Ean: 0601263548355 | UPC: 601263548355
High Quality Material - The Desoldering Pump Body Made Of Premium Quality Abs Material, With Non-Slip Sponge And Nylon Nozzle, Anti-Static, Heat Resistant And Durable.
7-In-1 Solder Removal Tool - 1Pcs Solder Sucker And 6Pcs Solder Wicks In 3 Size.
Wide Application - Correcting Mistakes On Small Pcb Boards, Removing Relays And Other Components From Printed Circuit Boards, Cleaning Small Components, Re-Soldering And Desoldering.
Desoldering Braid Wick With Rosin - 6 Pieces Copper Solder Braid In 3 Size, Width 2.0Mm/2.5Mm/3.0Mm, Length 1.5M, 2 Pieces For Each Size; Geometrically-Precise Weave, Can Be Used To Clean The Spare Solder On The Pin Away To Avoid Short Circuit, To Meet Your Various Of Soldering Needs.
Features
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
- See more on Amazon...
Brand: AUSTOR | Manufacturer: AUSTOR
Dimensions: 0.79 x 7.48 x 5.12 Inches
See On Amazon #12
BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m)
Asin: B0CB3QGXR8 | Model: US-RX2530 | PartNumber: US-RX2530
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Solder Wick Braid Wide Range Of Use: The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials:The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.20 x 0.20 Inches
See On Amazon #13
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Asin: B0777LMVTT | Model: . | PartNumber: . | Ean: 0766894880417 | UPC: 766894880417
【Premium Desoldering Pump】The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
【Widely Used Solder Remover】The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
【3-In-1 Solder Removal Tool】1Pcs Desoldering Vacuum Pumps And 2Pcs Solder Wicks, A Must-Have Tool For Electronics Kit, The Desoldering Wick Absorbs Solder, The Desoldering Pump Pulls It Away Quick, While The Solder Wick Is Better For Small Amounts Of Solder, The Solder Sucker Takes Up Large Amounts..
【Desoldering Wick With Copper Braid】2Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Features
- Easy to Use Solder Sucker Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- Desoldering Wick with Copper Braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- Premium Desoldering Pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Widely Used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: Tabiger | Manufacturer: TABIGER
Dimensions: 0.70 x 9.00 x 4.00 Inches | Weight: 0.17 pounds
See On Amazon #14
VOTCT Solder Wick Braid No-Clean Desoldering Wick soldering Wire Roll Width 0.1in,Length 10Ft
Asin: B0C5C6XYMH | Model: SWA30 | PartNumber: SWA30
No-Clean Solder Wicks, Wick Size Is 10Ft Long And 0.1 Inch Width, It Can Be Used For Relatively Large Patch Components And Left A Clean Working Area.
To Prevent From Getting Burned, Do Not Touch The Solder Wire Directly During Using,Use Plier Or Other Tool To Pick It Up,If You Encounter Problems During Using, Please Feel Free To Contact Us.
This Braided Solder Wire Are Suitable For Labs, Home And Industry Soldering Work, Practical Tool To Desolder And Correct Errors On Pcb Circuit Boards,Low Residue,Getting Tin Fast,Sucking Tin Fast.
Desoldering Wick Has Good Tin Conductivity And Clean Tin Absorption,Remove The Welding Spot Of The Main Board And Use It With Soldering Station.
Features
- Our solder wick is a wire braided strip that absorbs molten solder by capillary action,it's used to absorb excess solder when removing tin,it's resistant to oxidation and corrosion
- Desoldering wick has good tin conductivity and clean tin absorption,remove the welding spot of the main board and use it with soldering station
- No-clean solder wicks, wick size is 10ft long and 0.1 inch width, it can be used for relatively large patch components and left a clean working area
- This braided solder wire are suitable for labs, home and industry soldering work, practical tool to desolder and correct errors on PCB circuit boards,low residue,getting tin fast,sucking tin fast
- To prevent from getting burned, do not touch the solder wire directly during using,use plier or other tool to pick it up,if you encounter problems during using, please feel free to contact us
- See more on Amazon...
Brand: VOTCT | Manufacturer: VOTCT
See On Amazon #15
NTE Electronics SW04-10 No-Clean Solder Wick with Anti-Static Bobbin, 4 Blue.098" Width, 10' Length, One Size
Asin: B007Z7Y7XM | Model: SW04-10 | PartNumber: SW04-10 | Ean: 0768249100782 | UPC: 768249100782
100 Percent Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
- Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
- 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 Pounds
See On Amazon #16
EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool - Blue
Asin: B01N1EZNVF | Model: i025 | PartNumber: i025 | Ean: 0014286208562 | UPC: 014286208562
Excellent Thermal Transfer For Faster, Safer Desoldering Using Lower Temperature Irons.
Special Design: Right Or Left Handed Design Allows Easy One-Handed Use.
High Quality Solder Sucker & Light Material: Super High Pressure Vacuum With Aluminum Body Frame With Right Size: 7-1/2" Length X 3/4" Diameter.
Pure Oxygen Free Copper Wire With 0.1"W X 5'L, Weight 0.4Oz.
Features
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1W x 5'L, weight 0.4oz
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2 length x 3/4 diameter
- Special Design: Right or Left handed design allows easy one-handed use
- See more on Amazon...
Brand: EVERMARKET | Manufacturer: EVERMARKET
See On Amazon #17
Lesnow solder wick Braid 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid
Asin: B09XV2PSXD | Model: Lesnow-DW3030 | PartNumber: Lesnow-DW3030 | Ean: 0689713671976 | UPC: 689713671976
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.12 Inch In Width, Enough Quantity And Length For Your Daily Needs.
🌟 If For Any Reason You Are Not Satisfied With Lesnow Solder Cores, We Support You With A Full Refund. If You Have Any Questions About The Use Of The Product Or The Product Is Damaged, Please Contact Us And Our Engineers Will Solve The Problem For You As Soon As Possible..
🌟If You Are Using The Solder Wick For The First Time, It Is Recommended To Use A Multi-Point Flux To Assist In Cleaning,At The Same Time, In Order To Prevent Burns, Do Not Directly Touch The Solder Core At Close Range During Use..
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper Wires With Nice Quality, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Features
- The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- This desoldering wick has geometrically-precise weave with copper wires with nice quality, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs
- If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning At the same time, in order to prevent burns, do not directly touch the solder core at close range during use.
- If for any reason you are not satisfied with lesnow solder cores, we support you with a full refund. If you have any questions about the use of the product or the product is damaged, please contact us and our engineers will solve the problem for you as soon as possible.
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-DW
Dimensions: 0.50 x 2.00 x 2.00 Inches
See On Amazon #18
Essmtuin Solder Wick Braid 2x10Ft with Flux for Electronic, 2 Roll Desoldering Wick Braid Remover Solder, No-Clean Soldering Wick Used to Disassemble Electrical Components (WID 0.08in (2.0mm))
Asin: B0CCW8NQ7R | Model: XXX-2530 | PartNumber: XXX-2530
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Used In Conjunction With A Vacuum Desoldering Tool And Soldering Iron, Experienced Technicians Can Effortlessly Remove Solder From Circuit Board Components To Reset, Remove, Or Replace "Through-Hole" Parts.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
Easy To Use: The Desoldering Wick Provides A Simpler Way To Correct Errors On Small Pcb Boards Without Damaging The Board, Cleaning Small Components, And Is Suitable For Re-Soldering And Desoldering Tasks.
Features
- Works Excellent for Desoldering Items
- Easy to Use: The Desoldering Wick Provides a Simpler Way to Correct Errors on Small PCB Boards Without Damaging the Board, Cleaning Small Components, and is Suitable for Re-soldering and Desoldering Tasks
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- Used in Conjunction With a Vacuum Desoldering Tool and Soldering iron, Experienced Technicians Can Effortlessly Remove Solder from Circuit Board Components To Reset, Remove, or Replace Through-Hole Parts
- See more on Amazon...
Brand: Essmetuin | Manufacturer: ZHUOBAO
Dimensions: 1.90 x 1.90 x 0.56 Inches
See On Amazon #19
12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)
Asin: B08V8QC8Y1
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, Home, School And Industry Welding Work; And The Wicks Adopt Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience For Your Daily Work.
Quality Material: The Desoldering Wicks Are Made Of Quality Copper Wires, And The Design Of Precise Weaving Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing The Work Efficiency.
Features
- Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
- Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
- Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
See On Amazon #20
Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)
Asin: B0987HK6R1
Reliable Material: The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
Easy To Use: The Desoldering Wicks Can Provide A Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering.
Wide Applications: The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
No-Clean Design: The Solder Braided Wicks Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, You Do Not Need To Spending Time Removing Them From The Boards.
Features
- What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
See On Amazon #21
5PCS Solder Wick 1.5mm X 1.5m Alloy Copper Desoldering Wick Braid Remover Tool for Lab Home Industrial
Asin: B0D2P4XKXX | Model: Kadimendium8gnxobrysv | PartNumber: Kadimendium8gnxobrysv
[Multi-Scene Use] : Ideal For Labs, Homes, And Industrial Settings, This Desoldering Wick Is A Handy Tool For Various Soldering Jobs, Improving Accuracy And Efficiency In Your Work..
[Clean And Efficient] : The Desoldering Wick Maintains A Clean Workspace By Absorbing Solder Effectively, Leading To Enhanced Precision And Efficiency In Soldering Projects..
[High Performance Design] : The Alloy Copper Wick Swiftly Absorbs Solder When Heated, Ensuring Efficient And Effective Desoldering, Making It A Must-Have For Soldering Tasks..
[Versatile Application] : The Solder Wick Corrects Errors On Small Pcbs, Removes Components, Resolders Switches, Dismantles Computer Parts, And Cleans Alloys On Smd Components With Precision..
Features
- [Ample Supply] : Each package includes 5 pieces of the alloy copper solder wick remover tool, providing a generous 1.5m in length and 1.5mm in width, ensuring an adequate supply for daily use.
- [Versatile Application] : The solder wick corrects errors on small pcbs, removes components, resolders switches, dismantles computer parts, and cleans alloys on smd components with precision.
- [Multi-scene Use] : Ideal for labs, homes, and industrial settings, this desoldering wick is a handy tool for various soldering jobs, improving accuracy and efficiency in your work.
- [High Performance Design] : The alloy copper wick swiftly absorbs solder when heated, ensuring efficient and effective desoldering, making it a must-have for soldering tasks.
- [Clean and Efficient] : The desoldering wick maintains a clean workspace by absorbing solder effectively, leading to enhanced precision and efficiency in soldering projects.
- See more on Amazon...
Brand: Kadimendium | Manufacturer: Kadimendium
See On Amazon #22
Solder Wicks Desoldering Braided Wicks 1.5mm 1.5m Long Solder Remover Tool 10 Pieces Welding Accessories
Asin: B0D2GXZPFJ
Package: 10Pcs Solder Wick Braid, Whose Width 1.5Mm, Total Length 15M.
The Solder Braided Wicks Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive.
Remove More Solder Than Conventional Wick And Also Easy To Correct Mistakes On Small Pcb Boards.
Solder Braid Made From Oxygen Copper Wire Is Anti-Static, Heat Resistant And.
Features
- The braided solder wicks are suitable for labs, home and industry welding work
- Solder Braid made from oxygen copper wire is anti-static, heat resistant and
- Package: 10pcs solder wick braid, whose Width 1.5mm, Total Length 15m
- Remove more solder than conventional wick and also easy to correct mistakes on small PCB boards
- The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive
- See more on Amazon...
Brand: Hperu | Manufacturer: Hperu
Dimensions: 3.94 x 3.94 x 3.94 Inches | Weight: 0.16 pounds
See On Amazon #23
Solder Wick: Good Desoldering Effect, Weaving, Low Residue, For PCB, Computer Motherboard, Mobile Phone Board
Asin: B0D2BMW1B7 | Model: FTVOGUE1qmwkt6e9n | PartNumber: FTVOGUE1qmwkt6e9n
3. Weaving: Ensure Maximum Tension And Tin Absorption Capacity..
5. Application: Ideal For The Desoldering Of Pcb, Computer Motherboard, Mobile Phone Board, Etc..
4. Low Residue: It Greatly Reduces The Rework / Repair Time Of Electronic Products..
2. Good Desoldering Effect: The Desoldering Braid Can Quickly Absorb Solder And Left A Clean Working Area..
Features
- 1. solder wick: No spattering, non-corrosive and insulation resistant.
- 2. Good desoldering effect: The desoldering braid can quickly absorb solder and left a clean working area.
- 3. weaving: Ensure maximum tension and tin absorption capacity.
- 4. Low residue: It greatly reduces the rework / repair time of electronic products.
- 5. Application: Ideal for the desoldering of PCB, computer motherboard, mobile phone board, etc.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #24
BEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Asin: B0CPTTFS5D | Model: US-RX25300 | PartNumber: US-RX25300
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Wide Range Of Use:The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials:The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 1.00 x 2.30 x 2.30 Inches | Weight: 0.20 pounds
See On Amazon #25
5PCS Solder Wick Alloy Copper Desoldering Braid Remover Tool Absorbs Solder with Efficiency for PCBs Mechanical Keyboards
Asin: B0D1ZGL4QD | Model: Hyuduo70whxzind4 | PartNumber: Hyuduo70whxzind4
[Clean Workspace] : Ensures A Clean Workspace For Higher Accuracy And Efficiency In Soldering Projects..
[Alloy Copper Design] : Swiftly Absorbs Solder With High Performance..
[Ample Supply] : 5 Pieces, 1.5M Long And 1.5Mm Wide For Daily Use..
[Versatile Application] : Correct Errors On Small Pcbs, Remove Relays, Resolder Switches, Dismantle Computer Parts, And Clean Smd Components..
Features
- [Suitable for Various Settings] : Ideal for labs, homes, and industrial soldering jobs.
- [Versatile Application] : Correct errors on small pcbs, remove relays, resolder switches, dismantle computer parts, and clean smd components.
- [Clean Workspace] : Ensures a clean workspace for higher accuracy and efficiency in soldering projects.
- [Ample Supply] : 5 Pieces, 1.5m long and 1.5mm wide for daily use.
- [Alloy Copper Design] : Swiftly absorbs solder with high performance.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #26
3. Effective Desoldering Braid Wire Solder Remover for Print Circuit Board - 5Pcs 1.5m
Asin: B0D1YMF7Q1 | Model: Eujgoov3pivkmx98n | PartNumber: Eujgoov3pivkmx98n
[Multiple Widths Available] Choose The Right Solder Wick Size For Your Specific Desoldering Requirements..
[Top Performance] Enjoy Reliable Results With This Premium Desoldering Braid Wire..
[Versatile Usage] Ideal For Desoldering Circuit Boards, Computer Motherboards, Mobile Phone Boards, And More..
[Fast And Convenient] Works Quickly With A Soldering Iron To Remove Unwanted Solder Efficiently..
Features
- [POWERFUL DE-SOLDERING] Effectively and gently removes solder, leaving no trace behind.
- [FAST AND CONVENIENT] Works quickly with a soldering iron to remove unwanted solder efficiently.
- [MULTIPLE WIDTHS AVAILABLE] Choose the right solder wick size for your specific desoldering requirements.
- [VERSATILE USAGE] Ideal for desoldering circuit boards, computer motherboards, mobile phone boards, and more.
- [TOP PERFORMANCE] Enjoy reliable results with this premium desoldering braid wire.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #27
1. Desoldering Wire Solder Wick Remover for Circuit Boards Computer Mobile Phone Board - 5Pcs 1.5m
Asin: B0D1YGYDZK | Model: Jeffergardengi4hrvpq8f | PartNumber: Jeffergardengi4hrvpq8f
[Efficient Solder Removal] When Used With A Soldering Iron, Making The Process Quick And Hassle-..
[High-Performance Desoldering Wick] With Good Solder Absorption, Ensuring Precise And Effective Desoldering..
[Perfect For Various Electronic Boards] Such As Print Circuit Board, Computer Motherboard, And Mobile Phone Board..
[Multiple Width Options] For Different Desoldering Needs, Providing Flexibility And Versatility..
Features
- [HIGH PURITY OXYGEN- COPPER WIRE] ensures excellent desoldering and tin suction, leaving virtually no residue.
- [MULTIPLE WIDTH OPTIONS] for different desoldering needs, providing flexibility and versatility.
- [EFFICIENT SOLDER REMOVAL] when used with a soldering iron, making the process quick and hassle-.
- [PERFECT FOR VARIOUS ELECTRONIC BOARDS] such as print circuit board, computer motherboard, and mobile phone board.
- [HIGH-PERFORMANCE DESOLDERING WICK] with good solder absorption, ensuring precise and effective desoldering.
- See more on Amazon...
Brand: Jeffergarden | Manufacturer: Jeffergarden
See On Amazon #28
5PCS Solder Wick, Desoldering Sucker Wire Desoldering Wick Solder Removal Tool Red Copper Anti Oxidation Desoldering Sucker Wire Set for Welding
Asin: B0D1VQJK5X
Wire Length 4.9Ft: The Total Length Of A Loop Of Tin Suction Wire Reaches 4.9Ft. There Are 5Pcs Tin Suction Coils In The Set, Solder Sucker Soldering Wick Can Meet Your Long Term Use Needs..
Wide Application: Soldering Wire Plays An Important Role In The Desoldering Work Of Printed Circuit Boards, Computer Motherboards, Mobile Phone Boards, Etc. Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
5 Widths: We Provide Various Widths Of Solder Cores, You Can Choose By Yourself To Meet Your Different Desoldering Requirements. Width Approx. 1.5Mm / 0.06In, 2Mm / 0.08In, 2.5Mm / 0.1In, 3Mm / 0.12In, 3.5Mm / 0.14In, Length Approx. 1.5M / 4.9Ft..
Quick Tin Removal: When Solder Braided Wick Used With A Soldering Iron, The Tin Removal Wire Can Quickly Remove Unwanted Solder And Ensure No Short Circuits Between Pins..
Features
- Red Copper Material: The solder wick tin suction wire is made of red copper, which has good anti oxidation, remove relays and other components from printed circuit boards, and has good thermal conductivity, tin removal, and clean tin suction.
- Quick Tin Removal: When solder braided wick used with a soldering iron, the tin removal wire can quickly remove unwanted solder and ensure no short circuits between pins.
- Wire Length 4.9ft: The total length of a loop of tin suction wire reaches 4.9ft. There are 5PCS tin suction coils in the set, solder sucker soldering wick can meet your long term use needs.
- 5 Widths: We provide various widths of solder cores, you can choose by yourself to meet your different desoldering requirements. Width approx. 1.5mm / 0.06in, 2mm / 0.08in, 2.5mm / 0.1in, 3mm / 0.12in, 3.5mm / 0.14in, length approx. 1.5m / 4.9ft.
- Wide Application: Soldering wire plays an important role in the desoldering work of printed circuit boards, computer motherboards, mobile phone boards, etc. Desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.11 pounds
See On Amazon #29
Solder Wick Desoldering Braid Wire, Clean Efficient Desoldering for PCB, Computer Motherboard, Mobile Phone Board
Asin: B0D1PDQXQ9 | Model: Garosas6z80a7nky | PartNumber: Garosas6z80a7nky
[Low Residue] : By Reducing Rework And Repair Time, This Desoldering Wire Is A Time-Saving Solution For Electronic Product Maintenance..
[ Weaving] : With Maximum Tension And Tin Absorption Capacity, This Solder Wick Ensures A Smooth And Effective Desoldering Experience..
[Good Desoldering Effect] : The Braid Can Quickly Absorb Solder, Leaving Behind A Spotless Working Area For Precise Electronic Work..
[ Solder Wick] : This Solder Wick Is Designed To Be Non-Spattering, Non-Corrosive, And Insulation Resistant, Ensuring A Clean And Efficient Desoldering Process..
Features
- [Multi-application] : Ideal for desoldering tasks on various electronics such as pcbs, computer motherboards, and mobile phone boards, making it a versatile tool in electronics repair.
- [ Solder Wick] : This solder wick is designed to be non-spattering, non-corrosive, and insulation resistant, ensuring a clean and efficient desoldering process.
- [Low Residue] : By reducing rework and repair time, this desoldering wire is a time-saving solution for electronic product maintenance.
- [Good Desoldering Effect] : The braid can quickly absorb solder, leaving behind a spotless working area for precise electronic work.
- [ Weaving] : With maximum tension and tin absorption capacity, this solder wick ensures a smooth and effective desoldering experience.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
See On Amazon #30
Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.
Asin: B0019V5MAC | Model: 10-50L | PartNumber: 10-50L | Ean: 7535001398151, 7294104363984, 5915903613552, 5899406100989, 0700736616512 | UPC: 700736616512
Lighter Mass And Pure Copper Braid Construction.
Overheating Minimized By Requiring Less Heat For Shorter Time.
Better Thermal Conductivity, Even At Low Temperatures.
Responds As Much As 50% Faster Than Conventional Desoldering Braids.
Features
- Ultra-thin desoldering wick
- Responds as much as 50% faster than conventional desoldering braids
- Lighter mass and pure copper braid construction
- Better thermal conductivity, even at low temperatures
- Overheating minimized by requiring less heat for shorter time
- See more on Amazon...
Brand: Chemtronics | Manufacturer: CHEMTRONICS
Dimensions: 3.00 x 3.00 x 3.00 Inches | Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search