Frontpage > Car & Automotive > Performance Parts > Fuel Linkages

Best Fuel Linkages - Buying Guide

Last Updated: 05/22/2019

Share on


  #1

Moroso 64920 Carburetor Linkage Bushing Set

Model: 64920   |    Mpn: 64920   |    Ean: 0084663649202   |    PartNumber: 64920   |   Asin: B000CONZ7Y

Moroso steel carburetor linkage bushing set allows the fitting of a 1/4" fastener to the 1/2" diameter hole found in the throttle linkage plate. The split bushing design eliminates the sloppiness present when rubber bushings are used.

Features

  • Split bushing design permits simple installation
  • Gold iridite steel finish
  • Allows 1/4 fastener to 1/2 diameter hole fit
  • Sold individually
  • Manufacture 90 days limited warranty from day of purchase
  • See more on Amazon...

Brand: Moroso   |   Manufacturer: Moroso

Item Dimensions: 1.1 x 3.8 x 5.2 inches (2.8 x 9.7 x 13.2 cm)   |   Package Dimensions: 0.7 x 3.5 x 5 inches (1.8 x 8.9 x 12.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Fast 304147 EZ-EFI Cable Mount Kit

Model: 304147   |    Mpn: 304147   |    Ean: 0036584247814   |    PartNumber: 304147   |   Asin: B00BBOLWTM

The new Fast EZ-EFI cable mount kit is designed to work with the specific needs of the FAST 4150 throttle body found in EZ-EFI systems. Through its use in the FAST EZ-EFI, the FAST 4150 throttle body has helped revolutionize the efficiency of air intake systems in fuel injected applications. Until now, however, users have had to rely on an inferior generic mount kit to connect their throttle and TV (or kick down) cable. The American made FAST EZ-EFI cable mount kit features much greater quality, strength and a better overall appearance than the poor fitting generic kits commonly found in auto supply stores. The EZ-EFI cable mount kit is designed to work with and allow adjustability for automatic transmission TV cables, and is also specifically marked for the unique TV cable setup of GM 700R4 transmissions. The kit, built to be more accurate and stable than competitor's versions, features a proper tension double spring to ensure accurate throttle closing and maximize the performance of the EZ-EFI. The adjustable geometry of the linkage kit is specifically engineered to ensure proper wide open throttle actuation as well. The FAST EZ-EFI cable mount kit includes all necessary hardware to install and adjust, and includes a comprehensive selection of cable mounting brackets to cover all major cables, applications and brands.

Features

  • Better quality strength and appearance than generic kits found at chain auto parts stores
  • Designed to work with and allow adjustability for automatic transmission TV cables
  • Proper tension double spring ensures proper throttle closing and maximizes EZ-EFI performance
  • Adjustable geometry is specifically engineered to ensure proper wide open throttle actuation
  • Includes all necessary hardware to install and adjust
  • See more on Amazon...

Brand: FAST   |   Manufacturer: FAST

Item Dimensions: 2.6 x 6.4 x 12 inches (6.6 x 16.3 x 30.5 cm)   |   Package Dimensions: 2.7 x 6.5 x 11.9 inches (6.9 x 16.5 x 30.2 cm)

First Available: 2013-01-17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Mr. Gasket 3812G Rod End Carburetor Linkage Component-Two Per Set

Model: 3812G   |    Mpn: 3812G   |    Ean: 0084041038123   |    PartNumber: 3812G   |   Asin: B00068OR1E

Mr. Gasket Rod End Carburetor Linkage Component has 6 separate linkage pieces to allow you to assemble your own custom carburetor linkage system using parts from one source. It has 1/4 rod ends. Every piece of carburetor linkage is available separately eliminating the need to buy a standard kit for special applications.

Features

  • Has 6 separate linkage pieces that allows easy assembling
  • Eliminates the need to buy a standard kit for special applications
  • Every piece is available separately
  • Comes with 1/4 rod ends
  • Sold as a pair
  • See more on Amazon...

Brand: Mr. Gasket   |   Manufacturer: Mr Gasket

Package Dimensions: 0.7 x 3.5 x 5.9 inches (1.8 x 8.9 x 15.0 cm)

First Available: 2005-10-28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Mr. Gasket 6026 Carburetor Bushing Kit

Model: 6026   |    Mpn: 6026   |    Ean: 0084041060261   |    PartNumber: 6026   |   Asin: B000BWAPHK

Mr. Gasket Carburetor Bushing Kit reduces the 1/2 " throttle shaft hole to 1/4" inside diameter which makes for an easy throttle linkage attachment. Can be used to replace the stock rubber unit. This carburetor bushing kit is machined from cold roll steel then bright zinc plated. The two piece bushing measures 9-1/6" wide when installed and fits most 4-bbl. carburetors with 1/2" throttle linkage hole. Their split-bushing design permits simple installation and eliminates the sloppiness present when rubber bushings are used.

Features

  • Two-piece bushing measures 9/16 "
  • Can be used to replace the stock rubber unit
  • Machined from cold roll steel
  • Bright zinc plated
  • Split-bushing design permits simple installation
  • See more on Amazon...

Brand: Mr. Gasket   |   Manufacturer: Mr Gasket

Package Dimensions: 0.4 x 3.3 x 6 inches (1.0 x 8.4 x 15.2 cm)

First Available: 2005-10-28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Allstar Performance ALL54173 Right Quick Disconnect for Carburetor Linkage Kits

Model: ALL54173   |    Mpn: ALL54173   |    Ean: 0848238027785   |    PartNumber: ALL54173   |   Asin: B009Q77DVM

Replacement Quick Disconnect For 049-ALL54170

Features

Brand: Allstar   |   Manufacturer: Allstar Performance

Item Dimensions: 0.75 x 3.5 x 4.5 inches (1.9 x 8.9 x 11.4 cm)   |   Package Dimensions: 0.75 x 3.5 x 4.5 inches (1.9 x 8.9 x 11.4 cm)

First Available: 2012-10-13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Edelbrock 7094 THROTTLE LINKAGE KIT

Model: 7094   |    Mpn: 7094   |    Ean: 0085347070947   |    PartNumber: 7094   |   Asin: B00062YBFC

The Edelbrock Inline Mount Throttle Linkage Kit provides test confirmed smooth, consistent part-throttle operation with a 25 horsepower gain over Torker II and a torque gain of 30 foot / pounds over Performer. It uses high quality aluminum, stainless steel, brass parts and spherical rod ends for great performance and show quality. It will not fit tall-deck truck blocks and includes metering rods to calibrate Edelbrock carburetors. It is sold as a kit.

Features

  • Provides test confirmed smooth, consistent part-throttle operation
  • Uses high quality aluminum, stainless steel, brass parts and spherical rod ends for great performance
  • Will not fit tall-deck truck blocks
  • Includes metering rods to calibrate Edelbrock carburetors
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Package Dimensions: 1.9 x 5.3 x 13.1 inches (4.8 x 13.5 x 33.3 cm)

First Available: 2012-06-05

Warranty: 90 Day Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Trans-Dapt 2334 Morse Cable Bracket

Model: 2334   |    Mpn: 2334   |    Ean: 0086923023340   |    PartNumber: 2334   |   Asin: B000CPZW56

Trans-Dapt Performance Product carburetor brackets are precision stamped, and chrome plated for a functional, awesome looking set up of your carburetor.

Features

Brand: Trans-Dapt Performance   |   Manufacturer: Trans-Dapt Performance

Item Dimensions: 1 x 3.25 x 5.88 inches (2.5 x 8.3 x 14.9 cm)   |   Package Dimensions: 2.3 x 3.1 x 5.8 inches (5.8 x 7.9 x 14.7 cm)

Warranty: One Year Limited Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Mota Performance A40230 Carburetor Linkage Mounting Plate

Model: A40230   |    Mpn: A40230   |    Ean: 0844974052180   |    PartNumber: A40230   |   Asin: B002ZMKKH4

Mota Performance Carburetor Linkage Mounting Plates are an easy and trouble free way to mount your throttle cable

Features

  • Heavy Gauge Steel construction
  • Bright polished triple plated chrome finish
  • Uses GM cable and includes brackets
  • Superior quality triple chrome plating ensures longevity and lasting beauty
  • Includes mounting hardware
  • Sold individually
  • See more on Amazon...

Brand: Mota Performance   |   Manufacturer: Mota Performance

Package Dimensions: 1 x 11.2 x 17.5 inches (2.5 x 28.4 x 44.5 cm)

Warranty: 1 Year Manufacturer's Warranty, free from defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Lokar TCB-PLR3 8-1/4" to 8-5/8" Center Distance Progressive Linkage Rod for Holley Carburetor

Model: TCB-PLR3   |    Mpn: TCB-PLR3   |    Ean: 0847087005036   |    PartNumber: TCB-PLR3   |   Asin: B005P6OEQK

Lokar 8-1/4 inch to 8-5/8 inch Center Distance Progressive Linkage Rod for Holley Carburetor can be used for in-line dual carburetors. It allows for use of one carburetor during normal driving and both carburetors at wide open throttle. It is made in the U.S.A. It has a lifetime warranty.

Features

  • Lokar a trusted industry leader
  • Backed by manufacturer's Warranty
  • Great Performance
  • Enhance your vehicle
  • Fast Shipping
  • See more on Amazon...

Brand: Lokar   |   Manufacturer: Lokar

Item Dimensions: 0.5 x 5.75 x 11.75 inches (1.3 x 14.6 x 29.8 cm)   |   Package Dimensions: 0.1 x 5.6 x 11.3 inches (0.3 x 14.2 x 28.7 cm)

First Available: 2011-09-24

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Edelbrock 1444 METERING ROD

Model: 1444   |    Mpn: 1444   |    Ean: 0085347014446   |    PartNumber: 1444   |   Asin: B00062Z2FK

The Edelbrock Metering Rods are designed for use with the Edelbrock Performer Series and Thunder Series AVS carburetors only and not with any other brands. These metering rods allow you to fine-tune your carburetor for optimum performance and are used to control the air/ fuel mixture. Since metering rods are available with different step combinations, it is possible to independently alter the air/fuel ratio for both cruise and power modes with a single rod change. The small area at the tip of the rod is the power step and the thicker area next to it is the cruise step with a dimension of 0. 065 x 0. 037. These rods can be changed in seconds by removing the single hold-down screw and are sold as a pair.

Features

  • Designed for use with the Edelbrock Performer and Thunder Series carburetors only
  • Metering rod is used to control the air/fuel mixture
  • Diameter of the cruise and the power is 0. 065 and 0. 037
  • Rods are incredibly easy to change
  • Allows you to fine-tune your carburetor for optimum performance
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Package Dimensions: 1 x 1.3 x 5.7 inches (2.5 x 3.3 x 14.5 cm)

First Available: 2012-06-05

Warranty: 90 Day Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Mr. Gasket 3815 Carburetor Linkage Component

Model: 3815   |    Mpn: 3815   |    Ean: 0084041038154   |    PartNumber: 3815   |   Asin: B00068OR1O

Mr. Gasket Carburetor Linkage Components are designed to assemble custom carburetors. They are made from high quality material that ensures long lasting durability. These components are corrosion resistant and facilitate hassle free installation.

Features

  • Designed to assemble custom carburetors
  • Made from high quality material
  • Ensures long lasting durability
  • Corrosion resistant
  • Facilitates hassle free installation
  • See more on Amazon...

Brand: Mr. Gasket   |   Manufacturer: Mr Gasket

Package Dimensions: 0.1 x 9 x 14.3 inches (0.3 x 22.9 x 36.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

KRC 1040 Throttle Rod Kit

Model: KRC-1040   |    Mpn: 1040   |    Ean: 0811854000401   |    PartNumber: 1040   |   Asin: B00CU6ZE3K

Quick disconnect throttle linkages include carb bushings for most carburetors. Heavy duty aluminum rods can withstand severe engine vibrations. Linkages can be removed from carburetor in 5 seconds. Patent #6338332

1. Use proper linkage travel and return springs. Make sure that the throttle and butterflies of the carburetor are fully wide open. Use a minimum of two different places on the linkage. Ensure the linkage and the return springs operate without interference throughout the full range of throttle travel. 2. Use an adjustable pedal stop. Excessive loading on the linkage, carburetor shafts and butterflies can cause the mechanisms to distort and jam. To avoid this use as adjustable pedal stop, and at the fully open throttle position, synchronize the stop on the carburetor with the stop pedal.

Features

  • Quick disconnect throttle linkages include carb bushings for most carburetors
  • Heavy duty aluminum rods can withstand severe engine vibrations
  • Linkages can be removed from carburetor in 5 seconds
  • See more on Amazon...

Brand: KRC   |   Manufacturer: KRC

Item Dimensions: 6 x 1 x 20 inches (15.2 x 2.5 x 50.8 cm)   |   Package Dimensions: 0.7 x 5.85 x 23.7 inches (1.8 x 14.9 x 60.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Allstar Performance ALL54162 27" Aluminum Carburetor Linkage Rod with Two 1/4-28" Rod Ends

Model: ALL54162   |    Mpn: ALL54162   |    Ean: 0848238027709   |    PartNumber: ALL54162   |   Asin: B009Q77DD0

Allstar Performance 54162 Alum Carb Linkage Solid Tube. Product Dimension (LxWxH): 4x27.6x1.25.

Features

Brand: Allstar   |   Manufacturer: Allstar Performance

Package Dimensions: 1 x 4 x 31 inches (2.5 x 10.2 x 78.7 cm)

First Available: 2012-10-13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Mr. Gasket 3830G Dual Quad Carburetor Linkage Kit

Model: 3830G   |    Mpn: 3830G   |    Ean: 0084041038307   |    PartNumber: 3830G   |   Asin: B000CA5VPM

Mr. Gasket Dual Quad Carburetor Linkage Kit is primarily designed for high performance, low-rise street manifold usage. Dual quad carburetor linkage may be used as a progressive set-up or straight to the carburetors. It features cadmium steel linkage rods and spherical-universal swivel ends for good looks and bind-free performance. Component parts of the dual quad linkage may be used in conjunction with existing linkage to operate custom carburetor applications.

Features

  • Inline carburetor orientation
  • Progressive opening
  • Features spherical-universal swivel ends for good looks and bind-free performance
  • Includes cadmium-plated steel linkage rods
  • Component parts of the dual quad linkage may be used in conjunction with existing linkage to operate custom carburetor applications
  • See more on Amazon...

Brand: Mr. Gasket   |   Manufacturer: Mr Gasket

Package Dimensions: 0.6 x 3.8 x 14.5 inches (1.5 x 9.7 x 36.8 cm)

First Available: 2005-10-28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Lokar TCB-PLR1 6-3/8" to 6-3/4" Center Distance Progressive Linkage Rod for Edelbrock Carburetor

Model: TCB-PLR1   |    Mpn: TCB-PLR1   |    Ean: 0847087003339   |    PartNumber: TCB-PLR1   |   Asin: B005P6OEOW

Lokar 6-3/8 inch to 6-3/4 inch Center Distance Progressive Linkage Rod for Edelbrock Carburetor can be used for in-line dual carburetors. It allows for use of one carburetor during normal driving and both carburetors at wide open throttle. It is made in the U.S.A. It has a lifetime warranty.

Features

  • Lokar a trusted industry leader
  • Backed by manufacturer's Warranty
  • Great Performance
  • Enhance your vehicle
  • Fast Shipping
  • See more on Amazon...

Brand: Lokar   |   Manufacturer: Lokar

Item Dimensions: 0.5 x 5.75 x 11.75 inches (1.3 x 14.6 x 29.8 cm)   |   Package Dimensions: 0.1 x 5.8 x 11.7 inches (0.3 x 14.7 x 29.7 cm)

First Available: 2011-09-24

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Allstar Performance ALL54160 Carburetor Linkage Kit with 27" Linkage Rod and Return Spring Kit

Model: ALL54160   |    Mpn: ALL54160   |    Ean: 0848238027693   |    PartNumber: ALL54160   |   Asin: B009Q77A74

The key to success in a car building project is access to high quality, reasonably priced parts that get the job done right. Each Allstar part is the result of our dedication to research and development. Once a need is established, parts are designed and manufactured by talented craftsmen, many of whom are racers and hot rodders themselves. Many Allstar Performance parts are one-of-a-kind; you won't find them anywhere else!

Features

  • Throttle Linkage - 24 in Long Rod - 2 Rod Ends - Return Bracket / Hardware / Springs - Aluminum / Steel - Black Anodize / Chrome - Universal - Kit Notes: This is a solid tube linkage that will require drilling and tapping if linkage is shortened. Use ALL54158 for hollow tube linkage kit that does not require drilling.
  • See more on Amazon...

Brand: Allstar   |   Manufacturer: Allstar Performance

Item Dimensions: 2.5 x 4.1 x 29.8 inches (6.4 x 10.4 x 75.7 cm)   |   Package Dimensions: 1 x 4 x 29.5 inches (2.5 x 10.2 x 74.9 cm)

First Available: 2012-10-13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Edelbrock 1873 CARBURETOR LINKAGE

Model: 1873   |    Mpn: 1873   |    Ean: 0085347018734   |    PartNumber: 1873   |   Asin: B000CN504Q

The Edelbrock Carburetor Linkage Kit is used with the Thunder Series AVS (Adjustable Valve Secondary) Carburetors. The kit includes one each of 7 links with a black finish and 6 retaining clips.

Features

  • Kit for Thunder Series AVS Carburetors
  • Includes 1 each of 7 links in a black finish
  • Kit has 6 retaining clips
  • Comes with an added twist and a quick tune secondary air valve
  • These CNC-profiled, ball-burnished aluminum carburetors feature black accented hardware and GM/AMC throttle linkage
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Package Dimensions: 1.8 x 3 x 5.9 inches (4.6 x 7.6 x 15.0 cm)

First Available: 2012-06-05

Warranty: 90 Day Manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Allstar ALL54261 Black Anodized Throttle Bracket Replacement End for GM Style Throttle Cable

Model: ALL54261   |    Mpn: ALL54261   |    Ean: 0848238028010   |    PartNumber: ALL54261   |   Asin: B006K8NTLS

Allstar Black Anodized Throttle Bracket Replacement End for GM Style Throttle Cable features a throttle bracket replacement end. It is for a Ford style throttle cable and features a black anodized finish. The product allows throttle cable assemblies to be changed without having to purchase a whole new kit. It is backed by a 90-day limited factory warranty and is sold individually.

Features

  • Throttle bracket replacement end is for a GM style throttle cable
  • Black anodized finish
  • This product allows throttle cable assemblies to be changed without having to purchase a whole new kit
  • Backed by a 90-day limited factory warranty
  • Sold each
  • See more on Amazon...

Brand: Allstar   |   Manufacturer: Allstar Performance

Item Dimensions: 17.16 x 48 x 84 inches (43.6 x 121.9 x 213.4 cm)   |   Package Dimensions: 1.6 x 3.2 x 4.1 inches (4.1 x 8.1 x 10.4 cm)

First Available: 2012-05-02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Holley 717-7 Marine Throttle Linkage Kit

Model: 717-7   |    Mpn: 7177   |    Ean: 0090127105436   |    PartNumber: 7177   |   Asin: B000M28WYM

The Holley marine throttle linkage kit is used when converting from original equipment carburetor.

Features

  • Kit includes everything needed to attach factory style MerCruiser cables to any plate style mounting
  • 90-day limited warranty
  • See more on Amazon...

Brand: Holley   |   Manufacturer: Holley

Package Dimensions: 2.2 x 2.8 x 3.5 inches (5.6 x 7.1 x 8.9 cm)

First Available: 2006-11-29

Warranty: 90 Days

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Lokar TCB-PLR2 8-5/8" to 9" Center Distance Progressive Linkage Rod for Edelbrock Carburetor

Model: TCB-PLR2   |    Mpn: TCB-PLR2   |    Ean: 0847087005524   |    PartNumber: TCB-PLR2   |   Asin: B005P6OEP6

Lokar 8-5/8 inch to 9 inch Center Distance Progressive Linkage Rod for Edelbrock Carburetor can be used for in-line dual carburetors. It allows for use of one carburetor during normal driving and both carburetors at wide open throttle. It is made in the U.S.A. It has a lifetime warranty.

Features

  • Lokar a trusted industry leader
  • Backed by manufacturer's Warranty
  • Great Performance
  • Enhance your vehicle
  • Fast Shipping
  • See more on Amazon...

Brand: Lokar   |   Manufacturer: Lokar

Item Dimensions: 0.5 x 5.75 x 11.75 inches (1.3 x 14.6 x 29.8 cm)   |   Package Dimensions: 0.5 x 4.8 x 11.3 inches (1.3 x 12.2 x 28.7 cm)

First Available: 2011-09-24

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Moroso 64920 Carburetor Linkage Bushing Set
  2. Trans-Dapt 2334 Morse Cable Bracket
  3. Lokar TCB-PLR1 6-3/8" to 6-3/4" Center Distance Progressive Linkage Rod for Edelbrock Carburetor
  4. Fast 304147 EZ-EFI Cable Mount Kit
  5. Mota Performance A40230 Carburetor Linkage Mounting Plate
  6. Edelbrock 7094 THROTTLE LINKAGE KIT
  7. Allstar Performance ALL54173 Right Quick Disconnect for Carburetor Linkage Kits
  8. Allstar Performance ALL54160 Carburetor Linkage Kit with 27" Linkage Rod and Return Spring Kit
  9. Edelbrock 1873 CARBURETOR LINKAGE
  10. Mr. Gasket 6026 Carburetor Bushing Kit

Most Wished For

  1. Fast 304147 EZ-EFI Cable Mount Kit
  2. Trans-Dapt 2334 Morse Cable Bracket
  3. Edelbrock 7094 THROTTLE LINKAGE KIT
  4. Mr. Gasket 3815 Carburetor Linkage Component
  5. Moroso 64920 Carburetor Linkage Bushing Set
  6. KRC 1040 Throttle Rod Kit
  7. Allstar Performance ALL54162 27" Aluminum Carburetor Linkage Rod with Two 1/4-28" Rod Ends
  8. Mota Performance A40230 Carburetor Linkage Mounting Plate
  9. Mr. Gasket 6026 Carburetor Bushing Kit
  10. Mr. Gasket 3830G Dual Quad Carburetor Linkage Kit

Most Gifted

  1. Moroso 64920 Carburetor Linkage Bushing Set
  2. Trans-Dapt 2334 Morse Cable Bracket
  3. Lokar TCB-PLR1 6-3/8" to 6-3/4" Center Distance Progressive Linkage Rod for Edelbrock Carburetor
  4. Fast 304147 EZ-EFI Cable Mount Kit
  5. Mota Performance A40230 Carburetor Linkage Mounting Plate
  6. Edelbrock 7094 THROTTLE LINKAGE KIT
  7. Allstar Performance ALL54173 Right Quick Disconnect for Carburetor Linkage Kits
  8. Allstar Performance ALL54160 Carburetor Linkage Kit with 27" Linkage Rod and Return Spring Kit
  9. Edelbrock 1873 CARBURETOR LINKAGE
  10. Mr. Gasket 6026 Carburetor Bushing Kit

Top Selling

  1. Moroso 64920 Carburetor Linkage Bushing Set
  2. Fast 304147 EZ-EFI Cable Mount Kit
  3. Mr. Gasket 3812G Rod End Carburetor Linkage Component-Two Per Set
  4. Mr. Gasket 6026 Carburetor Bushing Kit
  5. Allstar Performance ALL54173 Right Quick Disconnect for Carburetor Linkage Kits
  6. Edelbrock 7094 THROTTLE LINKAGE KIT
  7. Trans-Dapt 2334 Morse Cable Bracket
  8. Mota Performance A40230 Carburetor Linkage Mounting Plate
  9. Lokar TCB-PLR3 8-1/4" to 8-5/8" Center Distance Progressive Linkage Rod for Holley Carburetor
  10. Edelbrock 1444 METERING ROD



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.