Frontpage > Car & Automotive > Performance Parts > Exhaust Heat Wrap Matting & Sleeving

Best Exhaust Heat Wrap Matting & Sleeving - Buying Guide

Last Updated: 11/17/2018

Share on


  #1

Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll

Model: 204012   |    Mpn: 204012   |    Ean: 0819825010725   |    PartNumber: 204012   |   Asin: B00FS6CKUO

Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and Heatshield Products know custom builds have lots of tight places. Available in 10 feet and 100 feet rolls.

Features

  • Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals and more
  • Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.1 x 2.7 x 7.1 inches (2.8 x 6.9 x 18.0 cm)   |   Package Dimensions: 1.5 x 4.75 x 8 inches (3.8 x 12.1 x 20.3 cm)

First Available: 2013-12-24

Amazon Price: $19.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $28.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Design Engineering 010419 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 1" x 3'

Model: 010419   |    Mpn: 010419   |    Ean: 0607078104199   |    PartNumber: 010419   |   Asin: B001HYZYD6

DEI Heat Sheath is an aluminized sleeving sesigned to slide over wires, cables and hoses. Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500 degrees Fahrenheit.

Features

  • Slide over wires, cables and hoses for extreme heat protection
  • Withstands 500 degrees F direct, continuous heat and 2000 degrees F radiant heat
  • Pliable for tight bends
  • Trim to desired length
  • Five popular diameters to choose from: 1/2, 3/4, 1, 1-1/4, and 1-1/2
  • See more on Amazon...

Brand: Design Engineering   |   Manufacturer: Design Engineering

Item Dimensions: 24 x 48 x 132 inches (61.0 x 121.9 x 335.3 cm)   |   Package Dimensions: 1.5 x 3.3 x 9.4 inches (3.8 x 8.4 x 23.9 cm)

Amazon Price: $13.99 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $18.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Heatshield Products (204018) 1" ID x 10' Hot Rod Sleeve Roll

Model: 204018   |    Mpn: 204018   |    Ean: 0819825010749   |    PartNumber: 204018   |   Asin: B00FS9K69I

Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and Heatshield Products know custom builds have lots of tight places. Available in 10 feet and 100 feet rolls.

Features

  • Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals and more
  • Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 2.5 x 4.5 x 7.7 inches (6.4 x 11.4 x 19.6 cm)   |   Package Dimensions: 2.5 x 4.5 x 7.7 inches (6.4 x 11.4 x 19.6 cm)

First Available: 2013-12-24

Amazon Price: $40.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $48.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Heatshield Products 201072 1" ID x 6' Long HP Thermal Sleeve

Model: 201072   |    Mpn: 201072   |    Ean: 0819825010480   |    PartNumber: 201072   |   Asin: B000QFQE2C

Use the HP Thermal Sleeve as a heat shield to protect wires, fuel lines, brake lines, battery cables, EGR tubes, and more. The special weave of the sleeving allows it to expand over plugs and fittings when installing. Thermal sleeving reduces radiant heat transfer and also dissipates heat. Capable of withstanding 1000F of continuous heat, this sleeving is ideal for protecting components that are very close to exhaust system. Fasten using Thermal-Tie, Cool Foil Tape, or hose clamp.

Features

  • Continuous operating temperature of 1000 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percentage of radiant heat
  • Helps to prevent vapor lock, protects wires from melting
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.5 x 4.5 x 7.7 inches (3.8 x 11.4 x 19.6 cm)   |   Package Dimensions: 1.5 x 4.5 x 7.7 inches (3.8 x 11.4 x 19.6 cm)

Amazon Price: $25.40 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $41.50

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Heatshield Products 280008 Lava Tube Sleeve Shield 1" ID x 3'

Model: 280008   |    Mpn: 280008   |    Ean: 0819825014891   |    PartNumber: 280008   |   Asin: B01D479FHE

Lava Tube is a tube-shaped thermal barrier product designed to protect sensitive components in environments with excessive ambient temperatures and direct heat. The material is a specially formulated Heatshield Products fibrous thermal barrier weave made from volcanic rock - extremely durable against abrasions and chemical exposure. The basalt fiber allows Lava Tube to protect components from continuous temperatures of 1,200 degrees Fahrenheit, and intermittent temperatures of 2,000 degrees Fahrenheit. This makes Lava Tube an ideal and superior alternative to silicon-based thermal barrier sleeves in applications above 500 degrees Fahrenheit. Lava Tube is also extremely durable against abrasions and chemical exposure. Made in the USA. Lava Tube has been designed with a special hook-and-loop fastener system, so it can be installed without the need for disassembling components or removing lines and hoses. Lava Tube is available in four diameters ranging from 1/2-inch to 1 1/2-inches, and either 3-foot long or 10-foot long rolls. Custom lengths are also available. It can be easily cut to length.

Features

  • Protect wiring, hoses, fuel lines, hydraulic lines, and more with Lava Tube
  • Designed to protect sensitive components in environments with excessive ambient temperatures and direct heat
  • Protect components from continuous temperatures of 1,200 degrees Fahrenheit, and intermittent temperatures of 2,000 degrees Fahrenheit
  • Material is a specially formulated Heatshield Products fibrous thermal barrier weave made from volcanic rock
  • Designed with a special hook-and-loop fastener system, so it can be installed without the need for disassembling components or removing lines and hoses
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Package Dimensions: 1.02 x 5 x 8 inches (2.6 x 12.7 x 20.3 cm)

First Available: 2016-03-18

Amazon Price: $38.93 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Heatshield Products (204014) 3/4" ID x 10' Hot Rod Sleeve Roll

Model: 204014   |    Mpn: 204014   |    Ean: 0819825010732   |    PartNumber: 204014   |   Asin: B00FS9K53U

Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and Heatshield Products know custom builds have lots of tight places. Available in 10 feet and 100 feet rolls.

Features

  • Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals and more
  • Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.4 x 4.5 x 7.5 inches (3.6 x 11.4 x 19.1 cm)   |   Package Dimensions: 1.4 x 4.5 x 7.5 inches (3.6 x 11.4 x 19.1 cm)

First Available: 2013-12-24

Amazon Price: $21.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $32.31 | Used Price: $25.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Heatshield Products 353010 HP Heat Shrink 1/2" ID (Pack of 10)

Model: 353010   |    Mpn: 353010   |    Ean: 0819825014952   |    PartNumber: 353010   |   Asin: B01D479EZC

HP Shrink is extra flexible and has a low shrink threshold making them ideal to seal off any high temperature sleeve! The very flexible polyolefin tubing has a 3:1 shrink ratio and meets all AMS-DTL-23053/5C, UL and CSA specifications. HP Shrink is a great alternative to zip ties, tape, and prove a clean tight seal with a professional look. Sealing the ends of any heat shield sleeve, improves the efficiency and prevents hot air for working its way in between your hose or wire. We offer them in black with yellow logo in diameters of 1/2, 3/4, 1-1/2, and 3 inch to fit whatever you need. Shrink and seal your way to optimize your heat sleeve.

Features

  • HP Shrink is an alternative to zip ties, tape, and prove a clean tight seal with a quality look
  • Extra flexible and has a low shrink threshold making them ideal to seal off any high temperature sleeve
  • Flexible polyolefin tubing has a 3:1 shrink ratio and meets all AMS-DTL-23053/5C, UL and CSA specifications
  • Made in the USA
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.25 x 2.87 x 8 inches (3.2 x 7.3 x 20.3 cm)   |   Package Dimensions: 1.02 x 2.6 x 7.87 inches (2.6 x 6.6 x 20.0 cm)

First Available: 2016-03-18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Heatshield Products 274200 Thermaflect Sleeve 2" ID x 3' Heat Shield Sleeve with Velcro

Model: 274200   |    Mpn: 274200   |    Ean: 0736211220813   |    PartNumber: 274200   |   Asin: B0051UQWFG

Shield your wiring, lines, and cables safe from heat. Forget about that old fire silicone sleeving (450F max); Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). It is excellent to use on your fuel lines, wiring looms, air intake, intercooler pipes, and air conditioner hoses. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation. Weight there is more; a 3 foot length the Thermaflect Sleeve weighs less than 6 inches of the silicone fire sleeve of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat. Also available in a hook and loop seam.

Features

  • Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 90 percentage of radiant heat
  • Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
  • Hook and loop seam allows installation without component assembly
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1 x 2.8 x 7.9 inches (2.5 x 7.1 x 20.1 cm)   |   Package Dimensions: 1 x 2.8 x 7.9 inches (2.5 x 7.1 x 20.1 cm)

Amazon Price: $39.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $49.47

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Heatshield Products 315042 HP Color Exhaust Wrap Blue 2" Wide x 25' Exhaust Wrap

Model: 315042   |    Mpn: 315042   |    Ean: 0718122204489   |    PartNumber: 315042   |   Asin: B0051URXYK

HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times. Wrapping the header and exhaust system with Their colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster. Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. The colored exhaust wrap withstand 1200F continuous and 2000F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire. HP Color Exhaust Wrap is available in blue, red, yellow, black, silver, purple, and green. The color exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. HP Color Exhaust Wrap is noncombustible, it is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Features

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage
  • Increases horsepower
  • All rolls of exhaust wrap are 1/16 inches thick
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Package Dimensions: 2.4 x 4.3 x 6.9 inches (6.1 x 10.9 x 17.5 cm)

Amazon Price: $20.00 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $20.00

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Thermo-Tec 11002 2" X 50' Exhaust Wrap

Model: 11002   |    Mpn: 11002   |    Ean: 0055829110027   |    PartNumber: 11002   |   Asin: B00029KC02

The original Exhaust Insulating Header Wrap was developed over 23 years ago by Thermo-Tec. Exhaust Insulating Header Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.

Features

  • The Thermo-Tec wrap effectively improves the scavenging of exhaust gases by the headers from the engine's combustion chambers
  • Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density
  • Exhaust Insulating Wrap withstands continuous heat up to 2000 degrees Fahrenheit and contains no asbestos
  • Thermo-Tec exhaust wrap will not over-insulate a system when properly installed
  • See more on Amazon...

Brand: Thermo-Tec   |   Manufacturer: Thermo-Tec Products

Package Dimensions: 2.4 x 7.1 x 8.3 inches (6.1 x 18.0 x 21.1 cm)

Amazon Price: $36.89 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $54.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Heatshield Products 353014 HP Heat Shrink 3/4" ID (Pack of 8)

Model: 353014   |    Mpn: 353014   |    Ean: 0819825014976   |    PartNumber: 353014   |   Asin: B01D479KFQ

HP Shrink is extra flexible and has a low shrink threshold making them ideal to seal off any high temperature sleeve! The very flexible polyolefin tubing has a 3:1 shrink ratio and meets all AMS-DTL-23053/5C, UL and CSA specifications. HP Shrink is a great alternative to zip ties, tape, and prove a clean tight seal with a professional look. Sealing the ends of any heat shield sleeve, improves the efficiency and prevents hot air for working its way in between your hose or wire. We offer them in black with yellow logo in diameters of 1/2, 3/4, 1-1/2, and 3 inch to fit whatever you need. Shrink and seal your way to optimize your heat sleeve.

Features

  • HP Shrink is an alternative to zip ties, tape, and prove a clean tight seal with a quality look
  • Extra flexible and has a low shrink threshold making them ideal to seal off any high temperature sleeve
  • Flexible polyolefin tubing has a 3:1 shrink ratio and meets all AMS-DTL-23053/5C, UL and CSA specifications
  • Made in the USA
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.25 x 2.87 x 8 inches (3.2 x 7.3 x 20.3 cm)   |   Package Dimensions: 1.25 x 2.87 x 8 inches (3.2 x 7.3 x 20.3 cm)

First Available: 2016-03-18

Amazon Price: $11.55 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Thermo-Tec 18050 Black 1/2" X 3' Heat Sleeve

Model: 18050   |    Mpn: 18050   |    Ean: 0755829180500   |    PartNumber: 18050   |   Asin: B002TRHAB4

This new silicone-coated fiberglass fire sleeving is designed to protect wires, cables and hoses from high-temperature exposure, liquid spills and occasional exposure to flame.

Features

  • The high-quality sleeving is made in the U.S.A. from braided fiberglass and coated with a compound silicone rubber
  • It is capable of continuous protection to 500 degrees Fahrenheit and short-term exposure through 2200 degrees Fahrenheit
  • Available in two colors, silver and black
  • See more on Amazon...

Brand: Thermo-Tec   |   Manufacturer: Thermo-Tec Products

Package Dimensions: 2.2 x 7 x 8.3 inches (5.6 x 17.8 x 21.1 cm)

Amazon Price: $18.49 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $28.02

Warranty: 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Heatshield Products 315055 HP Color Exhaust Wrap Silver 2" Wide x 50' Exhaust Wrap

Model: 315055   |    Mpn: 315055   |    Ean: 0718122204885   |    PartNumber: 315055   |   Asin: B0051US37G

HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times. Wrapping the header and exhaust system with Their colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster. Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. The colored exhaust wrap withstand 1200F continuous and 2000F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire. HP Color Exhaust Wrap is available in blue, red, yellow, black, silver, purple, and green. The color exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. HP Color Exhaust Wrap is noncombustible, it is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Features

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage
  • Increases horsepower
  • All rolls of exhaust wrap are 1/16 inches thick
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Package Dimensions: 2.3 x 7.1 x 7.9 inches (5.8 x 18.0 x 20.1 cm)

Amazon Price: $40.00 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $40.00

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Heatshield Products 240003 1-3/4" ID to 2-3/8" ID x 3' Long HP Hose Sleeve

Model: 240003   |    Mpn: 240003   |    Ean: 0819825011166   |    PartNumber: 240003   |   Asin: B002U4Y9LA

Shield radiator hoses, hydraulic hoses, hoses from heat damage, increasing their life and preventing maintenance breakdowns. Use HP Hose Sleeving to insulate air intake tubes from radiant heat lowering your intake temperatures and increasing horsepower. Special coating allows this sleeving to reflect and dissipate heat. The special braid of sleeving allows it to have an expandable inside diameter from 1 3/4 inch to 2 3/8 inch. Thermal Hose Sleeving is capable of withstanding 1200F continuous. It may be fastened using Thermal-Tie or hose clamp.

Features

  • Continuous operating temperature of 1200 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percentage of radiant heat
  • Helps to prevent vapor lock, protects wires from melting
  • Sleeving wall thickness is 1/16 inches
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1.85 x 4.75 x 8 inches (4.7 x 12.1 x 20.3 cm)   |   Package Dimensions: 1.5 x 4.5 x 7.9 inches (3.8 x 11.4 x 20.1 cm)

Amazon Price: $33.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $40.99

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Heatshield Products 274212 Thermaflect Sleeve 2-1/2" ID x 3' Heat Shield Sleeve with Velcro

Model: 274212   |    Mpn: 274212   |    Ean: 0819825011630   |    PartNumber: 274212   |   Asin: B002UH0BAU

Shield your wiring, lines, and cables safe from heat. Forget about that old fire silicone sleeving (450F max); Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). It is excellent to use on your fuel lines, wiring looms, air intake, intercooler pipes, and air conditioner hoses. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation. Weight there is more; a 3 foot length the Thermaflect Sleeve weighs less than 6 inches of the silicone fire sleeve of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat. Also available in a hook and loop seam.

Features

  • Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 90 percentage of radiant heat
  • Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
  • Hook and loop seam allows installation without component assembly
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1 x 2.9 x 8 inches (2.5 x 7.4 x 20.3 cm)   |   Package Dimensions: 1 x 2.9 x 8 inches (2.5 x 7.4 x 20.3 cm)

Amazon Price: $41.87 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $54.00

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Heatshield Products 201012 1/2" ID x 6' Long HP Thermal Sleeve

Model: 201012   |    Mpn: 201012   |    Ean: 0819825010466   |    PartNumber: 201012   |   Asin: B000QFORDU

Use the HP Thermal Sleeve as a heat shield to protect wires, fuel lines, brake lines, battery cables, EGR tubes, and more. The special weave of the sleeving allows it to expand over plugs and fittings when installing. Thermal sleeving reduces radiant heat transfer and also dissipates heat. Capable of withstanding 1000F of continuous heat, this sleeving is ideal for protecting components that are very close to exhaust system. Fasten using Thermal-Tie, Cool Foil Tape, or hose clamp.

Features

  • Continuous operating temperature of 1000 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percentage of radiant heat
  • Helps to prevent vapor lock, protects wires from melting
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 1 x 2.7 x 8 inches (2.5 x 6.9 x 20.3 cm)   |   Package Dimensions: 1 x 2.7 x 8 inches (2.5 x 6.9 x 20.3 cm)

Amazon Price: $17.28 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $18.19

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Heatshield Products 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap

Model: 315041   |    Mpn: 315041   |    Ean: 0718122202683   |    PartNumber: 315041   |   Asin: B0051URXJ0

HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times. Wrapping the header and exhaust system with Their colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster. Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. The colored exhaust wrap withstand 1200F continuous and 2000F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire. HP Color Exhaust Wrap is available in blue, red, yellow, black, silver, purple, and green. The color exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. HP Color Exhaust Wrap is noncombustible, it is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Features

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage
  • Increases horsepower
  • All rolls of exhaust wrap are 1/16 inches thick
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Package Dimensions: 2.4 x 4.2 x 6.9 inches (6.1 x 10.7 x 17.5 cm)

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Heatshield Products (204104) 3/4" ID x 100' Hot Rod Sleeve Roll

Model: 204104   |    Mpn: 204104   |    Ean: 0819825010770   |    PartNumber: 204104   |   Asin: B00FS9KA4Y

Hot Rod Sleeve is thermal sleeving capable of withstanding 1100 degree Fahrenheit continuous. This non-flammable sleeve has a special weave that allows it to expand and contract over fittings. In addition, it has that old school sleeve look with modern heat shield technology. Ideal for shielding fuel lines - helping to stop vapor lock, protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. This enables you to fit things into those tight places, and Heatshield Products know custom builds have lots of tight places. Available in 10 feet and 100 feet rolls.

Features

  • Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 60 percent of radiant heat
  • Special weave that allows it to expand and contract over fittings, terminals and more
  • Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 6.2 x 9.8 x 9.8 inches (15.7 x 24.9 x 24.9 cm)   |   Package Dimensions: 6.2 x 9.8 x 9.8 inches (15.7 x 24.9 x 24.9 cm)

First Available: 2013-12-24

Amazon Price: $197.99 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $244.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Heatshield Products 274309 Thermaflect Sleeve 4" ID x 10' Heat Shield Sleeve with Velcro

Model: 274309   |    Mpn: 274309   |    Ean: 0819825011746   |    PartNumber: 274309   |   Asin: B0051UR2UU

Shield your wiring, lines, and cables safe from heat. Forget about that old fire silicone sleeving (450F max); Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). It is excellent to use on your fuel lines, wiring looms, air intake, intercooler pipes, and air conditioner hoses. By keeping fuel and air intake temperatures cool it helps to prevent vapor lock, improves performance, improves mileage and also reduces fuel evaporation. Weight there is more; a 3 foot length the Thermaflect Sleeve weighs less than 6 inches of the silicone fire sleeve of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat. Also available in a hook and loop seam.

Features

  • Continuous operating reflective temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent
  • Capable of reducing up to 90 percentage of radiant heat
  • Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
  • Hook and loop seam allows installation without component assembly
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Item Dimensions: 2.9 x 7.5 x 7.9 inches (7.4 x 19.1 x 20.1 cm)   |   Package Dimensions: 2.9 x 7.5 x 7.9 inches (7.4 x 19.1 x 20.1 cm)

Amazon Price: $154.57 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 24 hours
List Price: $162.71

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Heatshield Products 315048 HP Color Exhaust Wrap Green 2" Wide x 25' Exhaust Wrap

Model: 315048   |    Mpn: 315048   |    Ean: 0689466469462   |    PartNumber: 315048   |   Asin: B0051US0XI

HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times. Wrapping the header and exhaust system with Their colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster. Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. The colored exhaust wrap withstand 1200F continuous and 2000F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire. HP Color Exhaust Wrap is available in blue, red, yellow, black, silver, purple, and green. The color exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. HP Color Exhaust Wrap is noncombustible, it is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

Features

  • Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
  • Reduces under hood temperatures up to 50 percentage
  • Increases horsepower
  • All rolls of exhaust wrap are 1/16 inches thick
  • See more on Amazon...

Brand: Heatshield Products   |   Manufacturer: Heatshield Products

Package Dimensions: 2.3 x 4.5 x 7.8 inches (5.8 x 11.4 x 19.8 cm)

Amazon Price: $25.00 | as of 11/17/2018(9:10am pst)
Availibility: Usually ships in 1-2 business days
List Price: $25.00

Warranty: Limited 120 Day Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Heatshield Products (204014) 3/4" ID x 10' Hot Rod Sleeve Roll
  2. Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll
  3. Design Engineering 010419 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 1" x 3'
  4. Heatshield Products (204018) 1" ID x 10' Hot Rod Sleeve Roll
  5. Thermo-Tec 11002 2" X 50' Exhaust Wrap
  6. Heatshield Products 240003 1-3/4" ID to 2-3/8" ID x 3' Long HP Hose Sleeve
  7. Heatshield Products 201072 1" ID x 6' Long HP Thermal Sleeve
  8. Heatshield Products 274212 Thermaflect Sleeve 2-1/2" ID x 3' Heat Shield Sleeve with Velcro
  9. Heatshield Products 201012 1/2" ID x 6' Long HP Thermal Sleeve
  10. Heatshield Products 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap

Most Wished For

  1. Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll
  2. Heatshield Products (204014) 3/4" ID x 10' Hot Rod Sleeve Roll
  3. Heatshield Products 274200 Thermaflect Sleeve 2" ID x 3' Heat Shield Sleeve with Velcro
  4. Design Engineering 010419 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 1" x 3'
  5. Heatshield Products 353014 HP Heat Shrink 3/4" ID (Pack of 8)
  6. Thermo-Tec 18050 Black 1/2" X 3' Heat Sleeve
  7. Heatshield Products (204018) 1" ID x 10' Hot Rod Sleeve Roll
  8. Heatshield Products 201072 1" ID x 6' Long HP Thermal Sleeve
  9. Thermo-Tec 11002 2" X 50' Exhaust Wrap
  10. Heatshield Products 315055 HP Color Exhaust Wrap Silver 2" Wide x 50' Exhaust Wrap

Most Gifted

  1. Heatshield Products (204014) 3/4" ID x 10' Hot Rod Sleeve Roll
  2. Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll
  3. Design Engineering 010419 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 1" x 3'
  4. Heatshield Products (204018) 1" ID x 10' Hot Rod Sleeve Roll
  5. Thermo-Tec 11002 2" X 50' Exhaust Wrap
  6. Heatshield Products 240003 1-3/4" ID to 2-3/8" ID x 3' Long HP Hose Sleeve
  7. Heatshield Products 201072 1" ID x 6' Long HP Thermal Sleeve
  8. Heatshield Products 274212 Thermaflect Sleeve 2-1/2" ID x 3' Heat Shield Sleeve with Velcro
  9. Heatshield Products 201012 1/2" ID x 6' Long HP Thermal Sleeve
  10. Heatshield Products 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap

Top Selling

  1. Heatshield Products (204012) 1/2" ID x 10' Hot Rod Sleeve Roll
  2. Design Engineering 010419 Heat Sheath - Aluminized Sleeving for Ultimate Heat Protection, 1" x 3'
  3. Heatshield Products (204018) 1" ID x 10' Hot Rod Sleeve Roll
  4. Heatshield Products 201072 1" ID x 6' Long HP Thermal Sleeve
  5. Heatshield Products 280008 Lava Tube Sleeve Shield 1" ID x 3'
  6. Heatshield Products (204014) 3/4" ID x 10' Hot Rod Sleeve Roll
  7. Heatshield Products 353010 HP Heat Shrink 1/2" ID (Pack of 10)
  8. Heatshield Products 274200 Thermaflect Sleeve 2" ID x 3' Heat Shield Sleeve with Velcro
  9. Heatshield Products 315042 HP Color Exhaust Wrap Blue 2" Wide x 25' Exhaust Wrap
  10. Thermo-Tec 11002 2" X 50' Exhaust Wrap



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.