Frontpage > Car & Automotive > Replacement Parts > Long Engine Blocks

Best Long Engine Blocks - Buying Guide

Last Updated: 08/25/2019

Share on


  #1

Lifan LF168F-2BQ 6.5 HP 196cc 4-Stroke OHV Industrial Grade Gas Engine with Recoil Start and Universal Mounting Pattern

Model: LF168F-2BQ   |    Mpn: LF168F-2BQ   |    Ean: 0852157002273   |    PartNumber: LF168F-2BQ   |   Asin: B003FXM412

Lifan offer industrial grade OHV engines that are quiet and provide dependable performance. All Lifan engines are built to meet and exceed industrial grade quality standards, true 1600 hours engines with cast iron sleeves, automotive grade rods, pistons, rings, crankshafts, cam shafts, and other internal parts. These replacement engines can be used for many applications including but not limited to pressure washers, air compressors, trenchers, concrete mixers, concrete saws, mortar mixers, go-karts and more.

Features

  • Industrial grade OHV 4-stroke gasoline engine with .75" keyway shaft
  • Compression release for E-Z starting - low oil shutdown engine protection
  • General purpose engine with universal mounting plate: great for recreational vehicles, construction, farm, and ranch
  • Built to meet and exceed industrial grade quality standards and provide dependable performance
  • Replaces Honda, Briggs, Kohler, and other brands; EPA certified
  • See more on Amazon...

Brand: Lifan   |   Manufacturer: Lifan Power USA

Item Dimensions: 16 x 15 x 16 inches (40.6 x 38.1 x 40.6 cm)   |   Package Dimensions: 14.9 x 16.1 x 16.8 inches (37.8 x 40.9 x 42.7 cm)

Amazon Price: $135.88 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $139.00

Warranty: 3 year limited warranty policy on items placed in residetial service and 1 year limited warranty policy on units placed in comercial service

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

ACDelco 20776808 GM Original Equipment Engine Ground Strap

Model: 20776808   |    Mpn: 20776808   |    Ean: 0021625772851   |    PartNumber: 20776808   |   Asin: B004TCYMEA

ACDelco GM Original Equipment Engine Ground Strap is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This original equipment strap will provide the same performance, durability, and service life you expect from General Motors.

Features

  • GM-recommended replacement part for your GM vehicle's original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
  • See more on Amazon...

Brand: ACDelco   |   Manufacturer: ACDelco

Item Dimensions: 2.25 x 6.25 x 12.75 inches (5.7 x 15.9 x 32.4 cm)   |   Package Dimensions: 1.7 x 6 x 11.5 inches (4.3 x 15.2 x 29.2 cm)

Amazon Price: $25.78 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $25.78

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

PROFessional Powertrain VC08 Chevrolet 350 Complete Engine, Remanufactured

Model: VC08   |    Mpn: VC08   |    Ean: 0653517007590   |    PartNumber: VC08   |   Asin: B007CWR09I

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come complete with installed oil pan and/or front cover, oil pump, pick up tube and in some cases valve covers and ship with a finishing gasket set. A dressed engine not only gives an OE appearance but saves the installer time and money. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $1,791.58 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $1,916.99

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

PROFessional Powertrain DFDV Ford 5.4L Engine, Remanufactured

Model: DFDV   |    Mpn: DFDV   |    Ean: 0653517145520   |    PartNumber: DFDV   |   Asin: B007CXDQQ8

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $3,950.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 days
List Price: $4,401.64

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

PROFessional Powertrain VA32 AMC 4.0L/242 Engine, Remanufactured

Model: VA32   |    Mpn: VA32   |    Ean: 0653517138911   |    PartNumber: VA32   |   Asin: B007CWQQTS

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come complete with installed oil pan and/or front cover, oil pump, pick up tube and in some cases valve covers and ship with a finishing gasket set. A dressed engine not only gives an OE appearance but saves the installer time and money. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,330.15 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $2,332.34

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

PROFessional Powertrain DCW4 Chevrolet 4.3L/262 Engine, Remanufactured

Model: DCW4   |    Mpn: DCW4   |    Ean: 0653517128745   |    PartNumber: DCW4   |   Asin: B001DH25XY

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,521.54 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $2,523.90

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

PROFessional Powertrain VCM5 Chevrolet 350 Engine, Remanufactured

Model: VCM5   |    Mpn: VCM5   |    Ean: 0653517138805   |    PartNumber: VCM5   |   Asin: B007CWRT9O

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come complete with installed oil pan and/or front cover, oil pump, pick up tube and in some cases valve covers and ship with a finishing gasket set. A dressed engine not only gives an OE appearance but saves the installer time and money. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,143.06 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 days
List Price: $2,145.07

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

PROFessional Powertrain DF46 Ford 302 Complete Engine, Remanufactured

Model: DF46   |    Mpn: DF46   |    Ean: 0653517016820   |    PartNumber: DF46   |   Asin: B007CXBOQM

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $1,692.10 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 weeks
List Price: $1,903.35

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

PROFessional Powertrain DF16 Ford 351M Engine, Remanufactured

Model: DF16   |    Mpn: DF16   |    Ean: 0653517017391   |    PartNumber: DF16   |   Asin: B007CXB4DU

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,055.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 1 to 2 weeks
List Price: $2,055.00

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

GM Parts 12530282 Crate Engine for GM Truck 350

Model: 12530282   |    Mpn: 12530282   |    PartNumber: 12530282   |   Asin: B00CFH42GO

GM Performance 12530282 Crate Engine - 350 GM Truck 1996-2000. Product Dimension (LxWxH): 26x31x29.

Features

  • GM Performance 12530282 Crate Engine - 350 GM Truck 1996-2000
  • Product Dimension (LxWxH): 26x31x29
  • See more on Amazon...

Brand: GM Performance Parts   |   Manufacturer: GM Performance

Package Dimensions: 26.75 x 28.5 x 30.25 inches (67.9 x 72.4 x 76.8 cm)

Amazon Price: $2,299.99 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 1-2 business days
List Price: $2,299.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

PROFessional Powertrain 848 Toyota 5VZF-E Complete Engine, Remanufactured

Model: 848   |    Mpn: 848   |    Ean: 0653517034992   |    PartNumber: 848   |   Asin: B007CX0864

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $4,336.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 days
List Price: $4,336.00

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

PROFessional Powertrain HD15 Ford 302 Complete Engine, Remanufactured

Model: HD15   |    Mpn: HD15   |    Ean: 0653517132384   |    PartNumber: HD15   |   Asin: B001DGYVXM

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,210.19 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $2,218.03

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

JIS Engine NLBVQ30 Nissan VQ30DE Rebuild Engine Long Block

 PartNumber: NLBVQ30   |   Asin: B00GBE4N9I

New parts installed: pistons, piston rings, gaskets and seals, oil pump, main and rod bearings, timing compoment, thrust washers (if applied), freeze plugs (if applied), water pump (if part of timing belt), rebuilt cylinder head, and reconditioned crankshaft.

Features

  • VQ30DE, 3.0L, DOHC, V6, 24Valves
  • Outright core charge is included, no need to return the core.
  • We usually ship to a business address or nearby terminal.
  • See more on Amazon...

Brand: JIS Engine   |   Manufacturer: JIS Engine

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

PROFessional Powertrain DCE1 Chevrolet 454 Engine, Remanufactured

Model: DCE1   |    Mpn: DCE1   |    Ean: 0653517009563   |    PartNumber: DCE1   |   Asin: B007CX53IC

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $3,125.86 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $3,128.79

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

PROFessional Powertrain DFTF Ford 5.4L Rear-Wheel Drive Engine, Remanufactured

Model: DFTF   |    Mpn: DFTF   |    Ean: 0653517143380   |    PartNumber: DFTF   |   Asin: B001DH28AE

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $3,150.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $3,335.60 | Used Price: $2,850.00

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

PROFessional Powertrain DDF3 Chrysler 5.7L Hemi Engine, Remanufactured

Model: DDF3   |    Mpn: DDF3   |    Ean: 0653517145278   |    PartNumber: DDF3   |   Asin: B007CXA24W

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $3,400.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 days
List Price: $3,870.11

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Ford Racing M6007X302E Crate Engine

Model: M6007X302E   |    Mpn: M6007X302E   |    Ean: 0756122102671   |    PartNumber: M6007X302E   |   Asin: B003TPKOKY

BOS 302-340 CAMSHAFT AUTO

Features

Brand: Ford   |   Manufacturer: Ford

Package Dimensions: 27.31 x 32.07 x 43.02 inches (69.4 x 81.5 x 109.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

PROFessional Powertrain DFEH Ford 4.6L Complete Engine, Remanufactured

Model: DFEH   |    Mpn: DFEH   |    Ean: 0653517139970   |    PartNumber: DFEH   |   Asin: B001DGX7D2

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

PROFessional Powertrain has been delivering quality engines and engine parts since 1959. All PROFessional Powertrain engines are remanufactured to meet or exceed OE specifications under ISO 9001:2000 certified manufacturing processes in a state-of-the-art facility. Choose PROFessional Powertrain remanufactured engines to experience like-new, increased performance for your vehicle.

Why Choose PROFessional Powertrain Remanufactured Parts? Professional installers choose remanufactured parts 4:1 over the next leading engine replacement option. Remanufactured parts offer economic and environmental options without compromising quality.

Built to be superior to OEM specifications The useful life of vehicles has greatly increased in recent years. At the same time, the primary cause of engine failure is poor maintenance or critical sub-component failure, meaning that a vehicle with a failed engine likely still has many serviceable years ahead of it. PROFessional Powertrain engines have been remanufactured back to like-new quality, so you can add years of useful life to your automotive at a fraction of the cost of buying a new vehicle.

PROFessional Powertrain produces engines to standards that meet or exceed original equipment (OE) specifications. Furthermore, because of advancements in the years since the original engine design, a remanufacture can add improvements that will produce a more efficient and durable engine. All engines are manufactured under ISO 9001:2000 standards. As a veteran Tier 1 supplier to OEMs, PROFessional Powertrain observes the same quality for remanufacturing processes as is demanded by OEM customers.

Engineered to Be Superior to OEM Performance PROFessional Powertrain engines are designed and built to be superior to the OE engine that came with your vehicle. Some key improvements include:

Bearings: Federal Mogul Aluminum bearings feature a patented thrust bearing that improves oiling to the thrust flange, preventing premature thrust failures such as those common to some Ford engines, resulting in longer life and dependability. Crankshafts: PROFessional Powertrain crankshaft journal surfaces offer an RA finish of 12 or lower, improving over the common RA finishes of 15 or higher found in most OE engines, and allowing for a better fit and closer tolerance levers for increased life. Rear Main Seals: Teflon seals are the latest technology available for zero oil seepage at the rear of the engine--a vast improvement over common neoprene seals that wear out over time. Pistons: Anodized piston heads increase durability, reduce emissions, and guarantee a longer lifespan over common OE engines that only offer heads with hypereutectic coating. Mating Surface Finishes: Better RMA finishes provide a better sealing contact surface for head gaskets and meet or exceed the recommendations of aftermarket gasket manufacturers. Castings: PROFessional Powertrain's aged and cycled castings have greater rigidity that provides longer stability. Valve Seat Angles: Three angle valve seats optimize sealing, maximize fuel mixture and flow, and ensure carbon clearout. Most OE engines only have two angle valve seats. Specification Tolerances: PROFessional Powertrain has recuded the allowable tolerances by 1/2. An engine that is built to tighter tolerances is a superior product in wear, durability, and dependability.

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $3,344.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $3,344.00

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

PROFessional Powertrain 538A Honda D16Y8 Complete Engine, Remanufactured

Model: 538A   |    Mpn: 538A   |    Ean: 0653517020780   |    PartNumber: 538A   |   Asin: B007CTIVWQ

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

PROFessional Powertrain DCR9 Chevrolet 350 Lt-1 Complete Engine, Remanufactured

Model: DCR9   |    Mpn: DCR9   |    Ean: 0653517042584   |    PartNumber: DCR9   |   Asin: B007CX6DWC

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,818.99 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $2,818.99

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

PROFessional Powertrain DC05 Chevrolet 305 Right Dip Engine, Remanufactured

Model: DC05   |    Mpn: DC05   |    Ean: 0653517007040   |    PartNumber: DC05   |   Asin: B007CX38QG

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $1,632.35 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $1,633.88

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

PROFessional Powertrain DC76 Chevrolet 250 Complete Engine, Remanufactured

Model: DC76   |    Mpn: DC76   |    Ean: 0653517006074   |    PartNumber: DC76   |   Asin: B007CX3PVE

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

PROFessional Powertrain has been delivering quality engines and engine parts since 1959. All PROFessional Powertrain engines are remanufactured to meet or exceed OE specifications under ISO 9001:2000 certified manufacturing processes in a state-of-the-art facility. Choose PROFessional Powertrain remanufactured engines to experience like-new, increased performance for your vehicle.

Why Choose PROFessional Powertrain Remanufactured Parts? Professional installers choose remanufactured parts 4:1 over the next leading engine replacement option. Remanufactured parts offer economic and environmental options without compromising quality.

Built to be superior to OEM specifications The useful life of vehicles has greatly increased in recent years. At the same time, the primary cause of engine failure is poor maintenance or critical sub-component failure, meaning that a vehicle with a failed engine likely still has many serviceable years ahead of it. PROFessional Powertrain engines have been remanufactured back to like-new quality, so you can add years of useful life to your automotive at a fraction of the cost of buying a new vehicle.

PROFessional Powertrain produces engines to standards that meet or exceed original equipment (OE) specifications. Furthermore, because of advancements in the years since the original engine design, a remanufacture can add improvements that will produce a more efficient and durable engine. All engines are manufactured under ISO 9001:2000 standards. As a veteran Tier 1 supplier to OEMs, PROFessional Powertrain observes the same quality for remanufacturing processes as is demanded by OEM customers.

Engineered to Be Superior to OEM Performance PROFessional Powertrain engines are designed and built to be superior to the OE engine that came with your vehicle. Some key improvements include:

Bearings: Federal Mogul Aluminum bearings feature a patented thrust bearing that improves oiling to the thrust flange, preventing premature thrust failures such as those common to some Ford engines, resulting in longer life and dependability. Crankshafts: PROFessional Powertrain crankshaft journal surfaces offer an RA finish of 12 or lower, improving over the common RA finishes of 15 or higher found in most OE engines, and allowing for a better fit and closer tolerance levers for increased life. Rear Main Seals: Teflon seals are the latest technology available for zero oil seepage at the rear of the engine--a vast improvement over common neoprene seals that wear out over time. Pistons: Anodized piston heads increase durability, reduce emissions, and guarantee a longer lifespan over common OE engines that only offer heads with hypereutectic coating. Mating Surface Finishes: Better RMA finishes provide a better sealing contact surface for head gaskets and meet or exceed the recommendations of aftermarket gasket manufacturers. Castings: PROFessional Powertrain's aged and cycled castings have greater rigidity that provides longer stability. Valve Seat Angles: Three angle valve seats optimize sealing, maximize fuel mixture and flow, and ensure carbon clearout. Most OE engines only have two angle valve seats. Specification Tolerances: PROFessional Powertrain has recuded the allowable tolerances by 1/2. An engine that is built to tighter tolerances is a superior product in wear, durability, and dependability.

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,198.74 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $2,200.80

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

PROFessional Powertrain VC96 Chevrolet 350 Complete Engine, Remanufactured

Model: VC96   |    Mpn: VC96   |    Ean: 0653517008146   |    PartNumber: VC96   |   Asin: B007CWRB1K

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary ProTester Max at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a hot fire engine. Engines come complete with installed oil pan and/or front cover, oil pump, pick up tube and in some cases valve covers and ship with a finishing gasket set. A dressed engine not only gives an OE appearance but saves the installer time and money. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

PROFessional Powertrain has been delivering quality engines and engine parts since 1959. All PROFessional Powertrain engines are remanufactured to meet or exceed OE specifications under ISO 9001:2000 certified manufacturing processes in a state-of-the-art facility. Choose PROFessional Powertrain remanufactured engines to experience like-new, increased performance for your vehicle.

Why Choose PROFessional Powertrain Remanufactured Parts? Professional installers choose remanufactured parts 4:1 over the next leading engine replacement option. Remanufactured parts offer economic and environmental options without compromising quality.

Built to be superior to OEM specifications The useful life of vehicles has greatly increased in recent years. At the same time, the primary cause of engine failure is poor maintenance or critical sub-component failure, meaning that a vehicle with a failed engine likely still has many serviceable years ahead of it. PROFessional Powertrain engines have been remanufactured back to like-new quality, so you can add years of useful life to your automotive at a fraction of the cost of buying a new vehicle.

PROFessional Powertrain produces engines to standards that meet or exceed original equipment (OE) specifications. Furthermore, because of advancements in the years since the original engine design, a remanufacture can add improvements that will produce a more efficient and durable engine. All engines are manufactured under ISO 9001:2000 standards. As a veteran Tier 1 supplier to OEMs, PROFessional Powertrain observes the same quality for remanufacturing processes as is demanded by OEM customers.

Engineered to Be Superior to OEM Performance PROFessional Powertrain engines are designed and built to be superior to the OE engine that came with your vehicle. Some key improvements include:

Bearings: Federal Mogul Aluminum bearings feature a patented thrust bearing that improves oiling to the thrust flange, preventing premature thrust failures such as those common to some Ford engines, resulting in longer life and dependability. Crankshafts: PROFessional Powertrain crankshaft journal surfaces offer an RA finish of 12 or lower, improving over the common RA finishes of 15 or higher found in most OE engines, and allowing for a better fit and closer tolerance levers for increased life. Rear Main Seals: Teflon seals are the latest technology available for zero oil seepage at the rear of the engine--a vast improvement over common neoprene seals that wear out over time. Pistons: Anodized piston heads increase durability, reduce emissions, and guarantee a longer lifespan over common OE engines that only offer heads with hypereutectic coating. Mating Surface Finishes: Better RMA finishes provide a better sealing contact surface for head gaskets and meet or exceed the recommendations of aftermarket gasket manufacturers. Castings: PROFessional Powertrain's aged and cycled castings have greater rigidity that provides longer stability. Valve Seat Angles: Three angle valve seats optimize sealing, maximize fuel mixture and flow, and ensure carbon clearout. Most OE engines only have two angle valve seats. Specification Tolerances: PROFessional Powertrain has recuded the allowable tolerances by 1/2. An engine that is built to tighter tolerances is a superior product in wear, durability, and dependability.

Features

  • Each engine we remanufacture is essentially reverse engineered - in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn't our engine last longer than your first?
  • Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not white box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
  • See more on Amazon...

Brand: PROFormance Powertrain   |   Manufacturer: PROFormance Powertrain

Package Dimensions: 36 x 36 x 36 inches (91.4 x 91.4 x 91.4 cm)

First Available: 2012-02-24

Amazon Price: $2,055.30 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 2 to 3 days
List Price: $2,057.23

Warranty: 3 Year, Unlimited Mileage Warranty. Labor Paid at $50 per hour against Mitchell Book Time on Claims

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

A&A Remanufactured 3.5L Engine for 2005-2006 Chevrolet Colorado GMC Canyon and Hummer H3. 1 Year Warranty!

 PartNumber: 300-5135   |   Asin: B07SNGR5VR

A&A Customer Service will assist with any fitment questions.
All A&A Remanufactured engines come with a 1-year warranty, ensuring buyer protection!
A&A's Engines are remanufactured using advanced machinery and a set process.
-Remanufactures every cylinder head with new valve seals, seats and resurfacing.
-Cylinder Heads are Pressure Tested with advanced machinery
-Replacement for every timing chain guide and set the engine to factory timing specifications.
-Reconditions every Crankshaft and Rod.
All Remanufactured Engines come with New Parts including:
🗸New Pistons.
🗸New Piston Rings.
🗸New Oil Pump.
🗸New Timing Chain.
🗸New Main Baring.
🗸New Rod Bearing.
🗸New and Full Head Gasket Set.

Installation Check List: (Failure to complete the following will void Warranty)
-Determine why the original engine failure occurred and make appropriate repairs.
-Insure this engine is the same application as the one being replaced.
-Clear all computer diagnostic codes from the vehicle prior to installing.
-Exchange the oil pan and pick up tube.
-Install new thermostat & gasket.
-Remove all "cap-plugs" orifice covers.
-Replace water pump.
-Install replacement sparkplugs & wires.
-Exchange the flywheel and bolts.
-Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).
-Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.
-Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
-Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Insure the cooling system is flushed and functioning properly.
-Heat tabs are installed on engine if melted or missing Warranty will be voided.

Features

  • This Engine is compatible with 2005 - 2006 Chevrolet Colorado, 2005 GMC Canyon and 2006 Hummer H3.
  • A&A's Quality control department remanufactures every cylinder head with new valve stem seals, seats and resurfacing.
  • All Engines have been replaced with new timing chain guides and our engines are set to the Factory timing specifications.
  • All Remanufactured Engines come with a 1-year warranty!
  • See more on Amazon...

Brand: A&A Auto and Truck   |   Manufacturer: A&A Auto and Truck

Package Dimensions: 49 x 49 x 49 inches (124.5 x 124.5 x 124.5 cm)

Amazon Price: $2,699.00 | as of 08/25/2019(2:17am pst)
Availibility: Usually ships in 1-2 business days
List Price: $2,699.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. A&A Remanufactured 3.5L Engine for 2005-2006 Chevrolet Colorado GMC Canyon and Hummer H3. 1 Year...

Most Wished For

  1. Lifan LF168F-2BQ 6.5 HP 196cc 4-Stroke OHV Industrial Grade Gas Engine with Recoil Start and Univers...
  2. PROFessional Powertrain DFDV Ford 5.4L Engine, Remanufactured
  3. PROFessional Powertrain VC08 Chevrolet 350 Complete Engine, Remanufactured
  4. PROFessional Powertrain VA32 AMC 4.0L/242 Engine, Remanufactured
  5. GM Parts 12530282 Crate Engine for GM Truck 350
  6. PROFessional Powertrain 848 Toyota 5VZF-E Complete Engine, Remanufactured
  7. PROFessional Powertrain HD15 Ford 302 Complete Engine, Remanufactured
  8. JIS Engine NLBVQ30 Nissan VQ30DE Rebuild Engine Long Block
  9. PROFessional Powertrain DCE1 Chevrolet 454 Engine, Remanufactured
  10. PROFessional Powertrain DFTF Ford 5.4L Rear-Wheel Drive Engine, Remanufactured

Most Gifted

  1. Lifan LF168F-2BQ 6.5 HP 196cc 4-Stroke OHV Industrial Grade Gas Engine with Recoil Start and Univers...
  2. PROFessional Powertrain VC08 Chevrolet 350 Complete Engine, Remanufactured
  3. PROFessional Powertrain DDF3 Chrysler 5.7L Hemi Engine, Remanufactured
  4. Ford Racing M6007X302E Crate Engine
  5. PROFessional Powertrain DFEH Ford 4.6L Complete Engine, Remanufactured
  6. PROFessional Powertrain 538A Honda D16Y8 Complete Engine, Remanufactured
  7. PROFessional Powertrain DCR9 Chevrolet 350 Lt-1 Complete Engine, Remanufactured
  8. PROFessional Powertrain DC05 Chevrolet 305 Right Dip Engine, Remanufactured
  9. PROFessional Powertrain DC76 Chevrolet 250 Complete Engine, Remanufactured
  10. PROFessional Powertrain VC96 Chevrolet 350 Complete Engine, Remanufactured

Top Selling

  1. Lifan LF168F-2BQ 6.5 HP 196cc 4-Stroke OHV Industrial Grade Gas Engine with Recoil Start and Univers...
  2. ACDelco 20776808 GM Original Equipment Engine Ground Strap
  3. PROFessional Powertrain VC08 Chevrolet 350 Complete Engine, Remanufactured
  4. PROFessional Powertrain DFDV Ford 5.4L Engine, Remanufactured
  5. PROFessional Powertrain VA32 AMC 4.0L/242 Engine, Remanufactured
  6. PROFessional Powertrain DCW4 Chevrolet 4.3L/262 Engine, Remanufactured
  7. PROFessional Powertrain VCM5 Chevrolet 350 Engine, Remanufactured
  8. PROFessional Powertrain DF46 Ford 302 Complete Engine, Remanufactured
  9. PROFessional Powertrain DF16 Ford 351M Engine, Remanufactured



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts