Frontpage > Car & Automotive > Replacement Parts > Intake Manifolds & Parts

Best Intake Manifolds & Parts - Buying Guide

Last Updated: 11/12/2018

Share on


  #1

Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln / Mercury Models

Model: 615-175   |    Mpn: 615175   |    Ean: 0019495033929   |    PartNumber: 615175   |   Asin: B000CIXMIC

More like a complete service kit than a single part. Dorman s Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Features

  • DIRECT REPLACEMENT: This Dorman upper intake manifold is specifically engineered to match the original design and performance of the original intake manifold on select Ford Crown Victoria, Ford Explorer, Ford Mustang, Lincoln Town Car, Mercury Grand Marquis and Mercury Mountaineer vehicles.
  • COMPLETE PACKAGE: Includes thermostat, O-ring, bolts, nuts and threaded metal plug.
  • GREATER DURABILITY: Re-engineered by Dorman with heat-resistant polymers to reduce warping and coolant leaks.
  • REINFORCED MATERIALS: Features an aluminum coolant crossover that reduces corrosion and vibration
  • EASIER INSTALLATION: Torque specifications AND bolt tightening sequence are provided.
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman - OE Solutions

Item Dimensions: 10.1 x 16.3 x 20.1 inches (25.7 x 41.4 x 51.1 cm)   |   Package Dimensions: 10.4 x 17.3 x 19.8 inches (26.4 x 43.9 x 50.3 cm)

Amazon Price: Too low to display | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $166.95

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

New Inline Fuel Shut Off Valve Petcock Dirt Bike Go Kart ATV

 PartNumber: J8LJ3O6   |   Asin: B00J8LJ3O6

Features

Brand: DKiigame

Package Dimensions: 0.6 x 3 x 3.2 inches (1.5 x 7.6 x 8.1 cm)

Amazon Price: $4.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

EMPI 3230 Dual Port Installation Kit with Intake Gaskets Intake Boots and Intake Clamps VW Dune Buggy Bug Ghia Thing Trike Baja Bus Sand Rail

 Ean: 0707924305685   |    PartNumber: 00-3229-0   |   Asin: B0046VQANU

Dual port installation kit for stock type manifolds includes intake gaskets clamps and boots. Made of urethane Engine: Type 1 2 & 3 1500-1600 Dual Port DUAL PORT INTAKE INSTALLATION

Features

Brand: Empi   |   Manufacturer: EMPI

Package Dimensions: 1.4 x 5.9 x 8 inches (3.6 x 15.0 x 20.3 cm)

Amazon Price: $9.58 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

APDTY 022013 Intake Manifold Tuning Short Air Flow Actuator Runner Control Valve IMRC Fits 1.8L 2.0L 2.4L Sebring Avenger Caliber Journey Compass Patriot (4-Cylinder; Replaces 4884549AD)

Model: 022013   |    Mpn: 022013   |    Ean: 0401000135653   |    PartNumber: 022013   |   Asin: B00ET434RO

Brand New Intake Manifold Runner Control Valve IMRC Tuning Short Flow Actuator
Bolts To Back Of Plastic Intake Manifold
Fits 2007-2009 Chrysler Sebring w/ 4-Cylinder Engine
Fits 2007-2014 Jeep Patriot w/ 4-Cylinder Engine
Fits 2007-2014 Jeep Compass w/ 4-Cylinder Engine
Fits 2007-2012 Dodge Caliber w/ 4-Cylinder Engine
Fits 2008-2009 Dodge Avenger w/ 4-Cylinder Engine
Fits 2009-2010 Dodge Journey w/ 4-Cylinder Engine
Replaces 4884549AD

Features

  • Brand New Intake Manifold Control Tuning Short Flow Actuator Valve
  • Fits 1.8L 2.0L or 2.4L 4-Cyilnde On Models Listed In The Description
  • Helps Solve Diagnostic Trouble Code DTC P2004, P2010, P2017
  • Replaces Mopar Part Number 4884549AC, 4884549AD, 4884549AB
  • See more on Amazon...

Brand: APDTY   |   Manufacturer: APDTY

Package Dimensions: 3.5 x 4.3 x 4.3 inches (8.9 x 10.9 x 10.9 cm)

Amazon Price: $65.00 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $67.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Dorman 615-180 Intake Manifold

Model: 615-180   |    Mpn: 615180   |    Ean: 0019495033936   |    PartNumber: 615180   |   Asin: B000C17G5E

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We've earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

Features

  • Re-engineered by Dorman with heat-resistant molding to reduce both warping and coolant leaks (where applicable)
  • Some manifolds feature a reinforced aluminum coolant crossover to eliminate corrosion and vibration (where applicable)
  • Reinforced EGR and coolant passage walls increased manifold durability (where applicable)
  • Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman - OE Solutions

Item Dimensions: 7.2 x 8.5 x 20.2 inches (18.3 x 21.6 x 51.3 cm)   |   Package Dimensions: 7.1 x 8.6 x 20 inches (18.0 x 21.8 x 50.8 cm)

Amazon Price: $66.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $66.95 | Used Price: $56.85

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Dorman 03211 Exhaust Manifold Hardware Kit

Model: 3211   |    Mpn: 3211   |    Ean: 0037495036870   |    PartNumber: 3211   |   Asin: B00NF17JPK

Dorman's Exhaust Manifold Hardware Kit provides you with the proper studs, bolts, and nuts for replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Features

  • Direct replacement for a proper fit every time
  • Durable steel construction
  • Contains 4 studs, 5 bolts and 4 nuts
  • Bolt Grade: 10.9
  • Thread Size: M8-1.25
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman - HELP

Item Dimensions: 2.19 x 2.38 x 3.63 inches (5.6 x 6.0 x 9.2 cm)   |   Package Dimensions: 2 x 4 x 6.2 inches (5.1 x 10.2 x 15.7 cm)

First Available: 2015-04-24

Amazon Price: $23.89 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.89

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

ATP Automotive Graywerks 106001 Engine Intake Manifold

Model: 106001   |    Mpn: 106001   |    Ean: 0740993039457   |    PartNumber: 106001   |   Asin: B000C8T7X6

ATP's premium replacement GM 3.8l intake manifold is re-engineered to correct common failure points, and importantly, prevent repeat replacements. A metal-cert sleeve is installed in the EGR port, along with a spacer pipe that allows for heat dissipation between the tube and the port. This reduces internal heat build-up and keeps the area around the port cooler, preventing cracks. In addition to this, the manifold is constructed from a heat stabilized nylon, providing better resistance to heat and cold/hot cycles, along with additional reinforcement ribs to further prevent any chances of cracking. The full kit includes a replacement manifold, spacer pipes for early & late production engines, PCV cover, vacuum hose connector and early & late production injector O-rings.

Features

  • Re-engineered replacement manifold for GM 3.8l engines
  • Metal-cert sleeved EGR port and spacer pipe allows heat dissipation and prevents repeat failures
  • Heat stabilized nylon increases overall durability and resistance to heat
  • Structurally molded with OE specified reinforcement ribs
  • Includes spacer pipes, gasket, pcv cover, vacuum hose bracket and early & late model injector O-rings
  • See more on Amazon...

Brand: ATP Automotive   |   Manufacturer: atp automotive

Item Dimensions: 7.8 x 8.8 x 19.8 inches (19.8 x 22.4 x 50.3 cm)   |   Package Dimensions: 9 x 9.75 x 20 inches (22.9 x 24.8 x 50.8 cm)

Amazon Price: $77.78 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $78.78 | Used Price: $48.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Dorman 615-188 Upper Intake Manifold for Select Ford Trucks

Model: 615-188   |    Mpn: 615188   |    Ean: 0019495230328   |    PartNumber: 615188   |   Asin: B003QVJ79K

Dorman Upper Intake Manifold for Ford Truck - 1 Piece is a Dorman product, a line of application-specific, new-to-the-aftermarket hard parts. Dorman products are often engineered to be better than the original design. Dorman replacement parts are competitively priced. Dorman takes pride in the quality of their products and in your satisfaction with their performance.

Features

  • DIRECT REPLACEMENT: This Dorman upper intake manifold is specifically engineered to match the design and performance of the original intake manifold on select Ford E-350 Super Duty, Ford E-450 Super Duty, Ford E-150, Ford E-250, Ford Econoline, Ford F-150, Ford Expedition, Ford Excursion.
  • COMPLETE PACKAGE: Includes intake manifold, plastic fitting, thermostat, all gaskets, O-ring and self tapping screws.
  • GREATER DURABILITY: Re-engineered by Dorman with heat-resistant polymers to reduce warping and coolant leaks.
  • REINFORCED MATERIALS: Features an aluminum coolant crossover that reduces corrosion and vibration.
  • EASIER INSTALLATION: Torque specifications AND bolt tightening sequence are provided.
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman - OE Solutions

Item Dimensions: 10.8 x 17.3 x 19.6 inches (27.4 x 43.9 x 49.8 cm)   |   Package Dimensions: 10.39 x 17.01 x 19.69 inches (26.4 x 43.2 x 50.0 cm)

Amazon Price: Too low to display | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $150.86 | Used Price: $120.69

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Intake Manifold Carburetor Boot for 1999-2004 Yamaha Bear Tracker YFM250

 Ean: 0614134628902   |    PartNumber: PAB-CRRK07   |   Asin: B071HLPHCL

Description:
Give your machine the new power and torque it really deserves
REPLACES OEM NUMBER:4XE-13586-00-00,93210-35537-00,91317-06020-00,90450-49001-00
Fits:Yamaha Models 1999 - 2004 BEAR TRACKER YFM 250.

Features

  • Replaces existing damaged intake, Just replace and ride again
  • REPLACES OEM NUMBER:4XE-13586-00-00,93210-35537-00,90450-49001-00
  • Fits:Yamaha Models 1999 - 2004 BEAR TRACKER YFM 250.
  • Package includes:1x Intake boot,1x FREE O-Ring,1x FREE Clamp
  • See more on Amazon...

Brand: Pedro A Bailey   |   Manufacturer: Pedro A Bailey

Package Dimensions: 2.09 x 3.31 x 3.31 inches (5.3 x 8.4 x 8.4 cm)

Amazon Price: $18.98 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Intake Manifold w/Thermostat & Gaskets Kit for Ford Lincoln Mercury 4.6L V8

 Ean: 0191213325049   |    PartNumber: 1AEIM00012   |   Asin: B0785JN4G2

Specifications:

Reinforced aluminum coolant crossover - eliminates failure due to corrosion or vibration Re-engineered reinforced plastic Intake gaskets molded into the intake manifold Not correct for models with coolant-heated PCV Kit includes:

Complete improved intake manifold with new aluminum crossover New thermostat, o-ring, and screws Brackets for installing alternator Spacers to install original thermostat housing - making it not necessary to replace the hose and thermostat housing Installation instructions with torque specifications and tightening sequence Everything needed to do the job right the 1st time!! Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Fits:

1999-04 Ford Mustang V8 4.6L (8th Vin Digit X) Intake Manifold 2001-05 Ford Crown Victoria V8 4.6L (8th Vin Digit 9) Intake Manifold 2001-08 Ford Crown Victoria V8 4.6L (8th Vin Digit W) Intake Manifold 2001-08 Lincoln Town Car V8 4.6L (8th Vin Digit W) Intake Manifold 2001-08 Mercury Grand Marquis V8 4.6L (8th Vin Digit W) Intake Manifold 2002 Ford Explorer V8 4.6L (8th Vin Digit W) Intake Manifold 2002 Mercury Mountaineer V8 4.6L (8th Vin Digit W) Intake Manifold 2006-11 Ford Crown Victoria V8 4.6L (8th Vin Digit V) Intake Manifold 2006-11 Mercury Grand Marquis V8 4.6L (8th Vin Digit V) Intake Manifold 2007-11 Lincoln Town Car V8 4.6L (8th Vin Digit V) Intake Manifold

Features

  • 1A Auto Lifetime Warranty
  • Reference Number(s): 329-01780,3W7Z9424AD,1W7Z9424AB,3W7Z9424AA,615-175
  • See more on Amazon...

Brand: 1A Auto   |   Manufacturer: 1A Auto

Amazon Price: $130.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $130.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

A-Team Performance 102mm LS LS1 LS2 LS6 Black Intake Manifold Throttle Body Sheet Metal Fabricated Black EFI 15 THROTTLE OPENING Compatible with Chevrolet GMC Pontiac

 PartNumber: 501BK   |   Asin: B076Z97CCW

A-Team Performance 102mm LS LS1 LS2 LS6 Black Intake Manifold Throttle Body Sheet Metal Fabricated Black EFI 15 THROTTLE OPENING Compatible with Chevrolet GMC Pontiac.


100% TIG Welded Aluminum. Hardware includes 3mm (1/8") thick T6061 Sheet Aluminum construction, Black Fuel Rails, Fuel crossover line: Included -Intake is about 2" taller than stock. This intake fits cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads.


FEATURES:
Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, Fuel Crossover Line. Works on CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2)

A-Team Performance parts are sold exclusively by Southwest Performance Parts.

Features

  • COMPATIBILITY - Fits Cathedral Port LS1/LS2/LS6 heads
  • HARDWARE - 3mm (1/8) thick T6061 Sheet Aluminum construction
  • THROTTLE BODY - 102mm bore Throttle Body Openings
  • DURABILITY - The intake will not bend or flex With Boost Or Vacuum
  • FABRICATION - TIG Welded Aluminum
  • See more on Amazon...

Brand: A-Team Performance

Amazon Price: $499.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $499.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

S&B Filters 76-1006B Chevrolet GMC LLY Diesel Engine Turbo Mouthpiece

Model: 76-1006B   |    Mpn: 76-1006B   |    Ean: 0841372034909   |    PartNumber: 76-1006B   |   Asin: B00BFJD4C6

Airflow Rating: 78.6% Improvement Over Stock Street Legal In All US States: Pending

Features

  • 78.6% increase in air flow over the stock mouthpiece
  • Powder coated black body and CNC machined edges give your enging a whole new look
  • Compatible with any intake system that utilizes the stock location
  • EMISSIONS LEGALITY: Not legal for use in California or other states adopting California emissions standards.Non Carb Compliant.
  • See more on Amazon...

Brand: S&B Filters   |   Manufacturer: S&B Filters

Item Dimensions: 5.5 x 6.38 x 9.13 inches (14.0 x 16.2 x 23.2 cm)   |   Package Dimensions: 6.4 x 6.6 x 9.4 inches (16.3 x 16.8 x 23.9 cm)

Amazon Price: $195.00 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $195.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

Model: 7501   |    Mpn: 7501   |    Ean: 0085347075010   |    PartNumber: 7501   |   Asin: B000CN9164

The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1,000 RPM higher than Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

Features

  • Dual plane intake style with an Air-Gap
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Temperature sending unit boss clears all water necks
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Item Dimensions: 6.7 x 12.2 x 23.8 inches (17.0 x 31.0 x 60.5 cm)   |   Package Dimensions: 9 x 16.5 x 24.5 inches (22.9 x 41.9 x 62.2 cm)

First Available: 2012-06-05

Amazon Price: $264.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $252.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

A-Team Performance 102mm LS LS1 LS2 LS6 Intake Manifold Throttle Body Sheet Metal Fabricated Silver Compatible with Chevrolet GMC Pontiac

 PartNumber: 502CA   |   Asin: B076Z85CFQ

A-Team Performance 102mm LS LS1 LS2 LS6 Intake Manifold Throttle Body Sheet Metal Fabricated Silver LS1 LS2 LS6 EFI 0 THROTTLE OPENING FAST SHIPPING. -Fabrication: TIG Welded Aluminum -Black Throttle Body: Included -Gaskets: Included -Hardware: Included -Black Fuel Rails Included -Fuel crossover line: Included -Intake is about 3.5" taller than stock Features: -Black 3mm Sheet Metal Aluminum -The intake will not bend or flex With Boost Or Vacuum. -Black Fuel Rails With Braided Fuel Line Is Included -These will fit cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads Application: -This intake will fit Cathedral Port LS1/LS2/LS6 heads CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2) Package: Included:Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, Fuel Crossover Line.

Features

  • A-Team Performance 102mm LS LS1 LS2 LS6 Intake Manifold Throttle Body Sheet Metal Fabricated Silver Compatible with Chevrolet GMC Pontiac
  • See more on Amazon...

Brand: A-Team Performance   |   Manufacturer: A-Team Performance

Amazon Price: $499.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $499.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural Finish

 Ean: 0008534720401   |    PartNumber: 2040   |   Asin: B0091V29H6

Performer EPS Intake Manifold Installation Kit SB-Chevy 1957-86 Idle-5500 RPM Range Non-EGR applications 4-bbl square-bore carb flange
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold 350-2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to "up the standards" in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Installation Notes Port Exit Dimensions: 1.15" x 1.87" Carb Pad Height: 4.27" Click here to determine carburetor pad height. Manifold Height: (A) 3.74" (B) 4.80" MANIFOLD INSTALLATION KITS INCLUDEKit
Part #Intake
ManifoldIntake
GasketIntake
Bolt KitCarb
Stud KitCarb
Base...

Features

  • SB-Chevy...
  • Idle-5500 RPM...
  • Non-EGR...
  • 4-bbl square-bore carb flange Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's tuned for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock...
  • Port Exit Dimensions: 1.15 x 1.87...
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Item Dimensions: 25.7 x 17.1 x 14.3 inches (65.3 x 43.4 x 36.3 cm)   |   Package Dimensions: 14.3 x 17.1 x 25.7 inches (36.3 x 43.4 x 65.3 cm)

Amazon Price: $188.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-3 weeks
List Price: $188.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

A-Team Performance SHORT FABRICATED GM LS LS1 LS2 LS6 EFI INTAKE MANIFOLD W/ FUEL RAILS & THROTTLE BODY 15 THROTTLE OPENING

 PartNumber: LS1 CA INTAKE KIT   |   Asin: B06Y3TKW4G

A-Team Performance SHORT FABRICATED GM LS LS1 LS2 LS6 EFI INTAKE MANIFOLD W/ FUEL RAILS & THROTTLE BODY 15 THROTTLE OPENING
INCLUDES: Fabricated Aluminum Sheet Metal Intake Manifold 102MM Throttle Body Fuel Rails & Cross Over 4-Bolt LSX Throttle Cable Bracket Gaskets & Hardware are included. Intake is about 2" taller than stock FITMENT CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2) NOTES Fits LS-based engines with "cathedral" intake port shape only Due to transverse engine configuration, fitment on LS4 would require significant modification WE CAN FULLY CUSTOMIZE THIS INTAKE TO FIT YOU COLOR PREFERENCE WE CAN SWAP OUT THE FUEL RAILS, INTAKE & THROTTLE BODY TO EITHER BLACK OR CLEAR ANODIZED. PLEASE EMAIL US AND LET US KNOW WHAT COMBO YOU WANT! WE ARE HERE TO HELP WITH ALL OF YOUR LS NEEDS! CHECK OUT OUR OTHER LISTINGS FOR VALVE COVERS, WIRES, COILS, COIL RELOCATION KITS, HARMONIC DAMPER, FUEL INJECTORS AND MUCH MUCH MORE!
A-Team Performance parts are sold exclusively by Southwest Performance Parts.

Features

  • A-Team Performance SHORT FABRICATED GM LS LS1 LS2 LS6 EFI INTAKE MANIFOLD W/ FUEL RAILS & THROTTLE BODY 15 THROTTLE OPENING
  • See more on Amazon...

Brand: A-Team Performance   |   Manufacturer: A-Team Performance

Amazon Price: $529.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $529.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

ALLOYBOLTZ - BIG BLOCK CHEVY BBC 396 400 427 454 STAINLESS STEEL ENGINE HEX BOLT KIT

 PartNumber: H-5100   |   Asin: B073WP1RC5

Dress Up Your Chevy 396 402 427 454 Engine with our 236 Piece stainless steel hex bolt kit!! This kit has a natural stainless finish. The bolts in this kit are made from 304 stainless steel. This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items: Intake Manifold- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley- Fan Pulley - Carb Stud Kit The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold. If you are using a Quadrajet carb, just let us know with your payment and we will include a mounting bolt kit for you! Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These extra thick washers are designed to Clear Large Tube Headers.

Features

  • Dress Up Your Chevy 396-402-427-454 Engine with our 236 Piece stainless steel hex bolt kit!! This kit has a natural stainless finish. The bolts in this kit are made from 304 stainless steel.
  • This Bolt Kit Fits All 396 402 427 454 Chevy Engines(Non-EFI). This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items:
  • Kit comes with components for the Intake Manifold- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley - Fan Pulley - Carb Stud Kit
  • The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold.If you are using a Quadrajet carb, just let us know with your payment and we will include a mounting bolt kit for you.
  • Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These extra thick washers are designed to Clear Large Tube Headers.
  • See more on Amazon...

Brand: Alloyboltz   |   Manufacturer: Alloyboltz

Amazon Price: $60.00 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $60.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

LS Throttle Body Adapter / LS1 3 Bolt Intake to LS3 4 Bolt TB DBC 551513

 Ean: 0656729845134   |    PartNumber: 551513   |   Asin: B011CMYWVW

LS Throttle Body Adapter 3 Bolt Intake to 4 Bolt Throttle Body DBW and DBC Throttle Bodies 75mm hole tapered to 92mm Natural Finish Aluminum Includes: Adapter Plate, Bolts, O-Ring Seal 75mm through hole, tapered to 92mm for the throttle body If running a throttle body larger than 92mm, spacer #335-551571 is required along with longer bolts (M6-50mm) Works with both Drive By Wire (DBW) and Drive By Cable (DBC) throttle bodies

Features

  • 3 Bolt Intake to 4 Bolt Throttle Body
  • DBW and DBC Throttle Bodies
  • 75mm hole tapered to 92mm
  • Natural Finish Aluminum
  • Includes: Adapter Plate, Bolts, O-Ring Seal
  • See more on Amazon...

Brand: ICT Billet   |   Manufacturer: ICT Billet

Item Dimensions: 0.7 x 5.9 x 8.3 inches (1.8 x 15.0 x 21.1 cm)   |   Package Dimensions: 0.6 x 5.1 x 5.9 inches (1.5 x 13.0 x 15.0 cm)

Amazon Price: $22.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

BMW Genuine Intake Boot for 320i 323Ci 323i 325Ci 325i 325xi 328Ci 328i Z3 2.5 Z3 2.5i Z3 2.8

Model: FBA_13541705209   |    Mpn: FBA_13541705209   |    Ean: 0135417052097   |    PartNumber: FBA_13541705209   |   Asin: B007RHX1I2

3 Series-E46-Convertible-323Ci-(2000 to 2000)
3 Series-E46-Convertible-325Ci-(2000 to 2006)
3 Series-E46-Coupe-323Ci-(2000 to 2000)
3 Series-E46-Coupe-325Ci-(2000 to 2006)
3 Series-E46-Coupe-328Ci-(2000 to 2000)
3 Series-E46-Sedan-320i-(2000 to 2004)
3 Series-E46-Sedan-323i-(1999 to 2000)
3 Series-E46-Sedan-325i-(2000 to 2005)
3 Series-E46-Sedan-325xi-(2000 to 2004)
3 Series-E46-Sedan-328i-(1999 to 2000)
3 Series-E46-Wagon-323i-(2000 to 2000)
3 Series-E46-Wagon-325i-(2001 to 2005)
3 Series-E46-Wagon-325xi-(2001 to 2005)
Z3-Z3-Coupe-Z3 2.8-(1998/09 to 1999)
Z3-Z3-Roadster-Z3 2.5-(1998/09 to 2000)
Z3-Z3-Roadster-Z3 2.5i-(2001 to 2002)
Z3-Z3-Roadster-Z3 2.8-(1998/09 to 2000)

Features

  • Please see Product Description below for compatible models.
  • Eluka Inc Warranty: 12 months / 12000 miles
  • Intake Boot Throttle Housing to Mass Air Meter
  • See more on Amazon...

Brand: BMW   |   Manufacturer: BMW

Package Dimensions: 3.5 x 6.6 x 8.4 inches (8.9 x 16.8 x 21.3 cm)

Amazon Price: $23.24 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

ACDelco 55570283 GM Original Equipment Intake Manifold Kit with Multi-Port Fuel Injector and Fuel Rail

Model: 55570283   |    Mpn: 55570283   |    Ean: 0808709042365   |    PartNumber: 55570283   |   Asin: B00S0A25DM

ACDelco GM Original Equipment Engine Intake Manifolds evenly distribute the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel, and are GM-recommended replacements for your vehicle s original components. These original equipment intake manifolds have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Features

  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 11.75 x 18.12 x 22.12 inches (29.8 x 46.0 x 56.2 cm)   |   Package Dimensions: 11.7 x 18.1 x 22.1 inches (29.7 x 46.0 x 56.1 cm)

Amazon Price: $333.38 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $336.78 | Used Price: $212.57

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

JDMSPEED New 3.5'' Raw Performance SS Intake Manifold For Dodge 6.7L Cummins Diesel 07-18

 Ean: 0711766859206   |    PartNumber: Dodge 6.7L Cummins Diesel 07-18   |   Asin: B07HY5C4GN

Description:
100% Brand New,never been used
High Quality,Good Operation.
Perfect match for the original car.
Stable characteristics, high reliability.
Comes in a sealed package, ready to install.
Faster turbo spool.
50-200 degrees F drop in EGT's.
Deletes constrictive emissions equipment.
Significant gain in throttle response.
Unobstructed 3.5" inlet to two 3" mandrel bent tubes.
2 NPT ports
Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
50-200 degrees F drop in EGT's
0.5-1 MPG increase
Deletes constrictive emissions equipment
Significant gain in throttle response
Faster turbo spool
No installation guide is included
Professional installation is highly recommended
Package including:
1X Intake Manifold
Other Hardware Just as pictures show
Fit for:
FOR 2007.5-2018 Dodge 6.7L Cummins Diesel

Features

  • Comes in a sealed package, ready to install
  • Unobstructed 3.5 inlet to two 3 mandrel bent tubes
  • 50-200 degrees F drop in EGT's
  • Fully TIG welded with precise settings to produce optimal penetration without impacting airflow
  • Fitment:07-18 Dodge 6.7L Cummins Diesel
  • See more on Amazon...

Brand: JDMSPEED   |   Manufacturer: JDMSPEED

Package Dimensions: 5.91 x 7.87 x 12.6 inches (15.0 x 20.0 x 32.0 cm)

Amazon Price: $158.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $158.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

NEW 2.8hp 97cc Baja Mini Bike CLUTCH 5/8" Bore 11 Tooth Sprocket #35 Chain

 PartNumber: Baja Doodlebug clutch Blitz Dirt Bug   |   Asin: B008AGTCVY

Hard To Find 97cc 2.8 Hp Mini Baja Motorsports Mini Bike 11 Tooth & 5/8" Bore Clutch Assembly. Fits 97cc Blitz, Racer, DoodleBug etc..

Features

Brand: Scooter Parts Palace   |   Manufacturer: NONE

Package Dimensions: 2.4 x 4.5 x 4.5 inches (6.1 x 11.4 x 11.4 cm)

Amazon Price: $20.00 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Edelbrock 2701 Performer Intake Manifold

Model: 2701   |    Mpn: 2701   |    Ean: 0085347027019   |    PartNumber: 2701   |   Asin: B00063046Q

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5,500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

Features

  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5,500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Item Dimensions: 5.7 x 10.6 x 22.4 inches (14.5 x 26.9 x 56.9 cm)   |   Package Dimensions: 5.4 x 10.6 x 22.6 inches (13.7 x 26.9 x 57.4 cm)

First Available: 2012-06-05

Amazon Price: $139.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $144.35

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

NEVERLAND CNC Anodized Fork Tube Cap Bolt for Harley Sportster 1200 883 87-16 39mm Black

 PartNumber: M273-05   |   Asin: B01N4K9I9Q

Features:
Condition: 100% Brand New and High Quality
Material: High Grade Billet Aluminium
Replace those basic looking plain chrome caps on your stock 39mm tubes with a set of Joker Machine fork tube plugs.
Fully CNC-machined from billet aluminum.
Much lighter than the existing stock steel units.

Fitment:
1987-1994 FXR
1991-2005 FXDL, FXD
1987-up XL (Except 1200S, 2000-2005 FXDX, FXDXT)
for Models with 39mm Forks

Package included:
2 X Steering Stem Bolts

Features

  • Material: High Grade Billet Aluminium
  • For Models with 39mm Forks
  • Fully CNC-machined from billet aluminum
  • Much lighter than the existing stock steel units
  • Package included: 2 X Steering Stem Bolt
  • See more on Amazon...

Brand: NEVERLAND   |   Manufacturer: NEVERLAND

Package Dimensions: 1.5 x 4.21 x 5 inches (3.8 x 10.7 x 12.7 cm)

Amazon Price: $12.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Dorman OE Solutions 615-468 Intake Manifold (Upper Plastic)

Model: 615-468   |    Mpn: 615-468   |    Ean: 0885484411746   |    PartNumber: 615-468   |   Asin: B017O3IL9M

More like a complete service kit than a single part. Dorman's Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Features

  • Direct replacement for a proper fit every time
  • Quality plastic construction resists warping
  • Dorman's quality testing ensures year after year of trouble-free service
  • Integrated gaskets included
  • Original Equipment (OE) Number: 6F1Z9424BA
  • See more on Amazon...

Brand: Dorman   |   Manufacturer: Dorman OE Solutions

Item Dimensions: 8.4 x 17.1 x 21.2 inches (21.3 x 43.4 x 53.8 cm)   |   Package Dimensions: 8 x 17 x 22 inches (20.3 x 43.2 x 55.9 cm)

First Available: 2016-07-12

Amazon Price: Too low to display | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $213.95 | Used Price: $126.47

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Mophorn Engine Intake Manifold 06J133201AS for 09-15 Audi A3 TT VW GTI Jetta CC Tiguan Beetle 2.0T TSI Genuine Volkswagen Engine Intake 06J133201BH

 Ean: 0601707157914   |    PartNumber: Intake   |   Asin: B07HNXCDMP

Product Description:

The superior intake,for VW Volkswagen Beetle Jetta Tiguan CC 2.0L, will provide you an excellent performance of high quality, soft and durable material and elegant appearance. This intake features the function of assigning the air and fuel mixture from the carburetor or throttle body to each cylinder

Notice: professional installation is highly recommended

Reference OE number: 06J133201AS, 06J133201BH

Fittings:

2009-2013 Audi A3

2009-2013 Audi A3 Quattro

2009-2010 Audi TT Quattro

2012-2013 Volkswagen Beetle

2009-2015 Volkswagen CC

2010-2015 Volkswagen Eos

2009-2014 Volkswagen GTI

2008-2010 Volkswagen Jetta

2012-2013 Volkswagen Jetta

2009-2010 Volkswagen Passat

2009-2015 Volkswagen Tiguan

Feature

Made of plastic material, beautiful and practical to use

Easy to install, only need to screw

Produced by the sophisticated technology

Firmly and securely, guaranteeing the safety of your car

Fittings: VW Volkswagen Beetle Jetta Tiguan CC 2.0L

Specifications

Main material: stainless steel

Gross weigh: 7LBS

Fittings: VW Volkswagen Beetle Jetta Tiguan CC 2.0L

Package Content

1 x Intake manifold

Features

  • Application: for 09-15 Audi A3 VW Volkswagen Beetle Jetta Tiguan CC 2.0L
  • Reference OE number: 06J133201AS, 06J133201BH
  • Easy to install, only need to screw; Made of plastic material, beautiful and practical to use
  • Produced by the sophisticated technology; Firmly and securely, guaranteeing the safety of your car
  • Please check whether it's suitable for you before order, and you will feel free to contact us if there are any questions
  • See more on Amazon...

Brand: Mophorn   |   Manufacturer: Mophorn

Amazon Price: $61.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $61.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Left Engine Adjusting Unit for Intake Manifold DISA Valve for BMW E9x 328i E82 E60 X3 X5 3.0L

 Ean: 8002126270536   |    PartNumber: DV01   |   Asin: B07H1FDH5P


This item fits the following BMWs:
2008+ E82 BMW 128i - N51 engine
2006-2011 E90 BMW 328i 328xi 328i xDrive (N51) - 330i 330xi - Sedan
2006-2012 E91 BMW 328i 328xi 328i xDrive (N51)- Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive (N51)- Coupe
2007-2013 E93 BMW 328i (N51) - Convertible
2004-2010 E60 BMW 530i (N52) 530xi
2011+ F10 BMW 528i
2007-2010 E83 BMW 3.0si
2011 F25 BMW X3 xDrive28i
2007-2013 E70 BMW X5 3.0si
2003-2008 E85 BMW Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i


Fitment
2006 BMW 330i
2006-2007 BMW 530i
2006-2007 BMW 530xi
2006 BMW 330xi
2006-2008 BMW Z4 Roadster 3.0si
2006-2008 BMW Z4 Coupe 3.0si
2009-2011 BMW Z4 sDrive30i
2007-2011 BMW 328i Body: Convertible, Engine code: N51B30A
2007-2011 BMW 328i Body: Coupe, Engine code: N51B30A
2007-2011 BMW 328i Body: Sedan, Engine code: N51B30A
2012-2013 BMW 328i 3.0L L6 Body: Convertible, Engine code: N51B30A, Chassis: E93, Position: Left
2012-2013 BMW 328i 3.0L L6 Body: Coupe, Engine code: N51B30A, Chassis: E92, Position: Left
2007-2008 BMW 328xi Body: Coupe, Engine code: N51B30A, Position: Left
2007-2008 BMW 328xi Body: Sedan, Engine code: N51B30A, Position: Left
2007-2010 BMW X3
2011-2012 BMW X3 xDrive28i
2007-2008 BMW X5 3.0si
2009-2010 BMW X5 xDrive30i
2008-2013 BMW 128i Engine code: N51B30A
2009-2011 BMW 328i xDrive Body: Coupe, Engine code: N51B30A
2009-2011 BMW 328i xDrive Body: Sedan, Engine code: N51B30A
2012-2013 BMW 328i xDrive 3.0L L6 Body: Coupe, Engine code: N51B30A, Chassis: E92
2011 BMW 528i

Features

  • The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light.
  • Part number: 11617579114, 11617522929, 11617560537
  • Manufacturer warranty for 180 days from the date of purchase.
  • This is usually the culprit of DISA noise. Located next to the intake manifold. Considered the lower DISA valve
  • This adjusting unit fits cars with N52 or N51 engine - not N52N models.
  • See more on Amazon...

Brand: Mr Fix   |   Manufacturer: Mr Fix Group

Item Dimensions: 3 x 3 x 5 inches (7.6 x 7.6 x 12.7 cm)   |   Package Dimensions: 3.86 x 5.08 x 5.2 inches (9.8 x 12.9 x 13.2 cm)

Amazon Price: $172.50 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $172.50

Warranty: Manufacturer warranty for 90 days from the date of purchase.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Engine Intake Manifold Disa Valve 11617544805 For BMW E46 E39 E53 E60 E83 325i 325Ci M56 X3 X5 Z4 530i

 Ean: 0726853609497   |    PartNumber: 11617544805   |   Asin: B07H8BJ971

NMN Precision company is a large group company specializing in auto parts. All of our parts are according to the original factory specifications, and perfect match for the original cars, high-quality materials for durability. Please check the original Equipment(OE) Number and our fitment before place order. Product Warranty: Two Years Warranty Fitment/Compatibility 2003-2006 BMW 325Ci Coupe Only with M56 engine 2003-2005 E46 BMW 325i ONLY with M56 engine 2001-2005 E46 BMW 330i 330ci 330xi with M54 Engine 2001-2003 E39 BMW 530i with M54 Engine 2004-2005 E60 BMW 530i 530xi with M54 Engine 2004-2006 E83 BMW X3 3.0i with M54 Engine 2000-2006 E53 BMW X5 3.0i with M54 Engine 2000-2002 Z3 BMW Z3 3.0i with M54 Engine 2003-2006 E85 BMW Z4 3.0i with M54 Engine

Original Equipment(OE) Number: 11617544805,11617502275

Features

  • 2 Years Warranty
  • Engine Intake Manifold Adjusting Unit for BMW E46 325i 325Ci M56 X3 X5 Z4 530i
  • OE No.: 11617544805, 11617502275
  • Please Note this Part is Only for M56 Engine
  • Improves overall engine performance and fuel efficiency
  • See more on Amazon...

Brand: NMN Precision   |   Manufacturer: NMN Precision

Package Dimensions: 4.3 x 6.4 x 9.8 inches (10.9 x 16.3 x 24.9 cm)

Amazon Price: $85.89 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $85.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Chanoc Intake Manifold Pipe for GY6 49cc 50cc ATV Quad Scooter Moped 139QMA

 Ean: 0725714170893   |    PartNumber: IM50-GY02   |   Asin: B07GR4JJYD

Intake Manifold Pipe for GY6 49cc 50cc ATV Quad Scooter Moped 139QMA

Features

  • Intake manifold pipe
  • Come with dual vaccum port
  • Fit for GY6 49cc 50cc atv quad moped scooter
  • See more on Amazon...

Brand: Chanoc   |   Manufacturer: Chanoc

Amazon Price: $8.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Intake Manifold Runner Control Valve for 4884549AD Jeep Chrysler Dodge

 Ean: 0734779881507   |    PartNumber: 4884549AD   |   Asin: B07GSDXVT7

Fits:
2007 Chrysler Sebring L4 144 2.4L (2360cc)
2007 Dodge Caliber
2007 Jeep Compass
2007 Jeep Patriot
2008 Chrysler Sebring L4 144 2.4L (2360cc)
2008 Dodge Avenger L4 144 2.4L (2360cc)
2008 Dodge Caliber
2008 Jeep Compass
2008 Jeep Patriot
2009 Chrysler Sebring L4 144 2.4L (2360cc)
2009 Dodge Avenger L4 144 2.4L (2360cc)
2009 Dodge Caliber
2009 Dodge Journey L4 144 2.4L (2360cc)
2009 Jeep Compass
2009 Jeep Patriot
2010 Dodge Caliber
2010 Dodge Journey L4 144 2.4L (2360cc)
2010 Jeep Compass
2010 Jeep Patriot
2011 Dodge Caliber
2011 Jeep Compass L4 144 2.4L (2360cc)
2011 Jeep Patriot L4 144 2.4L (2360cc)
2012 Dodge Caliber L4 144 2.4L (2360cc)
2012 Jeep Compass L4 144 2.4L (2360cc)
2012 Jeep Patriot L4 144 2.4L (2360cc)
2013 Jeep Compass L4 144 2.4L (2360cc)
2013 Jeep Patriot L4 144 2.4L (2360cc)

Features

  • New intake manifold runner control valve replaces 4884549AD 911-902 911902 4884549AD 8V1010 IMRC4 MRC1002 911 902
  • Fits Jeep Chrysler Dodge
  • Package includes one Control Valve
  • 2-month hassle-free return and Money Back, pls buy with confidence
  • 2-5 days to arrive (shipping from USA), Welcome to buy
  • See more on Amazon...

Brand: LA-TAT   |   Manufacturer: LA-TAT

Amazon Price: $53.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $53.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

CF Advance For 01-06 BMW 2.2L 2.5L Air Intake Flap Adjuster Unit DISA Valve Repair Kit and O-Ring 2001 2002 2003 2004 2005 2006

 Ean: 0685650527017   |    PartNumber: D058RKS   |   Asin: B07GKXKNS2

Brand New Intake Manifold Runner Adjuster Unit Disa Valve Repair Kit With O-Ring.

Contain: One Flap, One Flap Driver, One O-Ring & One Mounting Pin.

Tech Note: The most common problem is the DISA valve air flap or flap driver is striped or broken causing noise and sometimes turn on check engine light for engine running lean conditions. This rebuilt kit is designed to fix this problem without changing the complete assembly and saves you money.

Note: If the DISA valve air is leaking from outside of the housing or the flap U housing is broken you need a new valve assembly.

Part Number:
11617544806, 116 175 448 06
11617502269, 116 175 022 69

Fitment:
2001-2005 BMW 320i L6-2171cc 2.2L F/I Vin M54
2001-2006 BMW 325Ci L6-2494cc 2.5L F/I Vin M54
2003-2006 BMW 325Ci L6-2494cc 2.5L F/I Vin M56
2001-2005 BMW 325i L6-2494cc 2.5L F/I Vin M54
2003-2005 BMW 325i L6-2494cc 2.5L F/I Vin M56
2001-2005 BMW 325Xi L6-2494cc 2.5L F/I Vin M54
2001-2005 BMW 525i L6-2494cc 2.5L F/I Vin M54
2004-2006 BMW X3 L6-2494cc 2.5L F/I Vin M54
2001-2002 BMW Z3 Roadster L6-2494cc 2.5L F/I Vin M54
2003-2005 BMW Z4 Roadster L6-2494cc 2.5L F/I Vin M54

Warranty: limited 5 years warranty free one time replace.

Compatibility info provided only for US models.

Discount shipping on multiple items, please contact us for details.

Features

  • Manufactured from superior -quality materials.
  • Computer integrated manufacturin.
  • Offer maximum durability and precise performance.
  • We process and ship your order in one business day.
  • Our commitment to you is total and we want you to always be 101% satisfied by the quality and efficiency of our service.
  • See more on Amazon...

Brand: CF Advance   |   Manufacturer: CF Advance

Amazon Price: $23.90 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

3" Charge Pipe Intake Elbow for 2003-2007 F250 F350 Ford 6.0L Powerstroke Diesel

 Ean: 0757538765184   |    PartNumber: 6.0L Powerstroke Blue Intercooler   |   Asin: B07HRZ59L5

COMPLETE 2003 - 2007 Ford 6.0L Diesel Blue Intercooler Piping 90 Degree ELBOW

Charge Pipe 90 Degree 3" Intake Elbow w/ 1 Gasket / 4 Bolts / 2 NPT 1/8 Ports

Model Fitment:

2003-2007 FORD F-Series / Excursion

Engine Application:

6.0L (363cid) OHV V8 POWER STROKE DIESEL TURBO

FITMENT GUIDE:

03 - 07 FORD F-250 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO

03 - 07 FORD F-350 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO

04 - 07 FORD F-450 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO

03 - 07 FORD F-550 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO

03 - 05 FORD EXCURSION 6.0L 363ci OHV V8 DIESEL TURBO

Following Items Included inside kit:

1 - Charge Pipe 90 Degree Intake Elbow

4 - Stainless Mounting Bolts

2 - NPT 1/8 Inch Ports Pre Capped

1 - Gasket Kit

Features

  • BRAND : NPBoosted
  • COMPLETE 2003 - 2007 Ford 6.0L Diesel Blue Intercooler Piping 90 Degree ELBOW
  • Charge Pipe 90 Degree 3 Intake Elbow w/ 1 Gasket / 4 Bolts / 2 NPT 1/8 Ports
  • 6.0L (363cid) OHV V8 POWER STROKE DIESEL TURBO
  • See more on Amazon...

Brand: NPBoosted   |   Manufacturer: NPBoosted

Amazon Price: $69.95 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $69.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

Intake Manifold Runner Control Valve IMRC for Chrysler Sebring Dodge Avenger Caliber Journey Jeep Compass Patriot Replace # 4884549AC 4884549AD

 PartNumber: IMRC-DG-001   |   Asin: B07JKCRHFW

Be Aware of the Top 3 Symptoms of a Bad or Failing Intake Manifold Runner Control Valve!
Difficulty starting the engine.
Engine misfires and decrease in power, acceleration, and fuel economy.
Check Engine Light comes on, throw error code like P2004 P2006 P2017.

Driving Efficiently depends on a working Runner Control Valve.
If you notice any of the above symptoms or warning signs, don't put it off, order a MNJWS Runner Control Valve.

Note: This Runner Control Valve will solve your P2004 P2006 P2017 error code.
If your code doesn't clear after installation, just wait about 1 hour and drive your car for about 50 miles, then it'll clear up or use an ODBII device to clear the code and see if it comes back.

Specification
Brand: MNJWS
Condition: Brand New
Color/Finish: Black
Terminal Quantity: 5
Terminal Type: Male
OEM Part Number: 4884549AC 4884549AD 911-902
Package Includes: 1 * Short Runner Control Valve

Features
High quality and durable!
Direct fit. Please check your part number and our fitment!
Great replacement for your old one!
Enhance your love car performance!

Fit The Following Vehicle
2007 2008 2009 Chrysler Sebring Short Runner Control Valve
2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 Jeep Patriot Short Runner Control Valve
2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 Jeep Compass Short Runner Control Valve
2007 2008 2009 2010 2011 Dodge Caliber Short Runner Control Valve
2008 2009 Dodge Avenger Short Runner Control Valve
2009 2010 Dodge Journey Short Runner Control Valve

Features

  • Direct Fit Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping. Even though it is not a genuine Chrysler part, but it works even better and last longer at a much lower price. Save yourself hundreds of dollars by purchasing a MNJWS Runner Control Valve, instead of getting it from a dealer
  • Fitment The Following Vehicles Intake Manifold Runner Control Valve for 4 Cylinder 2007-2009 Chrysler Sebring 2.4L | 2008-2009 Dodge Avenger 2.4L | 2007-2011 Dodge Caliber | 2009-2010 Dodge Journey 2.4L | 2007-2016 Jeep Compass | 2007-2016 Jeep Patriot. Please check the fitment in the product description
  • Replace Part # Replace Chrysler 4884549AC 4884549AD | Dorman 911-902 | SMP IMRC4 | Airtex 8V1010
  • Buy with Confidence Order from MNJWS, we offer a 12 month warranty, true worry-free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you
  • Premium Quality TOP quality Intake Manifold Runner Control Valve, also known as IMRC Valve or Short Runner Valve, controls the opening and closing of butterfly valves inside of the intake manifold runners, provide the engine with increased performance and efficiency, particularly at low engine speeds. If you have difficulty starting the engine, engine misfires and decrease in power, or check engine light comes on, you might need to replace your Short Runner Valve with this one
  • See more on Amazon...

Brand: MNJWS   |   Manufacturer: MNJWS

Package Dimensions: 1.97 x 1.97 x 1.97 inches (5.0 x 5.0 x 5.0 cm)

Amazon Price: $64.99 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $89.99

Warranty: 12 Months part exchange only. Labor or Any Shipping costs are not covered.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #34

Intake Manifold Runner Control For Dodge Caliber Jeep Chrysler Sebring 911-902

 Ean: 8011541222907   |    PartNumber: 4884549AD   |   Asin: B07H8XS5MJ

I. Stock, Shipping and Warranty
Items in Stock
Shipping Immediately
Unbeatable Price
High Quality

II. OEM Part Number

911-902 / 4884549AD
4884549AD, 8V1010, IMRC4, MRC1002, 911-902

III.The Part will fit the followings:

2013 Jeep Compass I4 144 2.4L (2360cc)
2013 Jeep Patriot I4 144 2.4L (2360cc)
2012 Dodge Caliber I4 144 2.4L (2360cc)
2012 Jeep Compass I4 144 2.4L (2360cc)
2012 Jeep Patriot I4 144 2.4L (2360cc)
2011 Dodge Caliber
2011 Jeep Compass I4 144 2.4L (2360cc)
2011 Jeep Patriot I4 144 2.4L (2360cc)
2010 Dodge Caliber
2010 Dodge Journey I4 144 2.4L (2360cc)
2010 Jeep Compass
2010 Jeep Patriot
2009 Chrysler Sebring I4 144 2.4L (2360cc)
2009 Dodge Avenger I4 144 2.4L (2360cc)
2009 Dodge Caliber
2009 Dodge Journey I4 144 2.4L (2360cc)
2009 Jeep Compass
2009 Jeep Patriot
2008 Chrysler Sebring I4 144 2.4L (2360cc)
2008 Dodge Avenger I4 144 2.4L (2360cc)
2008 Dodge Caliber
2008 Jeep Compass
2008 Jeep Patriot
2007 Chrysler Sebring I4 144 2.4L (2360cc)
2007 Dodge Caliber
2007 Jeep Compass
2007 Jeep Patriot

Please be sure to compare carefully with Pictures or OE number before buying items!
If you are not sure this part is correct, please feel free to email us and we'll reply you as soon as possible!

Features

  • Intake Manifold Runner Control
  • Reference OE/OEM Number: DSFDG006, 4884549AD, 8V1010, IMRC4, MRC1002
  • Fit for: Dodge Caliber Jeep Chrysler Sebring 911-902
  • Please be sure to compare carefully with Pictures or OE number before buying items!
  • If you are not sure this part is correct, please feel free to email us and we'll reply you as soon as possible!
  • See more on Amazon...

Brand: AKWH   |   Manufacturer: AKWH

Package Dimensions: 3.15 x 4.33 x 4.72 inches (8.0 x 11.0 x 12.0 cm)

Amazon Price: $49.00 | as of 11/12/2018(9:27pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Mophorn Engine Intake Manifold 06J133201AS for 09-15 Audi A3 TT VW GTI Jetta CC Tiguan Beetle 2.0T T...
  2. Left Engine Adjusting Unit for Intake Manifold DISA Valve for BMW E9x 328i E82 E60 X3 X5 3.0L
  3. JDMSPEED New 3.5'' Raw Performance SS Intake Manifold For Dodge 6.7L Cummins Diesel 07-18
  4. Engine Intake Manifold Disa Valve 11617544805 For BMW E46 E39 E53 E60 E83 325i 325Ci M56 X3 X5 Z4 53...
  5. Chanoc Intake Manifold Pipe for GY6 49cc 50cc ATV Quad Scooter Moped 139QMA
  6. Intake Manifold Runner Control Valve for 4884549AD Jeep Chrysler Dodge
  7. CF Advance For 01-06 BMW 2.2L 2.5L Air Intake Flap Adjuster Unit DISA Valve Repair Kit and O-Ring 20...
  8. 3" Charge Pipe Intake Elbow for 2003-2007 F250 F350 Ford 6.0L Powerstroke Diesel
  9. Intake Manifold Runner Control Valve IMRC for Chrysler Sebring Dodge Avenger Caliber Journey Jeep Co...
  10. Intake Manifold Runner Control For Dodge Caliber Jeep Chrysler Sebring 911-902

Most Wished For

  1. A-Team Performance 102mm LS LS1 LS2 LS6 Black Intake Manifold Throttle Body Sheet Metal Fabricated B...
  2. S&B Filters 76-1006B Chevrolet GMC LLY Diesel Engine Turbo Mouthpiece
  3. Edelbrock 7501 Performer RPM Air-Gap Intake Manifold
  4. A-Team Performance 102mm LS LS1 LS2 LS6 Intake Manifold Throttle Body Sheet Metal Fabricated Silver ...
  5. Manifold Installation Kit; Performer; EPS; SBC; 1957-1986; Natural Finish
  6. Intake Manifold w/Thermostat & Gaskets Kit for Ford Lincoln Mercury 4.6L V8
  7. A-Team Performance SHORT FABRICATED GM LS LS1 LS2 LS6 EFI INTAKE MANIFOLD W/ FUEL RAILS & THROTT...
  8. ALLOYBOLTZ - BIG BLOCK CHEVY BBC 396 400 427 454 STAINLESS STEEL ENGINE HEX BOLT KIT
  9. LS Throttle Body Adapter / LS1 3 Bolt Intake to LS3 4 Bolt TB DBC 551513
  10. Dorman 03211 Exhaust Manifold Hardware Kit

Most Gifted

  1. BMW Genuine Intake Boot for 320i 323Ci 323i 325Ci 325i 325xi 328Ci 328i Z3 2.5 Z3 2.5i Z3 2.8
  2. Dorman 615-188 Upper Intake Manifold for Select Ford Trucks
  3. ACDelco 55570283 GM Original Equipment Intake Manifold Kit with Multi-Port Fuel Injector and Fuel Ra...
  4. JDMSPEED New 3.5'' Raw Performance SS Intake Manifold For Dodge 6.7L Cummins Diesel 07-18
  5. NEW 2.8hp 97cc Baja Mini Bike CLUTCH 5/8" Bore 11 Tooth Sprocket #35 Chain
  6. Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln / Mercury Models
  7. Edelbrock 2701 Performer Intake Manifold
  8. NEVERLAND CNC Anodized Fork Tube Cap Bolt for Harley Sportster 1200 883 87-16 39mm Black
  9. Dorman OE Solutions 615-468 Intake Manifold (Upper Plastic)

Top Selling

  1. Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln / Mercury Models
  2. New Inline Fuel Shut Off Valve Petcock Dirt Bike Go Kart ATV
  3. EMPI 3230 Dual Port Installation Kit with Intake Gaskets Intake Boots and Intake Clamps VW Dune Bugg...
  4. APDTY 022013 Intake Manifold Tuning Short Air Flow Actuator Runner Control Valve IMRC Fits 1.8L 2.0L...
  5. Dorman 615-180 Intake Manifold
  6. Dorman 03211 Exhaust Manifold Hardware Kit
  7. ATP Automotive Graywerks 106001 Engine Intake Manifold
  8. Dorman 615-188 Upper Intake Manifold for Select Ford Trucks
  9. Intake Manifold Carburetor Boot for 1999-2004 Yamaha Bear Tracker YFM250
  10. Intake Manifold w/Thermostat & Gaskets Kit for Ford Lincoln Mercury 4.6L V8



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts