Best Hardware - Buying Guide
Last Updated: 12/06/2019
Share on
#1
National Hardware N259-911 V2522 Glazing Points in Zinc plated, 50 pack
Model: N259-911 | Mpn: N259-911 | Ean: 0038613259911 | PartNumber: N259-911 | Asin: B0002YTC9O
50 pack. Used to secure glass in wooden frames. Can be installed with a putty knife. Great for the home and office. Steel material.
Features
- 50 pack
- Used to secure glass in wooden frames
- Can be installed with a putty knife
- Great for the home and office
- Steel material
- See more on Amazon...
Brand: National Hardware | Manufacturer: National Hardware
Item Dimensions: 4.12 x 8.25 x 9.25 inches (10.5 x 21.0 x 23.5 cm) | Package Dimensions: 0.8 x 1.5 x 3.7 inches (2.0 x 3.8 x 9.4 cm)
Amazon Price: $4.99 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $4.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #2
CAMO Pro-X1 Guide
Model: 345002 | Mpn: C345002 | Ean: 9780205062041 | PartNumber: C345002 | Asin: 0205062040
The CAMO Edge Deck Fastening System is a fast, easy, and affordable way to install a fastener-free deck surface. Patented CAMO Edge Deck Screws have a rake tip that augers material out as you drive. The Pro-X1 Guide allows you to quickly install these screws through the edge of the deck board not the surface. To use the Pro-X1 Guide, attach one of the included driver bits to your drill, load Edge Deck Screws on both sides of the Guide, and drive. It s that easy! The built-in shoulder on the driver bit sets an automatic depth of drive which prevents over-driving the screw. The Pro-X1 Guide is ideal for treated lumber. It fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates an automatic 1/16 in. (1.58mm) spacing which is perfect for the typical shrinkage that occurs in treated lumber.
Features
- Pro-X1 Guide installs two patented CAMO Edge Deck Screws through the edge of the deck board-not the surface
- For exclusive use with CAMO Edge Deck Screws that auger material out to reduce splitting and cracking
- Attach included driver bit to your drill, load Edge Deck Screws on both sides of the Pro-X1 Guide, and drive
- Pro-X1 Guide is ideal for treated lumber
- Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates automatic 1/16 in. (1.58mm) spacing
- See more on Amazon...
Brand: Camo | Manufacturer: NATIONAL NAIL CORP
Item Dimensions: 8 x 9.5 x 2.5 inches (20.3 x 24.1 x 6.4 cm) | Package Dimensions: 2.2 x 8.27 x 8.9 inches (5.6 x 21.0 x 22.6 cm)
Amazon Price: $45.94 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $49.95 |
Used Price: $81.57
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #3
Freeman FS9G175 9-Gauge 1-3/4" Barbed Fencing Staples (1000 count) Corrosion and Rust Resistant
Model: FS9G175 | Mpn: FS9G175 | Ean: 0816376013892 | PartNumber: FS9G175 | Asin: B01BD8GQVE
Freeman FS9G175 9-Gauge 1-3/4" Hot Dipped Galvanized Fencing Staples (1000 count) are compatible with the Freeman PFS9, Stockade ST-400, and Power Mate FS2P. This fencing staple incorporates a barbed, divergent tip to ensure maximum holding power for the toughest of applications including livestock fencing, field fence, horse fencing, heavy mesh fencing, deer fencing, chain link fencing, and utility pole copper ground wire installation. Each box includes 1000 fencing staples to ensure you have plenty of fasteners at your fingertips while on the job.
Features
- Maximum Toughness: These 9 gauge 1-3/4" hot dipped galvanized fencing staples are compatible with Freeman PFS9, Stockade ST-400, and Power Mate FS2P. They incorporate a barbed, divergent tip to ensure maximum holding power for the toughest of applications.
- Many Uses: These tough and durable glue collated galvanized staples are ideal for a variety of uses including livestock fencing, field fence, horse fencing, heavy mesh fencing, deer fencing, chain link fencing, and utility pole copper ground wire installation.
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
- See more on Amazon...
Brand: Freeman | Manufacturer: Prime Global Products
Item Dimensions: 8 x 3 x 8 inches (20.3 x 7.6 x 20.3 cm) | Package Dimensions: 2.6 x 8.2 x 8.8 inches (6.6 x 20.8 x 22.4 cm)
Amazon Price: $74.00 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $74.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #4
Grip Rite 112HGFS5 5 lb Galvanized Fence Staple, 1-1/2"
Model: 112HGFS5 | Mpn: 112HGFS5 | Ean: 0764666141957 | PartNumber: 112HGFS5 | Asin: B000BDB9HE
The item is Grip Rite 112HGFS5 5 lb Galvanized Fence Staple, 1-1/2" . Used for Handtools & Tool Organizers, Staplers, Tackers & Staples. The product is manufactured in China.
Features
- The item is Grip Rite 112HGFS5 5 lb Galvanized Fence Staple, 1-1/2"
- Used for Handtools & Tool Organizers, Staplers, Tackers & Staples
- The product is manufactured in China
- Model number: 112HGFS5
- See more on Amazon...
Brand: Grip-Rite | Manufacturer: Jensen (Home Improvement)
Item Dimensions: 4.55 x 5.5 x 6 inches (11.6 x 14.0 x 15.2 cm) | Package Dimensions: 3.1 x 5.7 x 6.8 inches (7.9 x 14.5 x 17.3 cm)
Amazon Price: $15.49 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $15.49
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #5
HILLMAN FASTENERS 461296 3/4" Electro Galvanized Poultry Staple (87 pcs)
Model: 461296 | Mpn: 461296 | Ean: 0038902056108 | PartNumber: 461296 | Asin: B00YUW8OOS
The product is 3/4" Electro Galvanized Poultry Staple.. Easy to use. The product is manufactured in China.
Features
- The product is 3/4" Electro Galvanized Poultry Staple
- Easy to use
- The product is manufactured in China
- See more on Amazon...
Brand: Hillman Fasteners | Manufacturer: Hillman Fasteners
Item Dimensions: 4.5 x 3.2 x 1 inches (11.4 x 8.1 x 2.5 cm) | Package Dimensions: 1.89 x 3.31 x 4.61 inches (4.8 x 8.4 x 11.7 cm)
Amazon Price: $8.78 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 2-3 business days
List Price: $3.49
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #6
Trex Hideaway Start Clips 36 pc for 400 sq. ft. of decking
Model: STARTERCLIP01 | Mpn: FBA_STARTERCLIP01 | Ean: 0641753718981 | PartNumber: FBA_STARTERCLIP01 | Asin: B008BVMZDA
These starter clips for the Trex Hideaway Universal Hidden Fastening System -- for use on perimeter boards -- provide a clean, fastener-free appearance across the entire surface.
Features
- For use on Perimeter Boards
- 36 Start Clips in Bag
- .75 Start Clips needed for every 1 linear foot (i.e. 40' of decking would need 30 clips)
- Stanless steel for durability
- Quick and easy installation
- See more on Amazon...
Brand: TREX | Manufacturer: TREX
Package Dimensions: 0.5 x 3.7 x 5.8 inches (1.3 x 9.4 x 14.7 cm)
Amazon Price: $42.99 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $42.99 |
Used Price: $37.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #7
Prime-Line 9056313 Hex Lag Screws, 3/8 in. X 3 in., A307 Grade A Hot Dip Galvanized Steel, 25-Pack
Model: 9056313 | Mpn: 9056313 | Ean: 0049793105646 | PartNumber: 9056313 | Asin: B074ZMZRJQ
Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws, though a pilot hole is still required prior to installation. Note that lag screws do not accept nuts as they are technically thick heavy duty wood screws with threads designed to cut into wood. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.
Features
- Size: 3/8 inch X 3 inch
- Heavy duty wood screw with 6 sided hex bolt head
- Features deep wood screw threads and does not accept a nut
- Used in applications where standard wood screws cannot support the load (deck building, etc.)
- Requires pilot hole to be drilled and installs using wrench or socket tool
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line
Item Dimensions: 4 x 4 x 3 inches (10.2 x 10.2 x 7.6 cm) | Package Dimensions: 1.34 x 4.65 x 5.71 inches (3.4 x 11.8 x 14.5 cm)
Amazon Price: $13.39 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $11.54
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #8
Heat-Treated One-Way Lag Screw 5/16" x 3"
Model: 230372 | Mpn: 230372 | Ean: 0008236421385 | PartNumber: 230372 | Asin: B003VG39Z8
One-way lag screws, also known as security screws are commonly used in applications where either theft or vandalism is common or expected. Common applications include safes, security gates, public restroom fixtures and enclosures, and other scenarios requiring greater security. Heat-treated and made high quality, this screw meets strict standards having virtually no chance of shearing. This screw is designed with a slotted drive for simple installation with a standard slotted screwdriver. For greater security, the one-way lag screw requires an extraction tool for removal. Use this screw in a pre-drilled hole to prevent snapping.
Features
- Use for safes, security gates, public restroom fixtures/enclosures, and other applications that call for greater security
- Heat-treated and hardened to prevent breaking or snapping
- Slotted drive for simple installation with a standard slotted screwdriver
- Use in pre-drilled hole to prevent snapping
- Contains 50 pieces
- See more on Amazon...
Brand: Hillman | Manufacturer: The Hillman Group
Item Dimensions: 3 x 5.18 x 4.18 inches (7.6 x 13.2 x 10.6 cm) | Package Dimensions: 3.5 x 4.2 x 5.2 inches (8.9 x 10.7 x 13.2 cm)
Amazon Price: $27.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $27.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #9
Prime-Line 9055515 Hex Lag Screws, 5/16 in. X 1-1/2 in., A307 Grade A Zinc Plated Steel, 50-Pack
Model: 9055515 | Mpn: 9055515 | Ean: 0049793134141 | PartNumber: 9055515 | Asin: B074ZMYW3B
Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws, though a pilot hole is still required prior to installation. Note that lag screws do not accept nuts as they are technically thick heavy duty wood screws with threads designed to cut into wood. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.
Features
- Size: 5/16 inch X 1-1/2 inch
- Heavy duty wood screw with 6 sided hex bolt head
- Features deep wood screw threads and does not accept a nut
- Used in applications where standard wood screws cannot support the load (deck building, etc.)
- Requires pilot hole to be drilled and installs using wrench or socket tool
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line
Item Dimensions: 2 x 4 x 4 inches (5.1 x 10.2 x 10.2 cm) | Package Dimensions: 1.38 x 4.53 x 5.28 inches (3.5 x 11.5 x 13.4 cm)
Amazon Price: $9.87 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $8.86
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #10
5/16" X 4" Lag Bolt Black Zinc 10 Pack Renovator's Supply
Ean: 0096962413170 | PartNumber: 31949 | Asin: B019566936
Pack of 10 Black Zinc Lag Bolts Crafted High Quality that measures 5/16" x 4". Obtain this durable Black Zinc Lag Bolt Plated Item 31949
Features
- Black Zinc Plated Durable Lag Bolts
- Lag Bolts used on many projects by over tens of thousands of customers
- Lag Screws of 5/16 x 4
- See more on Amazon...
Brand: Renovators Supply Manufacturing | Manufacturer: Renovators Supply Manufacturing
Item Dimensions: 4 x 0.31 x 0.31 inches (10.2 x 0.8 x 0.8 cm) | Package Dimensions: 0.5 x 2.5 x 5 inches (1.3 x 6.4 x 12.7 cm)
Amazon Price: $11.99 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $11.99 |
Used Price: $10.02
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #11
12 pc Lag Screws 3/8 x 12 Tent Stakes Festival Kit with Chain Links and Washers
PartNumber: 362689909937 | Asin: B07TRW4T42
Lot of (12) hex lag screws, triple chain links, and flat washer to make a fantastic festival tie-down kit.
For use as tent stakes, tarp hooks, canopy anchors, etc.
Installs securely and easily into grass, sand, dirt, and clay with a cordless impact tool and can be just as easily removed and reused.
Mounts flush to the ground to prevent a tripping hazard and the triple chain links provide multiple points of attachment.
Kit contains:
(12) 307A zinc plated lag screws - 3/8" diameter thread and 12" in length with a 7" thread length and 9/16" head.
(12) triple links - 1/4" welded and zinc plated grade 30 proof coil chain links will not bend or distort offering a secure connection point.
(15) 3/8 SAE zinc plated flat washers.
Features
- Drive Size: 9/16" Hex
- (12) 307A zinc plated lag screws - 3/8 diameter thread and 12 in length.
- (12) Triple links - 1/4 welded and zinc plated grade 30 proof coil chain links
- (15) 3/8 SAE zinc plated flat washers
- Finish: Zinc Plated
- See more on Amazon...
Brand: Lexar Industrial | Manufacturer: Lexar Industrial
Amazon Price: $36.99 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 1-2 business days
List Price: $36.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #12
Freeman FS9G2 9-Gauge 2" Glue Collated Barbed Fencing Staples (1000 count) Rust and Corrosion Resistant for Fencing and Outdoor Use
Model: FS9G2 | Mpn: FS9G2 | Ean: 0816376014042 | PartNumber: FS9G2 | Asin: B06ZZGKCHW
The FS9G2 9-Gauge 2" Glue Collated Barbed Fencing Staples (1000 count) are ideal for livestock wire fencing, heavy mesh fencing, chain link fencing, and utility pole copper ground wire installation. A barbed, divergent tip on these solid steel staples ensures maximum holding power for the toughest of applications, and a class 3 hot dipped galvanized coating prevents rust and corrosion. These staples are the pinnacle of quality and value, and are compatible with most fencing staplers capable of firing 9 gauge 2" glue collated fencing staples such as the Freeman PFS9. Each box includes 1000 staples to ensure you have plenty of fasteners at your fingertips while on the job.
Features
- Nailed It: These 9 gauge 2" fencing staples are made of hot dipped galvanized steel to prevent rust and corrosion. They feature a divergent barbed tip for additional holding power. Each box includes 1000 staples for use with the Freeman PFS9.
- Many Uses: These fencing staples are ideal for livestock wire fencing, heavy mesh fencing, chain link fencing, and utility pole copper ground wire installation. They're compatible with any fencing stapler that uses 9 gauge fencing staples up to 2 in length.
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.
- See more on Amazon...
Brand: Freeman | Manufacturer: Prime Global Products
Item Dimensions: 2 x 0.75 x 4 inches (5.1 x 1.9 x 10.2 cm) | Package Dimensions: 2.25 x 8.25 x 8.75 inches (5.7 x 21.0 x 22.2 cm)
Amazon Price: $72.00 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $99.00 |
Used Price: $54.15
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #13
1/2" x 5" Hot Dipped Galvanized Lag Screws w/Flat Washers, Grade A, Quantity 25- by Fastener Depot, LLC
Ean: 0745373812118 | PartNumber: FD487570 | Asin: B07VMVMRSS
A Hex Lag Screw, also called a lag bolt, is a full-bodied threaded bolt with a hex head, spaced threads and a gimlet point. They are used mainly in wood construction. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.
Features
- Superior Corrosion Resistance
- External Hex Drive
- ASTM A307 Compliant
- Hot Dipped Galvanized
- See more on Amazon...
Brand: Fastener Depot | Manufacturer: Fastener Depot, LLC
Amazon Price: $38.79 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 1-2 business days
List Price: $38.79
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #14
MTB Fence Post Anchor Ground Spike Metal Black Powder Coated 32 x 4 x 4 Inches Outer Diameter (Inner Diameter 3.5 x3.5 Inches), Pack of 4
Ean: 0713049954370 | PartNumber: GSPB3244 | Asin: B0722VMSPV
Application: 1.Timber Construction 2.Solar Power Systems 3.City and Parks 4.Fencing Systems 5.Road and Traffic 6.Sheds and Containers 7.Flag Poles and Marks 8.Garden and Lei 9.Boards and Banners 10.Shaky board room This ground plate is idea where circumstances do not allow the anchor to be driven into the ground. such as concrete base, or on decking, this bolt-down gives the good solution. It can be the support for patio fencing, rose arches etc.
Features
- Easy installation of 3.5-inch by 3.5-inch wood posts without digging holes or pouring concrete.
- Various applications where quick-to-install posts are needed.
- 14 gauge rugged steel and 31.496'' in length
- Durable black powder coating for many years to come.
- Screws are included.
- See more on Amazon...
Brand: MTB | Manufacturer: MTB Supply Inc
Item Dimensions: 10 x 5 x 38 inches (25.4 x 12.7 x 96.5 cm) | Package Dimensions: 4.69 x 10 x 37.72 inches (11.9 x 25.4 x 95.8 cm)
Amazon Price: $65.00 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $65.00
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #15
1/2 X 18 Lag Screws / Hex Head / Steel / Zinc / 10 Pc. Carton
PartNumber: 476983 | Asin: B005EH2RA0
1/2" x 18" Lag Screws / Steel / Zinc
Brand: Fastener SuperStore | Manufacturer: Fastener Superstore, Inc.
Amazon Price: $27.68 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $27.68
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #16
Heat-Treated One-Way Lag Screw 5/16" x 4"
Model: 230373 | Mpn: 230373 | Ean: 0008236421408 | PartNumber: 230373 | Asin: B003VFY3JK
One-way lag screws, also known as security screws are commonly used in applications where either theft or vandalism is common or expected. Common applications include safes, security gates, public restroom fixtures and enclosures, and other scenarios requiring greater security. Heat-treated and made high quality, this screw meets strict standards having virtually no chance of shearing. This screw is designed with a slotted drive for simple installation with a standard slotted screwdriver. For greater security, the one-way lag screw requires an extraction tool for removal. Use this screw in a pre-drilled hole to prevent snapping.
Features
- Use for safes, security gates, public restroom fixtures/enclosures, and other applications that call for greater security
- Heat-treated and hardened to prevent breaking or snapping
- Slotted drive for simple installation with a standard slotted screwdriver
- Use in pre-drilled hole to prevent snapping
- Contains 50 pieces
- See more on Amazon...
Brand: The Hillman Group | Manufacturer: The Hillman Group
Item Dimensions: 3 x 5.18 x 4.18 inches (7.6 x 13.2 x 10.6 cm) | Package Dimensions: 2.9 x 4.2 x 5.3 inches (7.4 x 10.7 x 13.5 cm)
Amazon Price: $29.10 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $29.10
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #17
Star Drive Construction Lag Screw 1/4" x 1-1/2"
Model: 47866 | Mpn: 47866 | Ean: 0008236694970 | PartNumber: 47866 | Asin: B003W91FFA
Construction Lag Screws are perfect for your next outdoor project. Common applications include decks, stairs and playsets. These products have features that are both impressive and unique. Topping the list is the new "Star Drive" technology which virtually eliminates cam-out for a smooth, effortless drive every time. Chances for splitting wood are greatly reduced by the patented cross-cut threads and the wood biting cut point. These two features combine to prevent wood splitting by grinding wood and removing fibers from the hole. Use with treated lumber.
Features
- Reinforced neck, aggressive thread design, and type 17 cut point
- Truss head and star drive help eliminate cam-out for a smooth, effortless drive every time
- 1000 hour bronze ceramic coat for superior rust and corrosion protection
- Common applications include decks, stairs, playsets, and many other outdoor wood projects
- No pre-drilling required
- 75 pieces per package
- No pre-drilling
- Star drive helps eliminate campout
- Ideal for decks, stairs, play sets and many other outdoor projects
- See more on Amazon...
Brand: The Hillman Group | Manufacturer: The Hillman Group
Item Dimensions: 4.5 x 2.4 x 3.6 inches (11.4 x 6.1 x 9.1 cm) | Package Dimensions: 2.3 x 3.6 x 4.1 inches (5.8 x 9.1 x 10.4 cm)
Amazon Price: $12.72 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $7.89 |
Used Price: $13.69
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #18
HILLMAN FASTENERS 461632 Galvanized Fence Staple, 5 lb/1"
Model: 461632 | Mpn: 461632 | Ean: 0008236487794 | PartNumber: 461632 | Asin: B013EC5PAK
5 lb, 1 inch hot dipped galvanized fence staple.
Brand: Hillman Fasteners | Manufacturer: TV Non-Branded Items (Home Improvement)
Item Dimensions: 4.53 x 4.53 x 5.48 inches (11.5 x 11.5 x 13.9 cm) | Package Dimensions: 4.9 x 5 x 6.8 inches (12.4 x 12.7 x 17.3 cm)
Amazon Price: $17.13 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 1-2 business days
List Price: $9.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #19
Drake Off Road Consolidate and Strengthen Hose Clamp Pliers 1 Piece
Ean: 7865842191698 | PartNumber: w1545 | Asin: B06XC7BR4Z
Product Description Allows for extra reach, removal and locking of clamps into open position.Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm-54mm).Precision clamp on end of flexible cable allows for extended reach where other models cannot reach.Pliers can be locked, freeing up your hands and making your job easier and faster.Pliers have a lifetime warranty.Cable and spring are wearable items and must be replaced. Hose Clamp Pliers From the Manufacturer Hose Clamp Pliers has a re-engineered double gear lock lever with wider and deeper gears for secure locking. It also features a new and improved cable assembly with larger cable and stronger connection for maximum strength. New cable adjuster and multiple gear lock provide accurate and secure locking for any clamp position between minimum and maximum range. Unit allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm). Precision clamp on the end of the flexible cable allows for extended range where other models cannot reach. Pliers can be locked, freeing up your hands and making your job easier and faster
Features
- Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm)
- Precision clamp on end of flexible cable allows for extended reach where other models cannot reach
- Pliers can be locked, freeing up your hands and making your job easier and faster
- Re-engineered for maximum strength
- See more on Amazon...
Brand: Drake Off Road | Manufacturer: Drake Off Road
Item Dimensions: 1.1 x 6.81 x 10.98 inches (2.8 x 17.3 x 27.9 cm) | Package Dimensions: 1.14 x 6.81 x 11.02 inches (2.9 x 17.3 x 28.0 cm)
Amazon Price: $28.99 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $28.99
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #20
fischer 55006 DUOPOWER Wall Plug, Red/Grey, 6x30, Set of 100 Pieces
Model: 55006 | Mpn: 55006 | Ean: 4048962235562 | PartNumber: 55006 | Asin: B01LZL2JI1
The fischer duopower is an intelligent 2-component plug with three product functions. The intelligent universal plug is suitable for Fixing in all building materials. This allows a variety of applications with just one plug. The fischer duopower adjusts itself automatically to the building material and transfers the highest loads through the three product functions of folding, expanding and Knotting. The very good feedback from the plug when screwing the screw in generates extra security. The fischer duopower 6 x 50, 8 x 65 and 10 x 80, because of the larger anchorage depth, are particularly suitable for fixings in hollow building materials, aerated concrete and for bridge plaster.
Features
- Two component materials for top load values and intelligent functioning depending on the substrate.
- Great feedback (feel-good factor) of the plug. You can feel exactly when the plug is installed perfectly.
- Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole.
- The serrated anti-rotation feature prevents rotation in the drill hole during installation.
- Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting).
- See more on Amazon...
Brand: Fischer | Manufacturer: fischer
Package Dimensions: 1.73 x 2.83 x 3.54 inches (4.4 x 7.2 x 9.0 cm)
First Available: 2017-01-10
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #21
Hard-to-Find Fastener 014973455514 Hex Lag Screws, 5/16 x 3, Piece-12
Model: 014973455514 | Mpn: HLSHS-336-12 | Ean: 0738287350074 | PartNumber: HLSHS-336-12 | Asin: B00L1IJZTW
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light Zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Features
- Diameter: 5/16 inch
- Length: 3 inches
- Material: Steel
- Finish: Zinc
- Head Style: Hex (1/2 wrench)
- See more on Amazon...
Brand: Hard-to-Find Fastener | Manufacturer: Midwest Fastener Corp
Item Dimensions: 1.5 x 1.75 x 5.25 inches (3.8 x 4.4 x 13.3 cm) | Package Dimensions: 1.3 x 1.8 x 5.2 inches (3.3 x 4.6 x 13.2 cm)
Amazon Price: $5.63 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $6.75
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #22
Spax 4581820700765 1/4 x 3" T-Star Drive Washer Head HCR (Exterior) Powerlag Screw (50 Pieces per Box)
Model: 4581820700765 | Mpn: 4581820700765 | Ean: 0712216019171 | PartNumber: 4581820700765 | Asin: B018JQFBT6
Discover the Spax Advantage! this German engineered/American made Spax 1/4 x 3in. T-star Drive washer head HCR PowerLag offers a premium quality fastening solution to help ensure professional results in less time than inferior imported screws. Say good Bye to your fathers traditional lag. Spax PowerLags offer superior installation performance and durability over traditional lag screws and carriage bolts for structural wood construction. Made of carbon steel and coated for long term durability to ensure your project endures. Do it Once, do it right with Spax.
Features
- The trend setting low profile built-on washer head design offers a contemporary and sleek finished installation. Excellent draw down strength without the need for a separate washer delivers superior clamping ability and a easier installation
- Check out our Threads!! our patented thread technology allows the screw to be driven faster, is easier to install, and reduces splitting in wood. Let Spax take some of the hassle out of your next project
- High Corrosive resistant (HCR) coating makes these screws ideal for use in treated lumber and exterior applications
- Heat treated Grade 5 Durability. Subjecting the screw to heat treating gives greater strength and reduces breakage
- T-Star plus head provides superior bit engagement. Better bit engagement means quicker installation with less effort
- See more on Amazon...
Brand: SPAX | Manufacturer: ALtenloh, Brinck & Co. (ABC Spax)
Item Dimensions: 0.25 x 0.25 x 3 inches (0.6 x 0.6 x 7.6 cm) | Package Dimensions: 2.99 x 4.17 x 8.27 inches (7.6 x 10.6 x 21.0 cm)
Amazon Price: $19.02 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 1-2 business days
List Price: $23.40
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #23
Prime-Line 9056277 Hex Lag Screws, 3/8 in. X 3 in., A307 Grade A Zinc Plated Steel, 50-Pack
Model: 9056277 | Mpn: 9056277 | Ean: 0049793112408 | PartNumber: 9056277 | Asin: B074ZXK46T
Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws, though a pilot hole is still required prior to installation. Note that lag screws do not accept nuts as they are technically thick heavy duty wood screws with threads designed to cut into wood. They are ideal for use on decks since installation can be accomplished without having access to both ends of the fastener, as opposed to standard hex bolts that require a nut on the opposite end.
Features
- Size: 3/8 inch X 3 inch
- Heavy duty wood screw with 6 sided hex bolt head
- Features deep wood screw threads and does not accept a nut
- Used in applications where standard wood screws cannot support the load (deck building, etc.)
- Requires pilot hole to be drilled and installs using wrench or socket tool
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line
Item Dimensions: 4 x 4 x 3 inches (10.2 x 10.2 x 7.6 cm) | Package Dimensions: 1.89 x 6.89 x 7.36 inches (4.8 x 17.5 x 18.7 cm)
Amazon Price: $21.38 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $21.38
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #24
#14 x 1" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count
Ean: 0840129206026 | Asin: B07ZWK71MR
#14 (~1/4") x 1" CTX Construction Lag Star Drive Screws (100 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 1/4" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (1/2" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T25 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 100 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #14 Diameter by 1" Long. Use T25 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #14 Shank --- 2858 lbs Average Pull-Out Strength ----------------- 897 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (100 LAG SCREW COUNT) Easy Install Torx
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.5 x 0.5 x 1 inches (1.3 x 1.3 x 2.5 cm) | Package Dimensions: 1 x 1.6 x 3 inches (2.5 x 4.1 x 7.6 cm)
Amazon Price: $22.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $22.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #25
#15 x 3" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count
Ean: 0840129206224 | Asin: B07ZVYQ4HX
#15 (~5/16") x 3' CTX Construction Lag Star Drive Screws (100 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (5/8" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T30 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 100 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #15 Diameter by 3" Long. Use T30 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #14 Shank --- 5102 lbs Average Pull-Out Strength ----------------- 1275 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (100 LAG SCREW COUNT) Easy Install Torx
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.62 x 0.62 x 3 inches (1.6 x 1.6 x 7.6 cm) | Package Dimensions: 4.21 x 4.29 x 4.45 inches (10.7 x 10.9 x 11.3 cm)
Amazon Price: $40.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $40.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #26
#17 x 10" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 250 Screw Count
Ean: 0840129206347 | Asin: B07ZWNDJ8B
#17 (~3/8") x 10 " CTX Construction Lag Star Drive Screws (250 Count) Exterior Coated Screws (1200 Hour Salt Spray Test) Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation Excellent Screws for Hard & Soft Wood High Quality Heat Treated Steel 5/16" Construction Lag Screw Thread Diameter Modified Truss Head Screw (11/16" Head Diameter) - Better Compression Forces Deep, Wide, Sharp Screw Threads - Maximum Holding Power High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials Knurled Screw Shoulder Lowers Drill Torque Requirements Type 17 Screw Point for Quick Starts without "Walking" Use T40 Driver Bit Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. 250 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #17 Diameter by 10" Long. Use T40 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #17 Shank --- 5294 lbs Average Pull-Out Strength ----------------- 2082 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (250 LAG SCREW COUNT) Torx Drive
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.68 x 0.68 x 10 inches (1.7 x 1.7 x 25.4 cm) |
Amazon Price: $321.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $321.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #27
#17 x 8" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 250 Screw Count
Ean: 0840129206323 | Asin: B07ZWHK9VN
#17 (~3/8") x 8" CTX Construction Lag Star Drive Screws (250 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (11/16" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T40 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 250 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #17 Diameter by 8" Long. Use T25 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #17 Shank --- 5294 lbs Average Pull-Out Strength -------2082 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (250 LAG SCREW COUNT) Torx Drive
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.68 x 0.68 x 8 inches (1.7 x 1.7 x 20.3 cm) |
Amazon Price: $241.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $241.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #28
#17 x 6" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 250 Screw Count
Ean: 0840129206422 | Asin: B07ZWCJ2TK
#17 (~3/8") x 6" CTX Construction Lag Star Drive Screws (250 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (11/16" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T40 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 250 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #17 Diameter by 6" Long. Use T40 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #17 Shank --- 5294 lbs Average Pull-Out Strength ----------------- 2082 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Lag Screws (250 LAG SCREW COUNT)
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.68 x 0.68 x 6 inches (1.7 x 1.7 x 15.2 cm) |
Amazon Price: $165.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $165.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #29
#15 x 4" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count
Ean: 0840129206255 | Asin: B07ZWG3DK9
#15 (~5/16") x 4' CTX Construction Lag Star Drive Screws (100 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (5/8" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T30 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 100 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #15 Diameter by 4" Long. Use T30 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #15 Shank --- 5102 lbs Average Pull-Out Strength ----------------- 1275 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (100 LAG SCREW COUNT) Easy Install Torx
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.62 x 0.62 x 4 inches (1.6 x 1.6 x 10.2 cm) | Package Dimensions: 2.13 x 6.69 x 8.5 inches (5.4 x 17.0 x 21.6 cm)
Amazon Price: $47.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $47.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #30
#14 x 4" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count
Ean: 0840129206118 | Asin: B07ZWH56KK
#14 (~1/4") x 4" CTX Construction Lag Star Drive Screws (500 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 1/4" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (1/2" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T25 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 500 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #14 Diameter by 4" Long. Use T25 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #14 Shank --- 2858 lbs Average Pull-Out Strength ----------------- 897 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (500 LAG SCREW COUNT) Torx Drive
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.5 x 0.5 x 4 inches (1.3 x 1.3 x 10.2 cm) |
Amazon Price: $134.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $134.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #31
#15 x 4" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 400 Count
Ean: 0840129206484 | Asin: B07ZWKKLG1
#15 (~5/16") x 4' CTX Construction Lag Star Drive Screws (400 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (5/8" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T30 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 400 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #15 Diameter by 4" Long. Use T30 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #15 Shank --- 5102 lbs Average Pull-Out Strength ----------------- 1275 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (400 LAG SCREW COUNT) Torx Drive
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.62 x 0.62 x 4 inches (1.6 x 1.6 x 10.2 cm) |
Amazon Price: $141.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $141.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #32
#15 x 2-1/2" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head -Full Box -600 Screw Count
Ean: 0840129206194 | Asin: B07ZWC1B88
#15 (~5/16") x 2-1/2' CTX Construction Lag Star Drive Screws (600 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 5/16" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (5/8" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T30 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 600 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #15 Diameter by 2-1/2" Long. Use T30 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #15 Shank --- 5102 lbs Average Pull-Out Strength ----------------- 1275 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (600 LAG SCREW COUNT) Torx Drive
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.62 x 0.62 x 2.5 inches (1.6 x 1.6 x 6.4 cm) |
Amazon Price: $134.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $134.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon #33
#14 x 5" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count
Ean: 0840129206149 | Asin: B07ZWNPJNW
#14 (~1/4") x 5" CTX Construction Lag Star Drive Screws (100 Count) - Exterior Coated Screws (1200 Hour Salt Spray Test) - Construction Lags Far Exceeds Standard Lag Bolts in Shear Force, Compression Forces & Ease of Installation - Excellent Screws for Hard & Soft Wood - High Quality Heat Treated Steel - 1/4" Construction Lag Screw Thread Diameter - Modified Truss Head Screw (1/2" Head Diameter) - Better Compression Forces - Deep, Wide, Sharp Screw Threads - Maximum Holding Power - High Quality Screw Threads Cut Cleanly & Easily Through Tough Materials - Knurled Screw Shoulder Lowers Drill Torque Requirements - Type 17 Screw Point for Quick Starts without "Walking" - Use T25 Driver Bit - Deep Torx/Star Drive Screws Reduce "Cam-out" - Easy Installation - Excellent Screw for construction applications including, Decking, Fencing, Roofing, Framing, Timber Frame, Post & Beam etc. - 100 Count Exterior Coated Construction Lag Screws High Performance Exterior Coated Torx/Star Drive Wood Construction Lag Screws "CTX", #14 Diameter by 5" Long. Use T25 Torx/Star Drive Bit for Installing Construction Lag Wood Screws. Bulk Quality Wood Screws for the Best Value. Our Bronze Star Torx/Star Drive Screws are an Excellent Fastener for Many Applications in Hard and Soft Woods, Chipboard, & Tough Materials. Our Exterior Coated Construction Lag Wood Screws are an Excellent Multipurpose Fastener for Professional Operations & Demanding Industries. Our Construction Lag Screws are Strong - Can be Removed & Reused. Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads Screw Engineering Specs: Average Shear Strength of #14 Shank --- 2858 lbs Average Pull-Out Strength ----------------- 897 lbs (Screw Pull Out is Calculated with a 3" Length Screw in the wood species: Yellow Pine Wood)
Features
- High Performance Exterior Coated Star/Torx Drive Wood Screws (100 LAG SCREW COUNT) Easy Install Torx
- Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
- Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
- Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
- Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads
- See more on Amazon...
Brand: Jake Sales | Manufacturer: Jake Sales
Item Dimensions: 0.5 x 0.5 x 5 inches (1.3 x 1.3 x 12.7 cm) | Package Dimensions: 1.85 x 4.72 x 7.91 inches (4.7 x 12.0 x 20.1 cm)
Amazon Price: $43.95 | as of 12/06/2019
(4:13am pst)Availibility: Usually ships in 24 hours
List Price: $43.95
See Amazon Reviews | Add to your Amazon Wishlist
See On Amazon
Looking For Something Else?
Search