Frontpage > Car & Automotive > Replacement Parts > Transmission Tools

Best Transmission Tools - Buying Guide

Last Updated: 11/17/2018

Share on

Bestselling Transmission Tools on Amazon

  1. Streetside Tools SST-6604 Transmission Fluid Fill Adapter 5R55W Same as OTC 6604 Ford 307-437
  2. SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse)
  3. SST-0015 - Universal Lip Seal Installer / Remover Transmission Tool
  4. CTA Tools 6500 Automatic Transmission Clutch Spring Compressor
  5. Powerbuilt 940376 Transmission Stop-Off Tool
  6. SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool
  7. Streetside Tools SST-1574-Long - GM- Turbine Shaft Teflon Seal Installer/Resizer Transmission Tool
  8. SST-0154-HD - Heavy Duty Slide Hammer Set / Transmission Tool
  9. Streetside Tools SST-0149 - GM - Input Clutch Housing Spring Compressor Transmission Tool
  10. Clauss Studios Ford Mercury Lincoln Explorer Transmission Fluid Fill Adapter 5R55W 307-437 OTC 6604

  #1

Streetside Tools SST-6604 Transmission Fluid Fill Adapter 5R55W Same as OTC 6604 Ford 307-437

Model: SST-6604   |    Mpn: SST-6604   |    Ean: 0645759000118   |    PartNumber: SST-6604   |   Asin: B06XJD8TCW

Features:
This is a required tool to fill or add fluid to the 5R55W automatic transmission used on 2003-newer Ford Explorers.
Same as Ford No. 307-437 OTC 6604 and CTA 7420.

Instructions:
Drive the vehicle until the transmission is at operating temperature.
Make SURE it is level.
With the transmission in Park and the engine idling, remove the Oil level check plug from bottom center of transmission pan.
There are two plugs, one within the other. The oil check plug is the center one with the 3/16" allen.
When full, fluid should just trickle out of this hole.
1.) Remove the inner fill plug from transmission. Use a wrench to hold the outer nut to prevent draining all the fluid.
2.) Install the SST-6604 tool.
3.) Fill transmission to correct fluid level. Add fluid in small increments and continually check until fluid is slowly dripping.
4.) Remove the SST-6604 tool.
5.) Some leaking will occur this is normal and you should let this happen so that the proper level is attained.
6.) Re-install the inner fill plug in transmission.

Same as OTC 6604, Ford 307-347 & CTA 7420 Transmission Fluid Fill Adapter Tools

Features

  • Made in the USA!!!
  • Required to fill or add fluid to the 5R55W Transmission.
  • Use on 2003 - newer Ford Exploreres.
  • Save money by not having to get it serviced at the dealer.
  • A must have tool for every mechanic....
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Package Dimensions: 0.4 x 3 x 4.5 inches (1.0 x 7.6 x 11.4 cm)

Amazon Price: $11.90 | as of 11/17/2018(10:49am pst)
Availibility:
List Price: $11.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse)

Model: SST-0151   |    Mpn: HAYT0151   |    Ean: 0645759000019   |    PartNumber: HAYT0151   |   Asin: B011SBH8TU

Clutch Rear Tool

Features

  • Ships from 1 of 10 warehouses around the country: You get your tools FAST with standard shipping!
  • CLUTCH REAR TOOL
  • Vehicle Specialty Tools
  • Transmission
  • Professional
  • See more on Amazon...

Brand: TRANS-TOOL   |   Manufacturer: TRANS-TOOL

Item Dimensions: 2.4 x 6.9 x 7.6 inches (6.1 x 17.5 x 19.3 cm)   |   Package Dimensions: 1 x 5 x 7 inches (2.5 x 12.7 x 17.8 cm)

Amazon Price: $49.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

SST-0015 - Universal Lip Seal Installer / Remover Transmission Tool

 Ean: 0645759000026   |    PartNumber: SST-0015   |   Asin: B011SBGTA4

The SST-0015 universal transmission lip seal installer & protector is designed to prevent cutting or damaging of the delicate seals and o-rings. This tool is a must have in every re-builders toolbox. Features: This tool has .016 and .035 steel wire loops on each end. Similar to Atec Trans-Tool T-0015 and Kent-Moore # J-26744-A For use on these Transmissions: This tool is designed to compress and roll most lip seals and o-rings on most transmissions.

Features

  • Made in the USA!!
  • Universal Transmission Lip Seal Installer & Protector
  • Designed to prevent cutting or damaging of the delicate seals and o-rings.
  • This tool has .016 and .035 steel wire loops on each end.
  • Similar to Atec Trans-Tool T-0015 and Kent-Moore # J-26744-A
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Item Dimensions: 0.25 x 1 x 6 inches (0.6 x 2.5 x 15.2 cm)   |   Package Dimensions: 3 x 4 x 6.2 inches (7.6 x 10.2 x 15.7 cm)

Amazon Price: $19.99 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

CTA Tools 6500 Automatic Transmission Clutch Spring Compressor

Model: 6500   |    Mpn: 6500   |    Ean: 0053001065004   |    PartNumber: 6500   |   Asin: B00JHKZGOO

CTA Tools 6500 Automatic Transmission Clutch Spring Compressor is designed to remove and install the snap-ring onto the long reverse piston and return spring. It works without removing the center shaft and clutch assembly from the transmission housing. This compressor services GM, Ford, Toyota and other vehicles. Heavy-duty construction allows for strength and durability. Whether tuning up your '68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Features

  • Removes and Installs Snap-Ring to Long Reverse Piston and Return Spring
  • No Need to Remove Center Shaft and Clutch Assembly
  • Applications: GM, Ford, Toyota and Other Vehicles
  • Heavy-Duty Construction Allows for Strength and Durability
  • Whether Tuning Up Your '68 Corvette or Changing The Oil on a John Deere Tractor, CTA Can Supply You with the Tools Needed to do the Job
  • See more on Amazon...

Brand: CTA Tools   |   Manufacturer: CTA Tools

Item Dimensions: 2.75 x 7.5 x 18 inches (7.0 x 19.1 x 45.7 cm)   |   Package Dimensions: 2.6 x 8.2 x 17.9 inches (6.6 x 20.8 x 45.5 cm)

Amazon Price: $64.32 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $81.03

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Powerbuilt 940376 Transmission Stop-Off Tool

Model: 940376   |    Mpn: 940376   |    Ean: 0028907313221   |    PartNumber: 940376   |   Asin: B004KEHDSE

This tool fits most domestic rear wheel drive cars and light trucks, eliminating the draining of fluid when servicing the drive line or replacing universal joints. 1.30-in thru 1.45-in diameter.

Features

  • Transmission Stop Off Tool
  • This tool fits most domestic rear wheel drive cars and light trucks, eliminating the draining of fluid when servicing the drive line or replacing universal joints
  • 1.30-in thru 1.45-in diameter.
  • No need to drain the transmission fluid when making repairs or replacing drive shaft U-joints
  • The tool plugs the transmission drive shaft opening
  • Reduces fluid waste and with a lot less mess
  • See more on Amazon...

Brand: Powerbuilt   |   Manufacturer: Alltrade Tools, LLC

Item Dimensions: 0.4 x 2.8 x 6.7 inches (1.0 x 7.1 x 17.0 cm)   |   Package Dimensions: 0.4 x 2.8 x 6.7 inches (1.0 x 7.1 x 17.0 cm)

Amazon Price: $13.52 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $13.52

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool

Model: T-1097   |    Mpn: T-1097   |    PartNumber: T-1097   |   Asin: B01852XOSY

SST-1097 - GM - Front Pump Alignment Band

This tool helps with rebuilding GM Front Pumps to make sure the Pump Cover is aligned with the Pump Body.
Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.
Simple to use, with a wing nut that allows fast adjustment.
Covers a wide range GM Transmissions, and come ready to solve most of your Front Pump Alignment needs.

Similar to:
Atec Trans-Tool T-1097 and Kent-Moore J-21368-A.

For use on these Transmissions:
250, 250C, 350, 350-C, 375, 400, 3L80, 3L80-HD, 425, 475, 700-R4, 4L60, 4L60E and PowerGlide Transmissions.

Features

  • Made in the USA!
  • This tool helps with rebuilding GM Front Pumps to make sure the Pump Cover is aligned with the Pump Body.
  • Our heavy duty all-metal Alignment Bands are constructed of Stainless Steel for accurate alignment and long life.
  • Simple to use, with a wing nut that allows fast adjustment.
  • Covers a wide range GM Transmissions, and come ready to solve most of your Front Pump Alignment needs.
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Item Dimensions: 1 x 9 x 9 inches (2.5 x 22.9 x 22.9 cm)   |   Package Dimensions: 0.8 x 7.2 x 10.5 inches (2.0 x 18.3 x 26.7 cm)

Amazon Price: $49.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Streetside Tools SST-1574-Long - GM- Turbine Shaft Teflon Seal Installer/Resizer Transmission Tool

 Ean: 0645759000224   |    PartNumber: SST-1574-Long   |   Asin: B011SBHVKG

Streetside Tools
SST-1574-Long GM -700R4 (4L60) (4L60E) (4L65E) (4L70) Turbine Shaft Seal Installer / Re-sizer Set
This tool will RE-SIZE and INSTALL all SHORT and LONG (300mm) type INPUT SHAFTS. Both the installer and re-sizer are designed to allow both short and long shafts through the tool. No need to worry about the length of your input shaft. This tool can only be used with the solid Teflon ring seals. Prevents distortion during installation. This one tool will seat all 4 ring seals. Re-sizer prevents improper seal installation. Made from aluminum alloy, will outlast the cheap plastic types.

Similar to: Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long & T-1574-M

For use on these Transmissions: 700R4 / 4L60 / 4L60E / 4L65E / 4L70L 1982 - UP

Features

  • Made in the USA!
  • Prevents distortion during installation.
  • This one tool will seat all 4 ring seals.
  • Re-sizer prevents improper seal installation.
  • Made from aluminum alloy, will outlast the cheap plastic types.
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Item Dimensions: 1 x 2 x 6 inches (2.5 x 5.1 x 15.2 cm)   |   Package Dimensions: 1.5 x 3 x 4.8 inches (3.8 x 7.6 x 12.2 cm)

Amazon Price: $99.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $99.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

SST-0154-HD - Heavy Duty Slide Hammer Set / Transmission Tool

 PartNumber: SST-0154-HD   |   Asin: B011SBHQJC

SST-0154-HD - Heavy Duty Slide Hammer Set Heavy Duty Slide Hammer Set - Front Pump Puller 3/8" thread on one end and 10mm on the other end. Additional adapters available(sold separately): SST-0154-A - 3/8" to 5/16" Threaded Adapter SST-0154-B - 3/8" to 10mm Threaded Adapter SST-0154-C - 3/8" to 12mm Threaded Adapter SST-0154-D - 3/8" to 3/4" Threaded Adapter SST-0154-E - 3/8" to 1/2" Threaded Adapter SST-0154-F - 3/8" to 7/16" Threaded Adapter SST-1081 Converter Housing Seal Remover

Features

  • Made in the USA!
  • Heavy Duty Construction
  • 3/8 thread on one end and 10mm on the other end.
  • Optional adapters are sold seperatly for use on a variety of applications
  • Front Pump Puller when used with both slide hammers
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Amazon Price: $99.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $99.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Streetside Tools SST-0149 - GM - Input Clutch Housing Spring Compressor Transmission Tool

 Ean: 0645759000088   |    PartNumber: 43237-2   |   Asin: B011SBH408

SST-0149 - GM - Input Clutch Housing Spring Compressor Transmission Tool

Makes removing the clutch spring retainer easy.
The tool engages the lugs and pushes the piston return spring enough to access the snap ring.
The whole process takes just a few minutes.

Similar to Atec Trans-Tool T-0149
For use on these Transmissions:
700-R4, 4L60, 4L60E, 4L65E & 4L70

Features

  • Made in the USA!
  • Makes removing the clutch spring retainer easy.
  • Engages the lugs and pushes the piston return spring enough to access the snap ring
  • The whole process takes just a few minutes.
  • For use on these Transmissions 700-R4, 4L60, 4L60E, 4L65E & 4L70
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Package Dimensions: 0.4 x 4.96 x 5.8 inches (1.0 x 12.6 x 14.7 cm)

Amazon Price: $49.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Clauss Studios Ford Mercury Lincoln Explorer Transmission Fluid Fill Adapter 5R55W 307-437 OTC 6604

 PartNumber: 5R55W 307-437 OTC 6604   |   Asin: B07B5KY3YW

New made in the USA from steel with black oxide finish. In stock ready to ship Monday- Friday! This is a copy of Ford's special tool #307-437 to add, fill or when changing the fluid on the 5R55W automatic transmission used on 2003 newer Ford Explorers, also Mountaineer, Aviator and models using the 5R55W transmission. Easy to use: remove fill plug from transmission: install the filler adapter, fill transmission to correct fluid level and remove and reinstall fill plug in transmission. Cross reference part #' 307-437 and #OTC 6604

Features

  • This is a copy of Ford's special tool #307-437 to add, fill or when changing the fluid on the 5R55W automatic transmission used on 2003 newer Ford Explorers, also Mountaineer, Aviator and models using the 5R55W transmission.
  • See more on Amazon...

Brand: Clauss Studios   |   Manufacturer: Clauss Studios

Amazon Price: $11.50 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 2-3 business days
List Price: $11.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

SST-0156-B - GM - Transmission Holding Fixture / Tool with Base

Model: T-0156-B   |    Mpn: SST-0156-B   |    PartNumber: SST-0156-B   |   Asin: B011SBHV1U

Streetside Tools SST-0156-B GM Transmission Holding Fixture Features: Bench Mounts w/ included base. Full 360 degree swing. Dual tightening handles for a secure hold. All Steel Construction. Allows work comfort at any angle. Allows easy access to work on valve body. Lifting ring provided for ease of use with hoist. Similar to Kent-Moore J-8763-B & Atec Trans-Tool T-0156-B For use on these Transmissions: 180C (3L30), 200, 200C, 200-4R, 250, 250-C, 350, 350-C, 375, 400 (3L80), 425, 475 (3L80-HD), 700-R4 (4L60) (4L60E) 4L80E w/ Adapter

Features

  • Made in the USA!
  • Bench Mounts w/ included base. Full 360 degree swing.
  • Dual tightening handles for a secure hold. All Steel Construction.
  • Allows work comfort at any angle. Allows easy access to work on valve body.
  • Similar to Kent-Moore J-8763-B & Atec Trans-Tool T-0156-B
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Amazon Price: $169.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $169.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

SST-0158-HD - Heavy Duty Clutch Drum Spring Compressor Transmission Tool

Model: T-0158-HD   |    Mpn: SST-0158-HD   |    PartNumber: SST-0158-HD   |   Asin: B011SBI1DW

Universal clutch drum spring compressor. Adjustable, for most models of cars and light trucks. Applies pressure to the retaining washer in the clutch drum to compress clutch piston return springs, in order to remove or install snap ring during clutch repair or overhaul. Features: Adjustable to fit most Clutch Drums. Long legs for deep drums. Mounts on work bench or vise. Economical unit. Note: Does not do rear case pistons. Similar to Atec Trans-Tool T-0158-HD For use on these Transmissions: Turbo-hydramatic - 180 / 180C Turbo-hydramatic - 375 / 400 (3L80) / 425 / 475 Ford - C4, C5 & C6 Ford - AOD / AODE Ford - ATX Chrysler - Torqueflite "6" (904) / (30RH) Chrysler - Torqueflite "8" (727) / (36RH) GM - 700-R4 (Must be out of case. If you are working with it in the case you will need a T-0149.)

Features

  • Made in the USA!
  • Adjustable to fit most Clutch Drums.
  • Long legs for deep drums.
  • Mounts on work bench or vise.
  • Economical unit.
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Amazon Price: $84.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $84.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Sonnax 88950-T SOLENOID ADJUSTMENT TOOL

 Ean: 0798762815269   |    PartNumber: 88950-T   |   Asin: B00DP5ZE8K

sonnax 88950-T Solenoid Adjustment Tool '96-Later Transmission - Honda, Acura: 4-Speed, 3-Shaft, 5-Speed High Performance Transmission - Honda, Acura: 4-Speed, 3-Shaft, 5-Speed

Features

  • Allows proper adjustment of solenoid
  • Tool allows adjustment to be done without removing transmission from vehicle
  • Honda/Acura 5-Speed
  • See more on Amazon...

Brand: Sonnax   |   Manufacturer: Sonnax

Amazon Price: $19.92 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $19.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

BadShoe's How to Rebuild The Ford 4R70W Transmission Instructional DVD

 PartNumber: BSP4R70   |   Asin: B073HWSLX1

This is the latest video produced by BadShoe Productions. The copyrighted three DVD set has four hours of detailed How To instructions on rebuilding the Ford AODE, 4R70W and 4R70-75E transmissions. The AODE/4R70W was used in rear axle drive Ford cars and trucks with the 3.8L, 4.2L, 5.0L, 4.6L and 5.4L engines built from 1992 to 2014. The tranny I used was from a 96 4.6L TBird which is a typical example of the 4R70W and changes made through the years are pointed out in the video. Although the film is geared to the novice, the AODE/4R70W is an advanced designed unit with several special tools needed to overhaul it. Some prior transmission knowledge is recommended but with patience and eye to detail, the first timer can tackle it. I shot the video in a logical order of repair plus showing techniques, FYI tidbits, Hot Tips and as much misc. info I could think of. Bonus PDF file with spec., extra tips and info not shown in the video can be emailed to the purchaser.

Features

  • Produced by a Ford Senior Master Technician
  • Extra info added in a PDF file
  • Four hours of detailed instruction
  • Email service after the sale on subject matter
  • See more on Amazon...

Brand: BadShoe Productions   |   Manufacturer: BadShoe Productions

Amazon Price: $31.00 | as of 11/17/2018(10:49am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

SST-0156-BF - GM - Transmission Holding Fixture / Tool without Base

 PartNumber: SST-0156-BF   |   Asin: B018HRLQUK

Streetside Tools SST-0156-B GM Transmission Holding Fixture without Base Features: Bench Mounts with SST-0156-BB base ( shown but not included). Full 360 degree swing. Dual tightening handles for a secure hold. All Steel Construction. Allows work comfort at any angle. Allows easy access to work on valve body. Lifting ring provided for ease of use with hoist. Similar to Kent-Moore J-8763-B & Atec Trans-Tool T-0156-BF For use on these Transmissions: 180C (3L30), 200, 200C, 200-4R, 250, 250-C, 350, 350-C, 375, 400 (3L80), 425, 475 (3L80-HD), 700-R4 (4L60) (4L60E) 4L80E w/ Adapter

Features

  • Made in the USA!
  • Full 360 degree swing when mounted on SST-0156-BB Base (shown but not included).
  • Dual tightening handles for a secure hold.
  • Allows easy access to work on valve body.
  • Similar to Kent-Moore J-8763-B & Atec Trans-Tool T-0156-BF
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Amazon Price: $119.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $119.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Streetside Tools SST-2805 - Ford - Clutch Drum Shell Assembly Remover/Installer Transmission Tool [E4OD]

 Ean: 0645759000347   |    PartNumber: SST-2805   |   Asin: B011SBJ5WS

SST-2805 - Ford - Clutch Drum Shell Assembly Remover / Installer Transmission Tool [E4OD]

Features:
Easy removal and installation of clutch assembly.
Positive locking mechanism into Sun Shell notch.
Dual tightening handles for a secure hold.
All Steel Construction.
Tool doubles as a lift handle for ease of use.

Similar to Atec Trans-Tool T-2805 , Ford T-89T-70010-E and OTC 307-227

For use on these Transmissions:
E4OD ( 4R110 )

Features

  • Made in the USA!
  • Works on new & older clutch drums.
  • Easy removal and installation of clutch assembly.
  • Positive locking mechanism into Sun Shell notch.
  • Tool doubles as a lift handle for ease of use.
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Item Dimensions: 1.5 x 7 x 7 inches (3.8 x 17.8 x 17.8 cm)   |   Package Dimensions: 1 x 9 x 12 inches (2.5 x 22.9 x 30.5 cm)

Amazon Price: $49.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

1/2 Inch Drive, 30mm Deep, 12 Point Impact Socket, For Spindle or Axle Nut For Automatic Transmission Tail Output Shafts T1A-LSBH6303

 PartNumber: T1A-LSBH6303   |   Asin: B01M0SORT2

The T1A 30mm Axle Nut Socket is used for removing and installing axle nuts and automatic transmission tail output shafts. This extra deep 12 point axle nut socket is made from heat-treated alloy steel and fits precisely on the nut, so you know you are getting a high quality performance tool. This axle nut socket will work with Chrysler-300C, Crossfire 2004, Dodge-Freightliner Sprinter vans with 215mm rear axle 2004 and up, Magnum 2004, Jeep-Grand Cherokee V6 models 2005, Lexus-ES300, Pontiac-Vibe, Mercedes Benz models, Toyota-Avalon, Camry, Highlander, Matrix, Volkswagen-Beetle, Jetta, and Golf 1999 and up.

What separates T1A parts from others is quite simple: T1A stands behind what they sell 100%. Your satisfaction & safety is their main concern. T1A keeps that commitment starting with manufacturing and sees it through with the highest-quality customer service. T1A proudly runs the most reliable factories and extends over 30 years of automotive relationships and experience to its customers. This is why car people get excited about T1A tools and it's also the reason T1A is able to make an industry leading guarantee.

100% Total Satisfaction Guarantee:
If you're not 100% satisfied with your purchase, just send it back! TRUBUILT 1 AUTOMOTIVE will refund or replace your tool. Full 12-month replacement warranty & 30 day money back! ORDER NOW and when you do...consider buying a second socket for a friend or for your other toolbox!

Features

  • TOP QUALITY: This professional grade heavy duty Nut Socket is impact resistant quality, made from heat-treated alloy steel, used with a " drive and fits precisely on a 12 point nut.
  • SUPERIOR PERFORMANCE & DESIGN: The T1A 30mm 12 Point Axle Nut Socket will work with Chrysler-300C, Crossfire 2004, Dodge-Freightliner Sprinter vans with 215mm rear axle 2004 and up, Magnum 2004, Jeep-Grand Cherokee V6 models 2005, Lexus-ES300, Pontiac-Vibe, Mercedes Benz models, Toyota-Avalon, Camry, Highlander, Matrix, Volkswagen-Beetle, Jetta, and Golf 1999 and up. Don't settle for the hard way, the T1A 30mm 12 Point Axle Nut Socket will get the job done fast!
  • WHAT YOU GET: (1) 30mm 12 Point Axle Nut Socket
  • TESTED & APPROVED: Removing and installing axle nuts and automatic transmission tail output shafts requires a professional grade specialty tool. That's why professional mechanics have this 30mm 12 point axle nut socket in their garage or shop. T1A automotive technicians have used the T1A 30mm 12 Point Axle Nut Socket and the results are in: TESTED and APPROVED for strength, durability, and fit.
  • 100% SATISFACTION GUARANTEE: Every TruBuilt 1 Automotive tool is covered with a 12-month replacement warranty and a 30-day money back guarantee! Not satisfied? Return it for a full refund - TruBuilt to Last.
  • See more on Amazon...

Brand: TruBuilt 1 Automotive   |   Manufacturer: TruBuilt 1 Automotive

Package Dimensions: 1 x 2 x 4 inches (2.5 x 5.1 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

ATSG JATCO JF011E CVT Automatic Transmission Repair Manual (F4A51, CVT2, RE0F10A Transmission BEST STEP BY STEP Repair Book Available)

Model: JATCO JF011E   |    Mpn: JATCO JF011E   |    PartNumber: JATCO JF011E   |   Asin: B01HG13BMY

ATSG JATCO JF011E transmission technical repair manual is necessary to diagnose, overhaul and/or repair the JATCO JF011E CVT transmission. Dodge, Jeep, Mitsubishi and Nissan All use a similar continuously variable transmission (CVT) for their 4 cylinder applications. Built by JATCO, the JF011E is the CVT2 in Dodge and Jeep vehicles. It is also located in the F1CJA (2WD)/W1CJA (4WD) for in Mitsubishi and the RE0F10A in Nissan. This style CVT utilizes a torque converter with its intent to provide an optimal driving force that is responsive to throttle opening providing smooth uninterrupted ratio changes eliminating shift shock. Most applications will provide a manual shift mode function for both smooth driving without shift shock, and enjoyable driving with manual ratio selection. ATSG technical manuals are well written and produced by ATSG's professional technical staff. They have over 100+ combined years of experience, knowledge & wisdom in the automatic transmission industry. If you are looking to complete a band adjustment, torque spec, service a transmission, shift kits, or just doing a full rebuild on a unit, ATSG technical manuals are a must have! Most, but not all, ATSG manuals cover everything from parts identification, exploded views, home Specs, wiring harness locations, routing, electrical diagrams, internal planetary components, how to disassemble a transmission, how to rebuild the individual components, torque Specs, valve body identification, extension housing overviews and much, much more. Click the "ADD TO CART" button to get your ATSG JATCO JF011E automatic transmission technical repair manual now.

Features

  • Step-by-Step solution to repair, overhaul or rebuild of JATCO JF011E CVT transmission
  • High quality charts & images available for JF011E CVT
  • Valve body identification, electrical diagrams & wiring harness locations
  • Assembly, dis-assembly, diagnosis, troubleshooting, electronic controls & operation
  • Very detailed explanation for easy repair
  • See more on Amazon...

Brand: ATSG   |   Manufacturer: ATSG

Package Dimensions: 0.4 x 8.5 x 11 inches (1.0 x 21.6 x 27.9 cm)

First Available: 2016-06-22

Amazon Price: $28.11 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $29.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Transmission Seal Remover/Installer Gm

Model: 96480   |    Mpn: SL96480   |    Ean: 0956258637713   |    PartNumber: SL96480   |   Asin: B00DJF7J9S

SL96480 Features: -This tool was designed to gain access for removal and replacement of the shift selector shaft seal on G.M. rear wheel drive transmissions. -GM Transmission Seal Remover/Installer. -Repair Only. -Works with transmissions that have the neutral safety switch around the transmission shift selector which requires a longer tool to remove and replace the sealThis tool works on all 1996 and later trucks and Astro/Sierra Vans, 1998 and later GM SUV's includes Denali, Envoy and Escalade with transmissions 4L60E and 4L80E.. Product Type: -Tools. Use: -Drive Train. Quantity: -Single. Make: -GMC. Dimensions: Overall Height - Top to Bottom: -5 Inches. Overall Width - Side to Side: -6 Inches. Overall Depth - Front to Back: -8.6 Inches. Overall Product Weight: -0.35 Pounds.

Features

Brand: Schley Products   |   Manufacturer: Schley Products

Item Dimensions: 5 x 6 x 8.6 inches (12.7 x 15.2 x 21.8 cm)   |   Package Dimensions: 0.3 x 5.3 x 11.5 inches (0.8 x 13.5 x 29.2 cm)

Amazon Price: $23.38 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $29.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Streetside Tools SST-1001 - GM - Shift Lever Seal Remover/Installer Transmission Tool

 Ean: 0645759000064   |    PartNumber: SST-1001   |   Asin: B011SBJ8C0

SST-1001 - Shift Lever Seal Remover / Installer

Provides the easy removal and installation of the manual shaft (shift lever) seal. Draining of the transmission fluid is not required. The whole process takes just a few minutes.

Similar to:
Atec Trans-Tool T-1001, Kent-Moore J-26282, J-26401, KD Tools 2393, Snap-On YA9348 and Schley SL96480.

For use on these Transmissions:
180,180C (3L30) (4L30-E) Short Shaft Only 200, 200C, 200-4R 250, 250-C, 350, 350C 325,325-4L 375,400 (3L80), 425, 475(3L80-HD) 700-R4 (4L60) (4L60-E Pre 1995 Short Shaft Only) POWERGLIDE

Instructions:
To remove the seal:
1. disconnect selector shaft linkage.
2. place remover over the shaft with the remover screw backed off.
3. Apply downward pressure by force or with light tapping with a hammer while screwing clockwise into the seal. once the remover threads are engage into the seal, remove the seal by turning the remover screw until seal is extracted.

To replace the seal:
1. place the new seal on the selector shaft.
2. Place installer over end of selector shaft.
3. Apply downward pressure by tapping with a hammer.
4. Remove the installer.
5. Connect the selector shaft linkage.

Note: This tool is intended for use on short shaft transmissions and will not work on long shafts. The SST-1001-PV is required for long shafts.

Features

  • Made in the USA!
  • Provides the easy removal and installation of the manual shaft (shift lever) seal.
  • Draining of the transmission fluid is not required.
  • The whole process takes just a few minutes.
  • Similar to Atec Trans-Tool T-1001, Kent-Moore J-43909, J-43911, KD Tools 2393, Snap-On YA9348 and Schley SL96480.
  • See more on Amazon...

Brand: Streetside Tools   |   Manufacturer: Streetside Tools

Amazon Price: $39.95 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 24 hours
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Gallocabe 1/2-Inch Oxygen Sensor Removal Socket Wrench Tool Oxygen Sensor Impact Socket

 Ean: 0791258819055   |    PartNumber: FK421519-F002   |   Asin: B07JQ7SR3J


specification:

Product Name: Oxygen Sensor Removal Socket Wrench Tool

Condition: 100% brand new

Color: silver

Material: 50# steel

Surface: chrome

Socket length: 91mm

Incision in the socket: 8mm x 68mm

description:

The oxygen sensor wrench allows you to remove and install the sensor on a computerized engine controlled vehicle. Features include a chrome vanadium structure and a six-point socket with cutouts for wire gaps. The oxygen sensor wrench is suitable for 1/2 inch drive ratchet or breaker bars.

Premium tools - durable. Suitable for professional or DIY use.

feature:

- Quenched and tempered chrome vanadium steel sockets.

- For 1/2" drive ratchet or breaker lever.

- 6-point socket 22 mm (7/8 inch).

- Suitable for heated and unheated oxygen sensors.

- The cutout section allows the socket to pass through the wiring.

The package includes:

1x oxygen sensor disassembly socket wrench tool

Features

  • Premium tools - durable. Suitable for professional or DIY use.
  • The oxygen sensor wrench is suitable for 1/2 inch drive ratchet or breaker bars.
  • Features include a chrome vanadium structure and a six-point socket with cutouts for wire gaps.
  • The oxygen sensor wrench allows you to remove and install the sensor on a computerized engine controlled vehicle.
  • Quenched and tempered chrome vanadium steel sockets.
  • See more on Amazon...

Brand: Gallocabe   |   Manufacturer: Gallocabe

Item Dimensions: 1.97 x 1.97 x 1.97 inches (5.0 x 5.0 x 5.0 cm)   |   

Amazon Price: $11.99 | as of 11/17/2018(10:49am pst)
Availibility: Usually ships in 2-3 business days
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Gallocabe 1/2-Inch Oxygen Sensor Removal Socket Wrench Tool Oxygen Sensor Impact Socket

Most Wished For

  1. SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse)
  2. Streetside Tools SST-6604 Transmission Fluid Fill Adapter 5R55W Same as OTC 6604 Ford 307-437
  3. SST-0015 - Universal Lip Seal Installer / Remover Transmission Tool
  4. SST-0156-B - GM - Transmission Holding Fixture / Tool with Base
  5. SST-0158-HD - Heavy Duty Clutch Drum Spring Compressor Transmission Tool
  6. Sonnax 88950-T SOLENOID ADJUSTMENT TOOL
  7. BadShoe's How to Rebuild The Ford 4R70W Transmission Instructional DVD
  8. SST-0156-BF - GM - Transmission Holding Fixture / Tool without Base
  9. Streetside Tools SST-2805 - Ford - Clutch Drum Shell Assembly Remover/Installer Transmission Tool [E...
  10. CTA Tools 6500 Automatic Transmission Clutch Spring Compressor

Most Gifted

  1. CTA Tools 6500 Automatic Transmission Clutch Spring Compressor
  2. 1/2 Inch Drive, 30mm Deep, 12 Point Impact Socket, For Spindle or Axle Nut For Automatic Transmissio...
  3. SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse)
  4. Streetside Tools SST-6604 Transmission Fluid Fill Adapter 5R55W Same as OTC 6604 Ford 307-437
  5. SST-0015 - Universal Lip Seal Installer / Remover Transmission Tool
  6. ATSG JATCO JF011E CVT Automatic Transmission Repair Manual (F4A51, CVT2, RE0F10A Transmission BEST S...
  7. SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool
  8. Transmission Seal Remover/Installer Gm
  9. Powerbuilt 940376 Transmission Stop-Off Tool
  10. Streetside Tools SST-1001 - GM - Shift Lever Seal Remover/Installer Transmission Tool

Top Selling

  1. Streetside Tools SST-6604 Transmission Fluid Fill Adapter 5R55W Same as OTC 6604 Ford 307-437
  2. SST-0151 - GM - Rear Clutch Spring Compressor Transmission Tool (Low & Reverse)
  3. SST-0015 - Universal Lip Seal Installer / Remover Transmission Tool
  4. CTA Tools 6500 Automatic Transmission Clutch Spring Compressor
  5. Powerbuilt 940376 Transmission Stop-Off Tool
  6. SST-1097 - GM - Front Pump Alignment Band Automatic Transmission Tool
  7. Streetside Tools SST-1574-Long - GM- Turbine Shaft Teflon Seal Installer/Resizer Transmission Tool
  8. SST-0154-HD - Heavy Duty Slide Hammer Set / Transmission Tool
  9. Streetside Tools SST-0149 - GM - Input Clutch Housing Spring Compressor Transmission Tool
  10. Clauss Studios Ford Mercury Lincoln Explorer Transmission Fluid Fill Adapter 5R55W 307-437 OTC 6604



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.