Best dimensional calibration - Buying Guide
Last Updated: 04/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
WEN 10423 3 x 2 x 1-Inch Steel-Hardened Precision 123 Blocks, Two Pack
Asin: B0000AY61E | Model: 10423 | PartNumber: 10423 | Ean: 0044459104230 | UPC: 044459104230
Features 5 Threaded 3/8-16 Unc Cross-Drilled Holes.
Includes A Set Of Two 1-2-3 Blocks.
Calibrate Equipment, Space Workpieces, Or Collect Exact Measurements.
Each Block Measures 3 By 2 By 1 Inches In Size.
Features
- Perfect for machinists, woodworkers, metalworkers, and more
- Each block measures 3 by 2 by 1 inches in size
- Features 5 threaded 3/8-16 UNC cross-drilled holes
- Calibrate equipment, space workpieces, or collect exact measurements
- Includes a set of two 1-2-3 blocks
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 1.00 Pounds
See On Amazon #2
Taytools Pair Hardened Steel 123 Blocks and Attachment Hardware Kit
Asin: B0C4W1XZWB
Blocks Have 23 Each .340" Through Holes (5 Holes Tapped With 3/8" X 16 Tpi Threads And 18 Holes Are Untapped). Note: These Blocks Cannot Be Bolted Together Without Exposed Hardware. In Order To Attach Multiple Blocks Together With No Exposed Hardware You Will Require The Taytools 123 Block Hardware Attachment Kit. Approximate Weight Per Block: 430 Grams/.95 Pounds..
This Hardware Kit Contains The Following Parts: Two Each 7/8” Long By 5/16” Diameter 8-32 Threaded Dowels, Two Each 7/8” Long By 5/16” Diameter Through Hole Dowels That Fit 8-32 Bolts, Two Each Of The Following Length 8-32 Allen Head Cap Screws 1-1/2”, 2” And 2-1/2”, 9/64” Hex Key And A Small Flat Screwdriver Tip..
Using This Hardware Allows Two Blocks To Be Attached To Each Other In Literally Every Possible Configuration. Comes In Telescoping Plastic Storage Tube. Patent Pending..
123 Block Hardware Attachnent Kit Allows Joining Blocks Together With All Hardware Buried Within The Blocks. The Hardware Is Also Slightly Smaller Than The Holes Allowing Edges And Faces To Be Joined Together With Faces Being Flush With Each Other..
1-2-3 23 Hole Blocks Are Made Of Hardened Tool Steel (Rc 56-60) And Precision Ground On All Six Sides. Overall Size Within +/- 0.0001" (One Ten Thousandth Of An Inch) Flatness And Parallelism Within +/- 0.0001" (One Ten Thousandth Of An Inch) Squareness On All Sides To Within +/- 0.0003" Per Inch (Three Ten Thousandths Of An Inch) Pairs Are Matched To A Tolerance Of 0.0002" (Two Ten Thousandths Of An Inch). Two (2) Pieces Per Set ..
Features
- 123 blocks coupled with our attachment hardware kit have an almost endless array of uses in the shop. They can be used for machine set up, layout and inspection.
- 1-2-3 23 Hole Blocks are made of hardened tool steel (RC 56-60) and precision ground on all six sides. Overall size within +/- 0.0001 (one ten thousandth of an inch) Flatness and parallelism within +/- 0.0001 (one ten thousandth of an inch) Squareness on all sides to within +/- 0.0003 per inch (three ten thousandths of an inch) Pairs are matched to a tolerance of 0.0002 (two ten thousandths of an inch). Two (2) pieces per set .
- Blocks have 23 each .340 through holes (5 holes tapped with 3/8 x 16 TPI threads and 18 holes are untapped). Note: these blocks cannot be bolted together without exposed hardware. In order to attach multiple blocks together with no exposed hardware you will require the Taytools 123 Block Hardware Attachment Kit. Approximate weight per block: 430 grams/.95 pounds.
- 123 Block Hardware Attachnent Kit allows joining blocks together with all hardware buried within the blocks. The hardware is also slightly smaller than the holes allowing edges and faces to be joined together with faces being flush with each other.
- This hardware kit contains the following parts: two each 7/8 long by 5/16 diameter 8-32 threaded dowels, two each 7/8 long by 5/16 diameter through hole dowels that fit 8-32 bolts, two each of the following length 8-32 Allen Head Cap Screws 1-1/2 , 2 and 2-1/2 , 9/64 hex key and a small flat screwdriver tip.
- Using this hardware allows two blocks to be attached to each other in literally every possible configuration. Comes in telescoping plastic storage tube. Patent pending.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 2.00 x 4.00 Inches
See On Amazon #3
kimllier 12Pcs Angle Gauge Block Set, Precision Steel Gauge Block Machinist Tool 1/4 to 30 Degree with Box
Asin: B09XHHGSSY | Model: Does Not Apply | PartNumber: Does Not Apply
Application: For Precise Angular Alignment And Measurement For Grinder And Milling Applications.
Includes: 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, And 30 Degree Hardened Steel Blocks.
Carrying Case: Hard Shell Box Are Easy To Carry.
Features: Hardened Steel Material, Precision Grinding.
Features
- Product: The set features 12 individual steel blocks of various angles, 0.25 inch thickness, accuracy +/-20 seconds, 0.0001 inch per inch
- Features: Hardened steel material, precision grinding
- Application: For precise angular alignment and measurement for grinder and milling applications
- Carrying Case: Hard shell box are easy to carry
- Includes: 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30 degree hardened steel blocks
- See more on Amazon...
Brand: kimllier | Manufacturer: kimllier
Dimensions: 1.57 x 13.78 x 4.72 Inches | Weight: 0.00 Pounds
See On Amazon #4
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets, 6'' Length, Eg10-1400
Asin: B00RZQSGU8 | Model: EG10-1400 | PartNumber: EG10-1400 | Ean: 0641799811097 | UPC: 641799811097
Made From High Quality Alloy Steel.
Secure Storage: Comes In A Molded Plastic Case For Organized, Safe Storage And Transport, Safeguarding The Tools From Damage And Wear..
Robust Material: Made From High-Quality Alloy Steel, Hardened And Ground For Superior Durability And Performance In Demanding Machining Tasks..
Comprehensive Range: Covers Widths From 1/2" To 1-5/8", Ensuring Versatility Across A Wide Spectrum Of Machining Applications And Setups..
Accracy: +/-0.0002" Parallellism.
Ultra-Precise Dimensions: Each Set Includes 10 Matched Pairs With Exceptional Accuracy, Featuring +/-0.0002" Parallelism And +/-0.0001" Height..
Hardened And Ground.
Enhanced Usability: Each Parallel Has 2 Pre-Drilled Holes, Offering Flexibility In Setup And Alignment For Precise Operations..
Our Most Pultra-Precise Dimensions: Each Set Includes 10 Matched Pairs With Exceptional Accuracy, Featuring +/-0.0002" Parallelism And +/-0.0001" Height.Opular Parallel Set, This Set Includes 10 Matched Pairs With Ultra-Accurate Dimensions.
Features
- 1/8" thick matched pairs. 6" length
- Our most pUltra-Precise Dimensions: Each set includes 10 matched pairs with exceptional accuracy, featuring +/-0.0002 parallelism and +/-0.0001 height.opular parallel set, this set includes 10 matched pairs with ultra-accurate dimensions
- Made from high quality alloy steel
- Hardened and ground
- Accracy: +/-0.0002 parallellism
- Ultra-Precise Dimensions: Each set includes 10 matched pairs with exceptional accuracy, featuring +/-0.0002 parallelism and +/-0.0001 height.
- Robust Material: Made from high-quality alloy steel, hardened and ground for superior durability and performance in demanding machining tasks.
- Comprehensive Range: Covers widths from 1/2 to 1-5/8, ensuring versatility across a wide spectrum of machining applications and setups.
- Enhanced Usability: Each parallel has 2 pre-drilled holes, offering flexibility in setup and alignment for precise operations.
- Secure Storage: Comes in a molded plastic case for organized, safe storage and transport, safeguarding the tools from damage and wear.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 9.45 x 2.76 Inches | Weight: 5.07 Pounds
See On Amazon #5
findmall 1 x 2 x 3 Inch Blocks Matched Pair Hardened Steel 23 Holes Accuracy Machinist Milling
Asin: B07XM5BLHJ | Model: findmall | PartNumber: findmall | Ean: 6941110177913
Accuracy With Squareness On All Sides Within .0002" Per Inch.
Cross Drilling Design Gives Minimum Weight And Maximum Strength.
Hardened And Accuracy Ground On All 6 Sides Of Each Block.
23 Holes Consists Of 5 Tapped Holes That Are 3/8-16 For Clamping And 18 Untapped Holes.
Features
- Product Dimensions: 1" x 2" x 3", 2.1 lbs. weight
- 23 holes consists of 5 tapped holes that are 3/8-16 for clamping and 18 untapped holes
- Accuracy with squareness on all sides within .0002 per inch
- Hardened and accuracy Ground on all 6 sides of each block
- Cross drilling design gives minimum weight and maximum strength
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 Pounds
See On Amazon #6
WFLNHB 1 x 2 x 3 Inch Blocks No Holes Matched Pair Hardened Steel Plain (1"x2"x3") 123 Set Accuracy Machinist Milling
Asin: B081CJK163 | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110125341
123 Inch Block Made Of Accuracy-Grade Tool Steel, Hardened And Ground On All 6 Sides Of The Block.
Heat Treated And Case Hardened To Hrc 57-62.
Surface Finish From 6 To 16 Microinches.
Accuracy And Squareness On All Sides Within .0001"-.0002".
Features
- Dimensions- 1" x 2" x 3", 3.5 lbs. weight
- Accuracy and squareness on all sides within .0001-.0002
- 123 inch block made of accuracy-grade tool steel, hardened and ground on all 6 sides of the block
- Surface finish from 6 to 16 microinches
- Heat treated and case hardened to HRC 57-62
- See more on Amazon...
Brand: WFLNHB | Manufacturer: WFLNHB
Weight: 4.00 Pounds
See On Amazon #7
HHIP 4401-1599 12" X 9" X 2" Granite Surface Plate, Grade B, 0 Ledge
Asin: B08BXMX46W | Ean: 0769053107004 | UPC: 769053107004
Granite Plates Are Used For Measuring The Flatness And Squareness Of Other Objects, Laying Out Parts, Calibrating Instruments, Setting Up Tools, Checking Parallelism And Perpendicularity, And Measuring Heights With The Use Of A Height Gage..
Surface Plates Are Offered By Hhip In Various Sizes, With Different Levels Of Flatness And Accuracy And Are Checked By An Auto Collimator For Overall Accuracy Assurance..
They Are Also Used As A Work Surface For Assembling, Inspecting, And Marking Parts. Non-Magnetic And Non-Conductive. Harder Than Steel And Does Not Nick Or Burr..
Granite Surface Plates Meet Or Exceed Federal Specifications Ggg-P-463C And It Includes A Certificate Of Inspection. (Note That These Are Not Nist Traceable.).
Features
- The top surface of this plate is precision ground to achieve a high degree of flatness and the accuracy is +/-0001". It is a Grade B (Grade 1) plate.
- Granite surface plates meet or exceed Federal Specifications GGG-P-463C and it includes a certificate of inspection. (Note that these are not NIST traceable.)
- Granite plates are used for measuring the flatness and squareness of other objects, laying out parts, calibrating instruments, setting up tools, checking parallelism and perpendicularity, and measuring heights with the use of a height gage.
- They are also used as a work surface for assembling, inspecting, and marking parts. Non-magnetic and non-conductive. Harder than steel and does not nick or burr.
- Surface plates are offered by HHIP in various sizes, with different levels of flatness and accuracy and are checked by an auto collimator for overall accuracy assurance.
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 4.00 x 15.00 x 12.00 Inches | Weight: 1.00 Pounds
See On Amazon #8
Accusize Industrial Tools Precision 81-Piece Steel Gauge Block Set, Grade B Accuracy, Corrosion-Resistant, P900-S581
Asin: B00HNU3JDU | Model: P900-S581 | PartNumber: P900-S581 | Ean: 0641799809650 | UPC: 641799809650
All Gage Block Sets Are Assigned Serial Numbers And Accompanied With A Certificate Of Inspection Listing The Deviation For Each Block.
Hardened To Hrc 64 / All Gage Block Sets Are Made To Special Standard To Resist Corrosion And Defacement.
Each Gage Block Set Meets Or Exceeds Federal Specification Asme B89.1.9-2002..
Manufactured Under Carefully Controlled Conditions Allowing For The Highest Degrees Of Accuracy When Used At A Temperature Of 68 Degrees F. (20 C)..
Features
- 81 pc Grade B Steel Gage Block Set with MFG'S certificate
- Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. (20 C).
- All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block
- Each gage block set meets or exceeds federal specification ASME B89.1.9-2002.
- Hardened to HRC 64 / All gage block sets are made to special standard to resist corrosion and defacement
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 8.66 x 13.39 x 2.76 Inches | Weight: 2.80 Kilograms
See On Amazon #9
findmall 1 x 2 x 3 Inch Blocks Matched Pair No Holes Hardened Steel Accuracy Ground Machinist 123 Blocks Set Up Blocks Fit for Accuracy Grinding Layouts
Asin: B07XXP9DKY | Model: findmall | PartNumber: findmall | Ean: 6941110177920
Accuracy And Squareness On All Sides Within .0001"-.0002".
Quantity Deals On 123 Blocks, Parallels, Sets, And Inspection/Set-Up Tooling In The All Industrial Tool Supply.
Dimensions- 1" X 2" X 3", 3.5 Lbs. Weight.
Made Of Precision-Grade Tool Steel Hardened And Ground On All 6 Sides Of Block.
Features
- Heat treated and case hardened to HRC 57-62
- Made of precision-grade tool steel hardened and ground on all 6 sides of block
- Accuracy and squareness on all sides within .0001-.0002
- Dimensions- 1 x 2 x 3, 3.5 lbs. weight
- Quantity deals on 123 blocks, parallels, sets, and inspection/set-up tooling in the All Industrial Tool Supply
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 Pounds
See On Amazon #10
123 Blocks Attachment Hardware Kit
Asin: B09V44FB6M | Ean: 0850026388381 | UPC: 850026388381
This Hardware Kits Contains The Following Parts: Two Each 7/8 Inch Long By 5/16 Inch Diameter 8-32 Threads Dowels, Two Each 7/8 Inch Long By 5/16 Inch Diameter Through Hole Dowels That Fit 8-32 Bolts, Two Each Of The Following Length 8-32 Allen Head Cap Screws 1-1/2 Inch, 2 Inch And 2-1/2 Inch, 9/64 Inch Hex Key And A Small Flat Screwdriver Tip..
Using This Hardware Allows Two Blocks To Be Attached To Each Other In Literally Every Possible Configuration. Comes In Telescoping Plastic Storage Tube. Patent Pending..
Patent Pending.
To Use, Insert A Through Hole Dowel Into A Block Hole And Thread A Screw Through The Hole. Next Insert A Threaded Dowel Into A Hole In Another Block And Screw And Tighten The Screw T Into This Nut To Secure Two Blocks Together. Each Dowel Has A Straight Screwdriver Slot In Line With The Hole To Assist In Getting The Dowels Perfectly Lined Up To Accept The Bolts. The Included Screwdriver Tip Can Be Inserted In The Slot To Help In Getting The Dowels Lined Up To Accept Screws..
This 123 Block Attachment Hardware Kits Addresses The Above Bolting Limitations. This Hardware Allows Joining Blocks Together With All Hardware Buried Within The Blocks. The Hardware Is Also Slightly Smaller Than The Holes Allowing Edges And Faces To Be Joined Together With Faces Being Flush With Each Other..
Features
- Many inexpensive 123 Blocks contain numerous holes allowing them to be bolted together to increase their usefulness. Several problems arise when attempting to join several blocks together: 1) the holes in the sides and faces are not the same distance from the edge and when different faces are bolted together these are steps or offsets, and 2) using readily available bolts and nuts will leave hardware proud of the block s surface interfering with the task at hand.
- This 123 Block Attachment Hardware Kits addresses the above bolting limitations. This hardware allows joining blocks together with all hardware buried within the blocks. The hardware is also slightly smaller than the holes allowing edges and faces to be joined together with faces being flush with each other.
- This hardware kits contains the following parts: two each 7/8 inch long by 5/16 inch diameter 8-32 threads dowels, two each 7/8 inch long by 5/16 inch diameter through hole dowels that fit 8-32 bolts, two each of the following length 8-32 Allen Head Cap Screws 1-1/2 inch, 2 inch and 2-1/2 inch, 9/64 inch hex key and a small flat screwdriver tip.
- To use, insert a through hole dowel into a block hole and thread a screw through the hole. Next insert a threaded dowel into a hole in another block and screw and tighten the screw t into this nut to secure two blocks together. Each dowel has a straight screwdriver slot in line with the hole to assist in getting the dowels perfectly lined up to accept the bolts. The included screwdriver tip can be inserted in the slot to help in getting the dowels lined up to accept screws.
- Using this hardware allows two blocks to be attached to each other in literally every possible configuration. Comes in telescoping plastic storage tube. Patent pending.
- Patent Pending
- See more on Amazon...
Brand: 1-2-3 Blocks | Manufacturer: Taylor Toolworks
Dimensions: 4.00 x 1.00 x 1.00 Inches
See On Amazon #11
Yunnergo Pair of Ultra-Precision 1 x 2 x 3-Inch Parallel Blocks Set 23 Holes 0.0001 Precision with Case&Screws
Asin: B0CBWH5DH4
Product Includes:A Pair Of Ultra-Precision 23-Hole Parallel Block Set, 5 Hexagonal Screws And A Hexagonal Wrench With Plastic Case..
Note: If You Have Any Questions, Please Feel Free To Contact Us..
Application:Great For Machinists, Woodworkers, Metalworkers And More..
Accuracy: 0.0001 Precision For 23 Holes..
Features
- Material: Made of high quality steel, hard and durable, not easy to wear and tear, long time to use.
- Accuracy: 0.0001 precision for 23 holes.
- Product includes:A pair of ultra-precision 23-hole parallel block set, 5 hexagonal screws and a hexagonal wrench with plastic case.
- Application:Great for machinists, woodworkers, metalworkers and more.
- Note: If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: Yunnergo | Manufacturer: Yunnergo
See On Amazon #12
Mitutoyo - 611201-541 Steel Rectangular Gage Block, ASME Grade AS-1, 1.0" Length
Asin: B003U9W8BM | Model: 611201-541 | PartNumber: 611201-541 | Ean: 4946368447193
Rectangular Base For Accurate Wringing.
Identification Number Etched In Block For Traceability.
Nominal Length (In Inches) Indicated With Laser-Etched, Black Characters.
High-Carbon, High-Chrome Steel Provides High Hardness And Wear-Resistance.
Features
- Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
- High-carbon, high-chrome steel provides high hardness and wear-resistance
- Rectangular base for accurate wringing
- Nominal length (in inches) indicated with laser-etched, black characters
- Identification number etched in block for traceability
- See more on Amazon...
Brand: Mitutoyo | Manufacturer: Mitutoyo
Dimensions: 3.10 x 2.10 x 0.80 Inches
See On Amazon #13
Accusize Industrial Tools 10 Pcs Precision Angle Block Set, 3602-0111
Asin: B00HZT7HNC | Model: EG02-0111 | PartNumber: EG02-0111 | Ean: 0663566009858, 0641799807724 | UPC: 641799807724, 663566009858
Lightly Magnetized For Better Holding. Size 3'' Long X 1/4'' Thick.
In A Plastic Box Or In A Wooden Box.
Ten-Block-Set, Complete With A Fitted Case.
For Angle Set-Ups In Tooling, Productions, And Inspection. Hardened And Precision Ground.
Features
- Accuracy: 0.0001'' per inch. Furnished in 1 increments to 5, and in 5 increments to 30
- For angle set-ups in tooling, productions, and inspection. Hardened and precision ground
- Lightly magnetized for better holding. Size 3'' long x 1/4'' thick
- Ten-block-set, complete with a fitted case
- in a plastic box or in a wooden box
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.99 x 1.18 x 8.27 Inches | Weight: 1.87 pounds
See On Amazon #14
WEN 10481 81-Piece Steel Gauge Block Set with Case
Asin: B07HFSS92B | Model: 10481 | PartNumber: 10481 | Ean: 0044459104810 | UPC: 044459104810
Includes Unique Certificate Of Inspection Following Asme B89.1.9 Standards.
Hard-Shelled Carrying Case Keeps The Blocks Organized And Protected From Contaminants.
Calibrate Measuring Equipment With A Tolerance Of +0.25 Μm To −0.15 Μm.
Sizes Range From .05 Inches All The Way Up To 4 Inches.
Features
- Workshop-grade set features 81 individual steel blocks of various sizes
- Sizes range from .05 inches all the way up to 4 inches
- Includes unique certificate of inspection following ASME B89.1.9 standards
- Calibrate measuring equipment with a tolerance of +0.25 m to 0.15 m
- Hard-shelled carrying case keeps the blocks organized and protected from contaminants
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 1.75 x 10.75 x 6.88 Inches | Weight: 5.10 Pounds
See On Amazon #15
QUAAD 1-2-3 Blocks Matched Pair Hardened Steel 23 Holes Precision Machinist Milling Fitted in a Wooden Case
Asin: B09ZKHDLMD
Accuracy And Squareness On All Sides Within .0002".
Cross Drilling Design Allows For Efficient Use Of Lower Weight With Maximum Strength.
23 Holes Includes (5) 3/8-16 Threaded Holes For Clamping And (18) Untapped Holes.
Made Of Precision-Grade Tool Steel Hardened And Ground On All 6 Sides Of Block.
Features
- Heat treated and case hardened to HRC 57-62
- Made of precision-grade tool steel hardened and ground on all 6 sides of block
- Accuracy and squareness on all sides within .0002
- 23 holes includes (5) 3/8-16 threaded holes for clamping and (18) untapped holes
- Cross drilling design allows for efficient use of lower weight with maximum strength
- See more on Amazon...
Brand: QUAAD | Manufacturer: QUAAD
See On Amazon #16
ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8in x 6in Straightedge Bar Blocks 1/2in to 1-5/8in Block Pairs
Asin: B079VVKFGB | Model: ABN-6365 | PartNumber: ABN-6365 | Ean: 0811498031687 | UPC: 811498031687
Built To Last: Constructed From Solid Steel That Is Stress Relieved Against Distortion As Well As Precision Ground And Hardened For Ultimate Strength And Longevity; Bars Come Individually Wrapped (In Pairs) And Are Pre-Oiled For A Long-Lasting Life And Rust-Resistance (We Recommend Reapplying Oil After Use).
Package Contents: Package Contains (20) Parallel Bars – 2 Of Each Size And (1) Storage Case For Your Convenience.
Easy Storage: Heavy-Duty 8.5” X 7.1” X 2.4” Inch (21.6Cm X 18Cm X 6.1Cm) Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization.
Various Sizes: This Package Includes 10 Pairs Of 1/8-Inch X 6-Inch (0.3Cm X 15.2Cm) Parallel Bars With The Following Heights: 1/2-Inch, 5/8-Inch, 3/4-Inch, 7/8-Inch, 1-Inch, 1-1/8-Inch, 1-1/4-Inch, 1-3/8-Inch, 1-1/2-Inch, And 1-5/8-Inch; Permanently Laser-Etched Size In Standard Sae (Inches) On Each Parallel; The 2 Holes On Each Individual Bar Are 4 Inches (10.2Cm) Apart From Center To Center With The Diameter Incrementing In 1/8-Inch From 1/2-Inch To 1-5/8-Inch.
Features
- PRECISE MACHINING: Use the ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8 x 6 Inch Straightedge Bar Blocks 1/2" to 1-5/8 Block Pairs for any machining, especially smaller workpieces; Use on a jig or drill press for milling work and other projects
- VARIOUS SIZES: This package includes 10 pairs of 1/8-inch x 6-inch (0.3cm x 15.2cm) parallel bars with the following heights: 1/2-inch, 5/8-inch, 3/4-inch, 7/8-inch, 1-inch, 1-1/8-inch, 1-1/4-inch, 1-3/8-inch, 1-1/2-inch, and 1-5/8-inch; Permanently laser-etched size in standard SAE (inches) on each parallel; The 2 holes on each individual bar are 4 inches (10.2cm) apart from center to center with the diameter incrementing in 1/8-inch from 1/2-inch to 1-5/8-inch
- BUILT TO LAST: Constructed from solid steel that is stress relieved against distortion as well as precision ground and hardened for ultimate strength and longevity; Bars come individually wrapped (in pairs) and are pre-oiled for a long-lasting life and rust-resistance (we recommend reapplying oil after use)
- EASY STORAGE: Heavy-duty 8.5 x 7.1 x 2.4 inch (21.6cm x 18cm x 6.1cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package contains (20) parallel bars 2 of each size and (1) storage case for your convenience
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.50 x 8.75 x 7.25 Inches | Weight: 5.05 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #17
Accusize Industrial Tools 17 Pc Precision Angle Block Set, Ej99-2117
Asin: B01E66CDZS | Model: EJ99-2117 | PartNumber: EJ99-2117 | Ean: 0641799808202 | UPC: 641799808202
Complete In Custom Wooden Case.
Use For Grinding And Milling Machine Operations.
Set Includes The Following Angles:1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 35, 40, And 45, Plus 2 Riser Blocks.
Accuracy Is Within 0.0001’’/Inch; Length X Thickness: 3.0 X 0.26 Inch.
Features
- Made from Hardened Steel HRc 45-50;
- Accuracy is within 0.0001 /inch; Length x Thickness: 3.0 x 0.26 inch
- Complete in custom wooden case
- Set includes the following angles:1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 35, 40, and 45, plus 2 Riser Blocks
- Use for grinding and milling machine operations
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 8.66 x 13.39 x 2.76 Inches
See On Amazon #18
Taytools 469744 1-2-3 Blocks No Holes Matched Pair (2 Each), Hardened Steel RC 55-62, (1"x2"x3") 123 Precision Ground Machinist Set Up Blocks
Asin: B081D9CYPJ | Model: 469744 | PartNumber: 469744 | Ean: 0700667469744 | UPC: 700667469744
They Contain No Holes..
There Are 2 Pieces Per Set..
Overall Sizes Are Within +/- 0.0002 Inch Flatness And Parallelism Are Within 0.0002Inch. Squareness On All Sides To Within 0.0002 Inch. Pairs Are Matched To A Tolerance Of 0.0002 Inch..
They Are Precision Ground And Case Hardened To Rc 55-62 On All Six Sides..
Features
- This is a matched set (2 each) of professional quality 1-2-3 blocks
- They are precision ground and case hardened to RC 55-62 on all six sides.
- They contain no holes.
- Overall sizes are within +/- 0.0002 inch Flatness and parallelism are within 0.0002inch. Squareness on all sides to within 0.0002 inch. Pairs are matched to a tolerance of 0.0002 inch.
- There are 2 pieces per set.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
See On Amazon #19
Accusize Industrial Tools Ultra Precision 1-2-3 Blocks Set with Screw in Plastic Box, Eg02-0408
Asin: B07KB8SRCX | Model: EG02-0408 | PartNumber: EG02-0408 | Ean: 0637665773231, 0663566019284 | UPC: 663566019284, 637665773231
Finished From 6-16 Micro Inches. Nominal Tapping: 0.0001" To 0.0003". Surface Finish.
Comprehensive Set: Includes 5 Socket Head Cap Screws And A Hex Key, All Neatly Packed In A Durable, Fitted Plastic Case..
High-Quality Material: Hardened To Hrc 56-60 For Optimal Durability And Longevity, Ensuring Consistent Performance..
Superior Finish: Meticulously Finished Between 6-16 Micro Inches For A Smooth Surface, Enhancing Measurement Accuracy..
Set Includes: 5 Socket Head Cap Screws; 1 Hex Key. Packed In A Fitted Strong Case.
Precision Engineering: Offers 0.0001" Squareness And +/- 0.0001" Parallelism For Ultra-Precise Measurements..
5 Holes Tapped To 3/8-16 And Others Untapped. Precision Ground On All Sides. Squareness On All Sides.
Versatile Design: Features 5 Tapped Holes (3/8-16) And Remaining Untapped, Providing Flexibility For Various Applications..
Height Accuracy In Pair: +/- 0.0001". Hardness: Hrc 56-60. Oversize To Allow Nominal Tapping.
Features
- With 23 Holes. Squareness: 0.0001". Parallelism: +/- 0.0001"
- Height Accuracy in Pair: +/- 0.0001. Hardness: HRC 56-60. Oversize to allow nominal tapping
- Finished from 6-16 micro inches. Nominal Tapping: 0.0001 to 0.0003. Surface finish
- 5 holes tapped to 3/8-16 and others untapped. Precision ground on all sides. Squareness on all sides
- Set includes: 5 socket head cap screws; 1 hex key. Packed in a fitted strong case
- Precision Engineering: Offers 0.0001 squareness and +/- 0.0001 parallelism for ultra-precise measurements.
- High-Quality Material: Hardened to HRC 56-60 for optimal durability and longevity, ensuring consistent performance.
- Superior Finish: Meticulously finished between 6-16 micro inches for a smooth surface, enhancing measurement accuracy.
- Versatile Design: Features 5 tapped holes (3/8-16) and remaining untapped, providing flexibility for various applications.
- Comprehensive Set: Includes 5 socket head cap screws and a hex key, all neatly packed in a durable, fitted plastic case.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 9.45 x 2.76 x 9.84 Inches
See On Amazon #20
AM ARROWMAX CNC-Aluminum V-Block - Precision Drilling Accessory (Single Item)
Asin: B0CDLG5386 | Model: AM-230683 | PartNumber: AM-230683 | Ean: 4895175928275
Sturdy Design: The V-Block's Robust Construction Keeps Your Workpiece Firmly In Place, Preventing Slipping Or Moving And Resulting In Clean, Precise Holes Every Time..
Elevate Your Drilling Game: The Arrowmax Cnc-Aluminum V-Block Is The Perfect Tool To Enhance Your Drilling Capabilities And Take Your Projects To The Next Level..
Versatile And Easy To Use: Suitable For Both Professional Machinists And Diy Enthusiasts, The V-Block Is Versatile And User-Friendly..
Magnetic Hold: Equipped With Magnets For Better Hold And Position On The Sds Hedgehog Benchtop Press, Providing Added Stability During Drilling Tasks..
Features
- Precision and Stability: Crafted from high-quality CNC-Aluminum, the V-Block securely holds cylindrical parts while drilling, ensuring maximum precision and accuracy.
- Magnetic Hold: Equipped with magnets for better hold and position on the SDS Hedgehog Benchtop Press, providing added stability during drilling tasks.
- Sturdy Design: The V-Block's robust construction keeps your workpiece firmly in place, preventing slipping or moving and resulting in clean, precise holes every time.
- Versatile and Easy to Use: Suitable for both professional machinists and DIY enthusiasts, the V-Block is versatile and user-friendly.
- Elevate Your Drilling Game: The ARROWMAX CNC-Aluminum V-Block is the perfect tool to enhance your drilling capabilities and take your projects to the next level.
- See more on Amazon...
Brand: ARROWMAX | Manufacturer: Freemax Technology Company Limited (IMPORT)
Dimensions: 1.26 x 4.80 x 1.77 Inches
See On Amazon #21
Starrett Aluminum Meter Stick Metric/English - 39.37" Blade Length, 1-1/8" Blade Width, 0.075" Thickness 1mm, 1/8" Graduations - MS-2
Asin: B004RI53JE | Model: MS-2 | PartNumber: MS-2 | Ean: 0049659361070 | UPC: 049659361070
Lightweight And Durable - Made From Anodized Aluminum, Offering Lasting Durability And Resistant To Corrosion. It Resists Bending And Easy To Carry In Schools Or Shops..
A Brand You Can Rely - Starrett Tools Have Been The Go-To Choice For Precision Measurements For Over 100 Years. With A Legacy Of Quality And Innovation, These Tools Are Essential For Any Workshop..
Versatile - The Rule Is 1M Long And .075" (1.9Mm) Thick With Graduations On Either Edge. Use It Horizontally Or Vertically On A Variety Of Materials Including Wood, Metal And Plastics..
Easy To Use - Starrett Rule Lies Flat Featuring Large And Easy To Read Graduations And Numbers For High Precision Measurement. It Is The Ideal Tool For Measuring, Layout, Marking Or Scribing..
Features
- Ergonomic - The Rule is designed to meet the general-utility measuring needs of schools and shops, wood-workers, tinsmiths, metal workers and bench applications. The slim design allows you to get into tight spaces.
- Easy to Use - Starrett Rule lies flat featuring large and easy to read graduations and numbers for high precision measurement. It is the ideal tool for measuring, layout, marking or scribing.
- Lightweight and Durable - Made from anodized aluminum, offering lasting durability and resistant to corrosion. It resists bending and easy to carry in schools or shops.
- Versatile - The rule is 1m long and .075 (1.9mm) thick with graduations on either edge. Use it horizontally or vertically on a variety of materials including wood, metal and plastics.
- A Brand You Can Rely - Starrett tools have been the go-to choice for precision measurements for over 100 years. With a legacy of quality and innovation, these tools are essential for any workshop.
- See more on Amazon...
Brand: Starrett | Manufacturer: Starrett
Weight: 0.35 pounds
See On Amazon #22
HFS(R) Steel Parallel Set .0002" Hardened (6 pcs 3/8" - 2-1/4")
Asin: B016PFPQJS | Model: 15830 | PartNumber: 15830 | Ean: 0789398115830 | UPC: 789398115830
Each Parallel Is 1/32" Thick X 6" Long Without Any Holes On The Body Product Includes.
Complete With Durable Plastic Case.
Exclusive 20 Pair Ultra Thin Parallel Set.
Features
- Made from high quality tool steel- stress relieved against distortion, precision ground and hardened
- Exclusive 20 pair ultra thin parallel set
- Each parallel is 1/32 thick x 6 long without any holes on the body Product includes
- Complete with durable plastic case
- See more on Amazon...
Brand: HFS | Manufacturer: HFS
See On Amazon #23
ZOENHOU 10 Pairs 1/8 x 6 Inch Machinist Parallel Bars Tools Set, 10 Pair Steel Parallels Straightedge Bar Block with 2 Holes, Hardened Precision Machinist Tools 1/2 Inch to 1-5/8 Inch
Asin: B08Q8P722T | Model: ZOENHOU | PartNumber: ZOENHOU | Ean: 0787823069673 | UPC: 787823069673
Product Packing - A Pair Of Each Height, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, And 1-5/8. Machinist Parallel Bars Come Individually Wrapped (In Pairs) And Are Pre-Oiled For Long-Lasting Life And Rust-Resistance (Recommend Reapplying Oil After Use)..
Worry-Free Shopping - Please Do Not Hesitate To Contact Us If Any Issues With Our 1/8 Inch Thick X 6 Inch Machinist Square Parallel Bars, You Can Get 30 Days Of Worry-Free Refund, 7 Days Of 24-Hour Service After Receiving It. Just Remember That Your Satisfaction Is Our First Priority..
Wide Application - The 20 Pieces Machinist Parallels Tools Are Used For Any Machining, Leveling, And Adjustment Of Milling And Grinding Machines, Forming Machines, Planers, Rigs..
Parallels Strightedge Bar Block - The Size And Parallelism Of The Product Provide The Actual, Reliable, And Accurate Position Of The Workpiece. 2 Holes In Each Parallel Bar. Increments In 1/8 Inch From 1/2 Inch To 1-5/8 Inch..
Features
- PREMIUM MATERIAL - These machinist parallels are made of high-quality steel after hardening, stress relief, and fine grinding.
- PARALLELS STRIGHTEDGE BAR BLOCK - The size and parallelism of the product provide the actual, reliable, and accurate position of the workpiece. 2 holes in each parallel bar. Increments in 1/8 inch from 1/2 inch to 1-5/8 inch.
- PRODUCT PACKING - A pair of each height, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, and 1-5/8. Machinist parallel bars come individually wrapped (in pairs) and are pre-oiled for long-lasting life and rust-resistance (recommend reapplying oil after use).
- WIDE APPLICATION - The 20 pieces machinist parallels tools are used for any machining, leveling, and adjustment of milling and grinding machines, forming machines, planers, rigs.
- WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our 1/8 inch thick x 6 Inch machinist square parallel bars, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority.
- See more on Amazon...
Brand: ZOENHOU | Manufacturer: ZOENHOU
Weight: 1.00 Pounds
See On Amazon #24
OVERTOYOU FEYLIE Bit Limit Ring 3/4/5/6/8/10/12/16mm Twist Drill Locating Ring Wood Drilling Depth Locator Device
Asin: B0D2NFFNRC | Ean: 7620560075268
●【Size】8 Different Sizes Depth Stop Collars Ring Positioners, 3, 4, 5, 6, 8, 10, 12, 16Mm Diameter With One Hex Wrench..
●【Use For】Bit Limit Rings Are Used As A Shaft Collar On Machinery And Can Also Be Used On Any Type Of Bit That Needs Precision Drilling, Keeping Every Hole Extremely Precise..
●【Function】With The Screw Set Tightly, The Collar Will Remain Securely In Place Which Can Accurately Control The Depth Of The Hole You Are Drilling. It Is For Ideal For Repeated Drilling..
●【User-Friendly】Meeting Professional Requirements, The Surface Of It Is Smooth And Clean. It Can Be Used At Will And Easily To Improve Work Efficiency..
Features
- Durable Material Made of high-speed steel material and adopted screw type design, it is durable in use and will not damage bits.
- User-friendly Meeting professional requirements, the surface of it is smooth and clean. It can be used at will and easily to improve work efficiency.
- Size 8 different sizes Depth Stop Collars Ring Positioners, 3, 4, 5, 6, 8, 10, 12, 16mm Diameter with one hex wrench.
- Function With the screw set tightly, the collar will remain securely in place which can accurately control the depth of the hole you are drilling. It is for ideal for repeated drilling.
- Use For Bit limit rings are used as a shaft collar on machinery and can also be used on any type of bit that needs precision drilling, keeping every hole extremely precise.
- See more on Amazon...
Brand: OVERTOYOU | Manufacturer: OVERTOYOU
See On Amazon #25
Mitutoyo - 611191-541 Steel Rectangular Gage Block, ASME Grade AS-1, 0.1" Length
Asin: B003U9W7WC | Model: 611191-541 | PartNumber: 611191-541 | Ean: 4946368446745
Rectangular Base For Accurate Wringing.
Identification Number Etched In Block For Traceability.
Nominal Length (In Inches) Indicated With Laser-Etched, Black Characters.
High-Carbon, High-Chrome Steel Provides High Hardness And Wear-Resistance.
Features
- Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
- High-carbon, high-chrome steel provides high hardness and wear-resistance
- Rectangular base for accurate wringing
- Nominal length (in inches) indicated with laser-etched, black characters
- Identification number etched in block for traceability
- See more on Amazon...
Brand: Mitutoyo | Manufacturer: Mitutoyo
See On Amazon #26
Accusize Industrial Tools 81 Pc Grade AS-2 Steel Gage Block Set, P900-S583
Asin: B00ZXWEE7A | Model: P900-S583 | PartNumber: P900-S583 | Ean: 0641799809674 | UPC: 641799809674
All Gauge Block Sets Are Made To Special Standards To Resist Corrosion And Defacement.
Each Gage Block Set Meets Or Exceeds Federal Specification Asme B89.1.9-2002..
The Coefficient Of Thermal Expansion Is 6.4 X 10.
All Gauge Block Sets Are Assigned Serial Numbers And Are Accompanied With A Certificate Of Inspection Listing The Deviation For Each Block.
Features
- Manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at a temperature of 68 degrees F ( 20 degree C)
- All gauge block sets are assigned serial numbers and are accompanied with a certificate of inspection listing the deviation for each block
- All gauge block sets are made to special standards to resist corrosion and defacement
- The coefficient of thermal expansion is 6.4 X 10
- Each gage block set meets or exceeds federal specification ASME B89.1.9-2002.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 2.76 x 8.66 x 13.39 Inches | Weight: 2.80 Kilograms
See On Amazon #27
WEN 10412 12-Piece Steel Angle Gauge Block Set with Case
Asin: B07MLT9CCZ | Model: 10412 | PartNumber: 10412 | Ean: 0044459104124 | UPC: 044459104124
Includes 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, And 30-Degree Hardened-Steel Blocks.
Hard-Shelled Carrying Case Keeps The Blocks Organized And Protected From Contaminants.
Perfect For Setting Milling Angles Or Calibrating Measuring Equipment.
Workshop-Grade Set Features 12 Individual Steel Blocks Of Various Angles.
Features
- Perfect for machinists and metalworkers; measure angles with maximum precision
- Workshop-grade set features 12 individual steel blocks of various angles
- Includes 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks
- Perfect for setting milling angles or calibrating measuring equipment
- Hard-shelled carrying case keeps the blocks organized and protected from contaminants
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 1.13 x 13.38 x 4.63 Inches | Weight: 1.90 Pounds
See On Amazon #28
HHIP 3600-0042 Machinists' Bench Block (Holes 1/8~5/8 Inch)
Asin: B00N4115UG | Model: 3600-0042 | PartNumber: 3600-0042 | Ean: 0769053013534 | UPC: 769053013534
The Knurled Side Provides A Good Gripping Surface..
Holes From 1/8 To 5/8" Diameter..
V-Groove Across The Face Accommodates Round And Odd Shaped Stock..
A Handy Tool For Holding Work When Driving Pins, Drilling, Etc..
Features
- Made from hardened and ground steel. Block has a 3" diameter and is 1 1/2" tall.
- A handy tool for holding work when driving pins, drilling, etc.
- The knurled side provides a good gripping surface.
- V-groove across the face accommodates round and odd shaped stock.
- Holes from 1/8 to 5/8 diameter.
- See more on Amazon...
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 1.50 x 4.00 x 1.50 Inches
See On Amazon #29
Mitutoyo 611674-531 Steel Rectangular Gage Block, ASME Grade 0, 40 mm Length
Asin: B003U9WGCS | Model: 611674-531 | PartNumber: 611674-531 | Ean: 4946368457536
Rectangular Base For Accurate Wringing.
Identification Number Etched In Block For Traceability.
Nominal Length In Metric [Millimeter (Mm)] Units Indicated With Laser-Etched, Black Characters.
High-Carbon, High-Chrome Steel Provides High Hardness And Wear Resistance.
Features
- Grade 0 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
- High-carbon, high-chrome steel provides high hardness and wear resistance
- Rectangular base for accurate wringing
- Nominal length in metric [millimeter (mm)] units indicated with laser-etched, black characters
- Identification number etched in block for traceability
- See more on Amazon...
Brand: Mitutoyo | Manufacturer: Mitutoyo
Amazon Price: $50.75 | as of 04/26/2024
(11:54am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #30
Anytime Tools 1-2-3 Blocks Matched Pair Ultra Precision Hardened Steel 23 Holes (1"x2"x3") 123 Set w/Bolts and Case Machinist Milling
Asin: B08FBP7YYD | Model: AT202664 | PartNumber: AT202664
Squareness On All Sides Within 0.0001"; Surface Finish From 6 To 16 Microinches;.
Includes: 5X 3/8" Bolts, Allen Wrench, Protective Case.
23 Through Holes (5 Tapped 3/8"-16 Tpi And 18 Plain).
Precision Ground Steel And Case Hardened On All Six Sides.
Features
- MATCHED PAIR, Professional Quality Tool
- Precision ground Steel and Case Hardened on all six sides
- Squareness on all sides within 0.0001; Surface finish from 6 to 16 microinches;
- 23 through holes (5 tapped 3/8-16 TPI and 18 plain)
- Includes: 5x 3/8 Bolts, Allen Wrench, Protective case
- See more on Amazon...
Brand: Anytime Tools | Manufacturer: Anytime Tools
Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search