Frontpage > Car & Automotive > Replacement Parts > Suspension Idler Arms

Best Suspension Idler Arms - Buying Guide

Last Updated: 08/20/2019

Share on


  #1

MOOG K6535HD Steering Idler Arm

Model: K6535HD   |    Mpn: K6535HD   |    Ean: 0080066033310   |    PartNumber: K6535HD   |   Asin: B00IAC2SEG

Over 70 years of aftermarket engineering and product expertise has made MOOG an industry leader in driveline quality and customer satisfaction.

Features

  • Greaseable u-joint allows for new grease to flush out contamination and moisture reducing corrosion and wear.
  • Patented thrust washer technology absorbs axial loads preventing metal to metal contact and ensures even grease distribution to the wear surfaces. Thrust washers are manufactured to tight tolerances to allow for easier driveshaft balancing.
  • Includes an exclusive anti-drainback design to control lubrication flow and prevent dry start up.
  • Needle bearings and snap rings are sourced from an original equipment supplier. Needle bearings provide size consistency and proper hardness for even load distribution. Snap rings are held to strict tolerances to ensure proper cup position and retention.
  • Nitrile rubber grease seals use a compressed double lip design to ensure more effective protection from contaminants and are purgable for longer life. Seals utilize stringent multifaceted SAE performance standards to ensure consistently high quality.
  • See more on Amazon...

Brand: Moog   |   Manufacturer: Federal Mogul

Item Dimensions: 2.63 x 4.5 x 9.75 inches (6.7 x 11.4 x 24.8 cm)   |   Package Dimensions: 2.7 x 4.7 x 10.7 inches (6.9 x 11.9 x 27.2 cm)

Amazon Price: $65.99 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $67.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

ACDelco 46C1123A Advantage Idler Link Arm

Model: 46C1123A   |    Mpn: 46C1123A   |    Ean: 0707773924174   |    PartNumber: 46C1123A   |   Asin: B006N971BS

ACDelco Advantage Steering Idler Arms support the steering linkage of your vehicle, working with the pitman arm to allow the center link to move your tie rods and steer your vehicle s wheels. These replacement components contain a hot-forged steel arm, metal-on-metal or full synthetic polymer bearings, and full-ball studs for durability and high-quality performance. ACDelco Steering Idler Arms also contain plated castle nuts and hardware where needed. ACDelco Advantage Steering Idler Arms offer quality at an economical price.

Features

  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • Coated for corrosion resistance and long life
  • Greaseable design where applicable for easy maintenance and longevity
  • Precision-machined arm, housing, and socket end for better fit and performance
  • Dust boot is re-installed and permanently attached to reduce contamination and increase durability and service life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 3 x 3.9 x 10.6 inches (7.6 x 9.9 x 26.9 cm)   |   Package Dimensions: 3.3 x 4.3 x 12 inches (8.4 x 10.9 x 30.5 cm)

Amazon Price: $19.87 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $32.27 | Used Price: $28.82

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Moog K6723 Idler Arm Bracket

Model: K6723   |    Mpn: K6723   |    Ean: 0080066328737   |    PartNumber: K6723   |   Asin: B00180FSLM

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver design includes an exclusive grease fitting extension hose that relocates the idler arm grease fitting to the sway bar frame bracket. Routine service is easy, as the zerk is now accessible through the wheel well.
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Problem Solver patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
  • One piece housing is forged from premium material and heat treated for strength and durability.
  • Service no longer requires removal of the skid plate.
  • Premium polychloroprene sealed boot includes grease relief valve to keep contaminants out.
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.7 x 4.5 x 9.8 inches (6.9 x 11.4 x 24.9 cm)   |   Package Dimensions: 2.9 x 4.7 x 9.9 inches (7.4 x 11.9 x 25.1 cm)

First Available: 2015-10-30

Amazon Price: $56.21 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $57.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

ACDelco 45C1123 Professional Idler Link Arm

Model: 45C1123   |    Mpn: 45C1123   |    Ean: 0707773056639   |    PartNumber: 45C1123   |   Asin: B000JZYWUK

ACDelco Professional Idler Link Arms are the supporting pivot point to your vehicle s steering linkage, and are a high-quality replacement ideal for many vehicles on the road today. These arms help turn your vehicle s front wheels in reaction to the steering wheel while driving. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Features

  • Helps turn your vehicle's wheels in reaction to your steering wheel
  • Coated with a corrosion resistant material
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 3 x 4 x 10.7 inches (7.6 x 10.2 x 27.2 cm)   |   Package Dimensions: 2.8 x 3.6 x 10.6 inches (7.1 x 9.1 x 26.9 cm)

Amazon Price: $53.98 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $57.79 | Used Price: $51.09

Warranty: Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

ACDelco 46C1120A Advantage Idler Link Arm

Model: 46C1120A   |    Mpn: 46C1120A   |    Ean: 0707773925782   |    PartNumber: 46C1120A   |   Asin: B006N9I31U

ACDelco Advantage Steering Idler Arms serve as pivot points for the steering linkage assemblies in your vehicle, are economical replacement components for your GM and non-GM vehicle. These arms attach on the opposite side of the center link from the pitman arm and to the vehicle frame, supporting the center link. These dependable aftermarket steering idler arms offer quality and performance, all at an economical price.

Features

  • Forged arm for enhanced strength
  • Bearing design reduces endplay
  • Undergo extreme impact, wear, and fatigue testing to help ensure quality and durability
  • Studs use cold-formed manufacturing to maintain very close tolerances
  • Greaseable design for long life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 3 x 3.9 x 10.6 inches (7.6 x 9.9 x 26.9 cm)   |   Package Dimensions: 2.8 x 3.8 x 10.2 inches (7.1 x 9.7 x 25.9 cm)

Amazon Price: $13.99 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $25.87 | Used Price: $21.04

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Moog K6534 Idler Arm

Model: K6534   |    Mpn: K6534   |    Ean: 0080066279688   |    PartNumber: K6534   |   Asin: B000C543B0

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1999 GM light trucks
  • Use on 4-wheel drive vehicles
  • Designed as stock replacement
  • Improves chassis performance and durability
  • Easy to install
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 1.5 x 2.4 x 2.7 inches (3.8 x 6.1 x 6.9 cm)   |   Package Dimensions: 2.68 x 4.57 x 10.08 inches (6.8 x 11.6 x 25.6 cm)

Amazon Price: $50.69 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $56.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

MOOG Chassis Products MOOG K6535HD Idler Arm

Model: K6535HD   |    Mpn: K6535HD   |    Ean: 0080066032177   |    PartNumber: K6535HD   |   Asin: B0793C7N2X

The MOOG #K6535HD idler arm features a Double Taper Bearing and internal take-up spring to absorb shock and vibration for smoother movement. MOOG Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Features

  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Grease able socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Moog

Package Dimensions: 3 x 4.5 x 10 inches (7.6 x 11.4 x 25.4 cm)

First Available: 2018-01-18

Amazon Price: $67.19 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $68.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

ACDelco 46C1082A Advantage Idler Link Arm

Model: 46C1082A   |    Mpn: 46C1082A   |    Ean: 0707773924143   |    PartNumber: 46C1082A   |   Asin: B006N96ZJW

ACDelco Advantage Steering Idler Arms serve as pivot points for the steering linkage assemblies in your vehicle, are economical replacement components for your GM and non-GM vehicle. These arms attach on the opposite side of the center link from the pitman arm and to the vehicle frame, supporting the center link. These dependable aftermarket steering idler arms offer quality and performance, all at an economical price.

Features

  • Forged arm for enhanced strength
  • Bearing design reduces endplay
  • Undergo extreme impact, wear, and fatigue testing to help ensure quality and durability
  • Studs use cold-formed manufacturing to maintain very close tolerances
  • Greaseable design for long life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 2.9 x 8.5 x 11.6 inches (7.4 x 21.6 x 29.5 cm)   |   Package Dimensions: 2.7 x 7.8 x 11.2 inches (6.9 x 19.8 x 28.4 cm)

Amazon Price: $11.12 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $18.41

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Moog K6483T Idler Arm

Model: K6483T   |    Mpn: K6483T   |    Ean: 0080066271798   |    PartNumber: K6483T   |   Asin: B000C59YAU

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver super duty design includes frame bracket and powdered metal gusher bearing that enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Double taper bearing design prevents potential movement in the bracket pivot.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1988 - 1992 GM trucks
  • Use on both 2 and 4-wheel drive vehicles
  • Easy to install
  • Greasable arms
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.63 x 8.13 x 10.5 inches (6.7 x 20.7 x 26.7 cm)   |   Package Dimensions: 2.9 x 8.1 x 10.5 inches (7.4 x 20.6 x 26.7 cm)

First Available: 2015-10-30

Amazon Price: $52.22 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $73.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Moog K6535 Idler Arm

Model: K6535   |    Mpn: K6535   |    Ean: 0080066279664   |    PartNumber: K6535   |   Asin: B000C59Y8M

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1999 GM heavy duty trucks
  • Designed as stock replacement
  • Improves chassis performance and durability
  • Easy to install
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.7 x 4.6 x 9.9 inches (6.9 x 11.7 x 25.1 cm)   |   Package Dimensions: 2.6 x 4.88 x 10.87 inches (6.6 x 12.4 x 27.6 cm)

Amazon Price: $59.67 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $59.79 | Used Price: $55.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

PartsW 3 Piece Front Steering Kit Idler Arm, Pitman Arm 4 Grooves and Idler Arm Bracket Assembly 4WD Only

 Ean: 0882779653508   |    PartNumber: PW0687   |   Asin: B019FXG8VC

Auto parts are vital to every vehicle. It is essential for every automobile in the world to carry high quality parts; not only to run, but to safely transport families and individuals throughout their daily routines and adventures. We want our customers to forget about any other issues once they install our parts; this is why our replacement parts are designed to match and fit without any issues. Our quality control team makes sure only high strength materials are used in our manufacturing process. At PartsW , we are proud to offer premium brand quality auto parts at a fair price to our customers.

US Warehouse: FREE Faster Delivery to the lower 48 states (about 2-5 business days)

Package Includes: 1 Idler Arm 1 Pitman Arm W/4 Grooves 1 Idler Arm Assembly

This Kit Fits: CADILLAC Escalade / Escalade ESV / Escalade EXT CHEVROLET Avalanche 1500 / Express 2500 / Express 3500 CHEVROLET Silverado 1500 / Silverado 1500 Classic CHEVROLET Suburban 1500 / Tahoe / GMC Savana 2500 / Savana 3500 / Sierra 1500 / Sierra 1500 Classic GMC Yukon / Yukon XL 1500 HUMMER H2

Important Note: -Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner. Fitment information provided is for reference only. -PartsW s / Premium Quality, Service & Experience. Click on PartsW and look at our feedback.

Features

  • IMPORTANT NOTE: PITMAN ARM WITH 4 GROOVES
  • Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength
  • Greaseable design where applicable, for easy maintenance and longevity
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
  • See more on Amazon...

Brand: Parts Warehouse   |   Manufacturer: Parts W

Amazon Price: $51.40 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $66.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Cognito Pitman & Idler Arm Support Kit 1500/2500/3500 HD, Hummer H2 PISK2008

Model: PISK2008   |    Mpn: 110-90247   |    Ean: 0763985952572   |    PartNumber: 110-90247   |   Asin: B00UO1MBBQ

Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks & SUVs for decades. The Cognito PISK (Pitman & Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of GM trucks & SUVs. These improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicles pitman and idler arms, which eliminate the forward and rearward movement of the center-link. *Kit includes all necessary mounting hardware. Made in the USA. NOTE: Only for use on stock height or lifted vehicles with the factory center-link in the stock location.

Features

  • 2001-2010 Chevrolet and GMC 1500HD / 2500 / 2500HD / 3500 / 3500HD 2WD/4WD Trucks
  • 2001-2013 2500 2WD/4WD SUVs and 2003-2009 Hummer H2 and H2 SUVs.
  • Greatly improves handling
  • Reduces lane wandering and driver fatigue
  • Increases steering component and tire life
  • See more on Amazon...

Brand: Cognito   |   Manufacturer: Cognito

Package Dimensions: 4.5 x 4.6 x 8.2 inches (11.4 x 11.7 x 20.8 cm)

Amazon Price: $228.00 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $228.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ACDelco 46C1102A Advantage Idler Link Arm

Model: 46C1102A   |    Mpn: 46C1102A   |    Ean: 0707773924150   |    PartNumber: 46C1102A   |   Asin: B006N97064

ACDelco Advantage Steering Idler Arms serve as pivot points for the steering linkage assemblies in your vehicle, are economical replacement components for your GM and non-GM vehicle. These arms attach on the opposite side of the center link from the pitman arm and to the vehicle frame, supporting the center link. These dependable aftermarket steering idler arms offer quality and performance, all at an economical price.

Features

  • Forged arm for enhanced strength
  • Bearing design reduces endplay
  • Undergo extreme impact, wear, and fatigue testing to help ensure quality and durability
  • Studs use cold-formed manufacturing to maintain very close tolerances
  • Greaseable design for long life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 2.9 x 8.5 x 11.6 inches (7.4 x 21.6 x 29.5 cm)   |   Package Dimensions: 2.7 x 8.4 x 11 inches (6.9 x 21.3 x 27.9 cm)

Amazon Price: $18.90 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $18.90 | Used Price: $6.20

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

PartsW 3 Piece Steering Kit Idler Arm Pitman Arm With 4 Grooves Idler Arm Bracket Assembly for Cadillac Chevrolet and GMC

 Ean: 0732943441632   |    PartNumber: PW0687P   |   Asin: B071JGZN36

Auto parts are vital to every vehicle. It is essential for every automobile in the world to carry high quality parts; not only to run, but to safely transport families and individuals throughout their daily routines and adventures. We want our customers to forget about any other issues once they install our parts; this is why our replacement parts are designed to match and fit without any issues. Our quality control team makes sure only high strength materials are used in our manufacturing process. At PartsW, we are proud to offer premium brand quality auto parts at a fair price to our customers. Amazon Warehouse: Prime Delivery to the lower 48 states (2 business days) Package Includes: 1 Idler Arm 1 Pitman Arm W/4 Grooves 1 Idler Arm Assembly This Kit Fits: CADILLAC Escalade / Escalade ESV / Escalade EXT CHEVROLET Avalanche 1500 / Express 2500 / Express 3500 CHEVROLET Silverado 1500 / Silverado 1500 Classic CHEVROLET Suburban 1500 / Tahoe GMC Savana 2500 / Savana 3500 / Sierra 1500 / Sierra 1500 Classic GMC Yukon / Yukon XL 1500 HUMMER H2 Important Note: -Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner. Fitment information provided is for reference only. -PartsW s / Premium Quality, Service & Experience. Click on PartsW and look at our feedback.

Features

  • Important Note: Only Models w/ Power Steering Gear Box and Pitman Arm With 4 Grooves
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • Greaseable design where applicable, for easy maintenance and longevity
  • Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
  • Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength
  • See more on Amazon...

Brand: Parts Warehouse   |   Manufacturer: PartsW

Package Dimensions: 5 x 5 x 9 inches (12.7 x 12.7 x 22.9 cm)

Amazon Price: $49.69 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $49.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Moog K6187T Idler Arm

Model: K6187T   |    Mpn: K6187T   |    Ean: 0080066271705   |    PartNumber: K6187T   |   Asin: B000C59Y3M

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Use on 1978 - 1990 GM vehicles
  • Greaseable for smoother steering
  • Use on rear wheel drive cars
  • Easy to install
  • Designed as stock replacement
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 1.2 x 2.9 x 4.2 inches (3.0 x 7.4 x 10.7 cm)   |   Package Dimensions: 2.1 x 7.5 x 10.6 inches (5.3 x 19.1 x 26.9 cm)

Amazon Price: $23.79 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $34.72

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

ACDelco 46C1042A Advantage Idler Link Arm

Model: 46C1042A   |    Mpn: 46C1042A   |    Ean: 0707773924136   |    PartNumber: 46C1042A   |   Asin: B006N96YZC

ACDelco Advantage Steering Idler Arms serve as pivot points for the steering linkage assemblies in your vehicle, are economical replacement components for your GM and non-GM vehicle. These arms attach on the opposite side of the center link from the pitman arm and to the vehicle frame, supporting the center link. These dependable aftermarket steering idler arms offer quality and performance, all at an economical price.

Features

  • Forged arm for enhanced strength
  • Bearing design reduces endplay
  • Undergo extreme impact, wear, and fatigue testing to help ensure quality and durability
  • Studs use cold-formed manufacturing to maintain very close tolerances
  • Greaseable design for long life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 2.9 x 8.5 x 11.6 inches (7.4 x 21.6 x 29.5 cm)   |   Package Dimensions: 2.6 x 8.3 x 11.1 inches (6.6 x 21.1 x 28.2 cm)

Amazon Price: $18.69 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $21.98

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Moog K8118 Idler Arm

Model: K8118   |    Mpn: K8118   |    Ean: 0080066119090   |    PartNumber: K8118   |   Asin: B000C55ZWG

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1965 - 1974 Ford vehicles
  • Designed as stock replacement
  • Improves chassis performance and durability
  • Easy to install
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.63 x 3.5 x 9.75 inches (6.7 x 8.9 x 24.8 cm)   |   Package Dimensions: 2.8 x 3.6 x 9.8 inches (7.1 x 9.1 x 24.9 cm)

Amazon Price: $41.37 | as of 08/20/2019(7:48am pst)
Availibility:
List Price: $64.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Proforged 102-10026 Greasable Idler Arm - RWD

Model: 102-10026   |    Mpn: 102-10026   |    Ean: 0849180003896   |    PartNumber: 102-10026   |   Asin: B008VQMS46

The Idler Arm and Pitman Arm are two of the most commonly worn steering components. Poorly designed wearable joints from the factory quickly loosen and cause excessive play in the steering. Proforged Idler Arms and Pitman Arms are built to strict tolerances using the latest innovations in steering technology, ensuring crisp, predictable handling.

Features

  • 1,000,000 MILE WARRANTY. You can install our idler arms with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG IDLER ARMS. Proforged idler arms are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged products - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance idler arms: Proforged.
  • WHAT IS AN IDLER ARM? A idler arm is part of your vehicle's steering system - it connects to your center link for support, pivoting as your wheels turn. Idler arms have a wearable joint, just like your hip, and needs to be replaced as it wears out. A worn idler arm causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn idler arm gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Item Dimensions: 2.1 x 3.8 x 9.2 inches (5.3 x 9.7 x 23.4 cm)   |   Package Dimensions: 0.8 x 2.7 x 8 inches (2.0 x 6.9 x 20.3 cm)

First Available: 2012-08-08

Amazon Price: $55.16 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $55.16

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ACDelco 46C1107A Advantage Idler Link Arm

Model: 46C1107A   |    Mpn: 46C1107A   |    Ean: 0707773923610   |    PartNumber: 46C1107A   |   Asin: B006N94CLA

ACDelco Advantage Steering Idler Arms serve as pivot points for the steering linkage assemblies in your vehicle, are economical replacement components for your GM and non-GM vehicle. These arms attach on the opposite side of the center link from the pitman arm and to the vehicle frame, supporting the center link. These dependable aftermarket steering idler arms offer quality and performance, all at an economical price.

Features

  • Forged arm for enhanced strength
  • Bearing design reduces endplay
  • Undergo extreme impact, wear, and fatigue testing to help ensure quality and durability
  • Studs use cold-formed manufacturing to maintain very close tolerances
  • Greaseable design for long life
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 2.9 x 8.5 x 11.6 inches (7.4 x 21.6 x 29.5 cm)   |   Package Dimensions: 2.9 x 8.3 x 11 inches (7.4 x 21.1 x 27.9 cm)

Amazon Price: $40.74 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $45.68

Warranty: 12 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Moog K6447 Idler Arm

Model: K6447   |    Mpn: K6447   |    Ean: 0080066418698   |    PartNumber: K6447   |   Asin: B000C59Y8C

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver design utilizes a tapered stud to increase stud to bearing contact area by 35%.
  • Increased bearing surface design combined with a controlled preload and pressure plate allows for extra durability.
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Use on 1993 - 1996 GM trucks
  • Use on 2 and 4-wheel drive vehicles
  • Designed as stock replacement
  • Improves chassis performance and durability
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.7 x 3.5 x 9.8 inches (6.9 x 8.9 x 24.9 cm)   |   Package Dimensions: 2.7 x 3.5 x 9.8 inches (6.9 x 8.9 x 24.9 cm)

Amazon Price: $36.64 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $43.58 | Used Price: $29.66

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Moog K6390 Idler Arm

Model: K6390   |    Mpn: K6390   |    Ean: 0080066405582   |    PartNumber: K6390   |   Asin: B000C55YVS

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Problem Solver design includes frame bracket and powdered metal gusher bearing that enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1988 - 1992 GM trucks
  • Easy to install
  • Improves chassis performance and durability
  • Designed as stock replacement
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 2.8 x 8.1 x 10.5 inches (7.1 x 20.6 x 26.7 cm)   |   Package Dimensions: 2.6 x 8.1 x 10.6 inches (6.6 x 20.6 x 26.9 cm)

Amazon Price: $58.79 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $61.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Moog K80536 Idler Arm

Model: K80536   |    Mpn: K80536   |    Ean: 0080066332437   |    PartNumber: K80536   |   Asin: B00180I2XS

Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.

Features

  • Moog engineered steel composition results in a stronger component
  • Sealed boot keeps the internal components free from contamination.
  • Loose or worn chassis parts can lead to premature tire wear
  • See more on Amazon...

Brand: MOOG Chassis Products   |   Manufacturer: Federal Mogul

Item Dimensions: 3.25 x 9.63 x 15.13 inches (8.3 x 24.5 x 38.4 cm)   |   Package Dimensions: 3.3 x 9.4 x 15.1 inches (8.4 x 23.9 x 38.4 cm)

First Available: 2015-10-07

Amazon Price: $57.79 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $63.78 | Used Price: $22.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Detroit Axle - 2PC Front Pitman Arm and Idler Arm Kit for 1995 1996 1997 1998 1999 2000 2001 2002 Ford Crown Victoria/Lincoln Town Car/Mercury Grand Marquis

 PartNumber: 2S1900600   |   Asin: B07SJGS2DL

1x Front Steering Pitman Arm - K8688 1x Front Steering Idler Arm - K8283 Fitment:

1995-2002 Ford Crown Victoria 1995-2002 Lincoln Town Car 1995-2002 Mercury Grand Marquis
Detroit Axle suspension components are manufactured to exceed original equipment standards and provide a better riding vehicle. We are a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.

Features

  • For - 1995-2002 Ford Crown Victoria - [1995-2002 Lincoln Town Car] - 1995-2002 Mercury Grand Marquis
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks and SUVs
  • Please check the compatibility and the view notes before purchasing the item, make sure it fits your vehicle
  • 10-Year Warranty
  • See more on Amazon...

Brand: Detroit Axle   |   Manufacturer: Detroit Axle

Item Dimensions: 12 x 8 x 18 inches (30.5 x 20.3 x 45.7 cm)   |   

Amazon Price: $33.40 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $33.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Moog K8739T Idler Arm (Renewed)

 Ean: 0683332308817   |    PartNumber: K8739T-cr   |   Asin: B07SMWLFRC

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Use on 1997 - 1999 Ford trucks
  • Designed as stock replacement
  • Improves chassis performance and durability
  • Easy to install
  • See more on Amazon...

Brand: Moog   |   Manufacturer: Federal Mogul

Item Dimensions: 4.3 x 7.6 x 14.6 inches (10.9 x 19.3 x 37.1 cm)   |   Package Dimensions: 4.5 x 7.6 x 14.8 inches (11.4 x 19.3 x 37.6 cm)

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Kryptonite Death Grip Idler Support Compatible with 1999-2010 Chevy/GMC 2500HD 3500HD KR175

 Ean: 0797132132845   |    PartNumber: KR175   |   Asin: B07TLC2GXR

KRYPTONITE DEATH GRIP IDLER SUPPORT

Fits 1999-2010 GM Heavy Duty Truck 2500HD/3500 and 1999-2006 GM 1/2 Ton Truck Silverado, Sierra, Suburban, Tahoe, Avalanche, Hummer H2 plue More.

Engineered exclusively for the Extreme demands of the Heavy Duty GM Truck. Built with pride in the USA to work with stock or modified suspension. Using superior components and engineering, our Kryptonite Idler Support Bracket easily outperforms the competition.

The idler pivot assembly tends to wear out, bend, and even break under stress with as little as 35 tires. The idler pivot assembly is what the idler arm is mounted to, and pivots on. This Extreme Duty Idler Pivot assembly has tapered roller bearings, adding strength and durability, thus creating a solid pivot point for your steering components. This kit is highly recommended. Play in the idler pivot can cause major tie rod issues. If the idler pivot assembly has an issue, the idler arm is able to move uncontrollably. As this happens you will have drastic tie rod angle changes. In certain instances a bent or failed part can cause complete disaster to your front end. Some damages may include: idler arm rubbing the transmission oil cooler lines or motor mount, pitman arm, idler arm, and tie rod breakage. Most tie rod problems stem from worn or damaged pitman and idler arms or idler pivot assembly.

Features

  • 1 x KRYPTONITE DEATH GRIP IDLER SUPPORT / 1 x Installation Hardware and Instructions
  • Reduces Steering Play
  • Improves Steering Control
  • Cuts Down Driver Fatigue
  • Provides For Safer Driving
  • See more on Amazon...

Brand: Kryptonite Products   |   Manufacturer: Kryptonite Products

Package Dimensions: 3.15 x 5.75 x 10.35 inches (8.0 x 14.6 x 26.3 cm)

Amazon Price: $180.49 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $180.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Kryptonite Death Grip Idler Side Package Compatible with 2011-2019 Chevy/GMC 2500HD 3500HD KRISP11

 Ean: 0797132132692   |    PartNumber: KRISP11   |   Asin: B07TKDRB7W

Most of the play in the steering system on Heavy Duty GM Trucks is on the Idler side, this package will decrease play in the Idler side and solidify your steering feel. This combination of parts will bullet proof you idler side steering.

The Kryptonite steering Death Grip Idler Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing new Idler arm utilizes a sealed double roller bearing system that requires no maintenance and is backed with our lifetime warranty. This idler can be used with lifted, leveled or lowered suspension. The Death Grip idler can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 2011-2019 Chevrolet or GMC 2500/3500 HD. This design will work with PISK3008 brace kit.

Idler Arm Benefits:

Housing machined from solid piece billet steel Heat treated 4140 Chromoly stud Dual sealed roller bearings Made in the USA Idler Support benefits:

Reduces Steering Play Improves Steering Control Cuts Down Driver Fatigue Provides For Safer Driving Made In the USA Frame Gusset Benefits:

Constructed of 1/4" Plate Steel Made In the USA

Features

  • 1 x Kryptonite Death Grip Idler Arm
  • 1 x Kryptonite Idler Support
  • 1 x Kryptonite Idler Support Frame Gusset
  • Housing machined from solid piece billet steel
  • Heat treated 4140 Chromoly stud
  • See more on Amazon...

Brand: Kryptonite Products   |   Manufacturer: Kryptonite Products

Package Dimensions: 6.5 x 10 x 10.5 inches (16.5 x 25.4 x 26.7 cm)

Amazon Price: $522.49 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $522.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Kryptonite Death Grip Idler Arm Comaptible with 2001-2010 Chevy/GMC 2500HD 3500HD 10KDG535

 Ean: 0797132132821   |    PartNumber: 10KDG535   |   Asin: B07TLF9TC2

Fits: 2001-2010 Chevy/GMC 1500HD/2500HD/3500 GM Trucks

If you demand the absolute best for your truck this is it.



The Kryptonite steering Death Grip Idler Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing Idler arm utilizes a sealed double roller bearing system that requires no maintenance and is backed with our lifetime warranty. This idler arm can be used with lifted, leveled or lowered suspension. The Death Grip idler can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 1999-2010 Chevrolet or GMC 2500/3500 HD. This Design will work with PISK2008 brace kit:

(Kryptonite No Fine Print Lifetime warranty ) Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don t care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer to have warranty coverage.

Features

  • Heat treated 4140 Chromoly Stud
  • Dual sealed roller bearings
  • Works with PISK kit
  • Lifetime warranty
  • See more on Amazon...

Brand: Kryptonite Products   |   Manufacturer: Kryptonite Products

Item Dimensions: 3 x 5 x 10 inches (7.6 x 12.7 x 25.4 cm)   |   Package Dimensions: 3 x 5 x 10 inches (7.6 x 12.7 x 25.4 cm)

Amazon Price: $284.99 | as of 08/20/2019(7:48am pst)
Availibility:
List Price: $284.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Moog K6534 Idler Arm (Renewed)

 Ean: 0766234464291   |    PartNumber: K6534-cr   |   Asin: B07SSXCNCP

Features

  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Moog engineered steel composition results in a stronger component
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Loose or worn chassis parts can lead to premature tire wear
  • Fits 1999 GM light trucks
  • Use on 4-wheel drive vehicles
  • Designed as stock replacement
  • Improves chassis performance and durability
  • Easy to install
  • See more on Amazon...

Brand: Moog   |   Manufacturer: Federal Mogul

Item Dimensions: 1.5 x 2.4 x 2.7 inches (3.8 x 6.1 x 6.9 cm)   |   

Amazon Price: $49.68 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $49.68

Warranty: 90 days limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Kryptonite Death Grip Idler Arm Compatible with 2011-2019 Chevy/GMC 2500HD 3500HD 11KDG018

 Ean: 0797132132685   |    PartNumber: 11KDG018   |   Asin: B07TLF6L7T

If you demand the absolute best for your truck this is it!

Details:

Housing CNC machined from solid billet steel Heat treated 4140 chromoly stud Dual sealed roller bearings Made in the USA Works with PISK kit

The Kryptonite steering Death Grip Idler Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing Idler arm utilizes a sealed double roller bearing system that requires no maintenance and is backed with our lifetime warranty. This idler arm can be used with lifted, leveled or lowered suspension. The Death Grip idler can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 2011-Current Chevrolet or GMC 2500/3500 HD. This design will work with PISK3008 brace kit.

(Kryptonite No Fine Print Lifetime warranty ) Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don t care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer to have warranty coverage.

Features

  • Housing CNC machined from solid billet steel
  • Heat treated 4140 chromoly stud
  • Dual sealed roller bearings
  • Made in the USA
  • Works with PISK kit
  • See more on Amazon...

Brand: Kryptonite Products   |   Manufacturer: Kryptonite Products

Amazon Price: $284.99 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $284.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Detroit Axle - New Front Steering Idler Arm Heavy Duty for Chevrolet Chevy GMC Blazer C1500 C2500 K1500 K2500 C3500 K3500 Suburban

 PartNumber: K6390   |   Asin: B07TJR253F

1x Brand New Steering Idler Arm - K6390 Fitment: 1992 Chevrolet Blazer (4WD) 1988-1992 Chevrolet C1500 1992 Chevrolet C1500 Suburban 1988-1992 Chevrolet C2500 1992 Chevrolet C2500 Suburban 1988-1992 Chevrolet C3500 1988-1992 Chevrolet K1500 1992 Chevrolet K1500 Suburban 1988-1992 Chevrolet K2500 1992 Chevrolet K2500 Suburban 1988-1992 GMC C1500 1992 GMC C1500 Suburban 1988-1992 GMC C2500 1992 GMC C2500 Suburban 1988-1992 GMC C3500 1988-1992 GMC K1500 1992 GMC K1500 Suburban 1988-1992 GMC K2500 1992 GMC K2500 Suburban 1988-1992 GMC K3500 1992 GMC Yukon (4WD) Detroit Axle Suspension components are manufactured to exceed original equipment standards and provide a better riding vehicle. We are a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket.

Features

  • For - 1992 Chevrolet Blazer (4WD) - [1988-1992 Chevrolet C1500] - 1992 Chevrolet C1500 Suburban - [1988-1992 Chevrolet C2500] - 1992 Chevrolet C2500 Suburban - [1988-1992 Chevrolet C3500] - 1988-1992 Chevrolet K1500 - [1992 Chevrolet K1500 Suburban] - 1988-1992 Chevrolet K2500 - [1992 Chevrolet K2500 Suburban]
  • For - 1988-1992 GMC C1500 - [1992 GMC C1500 Suburban] - 1988-1992 GMC C2500 - [1992 GMC C2500 Suburban] - 1988-1992 GMC C3500 - [1988-1992 GMC K1500] - 1992 GMC K1500 Suburban - [1988-1992 GMC K2500] - 1992 GMC K2500 Suburban - [1988-1992 GMC K3500] - 1992 GMC Yukon (4WD)
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks and SUVs
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality
  • See more on Amazon...

Brand: Detroit Axle   |   Manufacturer: Detroit Axle

Item Dimensions: 7 x 3 x 9 inches (17.8 x 7.6 x 22.9 cm)   |   

Amazon Price: $23.40 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 24 hours
List Price: $23.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

for 1964-79 Idler Arm Bolts Judge SS W30 GSX GS Z28 Trans Am Quick Delivery

 Ean: 0041121022748   |    PartNumber: 146-190533410oneq   |   Asin: B07T2FTHLY

64-72 Chevelle, GTO, 442, GS / 67-79 Camaro, Firebird / 68-79 Nova, Ventura. Front Suspension Idler Arm Bolts 6pc.

Features

  • 64-72 Chevelle, GTO, 442, GS / 67-79 Camaro, Firebird / 68-79 Nova, Ventura. Front Suspension Idler Arm Bolts 6pc.
  • These are the bolts, special washer and lock nuts that hold the idler arm to the frame. This is exact factory harware featuring TR bolts.
  • See more on Amazon...

Brand: $/Reliable   |   Manufacturer: $/Quality

Amazon Price: $16.16 | as of 08/20/2019(7:48am pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Detroit Axle - 2PC Front Pitman Arm and Idler Arm Kit for 1995 1996 1997 1998 1999 2000 2001 2002 Fo...
  2. Moog K8739T Idler Arm (Renewed)
  3. Kryptonite Death Grip Idler Support Compatible with 1999-2010 Chevy/GMC 2500HD 3500HD KR175
  4. Kryptonite Death Grip Idler Side Package Compatible with 2011-2019 Chevy/GMC 2500HD 3500HD KRISP11
  5. Kryptonite Death Grip Idler Arm Comaptible with 2001-2010 Chevy/GMC 2500HD 3500HD 10KDG535
  6. Moog K6534 Idler Arm (Renewed)
  7. Kryptonite Death Grip Idler Arm Compatible with 2011-2019 Chevy/GMC 2500HD 3500HD 11KDG018
  8. Detroit Axle - New Front Steering Idler Arm Heavy Duty for Chevrolet Chevy GMC Blazer C1500 C2500 K1...
  9. for 1964-79 Idler Arm Bolts Judge SS W30 GSX GS Z28 Trans Am Quick Delivery

Most Wished For

  1. Moog K6723 Idler Arm Bracket
  2. PartsW 3 Piece Front Steering Kit Idler Arm, Pitman Arm 4 Grooves and Idler Arm Bracket Assembly 4WD...
  3. MOOG K6535HD Steering Idler Arm
  4. Cognito Pitman & Idler Arm Support Kit 1500/2500/3500 HD, Hummer H2 PISK2008
  5. Moog K6534 Idler Arm
  6. ACDelco 45C1123 Professional Idler Link Arm
  7. ACDelco 46C1082A Advantage Idler Link Arm
  8. ACDelco 46C1123A Advantage Idler Link Arm
  9. ACDelco 46C1102A Advantage Idler Link Arm
  10. PartsW 3 Piece Steering Kit Idler Arm Pitman Arm With 4 Grooves Idler Arm Bracket Assembly for Cadil...

Most Gifted

  1. Moog K6187T Idler Arm
  2. ACDelco 46C1042A Advantage Idler Link Arm
  3. Moog K8118 Idler Arm
  4. Proforged 102-10026 Greasable Idler Arm - RWD
  5. ACDelco 46C1107A Advantage Idler Link Arm
  6. Moog K6447 Idler Arm
  7. Moog K6390 Idler Arm
  8. Moog K80536 Idler Arm
  9. Moog K6723 Idler Arm Bracket
  10. ACDelco 46C1102A Advantage Idler Link Arm

Top Selling

  1. MOOG K6535HD Steering Idler Arm
  2. ACDelco 46C1123A Advantage Idler Link Arm
  3. Moog K6723 Idler Arm Bracket
  4. ACDelco 45C1123 Professional Idler Link Arm
  5. ACDelco 46C1120A Advantage Idler Link Arm
  6. Moog K6534 Idler Arm
  7. MOOG Chassis Products MOOG K6535HD Idler Arm
  8. ACDelco 46C1082A Advantage Idler Link Arm
  9. Moog K6483T Idler Arm
  10. Moog K6535 Idler Arm



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts